Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Low-delay low-complexity error-correcting codes on sparse graphs

Hu, Xiao-Yu

Published Jan 1, 2003• 26 citations
Publisher

Abstract

This dissertation presents a systematic exposition on finite-block-length coding theory and practice. We begin with the task of identifying the maximum achievable rates over noisy, finite-block-length constrained channels, referred to as (ε, n)-capacity Cεn, with ε denoting target block-error probability and n the block length. We characterize how the optimum codes look like over finite-block-length constrained channels. Constructing good, short-block-length error-correcting codes defined on sparse graphs is the focus of the thesis. We propose a new, general method for constructing Tanner graphs having a large girth by progressively establishing edges or connections between symbol and check nodes in an edge-by-edge manner, called progressive edge-growth (PEG) construction. Lower bounds on the girth of PEG Tanner graphs and on the minimum distance of the resulting low-density parity-check (LDPC) codes are derived in terms of parameters of the graphs. The PEG construction attains essentially the same girth as Gallager's explicit construction for regular graphs, both of which meet or exceed an extension of the Erdös-Sachs bound. The PEG construction proves to be powerful for generating good, short-block-length binary LDPC codes. Furthermore, we show that the binary interpretation of GF(2b) codes on the cycle Tanner graph TG(2, dc), if b grows sufficiently large, can be used over the binary-input additive white Gaussian noise (AWGN) channel as "good code for optimum decoding" and "good code for iterative decoding". Codes on sparse graphs are often decoded iteratively by a sum-product algorithm (SPA) with low complexity. We investigate efficient digital implementations of the SPA for decoding binary LDPC codes from both the architectural and algorithmic point of view, and describe new reduced-complexity derivatives thereof. The unified treatment of decoding techniques for LDPC codes provides flexibility in selecting the appropriate design point in high-speed applications from a performance, latency, and computational complexity perspective.

DOI
10.5075/epfl-thesis-2681

Related papers

Progressive edge-growth Tanner graphs

Xiao-Yu Hu, Evangelos S. Eleftheriou, D.-M. Arnold

We propose a general method for constructing Tanner (1981) graphs with large girth by progressively establishing edges or connections between symbol and check nodes in an edge-by-edge manner, called progressive edge-growth (PEG) construction. Lower bounds on the girth and on the minimum distance of the resulting low-density parity-check (LDPC) codes are derived in terms or parameters of the graphs. Encoding of LDPC codes based on the PEG principle is also investigated. We show how to exploit the PEG graph construction to obtain LDPC codes that allow linear time encoding. The advantages of PEG Tanner graphs over randomly constructed graphs are demonstrated by extensive simulation results on code performance.

Globecom•Nov 13, 2002•489 citations

Regular and irregular progressive edge-growth tanner graphs

Xiao-Yu Hu, Evangelos S. Eleftheriou, Donald M. Arnold

We propose a general method for constructing Tanner graphs having a large girth by establishing edges or connections between symbol and check nodes in an edge-by-edge manner, called progressive edge-growth (PEG) algorithm. Lower bounds on the girth of PEG Tanner graphs and on the minimum distance of the resulting low-density parity-check (LDPC) codes are derived in terms of parameters of the graphs. Simple variations of the PEG algorithm can also be applied to generate linear-time encodeable LDPC codes. Regular and irregular LDPC codes using PEG Tanner graphs and allowing symbol nodes to take values over GF(q) (q>2) are investigated. Simulation results show that the PEG algorithm is a powerful algorithm to generate good short-block-length LDPC codes.

IEEE Transactions on Information Theory•Jan 1, 2005•1,482 citations

Binary representation of cycle Tanner-graph GF(2/sup b/) codes

X.-Yu. Hu, Evangelos S. Eleftheriou

We derive the average symbol and Hamming weight spectrum functions of the random ensemble of regular low-density parity-check (LDPC) codes over GF(2/sup b/) when used with the binary-input noisy channel. This work confirms theoretically that the near-Shannon-limit performance of Gallager's binary LDPC codes can be significantly enhanced by moving to fields of higher order. We construct a family of error-correcting codes based on the binary representation of GF(2/sup b/) codes defined on a cycle Tanner graph that appears to be "good" for both optimum and iterative decoding over the binary-input noisy channel. In particular, we report a short-block-length (1008 bits), rate-1/2 progressive-edge-growth-based cycle Tanner-graph code over GF(2/sup b/) with a block-error rate <10/sup -4/ at E/sub b//N/sub 0/=1.89 dB, which appears to exhibit the best iterative-decoding performance at this short block length known to date.

International Conference on Communications•Jan 1, 2004•91 citations

Improved progressive edge-growth algorithm for fast encodable LDPC codes

Xueqin Jiang, Moon Ho Lee, Jinpeng Qi

The progressive edge-growth (PEG) algorithm is known to construct low-density parity-check (LDPC) codes at finite code lengths with large girths by establishing edges between symbol and check nodes in an edge-by-edge manner. The linear-encoding PEG (LPEG) algorithm, a simple variation of the PEG algorithm, can be applied to generate linear time encodable LDPC codes whose m parity bits p1, p2, ..., p m are computed recursively in m steps. In this article, we propose modifications of the LPEG algorithm to construct LDPC codes whose number of encoding steps is independent of the code length. The maximum degree of the symbol nodes in the Tanner graph is denoted by ; The m parity bits of the proposed LDPC codes are divided into subgroups and can be computed in only steps. Since , the number of encoding steps can be significantly reduced. It has also been proved that the PEG codes and the codes proposed in this article have similar lower bound on girth. Simulation results showed that the proposed codes perform very well over the AWGN channel with an iterative decoding.

EURASIP Journal on Wireless Communications and Networking•May 21, 2012•7 citations

New PEG algorithm with low error floor for construction of irregular LDPC codes

Feijin Shi, Shuangshuang Han

The progressive-edge-growth (PEG) algorithm for constructing Tanner graphs with large girth by progressively establishing edges/connections between symbol nodes and check nodes in an edge-by-edge way is highly known to construct low-density parity-check (LDPC) codes at short block lengths for achieving good performance. This paper proposed an improved PEG construction for irregular codes, which heuristically selects good codes from random graphs for short block lengths. The simulation results are given to demonstrate that the proposed algorithm gians better BER performance for high signal-to-noise (SNR) ratios without performance loss for low-SNR region, i.e. low error floor.

IEEE International Conference on Computer and Communications (ICCC)•Oct 1, 2015•1 citation

On Lowering the Error Floor of Short-to-Medium Block Length Irregular Low Density Parity Check Codes

Umar-Faruk Abdu-Aguye

Gallager proposed and developed low density parity check (LDPC) codes in the early 1960s. LDPC codes were rediscovered in the early 1990s and shown to be capacity approaching over the additive white Gaussian noise (AWGN) channel. Subsequently, density evolution (DE) optimized symbol node degree distributions were used to significantly improve the decoding performance of short to medium length irregular LDPC codes. Currently, the short to medium length LDPC codes with the lowest error floor are DE optimized irregular LDPC codes constructed using progressive edge growth (PEG) algorithm modifications which are designed to increase the approximate cycle extrinsic message degrees (ACE) in the LDPC code graphs constructed. The aim of the present work is to find efficient means to improve on the error floor performance published for short to medium length irregular LDPC codes over AWGN channels in the literature. An efficient algorithm for determining the girth and ACE distributions in short to medium length LDPC code Tanner graphs has been proposed. A cyclic PEG (CPEG) algorithm which uses an edge connections sequence that results in LDPC codes with improved girth and ACE distributions is presented. LDPC codes with DE optimized/’good’ degree distributions which have larger minimum distances and stopping distances than previously published for LDPC codes of similar length and rate have been found. It is shown that increasing the minimum distance of LDPC codes lowers their error floor performance over AWGN channels; however, there are threshold minimum distances values above which there is no further lowering of the error floor performance. A minimum local girth (edge skipping) (MLG (ES)) PEG algorithm is presented; the algorithm controls the minimum local girth (global girth) connected in the Tanner graphs of LDPC codes constructed by forfeiting some edge connections. A technique for constructing optimal low correlated edge density (OED) LDPC codes based on modified DE optimized symbol node degree distributions and the MLG (ES) PEG algorithm modification is presented. OED rate-½ (n, k)=(512, 256) LDPC codes have been shown to have lower error floor over the AWGN channel than previously published for LDPC codes of similar length and rate. Similarly, consequent to an improved symbol node degree distribution, rate ½ (n, k)=(1024, 512) LDPC codes have been shown to have lower error floor over the AWGN channel than previously published for LDPC codes of similar length and rate. An improved BP/SPA (IBP/SPA) decoder, obtained by making two simple modifications to the standard BP/SPA decoder, has been shown to result in an unprecedented generalized improvement in the performance of short to medium length irregular LDPC codes under iterative message passing decoding. The superiority of the Slepian Wolf distributed source coding model over other distributed source coding models based on LDPC codes has been shown.

•Jan 1, 2018•0 citations
This dissertation presents a systematic exposition on finite-block-length coding theory and practice. We begin with the task of identifying the maximum achievable rates over noisy, finite-block-length constrained channels, referred to as (ε, n)-capacity Cεn, with ε denoting target block-error probability and n the block length. We characterize how the optimum codes look like over finite-block-length constrained channels. Constructing good, short-block-length error-correcting codes defined on sparse graphs is the focus of the thesis. We propose a new, general method for constructing Tanner graphs having a large girth by progressively establishing edges or connections between symbol and check nodes in an edge-by-edge manner, called progressive edge-growth (PEG) construction. Lower bounds on the girth of PEG Tanner graphs and on the minimum distance of the resulting low-density parity-check (LDPC) codes are derived in terms of parameters of the graphs. The PEG construction attains essentially the same girth as Gallager's explicit construction for regular graphs, both of which meet or exceed an extension of the Erdös-Sachs bound. The PEG construction proves to be powerful for generating good, short-block-length binary LDPC codes. Furthermore, we show that the binary interpretation of GF(2b) codes on the cycle Tanner graph TG(2, dc), if b grows sufficiently large, can be used over the binary-input additive white Gaussian noise (AWGN) channel as "good code for optimum decoding" and "good code for iterative decoding". Codes on sparse graphs are often decoded iteratively by a sum-product algorithm (SPA) with low complexity. We investigate efficient digital implementations of the SPA for decoding binary LDPC codes from both the architectural and algorithmic point of view, and describe new reduced-complexity derivatives thereof. The unified treatment of decoding techniques for LDPC codes provides flexibility in selecting the appropriate design point in high-speed applications from a performance, latency, and computational complexity perspective.
We propose a general method for constructing Tanner (1981) graphs with large girth by progressively establishing edges or connections between symbol and check nodes in an edge-by-edge manner, called progressive edge-growth (PEG) construction. Lower bounds on the girth and on the minimum distance of the resulting low-density parity-check (LDPC) codes are derived in terms or parameters of the graphs. Encoding of LDPC codes based on the PEG principle is also investigated. We show how to exploit the PEG graph construction to obtain LDPC codes that allow linear time encoding. The advantages of PEG Tanner graphs over randomly constructed graphs are demonstrated by extensive simulation results on code performance.
We propose a general method for constructing Tanner graphs having a large girth by establishing edges or connections between symbol and check nodes in an edge-by-edge manner, called progressive edge-growth (PEG) algorithm. Lower bounds on the girth of PEG Tanner graphs and on the minimum distance of the resulting low-density parity-check (LDPC) codes are derived in terms of parameters of the graphs. Simple variations of the PEG algorithm can also be applied to generate linear-time encodeable LDPC codes. Regular and irregular LDPC codes using PEG Tanner graphs and allowing symbol nodes to take values over GF(q) (q>2) are investigated. Simulation results show that the PEG algorithm is a powerful algorithm to generate good short-block-length LDPC codes.
We derive the average symbol and Hamming weight spectrum functions of the random ensemble of regular low-density parity-check (LDPC) codes over GF(2/sup b/) when used with the binary-input noisy channel. This work confirms theoretically that the near-Shannon-limit performance of Gallager's binary LDPC codes can be significantly enhanced by moving to fields of higher order. We construct a family of error-correcting codes based on the binary representation of GF(2/sup b/) codes defined on a cycle Tanner graph that appears to be "good" for both optimum and iterative decoding over the binary-input noisy channel. In particular, we report a short-block-length (1008 bits), rate-1/2 progressive-edge-growth-based cycle Tanner-graph code over GF(2/sup b/) with a block-error rate <10/sup -4/ at E/sub b//N/sub 0/=1.89 dB, which appears to exhibit the best iterative-decoding performance at this short block length known to date.
The progressive edge-growth (PEG) algorithm is known to construct low-density parity-check (LDPC) codes at finite code lengths with large girths by establishing edges between symbol and check nodes in an edge-by-edge manner. The linear-encoding PEG (LPEG) algorithm, a simple variation of the PEG algorithm, can be applied to generate linear time encodable LDPC codes whose m parity bits p1, p2, ..., p m are computed recursively in m steps. In this article, we propose modifications of the LPEG algorithm to construct LDPC codes whose number of encoding steps is independent of the code length. The maximum degree of the symbol nodes in the Tanner graph is denoted by ; The m parity bits of the proposed LDPC codes are divided into subgroups and can be computed in only steps. Since , the number of encoding steps can be significantly reduced. It has also been proved that the PEG codes and the codes proposed in this article have similar lower bound on girth. Simulation results showed that the proposed codes perform very well over the AWGN channel with an iterative decoding.
The progressive-edge-growth (PEG) algorithm for constructing Tanner graphs with large girth by progressively establishing edges/connections between symbol nodes and check nodes in an edge-by-edge way is highly known to construct low-density parity-check (LDPC) codes at short block lengths for achieving good performance. This paper proposed an improved PEG construction for irregular codes, which heuristically selects good codes from random graphs for short block lengths. The simulation results are given to demonstrate that the proposed algorithm gians better BER performance for high signal-to-noise (SNR) ratios without performance loss for low-SNR region, i.e. low error floor.
Gallager proposed and developed low density parity check (LDPC) codes in the early 1960s. LDPC codes were rediscovered in the early 1990s and shown to be capacity approaching over the additive white Gaussian noise (AWGN) channel. Subsequently, density evolution (DE) optimized symbol node degree distributions were used to significantly improve the decoding performance of short to medium length irregular LDPC codes. Currently, the short to medium length LDPC codes with the lowest error floor are DE optimized irregular LDPC codes constructed using progressive edge growth (PEG) algorithm modifications which are designed to increase the approximate cycle extrinsic message degrees (ACE) in the LDPC code graphs constructed. The aim of the present work is to find efficient means to improve on the error floor performance published for short to medium length irregular LDPC codes over AWGN channels in the literature. An efficient algorithm for determining the girth and ACE distributions in short to medium length LDPC code Tanner graphs has been proposed. A cyclic PEG (CPEG) algorithm which uses an edge connections sequence that results in LDPC codes with improved girth and ACE distributions is presented. LDPC codes with DE optimized/’good’ degree distributions which have larger minimum distances and stopping distances than previously published for LDPC codes of similar length and rate have been found. It is shown that increasing the minimum distance of LDPC codes lowers their error floor performance over AWGN channels; however, there are threshold minimum distances values above which there is no further lowering of the error floor performance. A minimum local girth (edge skipping) (MLG (ES)) PEG algorithm is presented; the algorithm controls the minimum local girth (global girth) connected in the Tanner graphs of LDPC codes constructed by forfeiting some edge connections. A technique for constructing optimal low correlated edge density (OED) LDPC codes based on modified DE optimized symbol node degree distributions and the MLG (ES) PEG algorithm modification is presented. OED rate-½ (n, k)=(512, 256) LDPC codes have been shown to have lower error floor over the AWGN channel than previously published for LDPC codes of similar length and rate. Similarly, consequent to an improved symbol node degree distribution, rate ½ (n, k)=(1024, 512) LDPC codes have been shown to have lower error floor over the AWGN channel than previously published for LDPC codes of similar length and rate. An improved BP/SPA (IBP/SPA) decoder, obtained by making two simple modifications to the standard BP/SPA decoder, has been shown to result in an unprecedented generalized improvement in the performance of short to medium length irregular LDPC codes under iterative message passing decoding. The superiority of the Slepian Wolf distributed source coding model over other distributed source coding models based on LDPC codes has been shown.