Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Non-classical light for quantum information

Elizabeth A. Goldschmidt

Published Jan 1, 2013• 1 citation
OpenAlex

Abstract

Non-classical light is both easily encoded with quantum information and robust against decoherence, making it a key resource that enables many quantum information applications including quantum computing, quantum communication, and quantum metrology. We present a wide range of experimental and theoretical research toward the generation, detection, characterization, and storage of non-classical states of light with an eye toward quantum information applications. To provide a basis for the rest of the work, we begin by discussing theoretically the role of photon number statistics in optical quantum information and the use of second-order optical coherence to characterize non-classical light. Building on that, we present an original tool for the difficult problem of reconstructing the underlying mode distribution of multi-mode optical fields using simple measurements of higher-order optical coherence. We then move on to the problem of generating and storing single photons. We do this in a solid-state medium, a rare-earth ion-doped crystal, with a long-lived spin transition ideal for storing quantum information. We experimentally demonstrate the feasibility of this concept by showing correlations between the optical fields that herald storage and retrieval of collective excitations. This scheme can be used for the two important and distinct applications of generating single photons on-demand and storing quantum information and entanglement. The detection of non-classical light is a task as important as its generation. To this end, we study detectors with near unity detection efficiency and photon number resolution for use in quantum-enabled metrology. We use such a detector to experimentally demonstrate compression of spatial fringes and investigate the possibility of improving measurement resolution with classical and non-classical light. Finally, we report a set of experiments using photon number statistics to characterize classical and non-classical light. We measure suppression of unwanted multi-photon emission in a heralded single photon source based on four-wave mixing in microstructure optical fiber. And we, for the first time, experimentally demonstrate reconstruction of multi-mode classical and non-classical light from measured photon number statistics.

Related papers

Photon Number Resolution via Multi-Photon Subtraction in a Waveguide-QED Setting

Abdolreza Pasharavesh, Sai Sreesh Venuturumilli, Michal Bajcsy

A description of states of light in terms of photons allows for a clear delineation between classical and non-classical light. The development of single-photon sources and detectors has enabled experimental studies of quantum light at the single-photon level, proving essential for applications in quantum communication, sensing, and imaging. Multi-photon quantum states, existing in higher-dimensional spaces, extend these applications and open opportunities to study the rich space of non-classical light states. Platforms for sourcing and characterizing such states have been increasingly explored to leverage the quantum resources they offer. Arithmetic operations of photon addition and subtraction, allow for generating non-classical multi-photon light from classical sources like coherent and squeezed states, as well as for photon-number-resolved (PNR) detection. PNR detection is essential for characterizing multi-photon states,providing access to their photon-number distributions and higher-order correlations, and enabling advanced quantum tomography.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 23, 2025•0 citations

Towards storage and retrieval of non-classical light in a broadband quantum memory - An investigation of free-space and cavity Raman memories

T. F. M. Champion

Photonic quantum information processing has emerged as a powerful platform for realising quantum-enhanced technologies. In order to be scalable, many of these technologies depend on the availability of a suitable quantum memory for the coherent storage and on-demand retrieval of photonic quantum states. In this thesis, I investigate broadband light storage in a room-temperature Raman memory, implemented both in free space and, for the first time, inside a low-finesse optical cavity designed for low-noise operation. The ability of the Raman memory to preserve phase coherence was tested by storing coherent polarisation states in two spatially separate atomic ensembles. Polarisation storage with a fidelity of up to 97 ± 1% was demonstrated by performing full process tomography on the system. The Raman memory was then interfaced for the first time with a spontaneous parametric downconversion (SPDC) source of heralded, GHz-bandwidth single photons. The memory performance was characterised by measuring the second-order autocorrelation of the retrieved fields. While the SPDC input photon statistics showed a clear influence on the statistics of the retrieved field, four-wave mixing (FWM) noise, stimulated by spontaneous Raman scattering, prevented the preservation of non-classical photon statistics during read-out. Suppressing this source of noise represents the last remaining challenge for realising a broadband single-photon Raman memory suitable for quantum information applications. To this end, I demonstrate a novel cavity implementation of the Raman memory which reduces the FWM contribution relative to the signal field by re-distributing the density of states into which the noise photons can be scattered. Cavity-enhanced memory operation was investigated using weak coherent input states, showing a significant improvement of the signal-to-noise ratio compared to the free-space memory implementation. This proof-of-principle demonstration suggests that cavity Raman memories may offer a practical route towards low-noise, high-bandwidth quantum storage at room temperature.

•Jan 1, 2015•0 citations

Manipulation and Measurement of Nonclassical States of Light with Atomic Ensembles

박광균

Quantum lights have been the essential sources for exploring fundamental quantum effects in quantum optics and for carrying out novel quantum protocols in quantum computation and quantum communication. Because photons do not interact with each other in free-space, some kinds of mediums for the interac- tion are required for generating the non-classical lights via parametric processes and for storing and trapping the photons. For the coherent light-matter interac- tions, atoms, the natural particles, have been the ideal platform for their natural indistinguishability. In this dissertation, a series of experiments in an atomic ensemble are described where several properties of photons are manipulated and the quantum states of photons are measured. \nThe first part of this dissertation is the manipulation of photons. In chapter II, a coherent and dynamic beam splitter based on light storage in cold atoms is demonstrated. An input weak laser pulse is first stored in a cold atom ensemble via electromagnetically-induced transparency. A set of counter-propagating control fields, applied at a later time, retrieves the stored pulse into two output spatial modes. Furthermore, by manipulating the control lasers, it is possible to dynamically control the storage time, the power splitting ratio, the relative phase, and the optical frequencies of the output pulses. In chapter IV, the devel- opment of an optical quantum memory with a rubidium-87 cold atom ensemble is reported. By increasing the optical depth of the medium, I achieved a storage e ciency of 65% and a coherence time of 51 μs for a weak laser pulse. In chapter V, I demonstrate the trapping of a single photon whose group velocity becomes zero in a cold atomic ensemble, known as the stationary light. A single collective excitation, known as the spinwave, is first heralded via a writhing pulse. Then, the spinwave is retrieved as the photonic excitation by applying the two counter- propagating reading pulses. Due to the interference of these fields, the single photon stationary light is formed in the cold atomic ensemble. \nThe second part of this dissertation is the measurement of photons. In chapter III, stimulated emission tomography of the frequency-time two-photon wavefunction of narrowband entangled photons from cold atoms is demonstrated. Complete characterization of the narrowband entangled photons requires acquir- ing the frequency-time two-photon wavefunction, involving both joint temporal intensity (JTI) and joint temporal phase (JTP) measurements. Over six orders of magnitude improvement in the measurement time for obtaining JTI and JTP is shown comparing to the conventional direct photon counting method, thus paving the way toward ultrafast high-resolution quantum tomography of pho- tonic quantum states.

•Jan 1, 2017•0 citations

Smart Quantum Technologies using Photons

Narayan Bhusal

The technologies utilizing quantum states of light have been in the spotlight for the last two decades. In this regard, quantum metrology, quantum imaging, quantum-optical communication are some of the important applications that exploit fascinating quantum properties like quantum superposition, quantum correlations, and nonclassical photon statistics. However, the state-of-art technologies operating at the single-photon level are not robust enough to truly realize a reliable quantum-photonic technology. In Chapter 1, I present a historical account of photon-based technologies. Furthermore, I discuss recent efforts and encouraging developments in the field of quantum-photonic technologies, and major challenges for the experimental realization of reliable quantum technologies utilizing photons, setting up a stage for unveiling our smart methodologies to cope with them. Similarly, in Chapter 2, I review the fundamental concepts such as states of light, spatial modes of light, and machine learning. In Chapter 3 of this dissertation, I present a theoretical work on a nonlinear quantum metrology scheme, showing a sub-shot-noise limited phase estimation using the displaced-squeezed light and on/off detection. Furthermore, I discuss a camera-based squeezed-light detection technique that can be a smart and time-efficient alternative to conventional balanced-homodyne detection. In Chapter 4, I discuss our efforts to incorporate artificial intelligence in a quest to improve the efficiency of discriminating thermal light sources from coherent light sources. The conventional identification technique requires a large number of measurements. We utilize artificial neural networks to dramatically reduce the number of measurements required to distinguish thermal light and coherent light. In Chapter 5, I present a communication protocol that utilizes the spatial modes of light. Despite being valuable resources for a wide variety of quantum technologies, spatial modes of light are extremely vulnerable to random phase fluctuations. The conventional techniques to cope with these challenges are relatively inefficient. We utilize convolutional neural networks to perform the spatial mode correction of single photons, resulting in a near-unity fidelity of correction. I wrap up my dissertation in Chapter 6 by summarizing the historical context of quantum technologies, challenging problems facing state-of-art quantum technologies, and the importance of our efforts to introduce artificial intelligence in photonic technologies.

arXiv:2103.07081•Civil War Book Review•Mar 8, 2021•3 citations

Generation and detection of non-classical photon states

Katarina Stensson

This thesis intends to familiarize the reader with the concepts of photon statistics and correlations in quantum optics. Developing light sources that emit quantum states is central for the realization of quantum technologies. One important step in characterizing these sources is the measurement of field fluctuations and correlations, by coincidence measurements. The expectation value of a coincidence measurement, a simultaneous measurement of two intensities (or, more general, four fields), is represented by the fourth-order correlation function. The value of the correlation function, at zero delay between the detection of two photons, reveals important properties of the state to which they belonged, for example the fluctuations of the photon number. Since predictability is important for many applications, light sources emitting single photons are also characterized by the indistinguishability of consecutively emitted photons, or of two photons from separate emitters. In paper I we investigate blinking behaviour in quantum emitters, and its effect on the interference pattern and photon statistics with photons from two separate emitters. Blinking refers to an emitters transition into a non-emitting state, and subsequent transition back to an emitting state. We show that blinking can not be treated as linear loss, when measuring the fourth-order correlation function for two emitters in a Hong-Ou-Mandel setup. In general, a measurement of the fourth-order correlation function is robust to loss, which makes it a very practical tool. However, the relation between recorded coincidence counts and the correlation function is only direct in the limit of zero detection efficiency, and depends on the detection system. In paper II, we show that by adding a variable attenuation in the beam path, we can trace back to the ''true'' value of the correlation function at zero quantum efficiency. This method improves accuracy in correlation measurements by decreasing a systematic error at the expense of an increased statistical error, which is easier to handle, extending the use of coincidence methods to classical and non-classical multi-photon states.

•Jan 1, 2018•0 citations

Pure sources and efficient detectors for optical quantum information processing

Kevin Zielnicki

Over the last sixty years, classical information theory has revolutionized the understanding of the nature of information, and how it can be quantified and manipulated. Quantum information processing extends these lessons to quantum systems, where the properties of intrinsic uncertainty and entanglement fundamentally defy classical explanation. This growing field has many potential applications, including computing, cryptography, communication, and metrology. As inherently mobile quantum particles, photons are likely to play an important role in any mature large-scale quantum information processing system. However, the available methods for producing and detecting complex multi-photon states place practical limits on the feasibility of sophisticated optical quantum information processing experiments. In a typical quantum information protocol, a source first produces an interesting or useful quantum state (or set of states), perhaps involving superposition or entanglement. Then, some manipulations are performed on this state, perhaps involving quantum logic gates which further manipulate or entangle the intial state. Finally, the state must be detected, obtaining some desired measurement result, e.g., for secure communication or computationally efficient factoring. The work presented here concerns the first and last stages of this process as they relate to photons: sources and detectors. Our work on sources is based on the need for optimized non-classical states of light delivered at high rates, particularly of single photons in a pure quantum state. We seek to better understand the properties of spontaneous parameteric downconversion (SPDC) sources of photon pairs, and in doing so, produce such an optimized source. We report an SPDC source which produces pure heralded single photons with little or no spectral filtering, allowing a significant rate enhancement. Our work on detectors is based on the need to reliably measure single-photon states. We have focused on optimizing the detection efficiency of visible light photon counters (VLPCs), a single-photon detection technology that is also capable of resolving photon number states. We report a record-breaking quantum efficiency of 91 +/- 3% observed with our detection system. Both sources and detectors are independently interesting physical systems worthy of study, but together they promise to enable entire new classes and applications of information based on quantum mechanics.

•Sep 16, 2014•0 citations
Non-classical light is both easily encoded with quantum information and robust against decoherence, making it a key resource that enables many quantum information applications including quantum computing, quantum communication, and quantum metrology. We present a wide range of experimental and theoretical research toward the generation, detection, characterization, and storage of non-classical states of light with an eye toward quantum information applications. To provide a basis for the rest of the work, we begin by discussing theoretically the role of photon number statistics in optical quantum information and the use of second-order optical coherence to characterize non-classical light. Building on that, we present an original tool for the difficult problem of reconstructing the underlying mode distribution of multi-mode optical fields using simple measurements of higher-order optical coherence. We then move on to the problem of generating and storing single photons. We do this in a solid-state medium, a rare-earth ion-doped crystal, with a long-lived spin transition ideal for storing quantum information. We experimentally demonstrate the feasibility of this concept by showing correlations between the optical fields that herald storage and retrieval of collective excitations. This scheme can be used for the two important and distinct applications of generating single photons on-demand and storing quantum information and entanglement. The detection of non-classical light is a task as important as its generation. To this end, we study detectors with near unity detection efficiency and photon number resolution for use in quantum-enabled metrology. We use such a detector to experimentally demonstrate compression of spatial fringes and investigate the possibility of improving measurement resolution with classical and non-classical light. Finally, we report a set of experiments using photon number statistics to characterize classical and non-classical light. We measure suppression of unwanted multi-photon emission in a heralded single photon source based on four-wave mixing in microstructure optical fiber. And we, for the first time, experimentally demonstrate reconstruction of multi-mode classical and non-classical light from measured photon number statistics.
A description of states of light in terms of photons allows for a clear delineation between classical and non-classical light. The development of single-photon sources and detectors has enabled experimental studies of quantum light at the single-photon level, proving essential for applications in quantum communication, sensing, and imaging. Multi-photon quantum states, existing in higher-dimensional spaces, extend these applications and open opportunities to study the rich space of non-classical light states. Platforms for sourcing and characterizing such states have been increasingly explored to leverage the quantum resources they offer. Arithmetic operations of photon addition and subtraction, allow for generating non-classical multi-photon light from classical sources like coherent and squeezed states, as well as for photon-number-resolved (PNR) detection. PNR detection is essential for characterizing multi-photon states,providing access to their photon-number distributions and higher-order correlations, and enabling advanced quantum tomography.
Photonic quantum information processing has emerged as a powerful platform for realising quantum-enhanced technologies. In order to be scalable, many of these technologies depend on the availability of a suitable quantum memory for the coherent storage and on-demand retrieval of photonic quantum states. In this thesis, I investigate broadband light storage in a room-temperature Raman memory, implemented both in free space and, for the first time, inside a low-finesse optical cavity designed for low-noise operation. The ability of the Raman memory to preserve phase coherence was tested by storing coherent polarisation states in two spatially separate atomic ensembles. Polarisation storage with a fidelity of up to 97 ± 1% was demonstrated by performing full process tomography on the system. The Raman memory was then interfaced for the first time with a spontaneous parametric downconversion (SPDC) source of heralded, GHz-bandwidth single photons. The memory performance was characterised by measuring the second-order autocorrelation of the retrieved fields. While the SPDC input photon statistics showed a clear influence on the statistics of the retrieved field, four-wave mixing (FWM) noise, stimulated by spontaneous Raman scattering, prevented the preservation of non-classical photon statistics during read-out. Suppressing this source of noise represents the last remaining challenge for realising a broadband single-photon Raman memory suitable for quantum information applications. To this end, I demonstrate a novel cavity implementation of the Raman memory which reduces the FWM contribution relative to the signal field by re-distributing the density of states into which the noise photons can be scattered. Cavity-enhanced memory operation was investigated using weak coherent input states, showing a significant improvement of the signal-to-noise ratio compared to the free-space memory implementation. This proof-of-principle demonstration suggests that cavity Raman memories may offer a practical route towards low-noise, high-bandwidth quantum storage at room temperature.
Quantum lights have been the essential sources for exploring fundamental quantum effects in quantum optics and for carrying out novel quantum protocols in quantum computation and quantum communication. Because photons do not interact with each other in free-space, some kinds of mediums for the interac- tion are required for generating the non-classical lights via parametric processes and for storing and trapping the photons. For the coherent light-matter interac- tions, atoms, the natural particles, have been the ideal platform for their natural indistinguishability. In this dissertation, a series of experiments in an atomic ensemble are described where several properties of photons are manipulated and the quantum states of photons are measured. \nThe first part of this dissertation is the manipulation of photons. In chapter II, a coherent and dynamic beam splitter based on light storage in cold atoms is demonstrated. An input weak laser pulse is first stored in a cold atom ensemble via electromagnetically-induced transparency. A set of counter-propagating control fields, applied at a later time, retrieves the stored pulse into two output spatial modes. Furthermore, by manipulating the control lasers, it is possible to dynamically control the storage time, the power splitting ratio, the relative phase, and the optical frequencies of the output pulses. In chapter IV, the devel- opment of an optical quantum memory with a rubidium-87 cold atom ensemble is reported. By increasing the optical depth of the medium, I achieved a storage e ciency of 65% and a coherence time of 51 μs for a weak laser pulse. In chapter V, I demonstrate the trapping of a single photon whose group velocity becomes zero in a cold atomic ensemble, known as the stationary light. A single collective excitation, known as the spinwave, is first heralded via a writhing pulse. Then, the spinwave is retrieved as the photonic excitation by applying the two counter- propagating reading pulses. Due to the interference of these fields, the single photon stationary light is formed in the cold atomic ensemble. \nThe second part of this dissertation is the measurement of photons. In chapter III, stimulated emission tomography of the frequency-time two-photon wavefunction of narrowband entangled photons from cold atoms is demonstrated. Complete characterization of the narrowband entangled photons requires acquir- ing the frequency-time two-photon wavefunction, involving both joint temporal intensity (JTI) and joint temporal phase (JTP) measurements. Over six orders of magnitude improvement in the measurement time for obtaining JTI and JTP is shown comparing to the conventional direct photon counting method, thus paving the way toward ultrafast high-resolution quantum tomography of pho- tonic quantum states.
The technologies utilizing quantum states of light have been in the spotlight for the last two decades. In this regard, quantum metrology, quantum imaging, quantum-optical communication are some of the important applications that exploit fascinating quantum properties like quantum superposition, quantum correlations, and nonclassical photon statistics. However, the state-of-art technologies operating at the single-photon level are not robust enough to truly realize a reliable quantum-photonic technology. In Chapter 1, I present a historical account of photon-based technologies. Furthermore, I discuss recent efforts and encouraging developments in the field of quantum-photonic technologies, and major challenges for the experimental realization of reliable quantum technologies utilizing photons, setting up a stage for unveiling our smart methodologies to cope with them. Similarly, in Chapter 2, I review the fundamental concepts such as states of light, spatial modes of light, and machine learning. In Chapter 3 of this dissertation, I present a theoretical work on a nonlinear quantum metrology scheme, showing a sub-shot-noise limited phase estimation using the displaced-squeezed light and on/off detection. Furthermore, I discuss a camera-based squeezed-light detection technique that can be a smart and time-efficient alternative to conventional balanced-homodyne detection. In Chapter 4, I discuss our efforts to incorporate artificial intelligence in a quest to improve the efficiency of discriminating thermal light sources from coherent light sources. The conventional identification technique requires a large number of measurements. We utilize artificial neural networks to dramatically reduce the number of measurements required to distinguish thermal light and coherent light. In Chapter 5, I present a communication protocol that utilizes the spatial modes of light. Despite being valuable resources for a wide variety of quantum technologies, spatial modes of light are extremely vulnerable to random phase fluctuations. The conventional techniques to cope with these challenges are relatively inefficient. We utilize convolutional neural networks to perform the spatial mode correction of single photons, resulting in a near-unity fidelity of correction. I wrap up my dissertation in Chapter 6 by summarizing the historical context of quantum technologies, challenging problems facing state-of-art quantum technologies, and the importance of our efforts to introduce artificial intelligence in photonic technologies.
This thesis intends to familiarize the reader with the concepts of photon statistics and correlations in quantum optics. Developing light sources that emit quantum states is central for the realization of quantum technologies. One important step in characterizing these sources is the measurement of field fluctuations and correlations, by coincidence measurements. The expectation value of a coincidence measurement, a simultaneous measurement of two intensities (or, more general, four fields), is represented by the fourth-order correlation function. The value of the correlation function, at zero delay between the detection of two photons, reveals important properties of the state to which they belonged, for example the fluctuations of the photon number. Since predictability is important for many applications, light sources emitting single photons are also characterized by the indistinguishability of consecutively emitted photons, or of two photons from separate emitters. In paper I we investigate blinking behaviour in quantum emitters, and its effect on the interference pattern and photon statistics with photons from two separate emitters. Blinking refers to an emitters transition into a non-emitting state, and subsequent transition back to an emitting state. We show that blinking can not be treated as linear loss, when measuring the fourth-order correlation function for two emitters in a Hong-Ou-Mandel setup. In general, a measurement of the fourth-order correlation function is robust to loss, which makes it a very practical tool. However, the relation between recorded coincidence counts and the correlation function is only direct in the limit of zero detection efficiency, and depends on the detection system. In paper II, we show that by adding a variable attenuation in the beam path, we can trace back to the ''true'' value of the correlation function at zero quantum efficiency. This method improves accuracy in correlation measurements by decreasing a systematic error at the expense of an increased statistical error, which is easier to handle, extending the use of coincidence methods to classical and non-classical multi-photon states.
Over the last sixty years, classical information theory has revolutionized the understanding of the nature of information, and how it can be quantified and manipulated. Quantum information processing extends these lessons to quantum systems, where the properties of intrinsic uncertainty and entanglement fundamentally defy classical explanation. This growing field has many potential applications, including computing, cryptography, communication, and metrology. As inherently mobile quantum particles, photons are likely to play an important role in any mature large-scale quantum information processing system. However, the available methods for producing and detecting complex multi-photon states place practical limits on the feasibility of sophisticated optical quantum information processing experiments. In a typical quantum information protocol, a source first produces an interesting or useful quantum state (or set of states), perhaps involving superposition or entanglement. Then, some manipulations are performed on this state, perhaps involving quantum logic gates which further manipulate or entangle the intial state. Finally, the state must be detected, obtaining some desired measurement result, e.g., for secure communication or computationally efficient factoring. The work presented here concerns the first and last stages of this process as they relate to photons: sources and detectors. Our work on sources is based on the need for optimized non-classical states of light delivered at high rates, particularly of single photons in a pure quantum state. We seek to better understand the properties of spontaneous parameteric downconversion (SPDC) sources of photon pairs, and in doing so, produce such an optimized source. We report an SPDC source which produces pure heralded single photons with little or no spectral filtering, allowing a significant rate enhancement. Our work on detectors is based on the need to reliably measure single-photon states. We have focused on optimizing the detection efficiency of visible light photon counters (VLPCs), a single-photon detection technology that is also capable of resolving photon number states. We report a record-breaking quantum efficiency of 91 +/- 3% observed with our detection system. Both sources and detectors are independently interesting physical systems worthy of study, but together they promise to enable entire new classes and applications of information based on quantum mechanics.