Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Bulletin of the American Physical Society

Theoretical analysis of cold atom interferometers with optical control of dynamics

James Stickney, Dana Z. Anderson, Alex A. Zozulya

Published Jun 6, 2007• 0 citations
OpenAlex

Related papers

Analysis of cold-atom interferometer with optical beam splitting and recombination

Ebubechukwu O. Ilo-Okeke, Alex A. Zozulya

Bulletin of the American Physical Society•Jun 14, 2011•0 citations

A theoretical analysis of Bose-Einstein condensate based beamsplitters, interferometers, and transistors

James Stickney

Over the last several years considerable efforts have been made to develop Bose-Einstein condensate (BEC) based devices for a number of applications including fundamental research, precision measurements, and navgation systems. These devices, capable of complex functionality, can be built from simpler components which is currently done in both optics and microelectronics. These components include cold atom equivalents of beamsplitters, mirrors, waveguides, diodes, and transistors. The operation of the individual components must be fully understood before they can be assembled into a more complex device. The primary goal of this dissertation is to present a theoretical analysis of these components. It begins with a theoretical analysis of several different types of cold-atom beamsplitters in the context of BEC interferometry. Next, the dynamics of an interferometer that uses optical pulses to control the dynamics of the BEC will be presented. Finally, a proposal for a BEC based component that has behavior that is similar to an electronic transistor is introduced.

•Mar 27, 2008•2 citations

Cold atom interferometers and their applications in precision measurements

Jin Wang, Lin Zhou, Runbing Li +2 more

物理学前沿:英文版•May 4, 2009•16 citations

Phase stabilization of laser beams in a cold atom accelerometer

Nicole Byrne

A cold atom accelerometer measures the displacement of a proof mass of laser cooled atoms with respect to an instrument reference frame. The cold atom interferometer's reference frame is defined by a pair of specially prepared, counter-propagating laser beams, that measure inertially induced atom displacements with nm scale resolution. This corresponds to acceleration sensitivities comparable to state of the art electro-mechanical accelerometers. In dynamic environments, sensitivity is limited by the stability of the relative laser phase of the two interrogation laser beams, which is adversely affected by vibrations and temperature fluctuations of the interrogation beam optics. Without an independent measurement, the cold atom interferometer cannot distinguish platform acceleration from laser phase fluctuations, which thus are a potentially serious source of error. In this thesis, a Michelson optical interferometer and an optical feedback loop were used to stabilize the relative phase of the interrogation laser beams in a cold atom accelerometer. A digital controller stabilized the relative phase via an electro-optic phase modulator. This control loop's bandwidth encompasses 98.8% of the noise power as determined from the power spectral density of the open loop 795nm Michelson signal. Increasing the controller bandwidth would gain the system marginal improvement in noise reduction. At an atom interferometer dwell time of 1 msec, active laser phase stabilization improved the atom interferometer sensitivity; at an atom interferometer dwell time of 8msec, an improvement was no longer evident. Improvements to the laser phase stabilization system are proposed to increase atom interferometer stability at longer dwell times.

•Jan 1, 2014•0 citations

Optimization design of two-dimensional magneto optical trap field coils for cold atom interferometer

樊鹏格 Fan Pengge, 吴易明 Wu Yiming, 贾森 Jia Sen +1 more

\n\tHigh flux of cold atoms is one of the key technologies to realize high;precision cold atom interferometer. The approach of concatenation of two;dimensional Magnetic Optical Trap (2D;MOT) and three;dimensional Magnetic Optical Trap (3D;MOT) is generally used to obtain high flux of cold atoms. The magnetic field distribution of 2D;MOT is the key influencing factor in this appliance. In this paper, three different(rectangular, race;track and saddle) mathematical models of Anti;Helmholtz coils in 2D;MOT were established to analyze the magnetic field distribution. Then, the magnetic field zero drift and the change of magnetic field gradient caused by the error of eccentricity, coils asymmetry, parallelism and inside diameter asymmetry were analyzed, which were produced in the manufacture and installation process using finite element analysis. Results show that the magnetic field gradient provided by saddle coils is more conducive to produce high flux of cold atoms when eccentricity error is less than 1.14 mm, coils asymmetry error is less than 0.016 A and parallelism error is less than 1.02°. This work may provide theoretical guidance for the design and fabrication of magnetic system of 2D;MOT of cold atom interferometer. © 2016, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.

Infrared and Laser Engineering•Jan 1, 2016•1 citation

New guiding structures for atom interferometry with cold atoms

Alexey Tonyushkin, Mara Goff Prentiss

Bulletin of the American Physical Society•May 23, 2009•0 citations
Over the last several years considerable efforts have been made to develop Bose-Einstein condensate (BEC) based devices for a number of applications including fundamental research, precision measurements, and navgation systems. These devices, capable of complex functionality, can be built from simpler components which is currently done in both optics and microelectronics. These components include cold atom equivalents of beamsplitters, mirrors, waveguides, diodes, and transistors. The operation of the individual components must be fully understood before they can be assembled into a more complex device. The primary goal of this dissertation is to present a theoretical analysis of these components. It begins with a theoretical analysis of several different types of cold-atom beamsplitters in the context of BEC interferometry. Next, the dynamics of an interferometer that uses optical pulses to control the dynamics of the BEC will be presented. Finally, a proposal for a BEC based component that has behavior that is similar to an electronic transistor is introduced.
A cold atom accelerometer measures the displacement of a proof mass of laser cooled atoms with respect to an instrument reference frame. The cold atom interferometer's reference frame is defined by a pair of specially prepared, counter-propagating laser beams, that measure inertially induced atom displacements with nm scale resolution. This corresponds to acceleration sensitivities comparable to state of the art electro-mechanical accelerometers. In dynamic environments, sensitivity is limited by the stability of the relative laser phase of the two interrogation laser beams, which is adversely affected by vibrations and temperature fluctuations of the interrogation beam optics. Without an independent measurement, the cold atom interferometer cannot distinguish platform acceleration from laser phase fluctuations, which thus are a potentially serious source of error. In this thesis, a Michelson optical interferometer and an optical feedback loop were used to stabilize the relative phase of the interrogation laser beams in a cold atom accelerometer. A digital controller stabilized the relative phase via an electro-optic phase modulator. This control loop's bandwidth encompasses 98.8% of the noise power as determined from the power spectral density of the open loop 795nm Michelson signal. Increasing the controller bandwidth would gain the system marginal improvement in noise reduction. At an atom interferometer dwell time of 1 msec, active laser phase stabilization improved the atom interferometer sensitivity; at an atom interferometer dwell time of 8msec, an improvement was no longer evident. Improvements to the laser phase stabilization system are proposed to increase atom interferometer stability at longer dwell times.
\n\tHigh flux of cold atoms is one of the key technologies to realize high;precision cold atom interferometer. The approach of concatenation of two;dimensional Magnetic Optical Trap (2D;MOT) and three;dimensional Magnetic Optical Trap (3D;MOT) is generally used to obtain high flux of cold atoms. The magnetic field distribution of 2D;MOT is the key influencing factor in this appliance. In this paper, three different(rectangular, race;track and saddle) mathematical models of Anti;Helmholtz coils in 2D;MOT were established to analyze the magnetic field distribution. Then, the magnetic field zero drift and the change of magnetic field gradient caused by the error of eccentricity, coils asymmetry, parallelism and inside diameter asymmetry were analyzed, which were produced in the manufacture and installation process using finite element analysis. Results show that the magnetic field gradient provided by saddle coils is more conducive to produce high flux of cold atoms when eccentricity error is less than 1.14 mm, coils asymmetry error is less than 0.016 A and parallelism error is less than 1.02°. This work may provide theoretical guidance for the design and fabrication of magnetic system of 2D;MOT of cold atom interferometer. © 2016, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.