Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Energy transfer in erbium doped optical waveguides based on silicon

Pieter G. Kik

Published Sep 18, 2000• 11 citations
OpenAlex

Abstract

Energy transfer in erbium doped optical waveguides based on silicon This thesis describes the energy transfer processes\noccurring in materials that can be used for the fabrication of silicon compatible optical integrated circuits, operating at 1.54 mm.The thesis consists of three parts: Part I discusses energy transfer in optical waveguide amplifiers on silicon. The waveguide amplifiers use an intra-4f transition of the rare earth ion erbium occurring at 1.54 mm. To achieve significant amplification, high\n Er concentrations (> 10 20 cm -3 ) are required. At these concentrations Er ions can interact, resulting in co-operative\n upconversion, in which one excited Er ion is excited into a higher energy state, while a neighboring Er ion returns to the ground\n state. In Part I this and other gain limiting effects are investigated. In particular, it is shown that the atomic-scale Er distribution\n is of crucial importance for the performance of Er doped waveguide amplifiers. Part II discusses the energy transfer processes\n occurring in Er doped silicon. It is shown that Er in silicon can be excited by electron-hole pair recombination in an\n impurity-Auger effect. This effect may be used to fabricate an electrically pumped Er doped waveguide amplifier. The reverse\n process can also occur: an excited Er ion can de-excite and generate an electron-hole pair in the silicon, due to a non-radiative\n backtransfer process. This process has an efficiency of 70% at room temperature. This observation enables the fabrication of an\n Er doped photo-detector in a Si waveguide operating at 1.54 mm. The performance of such a detector is discussed. Part III\n discusses the interaction between Er and silicon nanocrystals embedded in SiO2. Si nanocrystals efficiently absorb visible light,\n resulting in the generation of quantum confined electron-hole pairs. The electron-hole pairs efficiently transfer energy to Er.\n Due to the energy transfer, the effective Er absorption cross section is five orders of magnitude larger than for direct optical\n excitation. Silicon nanocrystals may thus be used to increase the pumping efficiency of an Er doped waveguide amplifier. It is\n shown that a single nanocrystal can excite ~1 Er ion at a time and that an optical gain of 0.6 dB/cm may be achieved in a typical\n nanocrystal sensitized waveguide amplifier. Due to the broad absorption band of Si nanocrystals, a broad band light source can\n be used as pump source in such a nanocrystal sensitized Er doped waveguide amplifier.

Related papers

Energy Transfer Theory Between ER3+ Ion and Silicon Nanocrystal in Optical Cavity and Electric Field

Qing-Yi Guo

The need for higher bandwidth and people's desire to be "always connected" have spurred a new era of silicon photonics. The traditional integrated electrical transmission lines have been an obstacle preventing ultra high speed communication. Using monolithic chips of integrated optoelectronic circuits from silicon provides an economic way to realize Tetra Byte/Second bandwidth in a variety of areas such as "fiber to the home" and the buses linking chips inside computer. The heart of such optoelectronics-silicon laser-is still in pursuit. One of the most promising approaches is the erbium doped silicon nanocrystals embedded in silica system. External photon or hot electrons injection excites the silicon nanocrystals, which then transfer their energies to nearby erbium ions to emit light at 1.55 μm wavelength range. In this thesis, we investigate the effects of cavity and electric field on energy transfer from Si nanocrystals (Si-nc's) to Er ions, and simulate material gain in such systems. Our results show that microcavity can enhance the Forster energy transfer and material gain, reducing the requirements for Si-nc pumping. The electric field will hinder the radiation decay of Si-nc, but we have to further explore the tunneling mechanism before concluding the overall effect of electric field. Some future work needs to be done, which will shine some light on the design of the silicon laser.

•Oct 1, 2007•0 citations

Controlled spontaneous emission in erbium-doped microphotonic materials

Jeroen Kalkman

Erbium is a rare-earth metal that, when incorporated in a solid, can emit light at a wavelength of 1.5 μm. It plays a key role in current day telecommunication technology as the principle ingredient of optical fiber amplifiers. In this thesis the control of the Er spontaneous emission in three different types of microphotonic materials is described. Part I of this thesis focuses on the effect of a metallo-dielectric interface on the spontaneous emission of optical emitters in silica glass. It is shown that Er ions near a Ag interface can couple to surface plasmons (SPs) via a near-field interaction. By coupling SPs out into the far field, large changes in the Er photoluminescence emission distribution, spectra, and polarization can be observed. The excitation of SPs also results in an increase of the Er photoluminescence decay rate. The observed decay rates are in good agreement with calculations based on a classical dipole oscillator model. From the change in photoluminescence decay rate of Si nanocrystals near a Ag interface it is shown that Si nanocrystals can efficiently excite SPs and have an internal quantum efficiency of 77 %. Part II focuses on the effect of a microcavity on the spontaneous emission of Er and describes how ion implantation can be used to dope dielectric microresonators with optically active Er ions. The fabrication and characterization of an Er ion-implanted silica microsphere resonator is described that shows lasing at 1.5 μm when pumped above its lasing threshold. Ion implantation is also used to dope toroidal microcavities on a Si chip with Er. The microtoroids are doped by either pre-implantation into the SiO2 base material, or by post-implantation in a fully fabricated microtoroid. The optical activation of Er ions in the microtoroid is investigated and Er lasing at 1.5 μm is observed for both types of microcavities with the lowest threshold (4.5 μW) for the pre-implanted microtoroids. Part III describes the fabrication of an Er-doped Si-inverse opal photonic crystal. These photonic crystals can potentially have a photonic bandgap that can fully inhibit the spontaneous emission of on optical emitter. Fabrication criteria are derived for such a photonic crystal, based on the lattice parameter, filling fraction, and Si refractive index. In the opal photonic crystal composed of both Si and SiO2 we show that Er ions can be selectively excited in both the Si and SiO2 part of the photonic crystal by changing the excitation wavelength and/or the measurement temperature.

•Mar 9, 2005•3 citations

POPULATION INVERSION OF ERBIUM ION STATES CAUSED BY ENERGY TRANSFER FROM SILICON NANOCRYSTALS

Victor Yu. Timoshenko, Olga A. Shalygina, Denis M. Zhigunov +5 more

Structures of silicon nanocrystals in erbium-doped silicon dioxide ( nc-Si / SiO 2 : Er ) exhibit efficient photoluminescence of Er 3+ ions at 1.5 µm. The population inversion of Er 3+ energy states can be achieved under strong optical pumping because of the energy transfer from the excitons in Si nanocrystals to the ions. The results obtained are discussed in view of possible applications of nc-Si / SiO 2 : Er structures in optical amplifiers and lasers compatible with Si -based technology.

Physics, Chemistry and Application of Nanostructures•Apr 1, 2005•0 citations

INVESTIGATION OF LIGHT AMPLIFICATION IN SI-NANOCRYSTAL-ER DOPED OPTICAL FIBER

Ali Rostami, Ahmad Salmanogli

Abstract—In this article the details of Erbium doped Fiber Amplifier (EDFA) in presence of Silicon nanocrystal (Si-Nc) is investigated. In this analysis Si-Nc and Er ions in matrix of fiber are assumed two and five levels respectively. For this structure rate equation for transient and steady state analysis is considered. The range of Er (+3) concentration and pump intensity at 488 nm are considered [10 17 − 10 21]1/cm 3 and [10 17 − 10 23] photon/cm 2 · sec respectively in this paper. Based on numerical simulation of this problem we observed that with increasing of concentration of the Si-Nc the fiber length for given optical gain is decreased. For example in the case of 40 dB optical gain, we calculated fiber length to be 1.1 × 10 5 cm without Si-Nc and 5 × 10 2 cm for σCCa = 1 × 10 −17 cm 2 (confined carrier absorption cross-section) and 5 cm for σCCa =1 × 10 −19 cm 2 respectively. Our simulations show that for second level with increasing pump intensity the population rise and fall times are decreased. But, for third level the population rise time is decreased and fall time is depends to level of Er ion interactions. We observed that with increasing Er ions optical net gain is increased and finally has a maximum. After this special value of Er ions because of increasing in interaction between ions the net gain finally begin to decrease. In this analysis we let to Er ions have inhomogeneous distribution. Also, we observed that in this case with increasing of the distribution peak, the net gain is increased, interaction between ions is increased, the coupling coefficient to the Si-Ncs is increased and losses due to Si-Ncs are decreased. Finally effect of Kexiton (maximum number of exciton in single Si-Nc) on amplification process is considered and we observed that in the case of Kexiton = 2 the optical gain considerably and introduced losses due to Si-Nc are increased. 28 Rostami and SalmanOgli 1.

Progress In Electromagnetics Research B•Jan 1, 2008•15 citations

Recent Progress in On-Chip Erbium-Based Light Sources

Bo Wang, Peiqi Zhou, Xingjun Wang

In recent years, silicon photonics has achieved great success in optical communication area. More and more on-chip optoelectronic devices have been realized and commercialized on silicon photonics platform, such as silicon-based modulators, filters and detectors. However, on-chip light sources are still not achieved because that silicon is an indirect bandgap material. To solve this problem, the rare earth element erbium (Er) is considered, which emits light covering 1.5 μm to 1.6 μm and has been widely used in fiber amplifiers. Compared to Er-doped fiber amplifiers (EDFA), the Er ion concentration needs to be more than two orders higher for on-chip Er-based light sources due to the compact size integration requirements. Therefore, the choice of the host material is crucially important. In this paper, we review the recent progress in on-chip Er-based light sources and the advantages and disadvantages of different host materials are compared and analyzed. Finally, the existing challenges and development directions of the on-chip Er-based light sources are discussed.

Applied Sciences•Nov 18, 2022•14 citations

A theoretical investigation of the optical gain in waveguide based on a silica matrix containing silicon nanograins and doped either withNd3+ or with Er3+ ions

Alexandre Fafin, Julien Cardin, Christian Dufour +1 more

We aim to amplify a signal in a strip loaded waveguide composed by an active silica layer co-doped with silicon nanograins and rare-earth ions deposited on a silica cladding layer and topped by a silica strip. The signal wavelength corresponds to the transition wavelength between two energy levels of a rare earth ions. To achieve an efficient population inversion, the rare earth ions benefit from the indirect excitation via silicon nanograins which show an absorption cross section fourfold higher than the one of rare earth ions. In order to study the influence of the type of rare earth on the optical gain, we consider two rare earth ions : neodymium ions (Nd3+) for a signal wavelength at 1060 nm and erbium ions (Er3+) for a signal wavelength at 1540 nm. The optical gain is simulated using a modified two loops auxiliary-differential equation and finite-difference time-domain (ADE-FDTD) algorithm. Within this new scheme we can compute the steady state levels populations as well as the spatial distribution of the guided field in the waveguide whatever the populations levels lifetime considered. We also calculate the gross gain as well as the net gain by taking into account the experimental background losses. We demonstrate that a significant positive net gain can only be achieved with the Nd3+ doped waveguide up to 30 dB/cm for a pump power density of 10^4 mW/mm².

•May 11, 2015•0 citations
Energy transfer in erbium doped optical waveguides based on silicon This thesis describes the energy transfer processes\noccurring in materials that can be used for the fabrication of silicon compatible optical integrated circuits, operating at 1.54 mm.The thesis consists of three parts: Part I discusses energy transfer in optical waveguide amplifiers on silicon. The waveguide amplifiers use an intra-4f transition of the rare earth ion erbium occurring at 1.54 mm. To achieve significant amplification, high\n Er concentrations (> 10 20 cm -3 ) are required. At these concentrations Er ions can interact, resulting in co-operative\n upconversion, in which one excited Er ion is excited into a higher energy state, while a neighboring Er ion returns to the ground\n state. In Part I this and other gain limiting effects are investigated. In particular, it is shown that the atomic-scale Er distribution\n is of crucial importance for the performance of Er doped waveguide amplifiers. Part II discusses the energy transfer processes\n occurring in Er doped silicon. It is shown that Er in silicon can be excited by electron-hole pair recombination in an\n impurity-Auger effect. This effect may be used to fabricate an electrically pumped Er doped waveguide amplifier. The reverse\n process can also occur: an excited Er ion can de-excite and generate an electron-hole pair in the silicon, due to a non-radiative\n backtransfer process. This process has an efficiency of 70% at room temperature. This observation enables the fabrication of an\n Er doped photo-detector in a Si waveguide operating at 1.54 mm. The performance of such a detector is discussed. Part III\n discusses the interaction between Er and silicon nanocrystals embedded in SiO2. Si nanocrystals efficiently absorb visible light,\n resulting in the generation of quantum confined electron-hole pairs. The electron-hole pairs efficiently transfer energy to Er.\n Due to the energy transfer, the effective Er absorption cross section is five orders of magnitude larger than for direct optical\n excitation. Silicon nanocrystals may thus be used to increase the pumping efficiency of an Er doped waveguide amplifier. It is\n shown that a single nanocrystal can excite ~1 Er ion at a time and that an optical gain of 0.6 dB/cm may be achieved in a typical\n nanocrystal sensitized waveguide amplifier. Due to the broad absorption band of Si nanocrystals, a broad band light source can\n be used as pump source in such a nanocrystal sensitized Er doped waveguide amplifier.
The need for higher bandwidth and people's desire to be "always connected" have spurred a new era of silicon photonics. The traditional integrated electrical transmission lines have been an obstacle preventing ultra high speed communication. Using monolithic chips of integrated optoelectronic circuits from silicon provides an economic way to realize Tetra Byte/Second bandwidth in a variety of areas such as "fiber to the home" and the buses linking chips inside computer. The heart of such optoelectronics-silicon laser-is still in pursuit. One of the most promising approaches is the erbium doped silicon nanocrystals embedded in silica system. External photon or hot electrons injection excites the silicon nanocrystals, which then transfer their energies to nearby erbium ions to emit light at 1.55 μm wavelength range. In this thesis, we investigate the effects of cavity and electric field on energy transfer from Si nanocrystals (Si-nc's) to Er ions, and simulate material gain in such systems. Our results show that microcavity can enhance the Forster energy transfer and material gain, reducing the requirements for Si-nc pumping. The electric field will hinder the radiation decay of Si-nc, but we have to further explore the tunneling mechanism before concluding the overall effect of electric field. Some future work needs to be done, which will shine some light on the design of the silicon laser.
Erbium is a rare-earth metal that, when incorporated in a solid, can emit light at a wavelength of 1.5 μm. It plays a key role in current day telecommunication technology as the principle ingredient of optical fiber amplifiers. In this thesis the control of the Er spontaneous emission in three different types of microphotonic materials is described. Part I of this thesis focuses on the effect of a metallo-dielectric interface on the spontaneous emission of optical emitters in silica glass. It is shown that Er ions near a Ag interface can couple to surface plasmons (SPs) via a near-field interaction. By coupling SPs out into the far field, large changes in the Er photoluminescence emission distribution, spectra, and polarization can be observed. The excitation of SPs also results in an increase of the Er photoluminescence decay rate. The observed decay rates are in good agreement with calculations based on a classical dipole oscillator model. From the change in photoluminescence decay rate of Si nanocrystals near a Ag interface it is shown that Si nanocrystals can efficiently excite SPs and have an internal quantum efficiency of 77 %. Part II focuses on the effect of a microcavity on the spontaneous emission of Er and describes how ion implantation can be used to dope dielectric microresonators with optically active Er ions. The fabrication and characterization of an Er ion-implanted silica microsphere resonator is described that shows lasing at 1.5 μm when pumped above its lasing threshold. Ion implantation is also used to dope toroidal microcavities on a Si chip with Er. The microtoroids are doped by either pre-implantation into the SiO2 base material, or by post-implantation in a fully fabricated microtoroid. The optical activation of Er ions in the microtoroid is investigated and Er lasing at 1.5 μm is observed for both types of microcavities with the lowest threshold (4.5 μW) for the pre-implanted microtoroids. Part III describes the fabrication of an Er-doped Si-inverse opal photonic crystal. These photonic crystals can potentially have a photonic bandgap that can fully inhibit the spontaneous emission of on optical emitter. Fabrication criteria are derived for such a photonic crystal, based on the lattice parameter, filling fraction, and Si refractive index. In the opal photonic crystal composed of both Si and SiO2 we show that Er ions can be selectively excited in both the Si and SiO2 part of the photonic crystal by changing the excitation wavelength and/or the measurement temperature.
Abstract—In this article the details of Erbium doped Fiber Amplifier (EDFA) in presence of Silicon nanocrystal (Si-Nc) is investigated. In this analysis Si-Nc and Er ions in matrix of fiber are assumed two and five levels respectively. For this structure rate equation for transient and steady state analysis is considered. The range of Er (+3) concentration and pump intensity at 488 nm are considered [10 17 − 10 21]1/cm 3 and [10 17 − 10 23] photon/cm 2 · sec respectively in this paper. Based on numerical simulation of this problem we observed that with increasing of concentration of the Si-Nc the fiber length for given optical gain is decreased. For example in the case of 40 dB optical gain, we calculated fiber length to be 1.1 × 10 5 cm without Si-Nc and 5 × 10 2 cm for σCCa = 1 × 10 −17 cm 2 (confined carrier absorption cross-section) and 5 cm for σCCa =1 × 10 −19 cm 2 respectively. Our simulations show that for second level with increasing pump intensity the population rise and fall times are decreased. But, for third level the population rise time is decreased and fall time is depends to level of Er ion interactions. We observed that with increasing Er ions optical net gain is increased and finally has a maximum. After this special value of Er ions because of increasing in interaction between ions the net gain finally begin to decrease. In this analysis we let to Er ions have inhomogeneous distribution. Also, we observed that in this case with increasing of the distribution peak, the net gain is increased, interaction between ions is increased, the coupling coefficient to the Si-Ncs is increased and losses due to Si-Ncs are decreased. Finally effect of Kexiton (maximum number of exciton in single Si-Nc) on amplification process is considered and we observed that in the case of Kexiton = 2 the optical gain considerably and introduced losses due to Si-Nc are increased. 28 Rostami and SalmanOgli 1.
In recent years, silicon photonics has achieved great success in optical communication area. More and more on-chip optoelectronic devices have been realized and commercialized on silicon photonics platform, such as silicon-based modulators, filters and detectors. However, on-chip light sources are still not achieved because that silicon is an indirect bandgap material. To solve this problem, the rare earth element erbium (Er) is considered, which emits light covering 1.5 μm to 1.6 μm and has been widely used in fiber amplifiers. Compared to Er-doped fiber amplifiers (EDFA), the Er ion concentration needs to be more than two orders higher for on-chip Er-based light sources due to the compact size integration requirements. Therefore, the choice of the host material is crucially important. In this paper, we review the recent progress in on-chip Er-based light sources and the advantages and disadvantages of different host materials are compared and analyzed. Finally, the existing challenges and development directions of the on-chip Er-based light sources are discussed.
We aim to amplify a signal in a strip loaded waveguide composed by an active silica layer co-doped with silicon nanograins and rare-earth ions deposited on a silica cladding layer and topped by a silica strip. The signal wavelength corresponds to the transition wavelength between two energy levels of a rare earth ions. To achieve an efficient population inversion, the rare earth ions benefit from the indirect excitation via silicon nanograins which show an absorption cross section fourfold higher than the one of rare earth ions. In order to study the influence of the type of rare earth on the optical gain, we consider two rare earth ions : neodymium ions (Nd3+) for a signal wavelength at 1060 nm and erbium ions (Er3+) for a signal wavelength at 1540 nm. The optical gain is simulated using a modified two loops auxiliary-differential equation and finite-difference time-domain (ADE-FDTD) algorithm. Within this new scheme we can compute the steady state levels populations as well as the spatial distribution of the guided field in the waveguide whatever the populations levels lifetime considered. We also calculate the gross gain as well as the net gain by taking into account the experimental background losses. We demonstrate that a significant positive net gain can only be achieved with the Nd3+ doped waveguide up to 30 dB/cm for a pump power density of 10^4 mW/mm².