Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Architecture générique de décodeur de codes LDPC

Frédéric Guilloud

Published Jan 1, 2004• 5 citations
OpenAlex

Abstract

The Low-Density Parity-Check codes are among the most powerful forward error correcting codes, since they enable to get as close as a fraction of a dB from the Shannon limit.This astonishing performance combined with their relatively simple decoding algorithmmake these codes very attractive for the next digital transmission system generations. Itis already the case for the next digital satellite broadcasting standard (DVB-S2), where an irregular LDPC code has been chosen to protect the downlink information. In this thesis, we focused our research on the iterative decoding algorithms and their hardware implementations. We proposed first a suboptimal algorithm named the λ-min algorithm. It reduces significantly the complexity of the decoder without any significant performance loss, as compared to the belief propagation (BP) algorithm. Then we studied and designed a generic architecture of an LDPC decoder, which has been implemented on a FPGA based platform. This hardware decoder enables to accelerate the simulations more than 500 times as compared to software simulations. Moreover, based on an all-tunable design, our decoder features many facilities: It is possible to configure it for a very wide code family, so that the research for good codes is processed faster ; thanks to the genericity of the processing components, it is also possible to optimize the internal coding format, and even to compare various decoding algorithms and various processing schedules. Finally, our experience in the area of LDPC decoders led us to propose a formal framework for analysing the architectures of LDPC decoders. This framework encompasses both the datapath (parallelism, node processors architectures) and the control mode associated to the several decoding schedules. Thus within this framework, a classification of the different state-of-the-art LDPC decoders is proposed. Moreover, some synthesis of efficient and unpublished architectures have been also proposed.

Related papers

Generic Architecture for LDPC Codes Decoding

Frédéric Guilloud

The Low-Density Parity-Check codes are among the most powerful forward error correcting codes, since they enable to get as close as a fraction of a dB from the Shannon limit.This astonishing performance combined with their relatively simple decoding algorithmmake these codes very attractive for the next digital transmission system generations. Itis already the case for the next digital satellite broadcasting standard (DVB-S2), where an irregular LDPC code has been chosen to protect the downlink information. In this thesis, we focused our research on the iterative decoding algorithms and their hardware implementations. We proposed first a suboptimal algorithm named the λ-min algorithm. It reduces significantly the complexity of the decoder without any significant performance loss, as compared to the belief propagation (BP) algorithm. Then we studied and designed a generic architecture of an LDPC decoder, which has been implemented on a FPGA based platform. This hardware decoder enables to accelerate the simulations more than 500 times as compared to software simulations. Moreover, based on an all-tunable design, our decoder features many facilities: It is possible to configure it for a very wide code family, so that the research for good codes is processed faster ; thanks to the genericity of the processing components, it is also possible to optimize the internal coding format, and even to compare various decoding algorithms and various processing schedules. Finally, our experience in the area of LDPC decoders led us to propose a formal framework for analysing the architectures of LDPC decoders. This framework encompassesboth the datapath (parallelism, node processors architectures) and the control mode associated to the several decoding schedules. Thus within this framework, a classification of the different state-of-the-art LDPC decoders is proposed. Moreover, some synthesis of efficient and unpublished architectures have been also proposed.

•Jan 1, 2004•30 citations

Resource efficient flexible architectures for low-density parity-check decoders

Vikram Arkalgud Chandrasetty

Digital communication has become part of most applications we use today.It could be for internet access using WLAN/WiMAX technology or satellite based Digital Video Broadcasting (DVB) or even mobile applications.It may be possible to achieve very high communication bandwidth for these applications.But the problem is with the reliability of information received over the communication channel that is often subjected to noise.The obvious solution to this problem is incorporating error correction techniques in the communication system to correct the errors introduced during transit.One of the best performing error correction codes are Low-Density Parity-Check (LDPC) codes discovered by Gallager in 1962, but these codes only gained popularity over the last decade or so.LDPC codes can achieve excellent bit error rate (BER) performance and are very suitable for next-generation communication systems.Studies have shown that large LDPC codes can achieve BER performance very close to the Shannon Limit.Hence these codes are of paramount interest among the research community.However, practical implementation of high performance LDPC decoders with large code lengths is a challenge faced by designers today due to the huge complexity and hardware resources required.This research aims to reduce the complexity of LDPC decoding algorithms and explore resource efficient architectures for hardware implementation.LDPC decoders are primarily based on iterative algorithms and typically consist of large number of computational nodes, with complex interconnections among the nodes.A fully-parallel implementation of LDPC decoder with large code length can provide high throughput, but is costly in terms of hardware resources required.Even today's high-end FPGAs

•Jan 1, 2012•0 citations

Design and implementation of decoders for error correction in high-speed communication systems.

Joan Marc Català Pérez

This thesis is focused on the design and implementation of binary low-density parity-check (LDPC) code decoders for high-speed modern communication systems. The basic of LDPC codes and the performance and bottlenecks, in terms of complexity and hardware efficiency, of the main soft-decision and hard-decision decoding algorithms (such as Min-Sum, Optimized 2-bit Min-Sum and Reliability-based iterative Majority-Logic) are analyzed. The complexity and performance of those algorithms are improved to allow efficient hardware architectures.\n\nA new decoding algorithm called One-Minimum Min-Sum is proposed. It reduces considerably the complexity of the check node update equations of the Min-Sum algorithm. The second minimum is estimated from the first minimum value by a means of a linear approximation that allows a dynamic adjustment. The Optimized 2-bit Min-Sum algorithm is modified to initialize it with the complete LLR values and to introduce the extrinsic information in the messages sent from the variable nodes. Its variable node equation is reformulated to reduce its complexity. Both algorithms were tested for the (2048,1723) RS-based LDPC code and (16129,15372) LDPC code using an FPGA-based hardware emulator. They exhibit BER performance very close to Min-Sum algorithm and do not introduce early error-floor. \n\nIn order to show the hardware advantages of the proposed algorithms, hardware decoders were implemented in a 90 nm CMOS process and FPGA devices based on two types of architectures: full-parallel and partial-parallel one with horizontal layered schedule. The results show that the decoders are more area-time efficient than other published decoders and that the low-complexity of the Modified Optimized 2-bit Min-Sum allows the implementation of 10 Gbps decoders in current FPGA devices. \n\nFinally, a new hard-decision decoding algorithm, the Historical-Extrinsic Reliability-Based Iterative Decoder, is presented. This algorithm introduces the new idea of considering hard-decision votes as soft-decision to compute the extrinsic information of previous iterations. It is suitable for high-rate codes and improves the BER performance of the previous RBI-MLGD algorithms, with similar complexity.

•Jul 7, 2017•0 citations

Fully programmable LDPC decoder hardware architectures

Christiane Beuschel

In recent years, the amount of digital data which is stored and transmitted for private and public usage has increased considerably. To allow a save transmission and storage of data despite of error-prone transmission media, error correcting codes are used. A large variety of codes has been developed, and in the past decade low-density parity-check (LDPC) codes which have an excellent error correction performance became more and more popular. Today, low-density parity-check codes have been adopted for several standards, and efficient decoder hardware architectures are known for the chosen structured codes. However, the existing decoder designs lack flexibility as only few structured codes can be decoded with one decoder chip. In consequence, different codes require a redesign of the decoder, and few solutions exist for decoding of codes which are not quasi-cyclic or which are unstructured. In this thesis, three different approaches are presented for the implementation of fully programmable LDPC decoders which can decode arbitrary LDPC codes. As a design study, the first programmable decoder which uses a heuristic mapping algorithm is realized on a field-programmable gate array (FPGA), and error correction curves are measured to verify the correct functionality. The main contribution of this thesis lies in the development of the second and the third architecture and an appropriate mapping algorithm. The proposed fully programmable decoder architectures use one-phase message passing and layered decoding and can decode arbitrary LDPC codes using an optimum mapping and scheduling algorithm. The presented programmable architectures are in fact generalized decoder architectures from which the known decoder architectures for structured LDPC codes can be derived.

•Jan 1, 2010•1 citation

A multistage scheduled decoder for short block length low-density parity-check codes

Nazanin Elhami-Khorasani

Recent advances in coding theory have uncovered the previously forgotten power of Low-Density Parity-Check (LDPC) codes. Their popularity can be related to their relatively simple iterative decoders and their potential to achieve high performance close to shannon limit. These make them an attractive candidate for error correcting application in communication systems. In this thesis, we focus our research on the iterative decoding algorithms for Low-Density Parity-Check codes and present an improved decoding algorithm. First, the graph structure of LDPC codes is studied and a graph-based search algorithm to find the shortest closed walk and shortest cycle for each node of the graph is proposed. Then, the Deterministic schedule is applied on nodes of the graph with the objective of preserving the optimality of the algorithms. Finally, Hybrid Switch-Type technique is applied on the improved algorithms to provide a desirable complexity/performance trade-off. Hybrid Technique and Deterministic schedule are combined for decoding regular and irregular LDPC codes. The performance and complexity of the decoder is studied for Sum-Product and Gallager A algorithms. The result is a flexible decoder for any available LDPC code and any combination of decoding algorithms based on the communication systems need. In this technique, we benefit the high performance of soft-decision algorithms and low complexity of hard-decision algorithms by changing the decoding rule after a few iterations. Hence, a desirable performance can be obtained with less average number of soft iterations. Moreover, all the nodes do not update messages in each iteration. As a result, the total number of computations is reduced considerably

•Jan 1, 2007•0 citations

Implementation of a Flexible LDPC Decoder

Guido Masera, Federico Quaglio, F. Vacca

Low-density parity-check codes (LDPC) are among the most powerful error correcting tools today available. For this reason they became very popular in several applications such as the digital satellite broadcasting system (DVB-S2), wireless local area network (IEEE 802.11n) and metropolitan area network (802.16e). Whereas several code-specific decoders have been proposed in the literature, the implementation of a high performance yet flexible LDPC decoder still is a challenging topic. This work presents a novel formulation of the decoding algorithm that strongly simplifies internal communication requirements and enables the development of decoders supporting generally defined LDPC codes. The resulting architecture is tailored to decode both IEEE 802.11n and IEEE 802.16e LDPC codes, as well as any other code of comparable complexity. The implementation cost deriving from the full flexibility offered by the proposed approach is also evaluated.

IEEE Transactions on Circuits and Systems II Analog and Digital Signal Processing•Jun 1, 2007•124 citations
The Low-Density Parity-Check codes are among the most powerful forward error correcting codes, since they enable to get as close as a fraction of a dB from the Shannon limit.This astonishing performance combined with their relatively simple decoding algorithmmake these codes very attractive for the next digital transmission system generations. Itis already the case for the next digital satellite broadcasting standard (DVB-S2), where an irregular LDPC code has been chosen to protect the downlink information. In this thesis, we focused our research on the iterative decoding algorithms and their hardware implementations. We proposed first a suboptimal algorithm named the λ-min algorithm. It reduces significantly the complexity of the decoder without any significant performance loss, as compared to the belief propagation (BP) algorithm. Then we studied and designed a generic architecture of an LDPC decoder, which has been implemented on a FPGA based platform. This hardware decoder enables to accelerate the simulations more than 500 times as compared to software simulations. Moreover, based on an all-tunable design, our decoder features many facilities: It is possible to configure it for a very wide code family, so that the research for good codes is processed faster ; thanks to the genericity of the processing components, it is also possible to optimize the internal coding format, and even to compare various decoding algorithms and various processing schedules. Finally, our experience in the area of LDPC decoders led us to propose a formal framework for analysing the architectures of LDPC decoders. This framework encompasses
both the datapath (parallelism, node processors architectures) and the control mode associated to the several decoding schedules. Thus within this framework, a classification of the different state-of-the-art LDPC decoders is proposed. Moreover, some synthesis of efficient and unpublished architectures have been also proposed.
The Low-Density Parity-Check codes are among the most powerful forward error correcting codes, since they enable to get as close as a fraction of a dB from the Shannon limit.This astonishing performance combined with their relatively simple decoding algorithmmake these codes very attractive for the next digital transmission system generations. Itis already the case for the next digital satellite broadcasting standard (DVB-S2), where an irregular LDPC code has been chosen to protect the downlink information. In this thesis, we focused our research on the iterative decoding algorithms and their hardware implementations. We proposed first a suboptimal algorithm named the λ-min algorithm. It reduces significantly the complexity of the decoder without any significant performance loss, as compared to the belief propagation (BP) algorithm. Then we studied and designed a generic architecture of an LDPC decoder, which has been implemented on a FPGA based platform. This hardware decoder enables to accelerate the simulations more than 500 times as compared to software simulations. Moreover, based on an all-tunable design, our decoder features many facilities: It is possible to configure it for a very wide code family, so that the research for good codes is processed faster ; thanks to the genericity of the processing components, it is also possible to optimize the internal coding format, and even to compare various decoding algorithms and various processing schedules. Finally, our experience in the area of LDPC decoders led us to propose a formal framework for analysing the architectures of LDPC decoders. This framework encompassesboth the datapath (parallelism, node processors architectures) and the control mode associated to the several decoding schedules. Thus within this framework, a classification of the different state-of-the-art LDPC decoders is proposed. Moreover, some synthesis of efficient and unpublished architectures have been also proposed.
Digital communication has become part of most applications we use today.It could be for internet access using WLAN/WiMAX technology or satellite based Digital Video Broadcasting (DVB) or even mobile applications.It may be possible to achieve very high communication bandwidth for these applications.But the problem is with the reliability of information received over the communication channel that is often subjected to noise.The obvious solution to this problem is incorporating error correction techniques in the communication system to correct the errors introduced during transit.One of the best performing error correction codes are Low-Density Parity-Check (LDPC) codes discovered by Gallager in 1962, but these codes only gained popularity over the last decade or so.LDPC codes can achieve excellent bit error rate (BER) performance and are very suitable for next-generation communication systems.Studies have shown that large LDPC codes can achieve BER performance very close to the Shannon Limit.Hence these codes are of paramount interest among the research community.However, practical implementation of high performance LDPC decoders with large code lengths is a challenge faced by designers today due to the huge complexity and hardware resources required.This research aims to reduce the complexity of LDPC decoding algorithms and explore resource efficient architectures for hardware implementation.LDPC decoders are primarily based on iterative algorithms and typically consist of large number of computational nodes, with complex interconnections among the nodes.A fully-parallel implementation of LDPC decoder with large code length can provide high throughput, but is costly in terms of hardware resources required.Even today's high-end FPGAs
This thesis is focused on the design and implementation of binary low-density parity-check (LDPC) code decoders for high-speed modern communication systems. The basic of LDPC codes and the performance and bottlenecks, in terms of complexity and hardware efficiency, of the main soft-decision and hard-decision decoding algorithms (such as Min-Sum, Optimized 2-bit Min-Sum and Reliability-based iterative Majority-Logic) are analyzed. The complexity and performance of those algorithms are improved to allow efficient hardware architectures.\n\nA new decoding algorithm called One-Minimum Min-Sum is proposed. It reduces considerably the complexity of the check node update equations of the Min-Sum algorithm. The second minimum is estimated from the first minimum value by a means of a linear approximation that allows a dynamic adjustment. The Optimized 2-bit Min-Sum algorithm is modified to initialize it with the complete LLR values and to introduce the extrinsic information in the messages sent from the variable nodes. Its variable node equation is reformulated to reduce its complexity. Both algorithms were tested for the (2048,1723) RS-based LDPC code and (16129,15372) LDPC code using an FPGA-based hardware emulator. They exhibit BER performance very close to Min-Sum algorithm and do not introduce early error-floor. \n\nIn order to show the hardware advantages of the proposed algorithms, hardware decoders were implemented in a 90 nm CMOS process and FPGA devices based on two types of architectures: full-parallel and partial-parallel one with horizontal layered schedule. The results show that the decoders are more area-time efficient than other published decoders and that the low-complexity of the Modified Optimized 2-bit Min-Sum allows the implementation of 10 Gbps decoders in current FPGA devices. \n\nFinally, a new hard-decision decoding algorithm, the Historical-Extrinsic Reliability-Based Iterative Decoder, is presented. This algorithm introduces the new idea of considering hard-decision votes as soft-decision to compute the extrinsic information of previous iterations. It is suitable for high-rate codes and improves the BER performance of the previous RBI-MLGD algorithms, with similar complexity.
In recent years, the amount of digital data which is stored and transmitted for private and public usage has increased considerably. To allow a save transmission and storage of data despite of error-prone transmission media, error correcting codes are used. A large variety of codes has been developed, and in the past decade low-density parity-check (LDPC) codes which have an excellent error correction performance became more and more popular. Today, low-density parity-check codes have been adopted for several standards, and efficient decoder hardware architectures are known for the chosen structured codes. However, the existing decoder designs lack flexibility as only few structured codes can be decoded with one decoder chip. In consequence, different codes require a redesign of the decoder, and few solutions exist for decoding of codes which are not quasi-cyclic or which are unstructured. In this thesis, three different approaches are presented for the implementation of fully programmable LDPC decoders which can decode arbitrary LDPC codes. As a design study, the first programmable decoder which uses a heuristic mapping algorithm is realized on a field-programmable gate array (FPGA), and error correction curves are measured to verify the correct functionality. The main contribution of this thesis lies in the development of the second and the third architecture and an appropriate mapping algorithm. The proposed fully programmable decoder architectures use one-phase message passing and layered decoding and can decode arbitrary LDPC codes using an optimum mapping and scheduling algorithm. The presented programmable architectures are in fact generalized decoder architectures from which the known decoder architectures for structured LDPC codes can be derived.
Recent advances in coding theory have uncovered the previously forgotten power of Low-Density Parity-Check (LDPC) codes. Their popularity can be related to their relatively simple iterative decoders and their potential to achieve high performance close to shannon limit. These make them an attractive candidate for error correcting application in communication systems. In this thesis, we focus our research on the iterative decoding algorithms for Low-Density Parity-Check codes and present an improved decoding algorithm. First, the graph structure of LDPC codes is studied and a graph-based search algorithm to find the shortest closed walk and shortest cycle for each node of the graph is proposed. Then, the Deterministic schedule is applied on nodes of the graph with the objective of preserving the optimality of the algorithms. Finally, Hybrid Switch-Type technique is applied on the improved algorithms to provide a desirable complexity/performance trade-off. Hybrid Technique and Deterministic schedule are combined for decoding regular and irregular LDPC codes. The performance and complexity of the decoder is studied for Sum-Product and Gallager A algorithms. The result is a flexible decoder for any available LDPC code and any combination of decoding algorithms based on the communication systems need. In this technique, we benefit the high performance of soft-decision algorithms and low complexity of hard-decision algorithms by changing the decoding rule after a few iterations. Hence, a desirable performance can be obtained with less average number of soft iterations. Moreover, all the nodes do not update messages in each iteration. As a result, the total number of computations is reduced considerably
Low-density parity-check codes (LDPC) are among the most powerful error correcting tools today available. For this reason they became very popular in several applications such as the digital satellite broadcasting system (DVB-S2), wireless local area network (IEEE 802.11n) and metropolitan area network (802.16e). Whereas several code-specific decoders have been proposed in the literature, the implementation of a high performance yet flexible LDPC decoder still is a challenging topic. This work presents a novel formulation of the decoding algorithm that strongly simplifies internal communication requirements and enables the development of decoders supporting generally defined LDPC codes. The resulting architecture is tailored to decode both IEEE 802.11n and IEEE 802.16e LDPC codes, as well as any other code of comparable complexity. The implementation cost deriving from the full flexibility offered by the proposed approach is also evaluated.