Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Wiley eBooks

High Frequency Properties and Applications of the Josephson Effect

Antonio Alci Barone, Gianfranco Paternò

Published Jul 14, 1982• 0 citations
Publisher

Abstract

This chapter contains sections titled: Simple voltage source model Microwave induced steps Effect of fluctuations on the induced voltage steps Tunneling junctions in external microwave radiation The “Riedel” peak Finite dimension effects Current source model Emission of radiation Detection of radiation Wide band detectors Narrow band detectors Parametric amplification Parametric amplifiers with externally pumped Josephson elements Internally pumped parametric amplifiers The determination of 2e/h and the voltage standard

DOI
10.1002/352760278x.ch11

Related papers

Physics of High-T, Josephson Junctions and SQUIDs

H. C. Yang, Jiazhen Lu, J. D. Lee +3 more

Effects of magnetic fields and microwave radiation on I-V characteristics of YBa2Cu3Oy high-T, Josephson junctions, SQUIDS and Josephson arrays were reported in this experiment, with special emphasis focused on the effects of microwave radiation. In addition to the ordinary constant-voltage steps resulting from the ac Josephson effect, noninteger constant voltage steps are occasionally observed under microwave radiation. We attribute these noninteger constant-voltage steps to the flux coupled to junctions or SQUIDS. Resistive SQUIDS disclose V-Φmodulation without a biased current. The peak to peak value AV of a V-Φ curve is enhanced by microwave radiation.

Chinese Journal of Physics•Apr 1, 1996•0 citations

Modeling of Josephson Traveling Wave Parametric Amplifiers

Claudio Guarcello, Guerino Avallone, C. Barone +39 more

The recent developments in quantum technologies, as well as advanced detection experiments, have raised the need to detect extremely weak signals in the microwave frequency spectrum. To this aim, the Josephson travelling wave parametric amplifier, a device capable of reaching the quantum noise limit while providing a wide bandwidth, has been proposed as a suitable cryogenic front-end amplifier. This work deals with the numerical study of a Josephson travelling wave parametric amplifier, without approximations regarding the nonlinearity of the key elements. In particular, we focus on the investigation of the system of coupled nonlinear differential equations representing all the cells of the Josephson travelling wave parametric amplifier, with proper input and output signals at the boundaries. The investigation of the output signals generated by the parametric amplification process explores the phase-space and the Fourier spectral analysis of the output voltage, as a function of the parameters describing the pump and signal tones that excite the device. Beside the expected behavior, i.e., the signal amplification, we show that, depending on the system operation, unwanted effects (such as pump tone harmonics, incommensurate frequency generation, and noise rise), which are not accounted for in simple linearized approaches, can be generated in the whole nonlinear system.

IEEE Transactions on Applied Superconductivity•Oct 14, 2022•18 citations

Arrays of Josephson tunnel junctions as parametric amplifiers

S. Wahlsten, S. Rudner, T. Claeson

Arrays of 10 or 40 series-connected small densely packed Josephson tunnel junctions were successfully operated as parametric amplifiers at 10 GHz. Between 50 and 90% of the junctions in an array were observed to work coherently in the amplification process. Signal gain exceeding 24 dB was achieved with a pump power as low as −50 to −70 dBm. A power width (i.e., the range of the pump power for a gain within 3 dB of the peak gain) of 0.25 dB and a bandwidth of 15 MHz were measured for 20-dB gain. The power width was in accordance with theory but the bandwidth was reduced, probably due to noise saturation effects. The latter effects can be reduced by lowering the input noise temperature or by including an external band limitation. The noise temperature was also increased by saturation; however, with an external bandwidth of 60 MHz, a noise temperature of 30±20 K was measured. The application of a magnetic field has proved extremely useful as a means of tuning the amplifiers to stable high-gain operating points. This tuning was also utilized in evaluating the amplifier parameters, and the theory by Feldman, Parrish, and Chiao has been verified. The upper frequency limit for a lead tunnel junction amplifier ought to be well above 300 GHz.

Journal of Applied Physics•Jul 1, 1978•61 citations

Shunted Josephson tunnel junctions: High-frequency, self-pumped low noise amplifiers

Nils P. Calander, T. Claeson, S. Rudner

The high-frequency amplification properties of transformer coupled, resistively shunted Josephson tunnel junctions have been investigated. The importance of the shunt loop inductance is stressed. It allows a high cutoff frequency, of significance for good high-frequency performance. The self-pumped parametric amplifier showed none of the excessive noise rise, which has hitherto plagued the development of externally pumped Josephson junction amplifiers. Around 10 GHz, we estimated a noise temperature less than 30 K for an amplifier pumped by a Josephson oscillation with a frequency well above twice the signal frequency. The corresponding gain of 5 dB may be increased in a better impedance matched circuit. The gain was very stable against variations in the bias conditions. A gain-bandwidth product as high as 0.3 was registered. The experimental results agreed well with the established theory for self-pumped parametric Josephson amplifiers. It should be possible to extend the low noise amplification by this device to mm wave frequencies. A relaxation oscillation occurred at a subharmonic of the Josephson frequency when the shunt loop inductance became large. The amplification in this mode followed closely the predictions of a simple model, where the signal modulated the switching of the sawtooth-like (relatively low frequency) relaxation current. Gains of about 15 dB were measured around 10 GHz, but the amplification was sensitive to bias conditions and noisy in this case where the relaxation frequency fell well below the signal frequency. Much improved properties were registered when the inductance was decreased so that the relaxation frequency approached the Josephson frequency and exceeded twice the signal frequency. The behavior then resembled that of a Josephson mode parametric amplifier, but the high content of harmonics of a relaxation oscillation meant that the amplifier became noisier due to converted noise from the many idler frequencies.

Journal of Applied Physics•Jul 1, 1982•26 citations

Josephsonovy jevy a jejich aplikace

Z. (Zdeněk) Janů

Chapter deals with Josephson effects, Feynman's derivation of DC and AC Josephson effects, Josephson effects in superfluid helium, calibration invariance, influence of DC magnetic field, temperature dependence of critical current, phase difference electrodynamics in the junction, RCSJ model, voltage-current characteristics, microwave irradiated junction, macroscopic quantum interference, technology, DC voltage standard, sub mm radiation receivers, microwave generators, SQUIDS and its applications.

•Jan 1, 2011•0 citations

Negative resistance effects with Josephson junctions

Helmut Kanter

Conventional negative resistance effects can be generated with a Josephson junction quite similar to that obtained with Varactor diodes, with the additional advantage that the internal, self-generated oscillations serve as a pump, i. e., only a dc source is needed instead of a high frequency pump source. However, another negative resistance effect typical for a Josephson junction is possible as has been predicted recently for the current controlled, highly damped junction model. The effect has recently been demonstrated experimentally at 9 GHz. Characteristically, the pump (Josephson) frequency is smaller than the frequency of the amplified signal and the pump mechanism is effective over a broad range of frequencies in contrast to the conventional parametric negative resistance effect where the pump frequency exceeds that of the signal and idler and where the frequency of operation is limited to a narrow range. The broad-band feature renders the amplifier operation uncritical to tuning and bias voltage fluctuations. The fact that the junction is the element of lowest impedance in the circuit alleviates to a degree the matching problem generally encountered with Josephson contacts. An assessment of the competitiveness of this effect in microwave technology is given.

Revue de Physique Appliquée•Jan 1, 1974•0 citations
This chapter contains sections titled: Simple voltage source model Microwave induced steps Effect of fluctuations on the induced voltage steps Tunneling junctions in external microwave radiation The “Riedel” peak Finite dimension effects Current source model Emission of radiation Detection of radiation Wide band detectors Narrow band detectors Parametric amplification Parametric amplifiers with externally pumped Josephson elements Internally pumped parametric amplifiers The determination of 2e/h and the voltage standard
Effects of magnetic fields and microwave radiation on I-V characteristics of YBa2Cu3Oy high-T, Josephson junctions, SQUIDS and Josephson arrays were reported in this experiment, with special emphasis focused on the effects of microwave radiation. In addition to the ordinary constant-voltage steps resulting from the ac Josephson effect, noninteger constant voltage steps are occasionally observed under microwave radiation. We attribute these noninteger constant-voltage steps to the flux coupled to junctions or SQUIDS. Resistive SQUIDS disclose V-Φmodulation without a biased current. The peak to peak value AV of a V-Φ curve is enhanced by microwave radiation.
The recent developments in quantum technologies, as well as advanced detection experiments, have raised the need to detect extremely weak signals in the microwave frequency spectrum. To this aim, the Josephson travelling wave parametric amplifier, a device capable of reaching the quantum noise limit while providing a wide bandwidth, has been proposed as a suitable cryogenic front-end amplifier. This work deals with the numerical study of a Josephson travelling wave parametric amplifier, without approximations regarding the nonlinearity of the key elements. In particular, we focus on the investigation of the system of coupled nonlinear differential equations representing all the cells of the Josephson travelling wave parametric amplifier, with proper input and output signals at the boundaries. The investigation of the output signals generated by the parametric amplification process explores the phase-space and the Fourier spectral analysis of the output voltage, as a function of the parameters describing the pump and signal tones that excite the device. Beside the expected behavior, i.e., the signal amplification, we show that, depending on the system operation, unwanted effects (such as pump tone harmonics, incommensurate frequency generation, and noise rise), which are not accounted for in simple linearized approaches, can be generated in the whole nonlinear system.
Arrays of 10 or 40 series-connected small densely packed Josephson tunnel junctions were successfully operated as parametric amplifiers at 10 GHz. Between 50 and 90% of the junctions in an array were observed to work coherently in the amplification process. Signal gain exceeding 24 dB was achieved with a pump power as low as −50 to −70 dBm. A power width (i.e., the range of the pump power for a gain within 3 dB of the peak gain) of 0.25 dB and a bandwidth of 15 MHz were measured for 20-dB gain. The power width was in accordance with theory but the bandwidth was reduced, probably due to noise saturation effects. The latter effects can be reduced by lowering the input noise temperature or by including an external band limitation. The noise temperature was also increased by saturation; however, with an external bandwidth of 60 MHz, a noise temperature of 30±20 K was measured. The application of a magnetic field has proved extremely useful as a means of tuning the amplifiers to stable high-gain operating points. This tuning was also utilized in evaluating the amplifier parameters, and the theory by Feldman, Parrish, and Chiao has been verified. The upper frequency limit for a lead tunnel junction amplifier ought to be well above 300 GHz.
The high-frequency amplification properties of transformer coupled, resistively shunted Josephson tunnel junctions have been investigated. The importance of the shunt loop inductance is stressed. It allows a high cutoff frequency, of significance for good high-frequency performance. The self-pumped parametric amplifier showed none of the excessive noise rise, which has hitherto plagued the development of externally pumped Josephson junction amplifiers. Around 10 GHz, we estimated a noise temperature less than 30 K for an amplifier pumped by a Josephson oscillation with a frequency well above twice the signal frequency. The corresponding gain of 5 dB may be increased in a better impedance matched circuit. The gain was very stable against variations in the bias conditions. A gain-bandwidth product as high as 0.3 was registered. The experimental results agreed well with the established theory for self-pumped parametric Josephson amplifiers. It should be possible to extend the low noise amplification by this device to mm wave frequencies. A relaxation oscillation occurred at a subharmonic of the Josephson frequency when the shunt loop inductance became large. The amplification in this mode followed closely the predictions of a simple model, where the signal modulated the switching of the sawtooth-like (relatively low frequency) relaxation current. Gains of about 15 dB were measured around 10 GHz, but the amplification was sensitive to bias conditions and noisy in this case where the relaxation frequency fell well below the signal frequency. Much improved properties were registered when the inductance was decreased so that the relaxation frequency approached the Josephson frequency and exceeded twice the signal frequency. The behavior then resembled that of a Josephson mode parametric amplifier, but the high content of harmonics of a relaxation oscillation meant that the amplifier became noisier due to converted noise from the many idler frequencies.
Chapter deals with Josephson effects, Feynman's derivation of DC and AC Josephson effects, Josephson effects in superfluid helium, calibration invariance, influence of DC magnetic field, temperature dependence of critical current, phase difference electrodynamics in the junction, RCSJ model, voltage-current characteristics, microwave irradiated junction, macroscopic quantum interference, technology, DC voltage standard, sub mm radiation receivers, microwave generators, SQUIDS and its applications.
Conventional negative resistance effects can be generated with a Josephson junction quite similar to that obtained with Varactor diodes, with the additional advantage that the internal, self-generated oscillations serve as a pump, i. e., only a dc source is needed instead of a high frequency pump source. However, another negative resistance effect typical for a Josephson junction is possible as has been predicted recently for the current controlled, highly damped junction model. The effect has recently been demonstrated experimentally at 9 GHz. Characteristically, the pump (Josephson) frequency is smaller than the frequency of the amplified signal and the pump mechanism is effective over a broad range of frequencies in contrast to the conventional parametric negative resistance effect where the pump frequency exceeds that of the signal and idler and where the frequency of operation is limited to a narrow range. The broad-band feature renders the amplifier operation uncritical to tuning and bias voltage fluctuations. The fact that the junction is the element of lowest impedance in the circuit alleviates to a degree the matching problem generally encountered with Josephson contacts. An assessment of the competitiveness of this effect in microwave technology is given.