Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Scheduling error correction operations for a quantum computer.

Andrew J. Landahl, Robert D. Carr, Cynthia A. Phillips, Anand Ganti

Published Sep 1, 2010• 0 citations
OpenAlex

Abstract

In a (future) quantum computer a single logical quantum bit (qubit) will be made of multiple physical qubits. These extra physical qubits implement mandatory extensive error checking. The efficiency of error correction will fundamentally influence the performance of a future quantum computer, both in latency/speed and in error threshold (the worst error tolerated for an individual gate). Executing this quantum error correction requires scheduling the individual operations subject to architectural constraints. Since our last talk on this subject, a team of researchers at Sandia National Labortories has designed a logical qubit architecture that considers all relevant architectural issues including layout, the effects of supporting classical electronics, and the types of gates that the underlying physical qubit implementation supports most naturally. This is a two-dimensional system where 2-qubit operations occur locally, so there is no need to calculate more complex qubit/information transportation. Using integer programming, we found a schedule of qubit operations that obeys the hardware constraints, implements the local-check code in the native gate set, and minimizes qubit idle periods. Even with an optimal schedule, however, parallel Monte Carlo simulation shows that there is no finite error probability for the native gates such that the error-correction system would be benecial.more » However, by adding dynamic decoupling, a series of timed pulses that can reverse some errors, we found that there may be a threshold. Thus finding optimal schedules for increasingly-refined scheduling problems has proven critical for the overall design of the logical qubit system. We describe the evolving scheduling problems and the ideas behind the integer programming-based solution methods. This talk assumes no prior knowledge of quantum computing.« less

Related papers

Lower overhead fault-tolerant building blocks for noisy quantum computers

Prithviraj Prabhu

Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit. We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.

quant-pharXiv:2605.12385•May 13, 2026•0 citations

Quantum error correction and fault tolerance

Pawan Kumar Verma, Mohit Kumar, Saurabh Singhal +1 more

Quantum computing has the capability to the solution of complex problems that classical systems are incapable of solving, but its practical application is crippled by the instability of quantum states. Trying to do quantum computations with quantum bits (qubits) is prone to decoherence, operational errors, and environmental noise, which can quickly lower computational accuracy. In this chapter, we discuss these issues by studying the theoretical basis and experimental techniques of the quantum error correction and fault-tolerant quantum computing. The key issue that has been recognized is the faithful storage and interaction of quantum information regardless of the fallible hardware and flawed hardware control systems. The aim of this chapter is to get a clear exposition of the principles of leading error correction codes, their implementation strategies, and the fault tolerance criteria. It also talks about threshold theorems, resource overheads and architectural considerations required to make quantum computation scalable. Through theoretical constructs as well as the latest advances, this chapter culminates on the idea that though the fault tolerance is still a resource intensive process in nature, it is theoretically plausible only within a certain limit of error margin. The most notable point is that the progress of quantum error correction and fault-tolerant quantum computing is used to design future quantum architectures that can transform the barriers of experiments to the needs of large-scale and reliable quantum computing.

CRC Press eBooks•Nov 6, 2026•0 citations

Tailoring quantum architectures to implementation style: a quantum computer for mobile and persistent qubits

Eric C. Chi, S. A. Lyon, Margaret Martonosi

In recent years, quantum computing (QC) research has moved from the realm of theoretical physics and mathematics into real implementations. With many different potential hardware implementations, quantum computer architecture is a rich field with an opportunity to solve interesting new problems and to revisit old ones. This paper presents a QC architecture tailored to physical implementations with highly mobile and persistent quantum bits (qubits). Implementations with qubit coherency times that are much longer than operation times and qubit transportation times that are orders of magnitude faster than operation times lend greater flexibility to the architecture. This is particularly true in the placement and locality of individual qubits. For concreteness, we assume a physical device model based on electron-spin qubits on liquid helium (eSHe). Like many conventional computer architectures, QCs focus on the efficient exposure of parallelism.We present here a QC microarchitecture that enjoys increasing computational parallelism with size and latency scaling only linearly with the number of operations. Although an efficient and high level of parallelism is admirable, quantum hardware is still expensive and difficult to build, so we demonstrate how the software may be optimized to reduce an application's hardware requirements by 25% with no performance loss. Because the majority of a QC's time and resources are devoted to quantum error correction, we also present noise modeling results that evaluate error correction procedures. These results demonstrate that idle qubits in memory need only be refreshedapproximately once every one hundred operation cycles.

ACM SIGARCH Computer Architecture News•Jun 9, 2007•2 citations

Error-Transparent Quantum Gates for Small Logical Qubit Architectures

Eliot Kapit

One of the largest obstacles to building a quantum computer is gate error, where the physical evolution of the state of a qubit or group of qubits during a gate operation does not match the intended unitary transformation. Gate error stems from a combination of control errors and random single qubit errors from interaction with the environment. While great strides have been made in mitigating control errors, intrinsic qubit error remains a serious problem that limits gate fidelity in modern qubit architectures. Simultaneously, recent developments of small error-corrected logical qubit devices promise significant increases in logical state lifetime, but translating those improvements into increases in gate fidelity is a complex challenge. In this Letter, we construct protocols for gates on and between small logical qubit devices which inherit the parent device's tolerance to single qubit errors which occur at any time before or during the gate. We consider two such devices, a passive implementation of the three-qubit bit flip code, and the author's own [E. Kapit, Phys. Rev. Lett. 116, 150501 (2016)PRLTAO0031-900710.1103/PhysRevLett.116.150501] very small logical qubit (VSLQ) design, and propose error-tolerant gate sets for both. The effective logical gate error rate in these models displays superlinear error reduction with linear increases in single qubit lifetime, proving that passive error correction is capable of increasing gate fidelity. Using a standard phenomenological noise model for superconducting qubits, we demonstrate a realistic, universal one- and two-qubit gate set for the VSLQ, with error rates an order of magnitude lower than those for same-duration operations on single qubits or pairs of qubits. These developments further suggest that incorporating small logical qubits into a measurement based code could substantially improve code performance.

arXiv:1703.09762•Physical Review Letters•Feb 1, 2018•39 citations

Designing scalable quantum computer architectures: layout and initialization

Frederic T. Chong, Dean Copsey

As the complexity of quantum computers increases, typical architectural issues such as communication, layout, and efficient design need to be addressed. This document addresses some basic architectural ideas for quantum computers. To be useful in reasonable calculations, quantum states will need constant error correction. This need guides how best to lay out physical components to minimize error-correction overhead. I propose a layout that minimizes communication overhead, and discuss the implementation of error-correction algorithms on that layout. I compare the cost overhead of purely local communication to communication by teleportation, and calculate the break-even point at which teleportation becomes efficient. Additionally, the overhead of error correction can be reduced by using a memory hierarchy to more efficiently store data not currently being computed on. The main requirement is the same as for a classical computer's cache: temporal locality. I show that an important quantum routine can be rearranged to take advantage of a small quantum memory cache, and compute the achieved savings. In a quantum system, complex operators are built up from the basic operators allowed by a given technology model. I show that the set of operators required to implement any complex operator in an error-corrected system can be approximated to arbitrary precision, given two elementary operators. I give results for all the operators in the set. Finally, I examine methods to initialize a quantum system. Quantum operators are reversible, so data cannot simply be written over. Instead, initialization entails compressing the entropy of a set of quantum bits into a small subset of those bits, leaving the rest of the bits in a known, non-random state. I examine three such compression algorithms. The best of these itself requires a pool of known states, and so cannot be used directly. The other two algorithms, however, produce less-than-optimal results. I explore why they produce suboptimal results, and propose that one of the suboptimal algorithms be used to compress the entropy of a subsystem, using the resulting known state to run the optimal algorithm.

•Jan 1, 2005•2 citations

X-Z Round Scheduling for the Surface Code with Defects under Biased Noise

Lakshika Rathi, Pau Escofet, Joshua Viszlai +1 more

Fault-tolerant Quantum Computing (FTQC) relies on Quantum Error Correction (QEC) codes that encode logical qubits across many physical qubits to detect and correct errors. The surface code is among the most widely studied codes due to its high error threshold, the existence of efficient decoders, and hardware-friendly properties: a planar, two-dimensional layout with nearest-neighbor connectivity. In practice, however, the fabrication of solid-state quantum processors introduces hardware defects, resulting in defective qubits and couplers that must be discarded. Adapting the surface code to these defects often requires measuring the $X$- and $Z$-type checks in separate rounds rather than simultaneously. In this work, we investigate the optimal $X$-to-$Z$ checks round-scheduling ratio under biased noise systems. Our results characterize how key architectural parameters, such as noise bias, code distance, and defect rate, impact the logical error rate. We provide insights into how to determine the optimal scheduling ratio directly from device calibration data, enabling manufacturers to maximize performance without extensive simulations. Our approach reduces the logical error rate by up to $4.25\times$ at a $1\%$ defect rate and up to $8.46\times$ at a $2\%$ defect rate for a distance-$13$ surface code under moderately biased noise. Furthermore, we demonstrate that the benefits of round-scheduling extend beyond the defective-hardware setting. In biased-noise architectures subject to CNOT crosstalk, separating $X$ and $Z$ measurement rounds yields up to $4.5\times$ reduction in logical error rate.

quant-pharXiv:2608.05518•Aug 7, 2026•1 citation
In a (future) quantum computer a single logical quantum bit (qubit) will be made of multiple physical qubits. These extra physical qubits implement mandatory extensive error checking. The efficiency of error correction will fundamentally influence the performance of a future quantum computer, both in latency/speed and in error threshold (the worst error tolerated for an individual gate). Executing this quantum error correction requires scheduling the individual operations subject to architectural constraints. Since our last talk on this subject, a team of researchers at Sandia National Labortories has designed a logical qubit architecture that considers all relevant architectural issues including layout, the effects of supporting classical electronics, and the types of gates that the underlying physical qubit implementation supports most naturally. This is a two-dimensional system where 2-qubit operations occur locally, so there is no need to calculate more complex qubit/information transportation. Using integer programming, we found a schedule of qubit operations that obeys the hardware constraints, implements the local-check code in the native gate set, and minimizes qubit idle periods. Even with an optimal schedule, however, parallel Monte Carlo simulation shows that there is no finite error probability for the native gates such that the error-correction system would be benecial.more » However, by adding dynamic decoupling, a series of timed pulses that can reverse some errors, we found that there may be a threshold. Thus finding optimal schedules for increasingly-refined scheduling problems has proven critical for the overall design of the logical qubit system. We describe the evolving scheduling problems and the ideas behind the integer programming-based solution methods. This talk assumes no prior knowledge of quantum computing.« less
Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit. We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.
Quantum computing has the capability to the solution of complex problems that classical systems are incapable of solving, but its practical application is crippled by the instability of quantum states. Trying to do quantum computations with quantum bits (qubits) is prone to decoherence, operational errors, and environmental noise, which can quickly lower computational accuracy. In this chapter, we discuss these issues by studying the theoretical basis and experimental techniques of the quantum error correction and fault-tolerant quantum computing. The key issue that has been recognized is the faithful storage and interaction of quantum information regardless of the fallible hardware and flawed hardware control systems. The aim of this chapter is to get a clear exposition of the principles of leading error correction codes, their implementation strategies, and the fault tolerance criteria. It also talks about threshold theorems, resource overheads and architectural considerations required to make quantum computation scalable. Through theoretical constructs as well as the latest advances, this chapter culminates on the idea that though the fault tolerance is still a resource intensive process in nature, it is theoretically plausible only within a certain limit of error margin. The most notable point is that the progress of quantum error correction and fault-tolerant quantum computing is used to design future quantum architectures that can transform the barriers of experiments to the needs of large-scale and reliable quantum computing.
In recent years, quantum computing (QC) research has moved from the realm of theoretical physics and mathematics into real implementations. With many different potential hardware implementations, quantum computer architecture is a rich field with an opportunity to solve interesting new problems and to revisit old ones. This paper presents a QC architecture tailored to physical implementations with highly mobile and persistent quantum bits (qubits). Implementations with qubit coherency times that are much longer than operation times and qubit transportation times that are orders of magnitude faster than operation times lend greater flexibility to the architecture. This is particularly true in the placement and locality of individual qubits. For concreteness, we assume a physical device model based on electron-spin qubits on liquid helium (eSHe). Like many conventional computer architectures, QCs focus on the efficient exposure of parallelism.We present here a QC microarchitecture that enjoys increasing computational parallelism with size and latency scaling only linearly with the number of operations. Although an efficient and high level of parallelism is admirable, quantum hardware is still expensive and difficult to build, so we demonstrate how the software may be optimized to reduce an application's hardware requirements by 25% with no performance loss. Because the majority of a QC's time and resources are devoted to quantum error correction, we also present noise modeling results that evaluate error correction procedures. These results demonstrate that idle qubits in memory need only be refreshedapproximately once every one hundred operation cycles.
One of the largest obstacles to building a quantum computer is gate error, where the physical evolution of the state of a qubit or group of qubits during a gate operation does not match the intended unitary transformation. Gate error stems from a combination of control errors and random single qubit errors from interaction with the environment. While great strides have been made in mitigating control errors, intrinsic qubit error remains a serious problem that limits gate fidelity in modern qubit architectures. Simultaneously, recent developments of small error-corrected logical qubit devices promise significant increases in logical state lifetime, but translating those improvements into increases in gate fidelity is a complex challenge. In this Letter, we construct protocols for gates on and between small logical qubit devices which inherit the parent device's tolerance to single qubit errors which occur at any time before or during the gate. We consider two such devices, a passive implementation of the three-qubit bit flip code, and the author's own [E. Kapit, Phys. Rev. Lett. 116, 150501 (2016)PRLTAO0031-900710.1103/PhysRevLett.116.150501] very small logical qubit (VSLQ) design, and propose error-tolerant gate sets for both. The effective logical gate error rate in these models displays superlinear error reduction with linear increases in single qubit lifetime, proving that passive error correction is capable of increasing gate fidelity. Using a standard phenomenological noise model for superconducting qubits, we demonstrate a realistic, universal one- and two-qubit gate set for the VSLQ, with error rates an order of magnitude lower than those for same-duration operations on single qubits or pairs of qubits. These developments further suggest that incorporating small logical qubits into a measurement based code could substantially improve code performance.
As the complexity of quantum computers increases, typical architectural issues such as communication, layout, and efficient design need to be addressed. This document addresses some basic architectural ideas for quantum computers. To be useful in reasonable calculations, quantum states will need constant error correction. This need guides how best to lay out physical components to minimize error-correction overhead. I propose a layout that minimizes communication overhead, and discuss the implementation of error-correction algorithms on that layout. I compare the cost overhead of purely local communication to communication by teleportation, and calculate the break-even point at which teleportation becomes efficient. Additionally, the overhead of error correction can be reduced by using a memory hierarchy to more efficiently store data not currently being computed on. The main requirement is the same as for a classical computer's cache: temporal locality. I show that an important quantum routine can be rearranged to take advantage of a small quantum memory cache, and compute the achieved savings. In a quantum system, complex operators are built up from the basic operators allowed by a given technology model. I show that the set of operators required to implement any complex operator in an error-corrected system can be approximated to arbitrary precision, given two elementary operators. I give results for all the operators in the set. Finally, I examine methods to initialize a quantum system. Quantum operators are reversible, so data cannot simply be written over. Instead, initialization entails compressing the entropy of a set of quantum bits into a small subset of those bits, leaving the rest of the bits in a known, non-random state. I examine three such compression algorithms. The best of these itself requires a pool of known states, and so cannot be used directly. The other two algorithms, however, produce less-than-optimal results. I explore why they produce suboptimal results, and propose that one of the suboptimal algorithms be used to compress the entropy of a subsystem, using the resulting known state to run the optimal algorithm.
Fault-tolerant Quantum Computing (FTQC) relies on Quantum Error Correction (QEC) codes that encode logical qubits across many physical qubits to detect and correct errors. The surface code is among the most widely studied codes due to its high error threshold, the existence of efficient decoders, and hardware-friendly properties: a planar, two-dimensional layout with nearest-neighbor connectivity. In practice, however, the fabrication of solid-state quantum processors introduces hardware defects, resulting in defective qubits and couplers that must be discarded. Adapting the surface code to these defects often requires measuring the XXX- and ZZZ-type checks in separate rounds rather than simultaneously. In this work, we investigate the optimal XXX-to-ZZZ checks round-scheduling ratio under biased noise systems. Our results characterize how key architectural parameters, such as noise bias, code distance, and defect rate, impact the logical error rate. We provide insights into how to determine the optimal scheduling ratio directly from device calibration data, enabling manufacturers to maximize performance without extensive simulations. Our approach reduces the logical error rate by up to 4.25×4.25\times4.25× at a 1%1\%1% defect rate and up to 8.46×8.46\times8.46× at a 2%2\%2% defect rate for a distance-131313 surface code under moderately biased noise. Furthermore, we demonstrate that the benefits of round-scheduling extend beyond the defective-hardware setting. In biased-noise architectures subject to CNOT crosstalk, separating XXX and ZZZ measurement rounds yields up to 4.5×4.5\times4.5× reduction in logical error rate.