Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

A superconducting flux QuBit : measurement, noise and control

Lin Tian

Published Jan 1, 2002• 1 citation
OpenAlex

Abstract

A superconducting quantum bit can be made with three nano-scale Josephson junctions connected in series. In this thesis, various aspects of this qubit are studied. It is shown numerically that the qubit behaves as a giant magnetic dipole with quantum tunneling between the two qubit states. The natural coupling between qubits plus the manipulation on a single qubit state provides the building blocks for universal quantum computing. The state of the qubit can be determined by measuring its flux with a SQUID. The measurement efficiency and measurement-induced decoherence are investigated. A coherent transition assisted scheme is designed for a projective measurement on the qubit. A general method is developed to study qubit decoherence by environmental noise. The dynamic control approach is applied for preventing off-resonant leakage during gate operations and for de-coupling the qubit from noise.

Related papers

Fast control and decoherence in superconducting quantum circuits

Chunqing Deng

This thesis discusses a series of experimental and theoretical studies on fast control and decoherence in superconducting quantum circuits. These two subjects are complementary aspects of the problem of improving the gate fidelities in quantum information processing devices based on superconducting circuits. \n \nIn the first part of this thesis, we present experiments on fast control of a superconducting flux qubit using strong driving. We explore driving with short pulses and a driving strength significantly exceeding the transition frequency. The observed dynamics is described in terms of quasienergies and quasienergy states, in agreement with Floquet theory. We observe the role of pulse shaping in the dynamics, as determined by non-adiabatic transitions between Floquet states. In addition, based on adiabatic perturbation theory in the Floquet picture, we propose a control scheme for fast and high-fidelity single-qubit operations with strong driving. These results pave the way to quantum control with a fidelity beyond the threshold of fault-tolerant quantum computation. \n \nIn the second part of this thesis, we discuss experimental methods and present the characterization of decoherence in superconducting resonators and superconducting qubits. Firstly, we present an analysis method on the measurements of photon loss in superconducting resonators. We use this method to characterize the microwave loss of aluminum oxide, an important material in superconducting circuits. The power and temperature dependence of the measured loss is consistent with loss due to two-level defects in amorphous materials. Secondly, we present experimental results on decoherence and noise spectroscopy of a superconducting flux qubit. Using the qubit as a noise spectrometer, we perform detailed measurements on the power spectral density of the flux noise in superconducting circuits over a wide range of frequencies, from 10^-3 to 10^8 Hz, and over a temperature range from 35 to 130 mK. We also present measurements of frequency and temperature dependence of the qubit energy relaxation.

•Aug 24, 2015•1 citation

Coherence properties of superconducting flux qubits

Samuele Spilla

The research work discussed in this thesis deals with the study of superconducting Josephson qubits. Superconducting qubits are solid-state artificial atoms which are based on lithographically defined Josephson tunnel junctions properties. When sufficiently cooled, these superconducting devices exhibit quantized states of charge, flux or junction phase depending on their design parameters. This allows to observe coherent evolutions of their states. The results presented can be divided into two parts. In a first part we investigate operations of superconducting qubits based on the quantum coherence in superconducting quantum interference devices (SQUID). We explain experimental data which has been observed in a SQUID subjected to fast, large-amplitude modifications of its effective potential shape. The motivations for this work come from the fact that in the past few years there have been attempts to interpret the supposed quantum behavior of physical systems, such as Josephson devices, within a classical framework. Moreover, we analyze the possibility of generating GHZ states, namely maximally entangled states, in a quantum system made out of three Josephson qubits. In particular, we investigate the possible limitations of the GHZ state generation due to coupling to bosonic baths. In the second part of the thesis we address a particular cause of decoherence of flux qubits which has been disregarded until now: thermal gradients, which can arise due to accidental non equilibrium quasiparticle distributions. The reason for these detrimental effects is that heat currents flowing through Josephson tunnel junctions in response to a temperature gradient are periodic functions of the phase difference between the electrodes. The phase dependence of the heat current comes from Andreev reflection, namely an interplay between the quasiparticles which carry heat and the superconducting condensate which is sensitive to the superconducting phase difference. Generally speaking, the flux qubit states are characterized by different values of the phase difference through their Josephson junctions. Consequently, the phase-dependent thermal current through a device subject a temperature gradient is related to the phase-dependent qubit states. We study how the thermal currents change according to the state of the qubits hence yielding a measurement of the qubit state. This in turn leads to an impact of temperature gradient on the dynamics of the system. We show that flux qubits in the Delft qubit design can have limitations of the decoherence time to the order of microseconds as a result of this newly discovered source of decoherence. In contrast, the fluxonium qubit is found to be well protected due to its superinductance.

•Feb 16, 2015•0 citations

Measurement of the Energy Relaxation Time in rf SQUID Flux Qubits

Wei Qiu

It is well known that that superconducting qubits based on Josephson junctions have the advantages of scalability and the qubit states are easy to prepare and control. In addition, demonstration of Rabi oscillations in various superconducting circuits shows that superconducting qubits are promising for scalable quantum information processing. However, despite flexibility of design and fabrication, easier to scale up, and fast gate speed, superconducting qubits usually have much shorter decoherence time than trapped ions, NMR etc. due to the relatively strong interactions between qubits and environment. Recent experiments show that low frequency flux noise is the dominant mechanism of decoherence in superconducting flux qubits. However, despite extensive effort the origin of flux noise is still not well understood. The goal of this work is to identify the source and characterize the property of flux noisein rf SQUID flux qubit through various spectroscopy and time-resolved measurements. Our result show that one can determine all circuit parameters needed for reconstructing qubit Hamiltonian with high accuracy via measurement of macroscopic resonant tunneling (MRT) and photon assisted tunneling (PAT) and that the amount of flux noise in rf SQUID qubits scales linearly with self inductance of the qubits. In addition, we have investigated the dynamics of a three-level flux qubit in incoherent regime. The result demonstrates that treating a multi-level physical qubit, such as the superconducting flux qubit, as an ideal two-level quantum system may be inadequate under certain circumstances.

•Dec 17, 2007•0 citations

Josephson-Junction Qubits

Yuriy Makhlin, Gerd Schön, Alexander Shnirman

Among the potential physical implementations of quantum bits (qubits) solid state devices appear most promising for large scale applications and integration in electronic circuits. Devices based on low-capacitance Josephson junctions exploit the coherence of the superconducting state, combined with the possibility to control individual charges by Coulomb blockade effects. The logical states in these systems differ by one Cooper-pair charge. Single- and two-bit operations can be performed by applying a sequence of gate voltages. The phase coherence time is sufficiently long to allow a series of these steps. If, in addition, the strength of the Josephson coupling is controlled (e.g. by currents in SQUID loops) the system is ideal for quantum computation. Recent experiments by Nakamura et al. show the feasibility of this approach. In addition to the manipulations of qubits the resulting quantum state has to be read out. This quantum measurement process can be accomplished by coupling a single-electron transistor (SET) capacitively to the qubit. We investigate the process by analyzing the time-evolution of the density matrix of the coupled system. The measurement process is characterized by three time scales: the dephasing time, which is fast when a dissipative current flows in the SET, a longer ‘measurement time’ needed to read out the signal, and a third, even longer ‘mixing time’, characterizing measurement induced transitions which destroy the information about the initial quantum state. The noise spectrum of the current in the SET displays these time scales and allows their direct observation.

Fortschritte der Physik•Sep 1, 2000•11 citations

Studies of Quantum Transitions of Magnetic Flux in a RF Squid Qubit

Luigi Longobardi

At low temperature and low damping, the magnetic flux of a rf Superconducting QUantum Interference Device (SQUID) acts as a macroscopic quantum variable whose dynamic is described by a double well potential. A rf SQUID consists of a superconducting loop interrupted by a thin insulating barrier, known as a Josephson junction. The modified rf SQUID design discussed in this thesis has independent, in situ, controls that allow varying the barrier height between the potential wells and their relative tilt. This high level of control of the potential together with the capability to implement an experimental setup optimized to reduce coupling to external sources of noise, made this system ideal not only for tests of quantum transition at a macroscopic level, but also as a scalable solid state device for quantum computation. A variety of measurements of quantum phenomena are reported in this thesis, including microwave level spectroscopy, coherent oscillations, and macroscopic resonant tunneling (MRT). These measurements are compared with theoretical models to study the possible sources of decoherence in a rf SQUID qubit. The analysis confirmed that the main source of decoherence is not due to coupling to the external environment, but it can be linked to intrinsic low frequency flux noise. Work from many groups over the last several years has shown that the performance of a superconductive qubit is limited by coupling to spurious defects in the materials used for the device fabrication. In this work we analyze the possibility of using the MRT as a tool for future studies of effects of materials and fabrication process in the realization of improved qubits, and we also explore the feasibility for measurements of quantum phenomena that involve fast pulsing of the potential barrier height.

•Oct 22, 2010•0 citations

Optimizing coherence and anharmonicity of superconducting qubit

Olli Mukkula

Quantum computers utilize qubits to store and process quantum information. In superconducting quantum computers, qubits are implemented as quantum superconducting resonant circuits. The circuits are operated only at the two energy states, which form the computational basis for the qubit. To suppress leakage to uncomputational states, superconducting qubits are designed to be anharmonic oscillators, which is achieved using one or more Josephson junctions, a nonlinear superconducting element. One of the main challenges in developing quantum computers is minimizing the decoherence caused by environmental noise. Decoherence is characterized by two coherence times, T1 for depolarization processes and T2 for dephasing. This thesis reviews and investigates the decoherence properties of superconducting qubits. The main goal of the thesis is to analyze the tradeoff between anharmonicity and dephasing in a qubit unimon. Recently developed unimon incorporates a single Josephson junction shunted by a linear inductor and a capacitor. Unimon is tunable by external magnetic flux, and at the half flux quantum bias, the Josephson energy is partially canceled by the inductive energy, allowing unimon to have relatively high anharmonicity while remaining fully protected against low-frequency charge noise. In addition, at the sweet spot with respect to the magnetic flux, unimon becomes immune to first-order perturbations in the flux. The sweet spot, however, is relatively narrow, making unimon susceptible to dephasing through the quadratic coupling to the flux noise. In the first chapter of this thesis, we present a comprehensive look into the basic theory of superconducting qubits, starting with two-state quantum systems, followed by superconductivity and superconducting circuit elements, and finally combining these two by introducing circuit quantum electrodynamics (cQED), a framework for building superconducting qubits. We follow with a theoretical discussion of decoherence in two-state quantum systems, described by the Bloch-Redfield formalism. We continue the discussion by estimating decoherence using perturbation theory, with special care put into the dephasing due to the low-frequency 1/f noise. Finally, we review the theoretical model of unimon, which is used in the numerical analysis. As a main result of this thesis, we suggest a design parameter regime for unimon, which gives the best ratio between anharmonicity and T2.

Työväentutkimus Vuosikirja•Jan 1, 2024•0 citations
A superconducting quantum bit can be made with three nano-scale Josephson junctions connected in series. In this thesis, various aspects of this qubit are studied. It is shown numerically that the qubit behaves as a giant magnetic dipole with quantum tunneling between the two qubit states. The natural coupling between qubits plus the manipulation on a single qubit state provides the building blocks for universal quantum computing. The state of the qubit can be determined by measuring its flux with a SQUID. The measurement efficiency and measurement-induced decoherence are investigated. A coherent transition assisted scheme is designed for a projective measurement on the qubit. A general method is developed to study qubit decoherence by environmental noise. The dynamic control approach is applied for preventing off-resonant leakage during gate operations and for de-coupling the qubit from noise.
This thesis discusses a series of experimental and theoretical studies on fast control and decoherence in superconducting quantum circuits. These two subjects are complementary aspects of the problem of improving the gate fidelities in quantum information processing devices based on superconducting circuits. \n \nIn the first part of this thesis, we present experiments on fast control of a superconducting flux qubit using strong driving. We explore driving with short pulses and a driving strength significantly exceeding the transition frequency. The observed dynamics is described in terms of quasienergies and quasienergy states, in agreement with Floquet theory. We observe the role of pulse shaping in the dynamics, as determined by non-adiabatic transitions between Floquet states. In addition, based on adiabatic perturbation theory in the Floquet picture, we propose a control scheme for fast and high-fidelity single-qubit operations with strong driving. These results pave the way to quantum control with a fidelity beyond the threshold of fault-tolerant quantum computation. \n \nIn the second part of this thesis, we discuss experimental methods and present the characterization of decoherence in superconducting resonators and superconducting qubits. Firstly, we present an analysis method on the measurements of photon loss in superconducting resonators. We use this method to characterize the microwave loss of aluminum oxide, an important material in superconducting circuits. The power and temperature dependence of the measured loss is consistent with loss due to two-level defects in amorphous materials. Secondly, we present experimental results on decoherence and noise spectroscopy of a superconducting flux qubit. Using the qubit as a noise spectrometer, we perform detailed measurements on the power spectral density of the flux noise in superconducting circuits over a wide range of frequencies, from 10^-3 to 10^8 Hz, and over a temperature range from 35 to 130 mK. We also present measurements of frequency and temperature dependence of the qubit energy relaxation.
The research work discussed in this thesis deals with the study of superconducting Josephson qubits. Superconducting qubits are solid-state artificial atoms which are based on lithographically defined Josephson tunnel junctions properties. When sufficiently cooled, these superconducting devices exhibit quantized states of charge, flux or junction phase depending on their design parameters. This allows to observe coherent evolutions of their states. The results presented can be divided into two parts. In a first part we investigate operations of superconducting qubits based on the quantum coherence in superconducting quantum interference devices (SQUID). We explain experimental data which has been observed in a SQUID subjected to fast, large-amplitude modifications of its effective potential shape. The motivations for this work come from the fact that in the past few years there have been attempts to interpret the supposed quantum behavior of physical systems, such as Josephson devices, within a classical framework. Moreover, we analyze the possibility of generating GHZ states, namely maximally entangled states, in a quantum system made out of three Josephson qubits. In particular, we investigate the possible limitations of the GHZ state generation due to coupling to bosonic baths. In the second part of the thesis we address a particular cause of decoherence of flux qubits which has been disregarded until now: thermal gradients, which can arise due to accidental non equilibrium quasiparticle distributions. The reason for these detrimental effects is that heat currents flowing through Josephson tunnel junctions in response to a temperature gradient are periodic functions of the phase difference between the electrodes. The phase dependence of the heat current comes from Andreev reflection, namely an interplay between the quasiparticles which carry heat and the superconducting condensate which is sensitive to the superconducting phase difference. Generally speaking, the flux qubit states are characterized by different values of the phase difference through their Josephson junctions. Consequently, the phase-dependent thermal current through a device subject a temperature gradient is related to the phase-dependent qubit states. We study how the thermal currents change according to the state of the qubits hence yielding a measurement of the qubit state. This in turn leads to an impact of temperature gradient on the dynamics of the system. We show that flux qubits in the Delft qubit design can have limitations of the decoherence time to the order of microseconds as a result of this newly discovered source of decoherence. In contrast, the fluxonium qubit is found to be well protected due to its superinductance.
It is well known that that superconducting qubits based on Josephson junctions have the advantages of scalability and the qubit states are easy to prepare and control. In addition, demonstration of Rabi oscillations in various superconducting circuits shows that superconducting qubits are promising for scalable quantum information processing. However, despite flexibility of design and fabrication, easier to scale up, and fast gate speed, superconducting qubits usually have much shorter decoherence time than trapped ions, NMR etc. due to the relatively strong interactions between qubits and environment. Recent experiments show that low frequency flux noise is the dominant mechanism of decoherence in superconducting flux qubits. However, despite extensive effort the origin of flux noise is still not well understood. The goal of this work is to identify the source and characterize the property of flux noisein rf SQUID flux qubit through various spectroscopy and time-resolved measurements. Our result show that one can determine all circuit parameters needed for reconstructing qubit Hamiltonian with high accuracy via measurement of macroscopic resonant tunneling (MRT) and photon assisted tunneling (PAT) and that the amount of flux noise in rf SQUID qubits scales linearly with self inductance of the qubits. In addition, we have investigated the dynamics of a three-level flux qubit in incoherent regime. The result demonstrates that treating a multi-level physical qubit, such as the superconducting flux qubit, as an ideal two-level quantum system may be inadequate under certain circumstances.
Among the potential physical implementations of quantum bits (qubits) solid state devices appear most promising for large scale applications and integration in electronic circuits. Devices based on low-capacitance Josephson junctions exploit the coherence of the superconducting state, combined with the possibility to control individual charges by Coulomb blockade effects. The logical states in these systems differ by one Cooper-pair charge. Single- and two-bit operations can be performed by applying a sequence of gate voltages. The phase coherence time is sufficiently long to allow a series of these steps. If, in addition, the strength of the Josephson coupling is controlled (e.g. by currents in SQUID loops) the system is ideal for quantum computation. Recent experiments by Nakamura et al. show the feasibility of this approach. In addition to the manipulations of qubits the resulting quantum state has to be read out. This quantum measurement process can be accomplished by coupling a single-electron transistor (SET) capacitively to the qubit. We investigate the process by analyzing the time-evolution of the density matrix of the coupled system. The measurement process is characterized by three time scales: the dephasing time, which is fast when a dissipative current flows in the SET, a longer ‘measurement time’ needed to read out the signal, and a third, even longer ‘mixing time’, characterizing measurement induced transitions which destroy the information about the initial quantum state. The noise spectrum of the current in the SET displays these time scales and allows their direct observation.
At low temperature and low damping, the magnetic flux of a rf Superconducting QUantum Interference Device (SQUID) acts as a macroscopic quantum variable whose dynamic is described by a double well potential. A rf SQUID consists of a superconducting loop interrupted by a thin insulating barrier, known as a Josephson junction. The modified rf SQUID design discussed in this thesis has independent, in situ, controls that allow varying the barrier height between the potential wells and their relative tilt. This high level of control of the potential together with the capability to implement an experimental setup optimized to reduce coupling to external sources of noise, made this system ideal not only for tests of quantum transition at a macroscopic level, but also as a scalable solid state device for quantum computation. A variety of measurements of quantum phenomena are reported in this thesis, including microwave level spectroscopy, coherent oscillations, and macroscopic resonant tunneling (MRT). These measurements are compared with theoretical models to study the possible sources of decoherence in a rf SQUID qubit. The analysis confirmed that the main source of decoherence is not due to coupling to the external environment, but it can be linked to intrinsic low frequency flux noise. Work from many groups over the last several years has shown that the performance of a superconductive qubit is limited by coupling to spurious defects in the materials used for the device fabrication. In this work we analyze the possibility of using the MRT as a tool for future studies of effects of materials and fabrication process in the realization of improved qubits, and we also explore the feasibility for measurements of quantum phenomena that involve fast pulsing of the potential barrier height.
Quantum computers utilize qubits to store and process quantum information. In superconducting quantum computers, qubits are implemented as quantum superconducting resonant circuits. The circuits are operated only at the two energy states, which form the computational basis for the qubit. To suppress leakage to uncomputational states, superconducting qubits are designed to be anharmonic oscillators, which is achieved using one or more Josephson junctions, a nonlinear superconducting element. One of the main challenges in developing quantum computers is minimizing the decoherence caused by environmental noise. Decoherence is characterized by two coherence times, T1 for depolarization processes and T2 for dephasing. This thesis reviews and investigates the decoherence properties of superconducting qubits. The main goal of the thesis is to analyze the tradeoff between anharmonicity and dephasing in a qubit unimon. Recently developed unimon incorporates a single Josephson junction shunted by a linear inductor and a capacitor. Unimon is tunable by external magnetic flux, and at the half flux quantum bias, the Josephson energy is partially canceled by the inductive energy, allowing unimon to have relatively high anharmonicity while remaining fully protected against low-frequency charge noise. In addition, at the sweet spot with respect to the magnetic flux, unimon becomes immune to first-order perturbations in the flux. The sweet spot, however, is relatively narrow, making unimon susceptible to dephasing through the quadratic coupling to the flux noise. In the first chapter of this thesis, we present a comprehensive look into the basic theory of superconducting qubits, starting with two-state quantum systems, followed by superconductivity and superconducting circuit elements, and finally combining these two by introducing circuit quantum electrodynamics (cQED), a framework for building superconducting qubits. We follow with a theoretical discussion of decoherence in two-state quantum systems, described by the Bloch-Redfield formalism. We continue the discussion by estimating decoherence using perturbation theory, with special care put into the dephasing due to the low-frequency 1/f noise. Finally, we review the theoretical model of unimon, which is used in the numerical analysis. As a main result of this thesis, we suggest a design parameter regime for unimon, which gives the best ratio between anharmonicity and T2.