Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics B

Fabrication of Al/AlOx/Al Josephson junctions and superconducting quantum circuits by shadow evaporation and a dynamic oxidation process

Yulin Wu, Hui Deng, Haifeng Yu, Guangming Xue, Ye Tian, Jie Li, Yingfei Chen, Shi-Ping Zhao, Dongning Zheng

Published Jun 1, 2013• 19 citations
Publisher

Abstract

Besides serving as promising candidates for realizing quantum computing, superconducting quantum circuits are one of a few macroscopic physical systems in which fundamental quantum phenomena can be directly demonstrated and tested, giving rise to a vast field of intensive research work both theoretically and experimentally. In this paper we report our work on the fabrication of superconducting quantum circuits, starting from its building blocks: Al/AlO x /Al Josephson junctions. By using electron beam lithography patterning and shadow evaporation, we have fabricated aluminum Josephson junctions with a controllable critical current density ( j c ) and wide range of junction sizes from 0.01 μm 2 up to 1 μm 2 . We have carried out systematical studies on the oxidation process in fabricating Al/AlO x /Al Josephson junctions suitable for superconducting flux qubits. Furthermore, we have also fabricated superconducting quantum circuits such as superconducting flux qubits and charge-flux qubits.

DOI
10.1088/1674-1056/22/6/060309

Related papers

Optimization of shadow evaporation and oxidation for reproducible quantum Josephson junction circuits

Dmitry O. Moskalev, E. V. Zikiy, Anastasiya A. Pishchimova +5 more

Abstract The most commonly used physical realization of superconducting qubits for quantum circuits is a transmon. There are a number of superconducting quantum circuits applications, where Josephson junction critical current reproducibility over a chip is crucial. Here, we report on a robust chip scale Al/AlO x /Al junctions fabrication method due to comprehensive study of shadow evaporation and oxidation steps. We experimentally demonstrate the evidence of optimal Josephson junction electrodes thickness, deposition rate and deposition angle, which ensure minimal electrode surface and line edge roughness. The influence of oxidation method, pressure and time on critical current reproducibility is determined. With the proposed method we demonstrate Al/AlO x /Al junction fabrication with the critical current variation $$(\sigma /\langle {I_{c} } \rangle )$$ ( σ / ⟨ I c ⟩ ) less than 3.9% (from 150 × 200 to 150 × 600 nm 2 area) and 7.7% (for 100 × 100 nm 2 area) over 20 × 20 mm 2 chip. Finally, we fabricate separately three 5 × 10 mm 2 chips with 18 transmon qubits (near 4.3 GHz frequency) showing less than 1.9% frequency variation between qubits on different chips. The proposed approach and optimization criteria can be utilized for a robust wafer-scale superconducting qubit circuits fabrication.

arXiv:2212.06692•Scientific Reports•Mar 13, 2023•47 citations

Fabrication of superconducting flux quantum bits and the feature parameters of Al/AlOx/Al tunnel junctions

Lin Wang, Weiwei Xu, Peiheng Wu +3 more

As one of the candidates for realizing quantum bits, superconducting quantum bits, based on Josephson junction, have the advantages of easy integrating, coupling with the outside environment and so on. Double-layer photoresist was used to prepare suspended shadow mask by deep ultra-violet (DUV) lithography. We fabricated the sample of superconducting flux quantum bits by electron beam evaporation and static oxidization with aluminum as superconducting material. According to the dependence of the flatness on the thickness of aluminum film, we select 60 nm as the thickness of the bottom electrode of tunnel junction. By increasing the distance between the evaporation source and the substrate, we have improved the smoothness of film and thus reduced the leakage current of tunnel junction. The tri-layer structure of aluminum tunnel junction was observed by transmission electron microscopy (TEM), and the relationship between the thickness of barrier layer and the oxidation pressure was obtained.

Chinese Science Bulletin (Chinese Version)•Sep 1, 2014•0 citations

Fabrication of high-quality submicron Nb/Al-AlO x /Nb tunnel junctions

Haifeng Yu, Cao Wen-Hui, Zhu Xiao-Bo +6 more

Nb/Al–AlO x /Nb tunnel junctions are often used in the studies of macroscopic quantum phenomena and superconducting qubit applications of the Josephson devices. In this work, we describe a convenient and reliable process using electron beam lithography for the fabrication of high-quality, submicron-sized Nb/Al–AlO x /Nb Josephson junctions. The technique follows the well-known selective Nb etching process and produces high-quality junctions with V m = 100 mV at 2.3 K for the typical critical current density of 2.2 kA/cm 2 , which can be adjusted by controlling the oxygen pressure and oxidation time during the formation of the tunnelling barrier. We present the results of the temperature dependence of the sub-gap current and in-plane magnetic-field dependence of the critical current, and compare them with the theoretical predictions.

Chinese Physics B•Aug 1, 2008•7 citations

A simple method to fabricate Josephson junctions

Imran Mahboob, Satoshi Sasaki, Takaaki Takenaka

A minimal method to fabricate Al/AlO$_x$/Al Josephson junctions (JJs) using photolithography and argon etching, before metallization and oxidation, is demonstrated. JJs with areas ranging from 1 to 6 $μ$m$^2$ can be fabricated and, with the appropriate oxidation conditions, the junction resistance can be varied by $\sim$2 orders of magnitude. Transmission electron microscopy reveals the successful fabrication of JJs with few grain boundaries suggesting reduced energy loss from two-level-systems. Superconducting QUantum Interference Devices (SQUIDs) fabricated from this methodology exhibit reduced resistance variation over multiple chips, compared with electron beam lithography, and the devices can sustain repeated thermal cycles to 10 mK with the excellent flux response remaining unchanged. The quantum applications of this technology are demonstrated by embedding a SQUID resonator into a 3D cavity and parametrically amplifying low photon numbers with gains of $\sim$40 dB. This work establishes the simplest approach to fabricating JJs to date, and it could prove pivotal to the widespread utilization of superconducting circuit-based quantum technologies.

quant-pharXiv:2604.25195•Apr 29, 2026•1 citation

Character and fabrication of Al/Al2O3/Al tunnel junctions for qubit application

DanDan Shen, Ran Zhu, Weiwei Xu +5 more

The superconductive Josephson junction is the key device for superconducting quantum computation. We have fabricated Al/Al2O3/Al tunnel junctions using a double angle evaporation method based on a suspended shadow mask. The Al2O3 junction barrier has been formed by introducing pure oxygen into the chamber during the fabrication process. We have adjusted exposure conditions by changing either the oxygen pressure or the oxidizing time during the formation of tunnel barriers to control the critical current density J c and the junction specific resistance R c . Measurements of the leakage in Al/Al2O3/Al tunnel junctions show that the devices are suitable for qubit applications.

Chinese Science Bulletin•Jan 20, 2012•19 citations

Progettazione e sviluppo di un processo bridge-free per la realizzazione di giunzioni Josephson per applicazioni di quantum computing

GIOVANNI GENNARI

The present thesis focuses on the laboratory fabrication of Al/AlOₓ/Al Josephson junctions using a bridge-free shadow evaporation technique, developed within the broader context of superconducting technologies for quantum computing. The interest in such devices arises from the central role played by the Josephson junction in superconducting qubits: unlike a purely harmonic LC oscillator, characterized by equally spaced energy levels, the presence of the junction introduces a nonlinearity that leads to an anharmonic energy spectrum. This allows for the selective addressing of the fundamental transition, which is a necessary condition for implementing a circuit-based qubit. In this framework, the quality of the AlOₓ tunnel barrier and of the metal interfaces is of crucial importance, as it directly affects not only the static electrical parameters of the junction but also dielectric losses and, more generally, the performance of the device in quantum applications. Following a theoretical overview of superconducting qubits and the physics of Al/AlOₓ/Al Josephson junctions, the work focuses on the experimental implementation and optimization of a bridge-free fabrication approach, adopted as an alternative to conventional suspended-bridge techniques. This method preserves the advantages of in-situ shadow evaporation for barrier formation while replacing the mechanical fragility of the suspended bridge with a geometrical control of the resist undercut. The operating principle relies on engineering an asymmetric profile in a bilayer resist system such that, during the two angled evaporations, only one deposition reaches the substrate along the connection lines, while the other is deposited on the resist sidewalls and subsequently removed during lift-off. In the central region, the overlap of the two evaporated aluminum layers, separated by an intermediate oxidation step, defines the Al/AlOₓ/Al superconductor–insulator–superconductor structure. This approach results in a more robust masking scheme compared to suspended-bridge processes, albeit at the cost of increased sensitivity to the precise definition and reproducibility of the undercut. The experimental activity was structured in several stages. First, the positive resists PMMA and MMA, used to form the bilayer lithographic stack, were characterized in order to determine their response as a function of electron-beam exposure dose and development conditions. A calibration mask consisting of an array of square patterns exposed at varying doses was employed to extract contrast curves and identify suitable exposure parameters. The development depth was quantitatively measured using atomic force microscopy (AFM), enabling a direct correlation between exposure dose and resulting resist profile. This step proved essential for selecting the most appropriate resist configuration capable of producing a controlled undercut compatible with the requirements of the bridge-free process. Subsequently, the lithographic process and evaporation geometry were calibrated through iterative refinement of the mask design, exposure parameters, and development conditions. Cross-sectional analysis, obtained via controlled sample cleaving followed by scanning electron microscopy (SEM), played a key role in assessing the three-dimensional profile of the resist, verifying the presence and quality of the undercut, and identifying potential structural instabilities such as resist collapse. At the same time, modifications were introduced to the evaporation system to enable deposition at the desired angles. This required the design of a new sample holder and a complete recalibration of the quartz crystal microbalance, as the altered geometry significantly affected the relationship between the nominal thickness reading and the actual film thickness deposited on the sample. A further important aspect of the work involved the progressive design and optimization of the full device mask, including contact pads, alignment markers, and the active junction region. The evolution of the layout, from initial test structures to the final configuration, was guided by experimental observations of pattern distortions and dose non-uniformities. It was found that the writing order of the electron-beam lithography pattern generator could significantly influence the final pattern quality, introducing systematic variations in feature definition. To mitigate this effect, a constrained writing sequence was implemented, ensuring improved reproducibility of the exposure process. Once all process parameters were stabilized, a comprehensive Standard Operating Procedure (SOP) was established, covering both the fabrication of Cr/Au contact structures and the subsequent lithography, angled evaporation, oxidation, and lift-off steps required for the realization of the Josephson junction. Finally, prior to fabricating fully oxidized junctions, a preliminary electrical validation of the process was carried out by producing test structures without the intermediate oxidation step. This allowed for the verification of electrical continuity in the aluminum structures. Measurements performed using a probe station confirmed ohmic behavior and the absence of macroscopic discontinuities in the conduction path. The measured resistance values were higher than those predicted using bulk aluminum resistivity; however, this discrepancy is consistent with the well-known behavior of thin evaporated films, in which surface scattering, grain boundaries, and interface effects lead to an increased effective resistivity. Although these measurements do not yet constitute a full characterization of the Josephson junction in the quantum regime, they provide an essential validation of the fabrication process and the structural integrity of the devices. In conclusion, this work enabled the development and calibration of a bridge-free fabrication process for Al/AlOₓ/Al Josephson junctions, highlighting the strong interplay between lithographic control, evaporation geometry, barrier formation, and electrical response. The main contribution of the thesis lies in transforming a conceptual fabrication approach into a structured and reproducible experimental procedure, based on resist characterization, cross-sectional analysis, instrumental recalibration, and preliminary electrical validation. The results obtained provide a solid foundation for further optimization of the tunnel barrier, cryogenic characterization, and integration of these junctions into superconducting circuits for quantum computing applications.

•Apr 10, 2026•0 citations
Besides serving as promising candidates for realizing quantum computing, superconducting quantum circuits are one of a few macroscopic physical systems in which fundamental quantum phenomena can be directly demonstrated and tested, giving rise to a vast field of intensive research work both theoretically and experimentally. In this paper we report our work on the fabrication of superconducting quantum circuits, starting from its building blocks: Al/AlO x /Al Josephson junctions. By using electron beam lithography patterning and shadow evaporation, we have fabricated aluminum Josephson junctions with a controllable critical current density ( j c ) and wide range of junction sizes from 0.01 μm 2 up to 1 μm 2 . We have carried out systematical studies on the oxidation process in fabricating Al/AlO x /Al Josephson junctions suitable for superconducting flux qubits. Furthermore, we have also fabricated superconducting quantum circuits such as superconducting flux qubits and charge-flux qubits.
Abstract The most commonly used physical realization of superconducting qubits for quantum circuits is a transmon. There are a number of superconducting quantum circuits applications, where Josephson junction critical current reproducibility over a chip is crucial. Here, we report on a robust chip scale Al/AlO x /Al junctions fabrication method due to comprehensive study of shadow evaporation and oxidation steps. We experimentally demonstrate the evidence of optimal Josephson junction electrodes thickness, deposition rate and deposition angle, which ensure minimal electrode surface and line edge roughness. The influence of oxidation method, pressure and time on critical current reproducibility is determined. With the proposed method we demonstrate Al/AlO x /Al junction fabrication with the critical current variation (σ/⟨Ic⟩)(\sigma /\langle {I_{c} } \rangle )(σ/⟨Ic​⟩) ( σ / ⟨ I c ⟩ ) less than 3.9% (from 150 × 200 to 150 × 600 nm 2 area) and 7.7% (for 100 × 100 nm 2 area) over 20 × 20 mm 2 chip. Finally, we fabricate separately three 5 × 10 mm 2 chips with 18 transmon qubits (near 4.3 GHz frequency) showing less than 1.9% frequency variation between qubits on different chips. The proposed approach and optimization criteria can be utilized for a robust wafer-scale superconducting qubit circuits fabrication.
As one of the candidates for realizing quantum bits, superconducting quantum bits, based on Josephson junction, have the advantages of easy integrating, coupling with the outside environment and so on. Double-layer photoresist was used to prepare suspended shadow mask by deep ultra-violet (DUV) lithography. We fabricated the sample of superconducting flux quantum bits by electron beam evaporation and static oxidization with aluminum as superconducting material. According to the dependence of the flatness on the thickness of aluminum film, we select 60 nm as the thickness of the bottom electrode of tunnel junction. By increasing the distance between the evaporation source and the substrate, we have improved the smoothness of film and thus reduced the leakage current of tunnel junction. The tri-layer structure of aluminum tunnel junction was observed by transmission electron microscopy (TEM), and the relationship between the thickness of barrier layer and the oxidation pressure was obtained.
Nb/Al–AlO x /Nb tunnel junctions are often used in the studies of macroscopic quantum phenomena and superconducting qubit applications of the Josephson devices. In this work, we describe a convenient and reliable process using electron beam lithography for the fabrication of high-quality, submicron-sized Nb/Al–AlO x /Nb Josephson junctions. The technique follows the well-known selective Nb etching process and produces high-quality junctions with V m = 100 mV at 2.3 K for the typical critical current density of 2.2 kA/cm 2 , which can be adjusted by controlling the oxygen pressure and oxidation time during the formation of the tunnelling barrier. We present the results of the temperature dependence of the sub-gap current and in-plane magnetic-field dependence of the critical current, and compare them with the theoretical predictions.
A minimal method to fabricate Al/AlOx_xx​/Al Josephson junctions (JJs) using photolithography and argon etching, before metallization and oxidation, is demonstrated. JJs with areas ranging from 1 to 6 μμμm2^22 can be fabricated and, with the appropriate oxidation conditions, the junction resistance can be varied by $\sim$2 orders of magnitude. Transmission electron microscopy reveals the successful fabrication of JJs with few grain boundaries suggesting reduced energy loss from two-level-systems. Superconducting QUantum Interference Devices (SQUIDs) fabricated from this methodology exhibit reduced resistance variation over multiple chips, compared with electron beam lithography, and the devices can sustain repeated thermal cycles to 10 mK with the excellent flux response remaining unchanged. The quantum applications of this technology are demonstrated by embedding a SQUID resonator into a 3D cavity and parametrically amplifying low photon numbers with gains of $\sim$40 dB. This work establishes the simplest approach to fabricating JJs to date, and it could prove pivotal to the widespread utilization of superconducting circuit-based quantum technologies.
The superconductive Josephson junction is the key device for superconducting quantum computation. We have fabricated Al/Al2O3/Al tunnel junctions using a double angle evaporation method based on a suspended shadow mask. The Al2O3 junction barrier has been formed by introducing pure oxygen into the chamber during the fabrication process. We have adjusted exposure conditions by changing either the oxygen pressure or the oxidizing time during the formation of tunnel barriers to control the critical current density J c and the junction specific resistance R c . Measurements of the leakage in Al/Al2O3/Al tunnel junctions show that the devices are suitable for qubit applications.
The present thesis focuses on the laboratory fabrication of Al/AlOₓ/Al Josephson junctions using a bridge-free shadow evaporation technique, developed within the broader context of superconducting technologies for quantum computing. The interest in such devices arises from the central role played by the Josephson junction in superconducting qubits: unlike a purely harmonic LC oscillator, characterized by equally spaced energy levels, the presence of the junction introduces a nonlinearity that leads to an anharmonic energy spectrum. This allows for the selective addressing of the fundamental transition, which is a necessary condition for implementing a circuit-based qubit. In this framework, the quality of the AlOₓ tunnel barrier and of the metal interfaces is of crucial importance, as it directly affects not only the static electrical parameters of the junction but also dielectric losses and, more generally, the performance of the device in quantum applications. Following a theoretical overview of superconducting qubits and the physics of Al/AlOₓ/Al Josephson junctions, the work focuses on the experimental implementation and optimization of a bridge-free fabrication approach, adopted as an alternative to conventional suspended-bridge techniques. This method preserves the advantages of in-situ shadow evaporation for barrier formation while replacing the mechanical fragility of the suspended bridge with a geometrical control of the resist undercut. The operating principle relies on engineering an asymmetric profile in a bilayer resist system such that, during the two angled evaporations, only one deposition reaches the substrate along the connection lines, while the other is deposited on the resist sidewalls and subsequently removed during lift-off. In the central region, the overlap of the two evaporated aluminum layers, separated by an intermediate oxidation step, defines the Al/AlOₓ/Al superconductor–insulator–superconductor structure. This approach results in a more robust masking scheme compared to suspended-bridge processes, albeit at the cost of increased sensitivity to the precise definition and reproducibility of the undercut. The experimental activity was structured in several stages. First, the positive resists PMMA and MMA, used to form the bilayer lithographic stack, were characterized in order to determine their response as a function of electron-beam exposure dose and development conditions. A calibration mask consisting of an array of square patterns exposed at varying doses was employed to extract contrast curves and identify suitable exposure parameters. The development depth was quantitatively measured using atomic force microscopy (AFM), enabling a direct correlation between exposure dose and resulting resist profile. This step proved essential for selecting the most appropriate resist configuration capable of producing a controlled undercut compatible with the requirements of the bridge-free process. Subsequently, the lithographic process and evaporation geometry were calibrated through iterative refinement of the mask design, exposure parameters, and development conditions. Cross-sectional analysis, obtained via controlled sample cleaving followed by scanning electron microscopy (SEM), played a key role in assessing the three-dimensional profile of the resist, verifying the presence and quality of the undercut, and identifying potential structural instabilities such as resist collapse. At the same time, modifications were introduced to the evaporation system to enable deposition at the desired angles. This required the design of a new sample holder and a complete recalibration of the quartz crystal microbalance, as the altered geometry significantly affected the relationship between the nominal thickness reading and the actual film thickness deposited on the sample. A further important aspect of the work involved the progressive design and optimization of the full device mask, including contact pads, alignment markers, and the active junction region. The evolution of the layout, from initial test structures to the final configuration, was guided by experimental observations of pattern distortions and dose non-uniformities. It was found that the writing order of the electron-beam lithography pattern generator could significantly influence the final pattern quality, introducing systematic variations in feature definition. To mitigate this effect, a constrained writing sequence was implemented, ensuring improved reproducibility of the exposure process. Once all process parameters were stabilized, a comprehensive Standard Operating Procedure (SOP) was established, covering both the fabrication of Cr/Au contact structures and the subsequent lithography, angled evaporation, oxidation, and lift-off steps required for the realization of the Josephson junction. Finally, prior to fabricating fully oxidized junctions, a preliminary electrical validation of the process was carried out by producing test structures without the intermediate oxidation step. This allowed for the verification of electrical continuity in the aluminum structures. Measurements performed using a probe station confirmed ohmic behavior and the absence of macroscopic discontinuities in the conduction path. The measured resistance values were higher than those predicted using bulk aluminum resistivity; however, this discrepancy is consistent with the well-known behavior of thin evaporated films, in which surface scattering, grain boundaries, and interface effects lead to an increased effective resistivity. Although these measurements do not yet constitute a full characterization of the Josephson junction in the quantum regime, they provide an essential validation of the fabrication process and the structural integrity of the devices. In conclusion, this work enabled the development and calibration of a bridge-free fabrication process for Al/AlOₓ/Al Josephson junctions, highlighting the strong interplay between lithographic control, evaporation geometry, barrier formation, and electrical response. The main contribution of the thesis lies in transforming a conceptual fabrication approach into a structured and reproducible experimental procedure, based on resist characterization, cross-sectional analysis, instrumental recalibration, and preliminary electrical validation. The results obtained provide a solid foundation for further optimization of the tunnel barrier, cryogenic characterization, and integration of these junctions into superconducting circuits for quantum computing applications.