Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Towards a cryogenic planar ion trap for Sr-88

Waseem Bakr

Published Jan 1, 2006• 5 citations
OpenAlex

Abstract

This thesis describes experiments with ion traps constructed with electrodes in a single two-dimensional plane, and ion traps operated in a cryogenic environment at 77K and 4K temperatures. These two technologies address needs which arise in developing potentially scalable approaches to quantum computing using trapped ions. Traps with electrodes in a plane are challenging to load because their trap depths are usually only of order one percent that of multi-level traps of comparable dimensions. In addition, ion heating rates in these traps are higher than in multi-level traps because of the close proximity of the electrodes that is required to achieve a reasonable trap depth and the relatively resistive semiconductor electrode materials used in planar traps fabricated with standard semiconductor lithography methods. We investigate planar traps using macroscopic ions, focusing on devising techniques for loading these shallow traps and designing electrode layouts for ion movement. Using traps fabricated lithographically with copper traces on fiberglass laminate, we trap linear chains of tens of charged particles of [approx.] 400nm diameter in a rough vacuum of 15 Pa.

Related papers

Experimental investigation of planar ion traps

C. E. Pearson, David R. Leibrandt, Waseem Bakr +3 more

Chiaverini et al. [Quantum Inf. Comput. 5, 419 (2005)] recently suggested a linear Paul trap geometry for ion-trap quantum computation that places all of the electrodes in a plane. Such planar ion traps are compatible with modern semiconductor fabrication techniques and can be scaled to make compact, many-zone traps. In this paper we present an experimental realization of planar ion traps using electrodes on a printed circuit board to trap linear chains of tens of charged particles of $0.44\phantom{\rule{0.3em}{0ex}}\mathrm{\ensuremath{\mu}}\mathrm{m}$ diameter in a vacuum of $15\phantom{\rule{0.3em}{0ex}}\mathrm{Pa}\phantom{\rule{0.3em}{0ex}}({10}^{\ensuremath{-}1}\phantom{\rule{0.3em}{0ex}}\mathrm{torr})$. With these traps we address concerns about the low trap depth of planar ion traps and develop control electrode layouts for moving ions between trap zones without facing some of the technical difficulties involved in an atomic ion-trap experiment. Specifically, we use a trap with 36 zones (77 electrodes) arranged in a cross to demonstrate loading from a traditional four-rod linear Paul trap, linear ion movement, splitting and joining of ion chains, and movement of ions through intersections. We further propose an additional dc-biased electrode above the trap which increases the trap depth dramatically, and a planar ion-trap geometry that generates a two-dimensional lattice of point Paul traps.

arXiv:quant-ph/0511018•Physical Review A•Mar 3, 2006•119 citations

The development of microfabricated ion traps towards quantum information and simulation

Marcus Hughes

Trapped ions within Paul traps have shown to be a promising architecture in the realisation of a quantum information processor together with the ability of providing quantum simulations. Linear Paul traps have demonstrated long coherence times with ions being well isolated from the environment, single and multi-qubit gates and the high fidelity detection of states. The scalability to large number of qubits, incorporating all the previous achievements requires an array of linear ion traps. Microfabrication techniques allow for fabrication and micron level accuracy of the trap electrode dimensions through photolithography techniques. The first part of this thesis presents the experiential setup and trapping of Yb+ ions needed to test large ion trap arrays. This include vacuum systems that can host advanced symmetric and asymmetric ion traps with up to 90 static voltage control electrodes. Demonstration of a single trapped Yb+ ion within a two-layer macroscopic ion trap is presented. with an ion-electrode distance of 310(10) µm. The anomalous heating rate and spectral noise density of the trap was measured, a main form of decoherence within ion traps. The second half of this thesis presents the design and fabrication of multi-layer asymmetric ion traps. This allows for isolated electrodes that cannot be accessed via surface pathways, allowing for higher density of electrodes as well as creating novel trap designs that allow for the potential of quantum simulations to be demonstrated. These include two-dimensional lattices and ring trap designs in which the isolated electrodes provide more control in the ion position. For the microfabrication of these traps I present a novel high-aspect ratio electroplated electrode design that provides shielding of the dielectric layer. This provides a means to mitigate stray electric field due to charge build up on the dielectric surfaces. Electrical testing of the trap structures was performed to test bulk breakdown and surface flashover of the ion trap architectures. Results showed sufficient isolation between electrodes for both radio frequency and static breakdown. Surface flashover voltage measurements over the dielectric layer showed an improvement of more than double over previous results using a new fabrication technique. This will allow for more powerful ion trap chips needed for the next generation of microfabricated ion trap arrays for scalable quantum technologies.

•Jun 16, 2013•0 citations

Surface-electrode ion traps for scalable quantum computing

D. T. C. Allcock

The major challenges in trapped-ion quantum computation are to scale up few-ion experiments to many qubits and to improve control techniques so that quantum logic gates can be carried out with higher fidelities. This thesis reports experimental progress in both of these areas. In the early part of the thesis we describe the fabrication of a surface-electrode ion trap, the development of the apparatus and techniques required to operate it and the successful trapping of 40Ca+ ions. Notably we developed methods to control the orientation of the principal axes and to minimise ion micromotion. We propose a repumping scheme that simplifies heating rate measurements for ions with low-lying D levels, and use it to characterise the electric field noise in the trap. Surface-electrode traps are important because they offer a route to dense integration of electronic and optical control elements using existing microfabrication technology. We explore this scaling route by testing a series of three traps that were microfabricated at Sandia National Laboratories. Investigations of micromotion and charging of the surface by laser beams were carried out and improvements to future traps are suggested. Using one of these traps we also investigated anomalous electrical noise from the electrode surfaces and discovered that it can be reduced by cleaning with a pulsed laser. A factor of two decrease was observed; this represents the first in situ removal of this noise source, an important step towards higher gate fidelities. In the second half of the thesis we describe the design and construction of an experiment for the purpose of replacing laser-driven multi-qubit quantum logic gates with microwave-driven ones. We investigate magnetic-field-independent hyperfine qubits in 40Ca+ as suitable qubits for this scheme. We make a design study of how best to integrate an ion trap with the microwave conductors required to implement the gate and propose a novel integrated resonant structure. The trap was fabricated and ions were successfully loaded. Single-qubit experiments show that the microwave fields above the trap are in excellent agreement with software simulations. There are good prospects for demonstrating a multi-qubit gate in the near future. We conclude by discussing the possibilities for larger-scale quantum computation by combining microfabricated traps and microwave control.

•Jan 1, 2011•6 citations

Monolithic microfabricated ion trap forquantum information processing

Fayaz A. Shaikh

The objective of this research is to design, fabricate, and demonstrate a microfabricated \nmonolithic ion trap for applications in quantum computation and quantum simulation. \nMost current microfabricated ion trap designs are based on planar-segmented surface electrodes. \nAlthough promising scalability to trap arrays containing ten to one hundred ions, \nthese planar designs suffer from the challenges of shallow trap depths, radial asymmetry of \nthe confining potential, and electrode charging resulting from laser interactions with dielectric \nsurfaces. In this research, the design, fabrication, and testing of a monolithic \nand symmetric two-level ion trap is presented. This ion trap overcomes the challenges of \nsurface-electrode ion traps. Numerical electrostatic simulations show that this symmetric \ntrap produces a deep (1 eV for 171Yb+ ion), radially symmetric RF confinement potential. \nThe trap has an angled through-chip slot that allows back-side ion loading and generous \nthrough laser access, while avoiding surface-light scattering and dielectric charging that \ncan corrupt the design control electrode compensating potentials. The geometry of the trap \nand its dimensions are optimized for trapping long and linear ion chains with equal spacing \nfor use with quantum simulation problems and quantum computation architectures.

•Mar 26, 2013•0 citations

Cryogenic technologies for scalable trapped ion quantum computing

Anton Grounds

There has been a great deal of effort and progress made towards building a fully scalable quantum computer but there are still significant engineering challenges to overcome. Trapped ions currently represent the best fundamental technology towards achieving this goal and so they form the basis for the work in this thesis. In this thesis I describe the work towards creating a closed cycle cryogenic vacuum system driven by a Gifford McMahon cryogenic cooler. I will show the equipment required to trap a Ytterbium 174/171 ion on a cryogenic surface ion trap. The primary goal is to create a fast turn-around system for ion trap research. Room temperature systems suffer from long baking times and as such ion traps are rarely changed, this means that there is little room for testing and comparing of trap designs and predicting optimum trapping parameters as each trap is usually not changed unless there is a fault. In the cryogenic system, every effort is made to make the system generic enough to allow for any trap design to be tested and to be replaced within 24 hours. To create reliable trapping parameters we require a toolkit that can numerically simulate the required RF and DC voltages used to trap the ions above the surface of the ion trap. There are many numerical methods that can be used (FEM, FVM, BEM, FTDI, etc) and in this thesis I describe multiple methods and what their relative benefits are. Since we want to create a full toolkit to allow for chip design and optimisation, most commercial programs suffer from inadequate API interfaces or they dictate which programming languages you can interface with. This would limit our abilities to develop and optimise trapping parameters, especially in a cryogenic system where the goal is rapid deployment. To this end I created a new toolkit based on the Scuff BEM solver engine that allows us to go from AutoCAD layout to field solver and gives us accurate field potentials that match micromotion compensated voltages to within 1%. I describe a novel cryogenic resonator built out of superconducting wire based on an auto-transformer topology, I compare its strengths and weaknesses compared to other technologies already in use for trapped ion research. I also describe a novel DSUB design with integrated modular filtering which allows for 50 connections per DSUB. This DSUB is used to connect two sets of 50 wires to a PCB for wirebonding to the surface trap. This allows me to save space within the 4k shield where other PCB designs would not fit. Also it is modular in design which allows for different cutoff frequencies to be swapped out as desired. I also describe different chip mounting technologies including epoxy based, physical clamping and indium foil based. After extensive testing the indium foil diebonded approach is deemed as being the most reliable and fastest non-destructive method. I also describe a novel cryogenic coil design for generating 12T m-1 field gradients for microwave based ion gates with Ytterbium 171. I then describe the creation of a combined RF and microwave antenna for delivering coherent RF and 12.6GHz microwave radiation inside the cryogenic environment. This design is much smaller than typical waveguide typologies used. I finish by showing the first trapped ions in a cryogenic surface ion trap in the UK and heating rate tests performed on two different linear surface traps. The first trap was a sapphire based, 150µm ion height linear trap with a measured heating rate of Se(1MHz) = 5.93(10) * 10-14(V /m)2. The second ion trap is a 50k Silicon based, 100µm ion height linear trap with a measured heating rate of Se(1MHz) = 2.45(10)*10-13(V /m)2

•Jun 21, 2021•1 citation

Cryogenic ion trapping for next generation quantum technologies

De Motte, C E Darren

Quantum technology has made great strides in the last two decades with trapped ions demonstrating all the necessary building blocks for a quantum computer. While these proof of principle experiments have been demonstrated, it still remains a challenging task to scale these experiments down to smaller systems. In this thesis I describe the development of technology towards scalable cryogenic ion trapping and quantum hybrid systems. I first discuss the fundamentals of ion trapping along with the demonstration of ion trapping on a novel surface electrode ion trap with a ring shaped architecture. I then present the development of a cryogenic vacuum system for ion trapping at ~4 K, which utilizes a closed cycle Gifford McMahon cryocooler with a helium gas buffered ultra-low vibration interface to mechanically decouple a ultra-high vacuum system. Ancillary technologies are also presented, including a novel in-vacuum superconducting rf resonator, low power dissipation ceramic based atomic source oven and an adaptable in-vacuum permanent magnet system for long-wavelength based quantum logic. The design and fabrication of microfabricated surface ion traps toward quantum hybrid technologies are then presented. A superconducting ion trap with an integrated high quality factor microwave cavity and vertical ion shuttling capabilities is described. The experimental demonstration of the cavity is also presented with quality factors of Q6~6000 and Q~15000 for superconducting niobium nitride and gold based cavities respectively, which are the highest demonstrated for microwave cavities integrated within ion trapping electrode architectures. An ion trap with a multipole electrode geometry is then presented, which is capable of trapping a large number of ions simultaneously. The homogeneity of five individual linear trapping regions are optimized and the design for the principle axis rotation of each linear region is presented. An overview of microfabrication techniques used for fabricating surface electrode ion traps is then presented. This includes the detailed microfabrication procedure for ion traps designed within this thesis. A scheme for the integration of ion trapping and superconducting qubit systems as a step towards the realization of a quantum hybrid system is then presented. This scheme addresses two key diffculties in realizing such a system; a combined microfabricated ion trap and superconducting qubit architecture, and the experimental infrastructure to facilitate both technologies. Solutions that can be immediately implemented using current technology are presented. Finally, as a step towards scalability and hybrid quantum systems, the interaction between a single ion and a microwaves field produced from an on chip microwave cavity is explored. The interaction is described for the high-Q microwave cavity designed in this thesis and a 171Yb+ion. A description of the observable transmission from the cavity is described and it is shown that the presence of a single ion can indeed be observed in the emission spectrum of high-Q microwave cavity even in the weak coupling regime.

•Dec 14, 2016•0 citations
This thesis describes experiments with ion traps constructed with electrodes in a single two-dimensional plane, and ion traps operated in a cryogenic environment at 77K and 4K temperatures. These two technologies address needs which arise in developing potentially scalable approaches to quantum computing using trapped ions. Traps with electrodes in a plane are challenging to load because their trap depths are usually only of order one percent that of multi-level traps of comparable dimensions. In addition, ion heating rates in these traps are higher than in multi-level traps because of the close proximity of the electrodes that is required to achieve a reasonable trap depth and the relatively resistive semiconductor electrode materials used in planar traps fabricated with standard semiconductor lithography methods. We investigate planar traps using macroscopic ions, focusing on devising techniques for loading these shallow traps and designing electrode layouts for ion movement. Using traps fabricated lithographically with copper traces on fiberglass laminate, we trap linear chains of tens of charged particles of [approx.] 400nm diameter in a rough vacuum of 15 Pa.
Chiaverini et al. [Quantum Inf. Comput. 5, 419 (2005)] recently suggested a linear Paul trap geometry for ion-trap quantum computation that places all of the electrodes in a plane. Such planar ion traps are compatible with modern semiconductor fabrication techniques and can be scaled to make compact, many-zone traps. In this paper we present an experimental realization of planar ion traps using electrodes on a printed circuit board to trap linear chains of tens of charged particles of $0.44\phantom{\rule{0.3em}{0ex}}\mathrm{\ensuremath{\mu}}\mathrm{m}$ diameter in a vacuum of $15\phantom{\rule{0.3em}{0ex}}\mathrm{Pa}\phantom{\rule{0.3em}{0ex}}({10}^{\ensuremath{-}1}\phantom{\rule{0.3em}{0ex}}\mathrm{torr})$. With these traps we address concerns about the low trap depth of planar ion traps and develop control electrode layouts for moving ions between trap zones without facing some of the technical difficulties involved in an atomic ion-trap experiment. Specifically, we use a trap with 36 zones (77 electrodes) arranged in a cross to demonstrate loading from a traditional four-rod linear Paul trap, linear ion movement, splitting and joining of ion chains, and movement of ions through intersections. We further propose an additional dc-biased electrode above the trap which increases the trap depth dramatically, and a planar ion-trap geometry that generates a two-dimensional lattice of point Paul traps.
Trapped ions within Paul traps have shown to be a promising architecture in the realisation of a quantum information processor together with the ability of providing quantum simulations. Linear Paul traps have demonstrated long coherence times with ions being well isolated from the environment, single and multi-qubit gates and the high fidelity detection of states. The scalability to large number of qubits, incorporating all the previous achievements requires an array of linear ion traps. Microfabrication techniques allow for fabrication and micron level accuracy of the trap electrode dimensions through photolithography techniques. The first part of this thesis presents the experiential setup and trapping of Yb+ ions needed to test large ion trap arrays. This include vacuum systems that can host advanced symmetric and asymmetric ion traps with up to 90 static voltage control electrodes. Demonstration of a single trapped Yb+ ion within a two-layer macroscopic ion trap is presented. with an ion-electrode distance of 310(10) µm. The anomalous heating rate and spectral noise density of the trap was measured, a main form of decoherence within ion traps. The second half of this thesis presents the design and fabrication of multi-layer asymmetric ion traps. This allows for isolated electrodes that cannot be accessed via surface pathways, allowing for higher density of electrodes as well as creating novel trap designs that allow for the potential of quantum simulations to be demonstrated. These include two-dimensional lattices and ring trap designs in which the isolated electrodes provide more control in the ion position. For the microfabrication of these traps I present a novel high-aspect ratio electroplated electrode design that provides shielding of the dielectric layer. This provides a means to mitigate stray electric field due to charge build up on the dielectric surfaces. Electrical testing of the trap structures was performed to test bulk breakdown and surface flashover of the ion trap architectures. Results showed sufficient isolation between electrodes for both radio frequency and static breakdown. Surface flashover voltage measurements over the dielectric layer showed an improvement of more than double over previous results using a new fabrication technique. This will allow for more powerful ion trap chips needed for the next generation of microfabricated ion trap arrays for scalable quantum technologies.
The major challenges in trapped-ion quantum computation are to scale up few-ion experiments to many qubits and to improve control techniques so that quantum logic gates can be carried out with higher fidelities. This thesis reports experimental progress in both of these areas. In the early part of the thesis we describe the fabrication of a surface-electrode ion trap, the development of the apparatus and techniques required to operate it and the successful trapping of 40Ca+ ions. Notably we developed methods to control the orientation of the principal axes and to minimise ion micromotion. We propose a repumping scheme that simplifies heating rate measurements for ions with low-lying D levels, and use it to characterise the electric field noise in the trap. Surface-electrode traps are important because they offer a route to dense integration of electronic and optical control elements using existing microfabrication technology. We explore this scaling route by testing a series of three traps that were microfabricated at Sandia National Laboratories. Investigations of micromotion and charging of the surface by laser beams were carried out and improvements to future traps are suggested. Using one of these traps we also investigated anomalous electrical noise from the electrode surfaces and discovered that it can be reduced by cleaning with a pulsed laser. A factor of two decrease was observed; this represents the first in situ removal of this noise source, an important step towards higher gate fidelities. In the second half of the thesis we describe the design and construction of an experiment for the purpose of replacing laser-driven multi-qubit quantum logic gates with microwave-driven ones. We investigate magnetic-field-independent hyperfine qubits in 40Ca+ as suitable qubits for this scheme. We make a design study of how best to integrate an ion trap with the microwave conductors required to implement the gate and propose a novel integrated resonant structure. The trap was fabricated and ions were successfully loaded. Single-qubit experiments show that the microwave fields above the trap are in excellent agreement with software simulations. There are good prospects for demonstrating a multi-qubit gate in the near future. We conclude by discussing the possibilities for larger-scale quantum computation by combining microfabricated traps and microwave control.
The objective of this research is to design, fabricate, and demonstrate a microfabricated \nmonolithic ion trap for applications in quantum computation and quantum simulation. \nMost current microfabricated ion trap designs are based on planar-segmented surface electrodes. \nAlthough promising scalability to trap arrays containing ten to one hundred ions, \nthese planar designs suffer from the challenges of shallow trap depths, radial asymmetry of \nthe confining potential, and electrode charging resulting from laser interactions with dielectric \nsurfaces. In this research, the design, fabrication, and testing of a monolithic \nand symmetric two-level ion trap is presented. This ion trap overcomes the challenges of \nsurface-electrode ion traps. Numerical electrostatic simulations show that this symmetric \ntrap produces a deep (1 eV for 171Yb+ ion), radially symmetric RF confinement potential. \nThe trap has an angled through-chip slot that allows back-side ion loading and generous \nthrough laser access, while avoiding surface-light scattering and dielectric charging that \ncan corrupt the design control electrode compensating potentials. The geometry of the trap \nand its dimensions are optimized for trapping long and linear ion chains with equal spacing \nfor use with quantum simulation problems and quantum computation architectures.
There has been a great deal of effort and progress made towards building a fully scalable quantum computer but there are still significant engineering challenges to overcome. Trapped ions currently represent the best fundamental technology towards achieving this goal and so they form the basis for the work in this thesis. In this thesis I describe the work towards creating a closed cycle cryogenic vacuum system driven by a Gifford McMahon cryogenic cooler. I will show the equipment required to trap a Ytterbium 174/171 ion on a cryogenic surface ion trap. The primary goal is to create a fast turn-around system for ion trap research. Room temperature systems suffer from long baking times and as such ion traps are rarely changed, this means that there is little room for testing and comparing of trap designs and predicting optimum trapping parameters as each trap is usually not changed unless there is a fault. In the cryogenic system, every effort is made to make the system generic enough to allow for any trap design to be tested and to be replaced within 24 hours. To create reliable trapping parameters we require a toolkit that can numerically simulate the required RF and DC voltages used to trap the ions above the surface of the ion trap. There are many numerical methods that can be used (FEM, FVM, BEM, FTDI, etc) and in this thesis I describe multiple methods and what their relative benefits are. Since we want to create a full toolkit to allow for chip design and optimisation, most commercial programs suffer from inadequate API interfaces or they dictate which programming languages you can interface with. This would limit our abilities to develop and optimise trapping parameters, especially in a cryogenic system where the goal is rapid deployment. To this end I created a new toolkit based on the Scuff BEM solver engine that allows us to go from AutoCAD layout to field solver and gives us accurate field potentials that match micromotion compensated voltages to within 1%. I describe a novel cryogenic resonator built out of superconducting wire based on an auto-transformer topology, I compare its strengths and weaknesses compared to other technologies already in use for trapped ion research. I also describe a novel DSUB design with integrated modular filtering which allows for 50 connections per DSUB. This DSUB is used to connect two sets of 50 wires to a PCB for wirebonding to the surface trap. This allows me to save space within the 4k shield where other PCB designs would not fit. Also it is modular in design which allows for different cutoff frequencies to be swapped out as desired. I also describe different chip mounting technologies including epoxy based, physical clamping and indium foil based. After extensive testing the indium foil diebonded approach is deemed as being the most reliable and fastest non-destructive method. I also describe a novel cryogenic coil design for generating 12T m-1 field gradients for microwave based ion gates with Ytterbium 171. I then describe the creation of a combined RF and microwave antenna for delivering coherent RF and 12.6GHz microwave radiation inside the cryogenic environment. This design is much smaller than typical waveguide typologies used. I finish by showing the first trapped ions in a cryogenic surface ion trap in the UK and heating rate tests performed on two different linear surface traps. The first trap was a sapphire based, 150µm ion height linear trap with a measured heating rate of Se(1MHz) = 5.93(10) * 10-14(V /m)2. The second ion trap is a 50k Silicon based, 100µm ion height linear trap with a measured heating rate of Se(1MHz) = 2.45(10)*10-13(V /m)2
Quantum technology has made great strides in the last two decades with trapped ions demonstrating all the necessary building blocks for a quantum computer. While these proof of principle experiments have been demonstrated, it still remains a challenging task to scale these experiments down to smaller systems. In this thesis I describe the development of technology towards scalable cryogenic ion trapping and quantum hybrid systems. I first discuss the fundamentals of ion trapping along with the demonstration of ion trapping on a novel surface electrode ion trap with a ring shaped architecture. I then present the development of a cryogenic vacuum system for ion trapping at ~4 K, which utilizes a closed cycle Gifford McMahon cryocooler with a helium gas buffered ultra-low vibration interface to mechanically decouple a ultra-high vacuum system. Ancillary technologies are also presented, including a novel in-vacuum superconducting rf resonator, low power dissipation ceramic based atomic source oven and an adaptable in-vacuum permanent magnet system for long-wavelength based quantum logic. The design and fabrication of microfabricated surface ion traps toward quantum hybrid technologies are then presented. A superconducting ion trap with an integrated high quality factor microwave cavity and vertical ion shuttling capabilities is described. The experimental demonstration of the cavity is also presented with quality factors of Q6~6000 and Q~15000 for superconducting niobium nitride and gold based cavities respectively, which are the highest demonstrated for microwave cavities integrated within ion trapping electrode architectures. An ion trap with a multipole electrode geometry is then presented, which is capable of trapping a large number of ions simultaneously. The homogeneity of five individual linear trapping regions are optimized and the design for the principle axis rotation of each linear region is presented. An overview of microfabrication techniques used for fabricating surface electrode ion traps is then presented. This includes the detailed microfabrication procedure for ion traps designed within this thesis. A scheme for the integration of ion trapping and superconducting qubit systems as a step towards the realization of a quantum hybrid system is then presented. This scheme addresses two key diffculties in realizing such a system; a combined microfabricated ion trap and superconducting qubit architecture, and the experimental infrastructure to facilitate both technologies. Solutions that can be immediately implemented using current technology are presented. Finally, as a step towards scalability and hybrid quantum systems, the interaction between a single ion and a microwaves field produced from an on chip microwave cavity is explored. The interaction is described for the high-Q microwave cavity designed in this thesis and a 171Yb+ion. A description of the observable transmission from the cavity is described and it is shown that the presence of a single ion can indeed be observed in the emission spectrum of high-Q microwave cavity even in the weak coupling regime.