Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cambridge University Press eBooks

The tensor product and partial trace

Kurt A. Jacobs

Published Aug 14, 2014• 1 citation
Publisher

Abstract

Combining two systems: the tensor product The state of a quantum system is a vector in a complex vector space. (Technically, if the dimension of the vector space is infinite, then it is a separable Hilbert space.) Here we will always assume that our systems are finite-dimensional. We do this because everything we will discuss transfers without change to infinite-dimensional systems. Further, when one actually simulates a system on a computer, one must always truncate an infinite-dimensional space so that it is finite. Consider two separate quantum systems. Now consider the fact that if we take them together, then we should be able to describe them as one big quantum system. That is, instead of describing them by two separate state vectors, one for each system, we should be able to represent the states of both of them together using one single state vector. (This state vector will naturally need to have more elements in it than the separate state-vectors for each of the systems, and we will work out exactly how many below.) In fact, in order to describe a situation in which the two systems have affected each other – by interacting in some way – and have become correlated with each other as a result of this interaction, we will need to go beyond using a separate state vector for each. If each system is in a pure state, described by a state vector for it alone, then there are no correlations between the two systems. Using a single state vector to describe the joint state of the two systems is the natural way to describe all possible states that the two systems could be in (correlated or uncorrelated). We now show how this is done.

DOI
10.1017/cbo9781139179027.010

Related papers

Hilbert space factorization and partial measurements

Gunnar G. Bjork, P. Jonsson, Hoshang Heydari +2 more

A quantum system whose state vector belongs to a finite-dimensional Hilbert space is considered. If this space has a dimension that is a composite number, one can factor the space into a tensor product of sub-spaces. An observable that acts only in one of these subspaces is called a partial measurement. Some of the properties and the interpretation of such partial measurements are discussed.

Optics and Spectroscopy•May 1, 2003•1 citation

Infinite-Dimensional Complex Vectors and Hilbert Spaces

K. Kong Wan

For a quantum system with observables capable of assuming an infinite number of different values we would need an infinite-dimensional complex vector space to serve as its state space. Every Cauchy sequence of vectors in a finite-dimensional complex vector space converges to a limit vector in the space the same is not true in an arbitrary infinite-dimensional complex scalar product space. Fortunately infinite-dimensional scalar product spaces of physical importance are such that all Cauchy sequences do converge. Such spaces are called Hilbert spaces. Since every Cauchy sequence in a finite-dimensional scalar product space converges they are automatically Hilbert spaces. The situation in infinite-dimensional spaces is different. With Riemann integrals for square integrability and the scalar product replaced by Lebesque integrals we would obtain a larger set of functions which are Lebesque square-integrable.

•Jul 9, 2019•0 citations

Tsirelson's Problem

Volkher B. Scholz, Reinhard F. Werner

The situation of two independent observers conducting measurements on a joint quantum system is usually modelled using a Hilbert space of tensor product form, each factor associated to one observer. Correspondingly, the operators describing the observables are then acting non-trivially only on one of the tensor factors. However, the same situation can also be modelled by just using one joint Hilbert space, and requiring that all operators associated to different observers commute, i.e. are jointly measurable without causing disturbance. The problem of Tsirelson is now to decide the question whether all quantum correlation functions between two independent observers derived from commuting observables can also be expressed using observables defined on a Hilbert space of tensor product form. Tsirelson showed already that the distinction is irrelevant in the case that the ambient Hilbert space is of finite dimension. We show here that the problem is equivalent to the question whether all quantum correlation functions can be approximated by correlation function derived from finite-dimensional systems. We also discuss some physical examples which fulfill this requirement.

arXiv:0812.4305•Dec 22, 2008•134 citations

The Unifying Role of Hilbert Space in Quantum Field Theory and Information Science

Mehmet Keçeci

Hilbert spaces provide the fundamental mathematical framework for describing quantum mechanical systems. Their structure, characterized by an inner product and completeness, allows for the representation of quantum states as vectors and physical observables as self-adjoint operators. Key quantum phenomena such as superposition and entanglement find natural expression within this formalism. Superposition, where a quantum system can exist in multiple states simultaneously, is represented by linear combinations of basis vectors in the Hilbert space. Entanglement, a non-classical correlation between quantum systems, is described by non-separable state vectors in a tensor product of Hilbert spaces. These concepts are pivotal in quantum computing, where the unit of information, the qubit, is a two-level quantum system whose state is a vector in a two-dimensional complex Hilbert space (ℂ²). Quantum gates, which perform operations on qubits, are represented by unitary operators acting on these state vectors. The power of quantum computation, particularly in algorithms like Shor's or Grover's, stems from the ability to exploit superposition and entanglement, processes intrinsically described within the Hilbert space framework. Thus, a thorough understanding of Hilbert spaces is indispensable for grasping the principles of quantum mechanics and for advancing the field of quantum information and computation [1, 7]. The transition from classical bits to quantum qubits, and from classical logic gates to quantum unitary operations, is entirely predicated on the mathematical properties endowed by Hilbert spaces.

•Aug 4, 2025•2 citations

The Unifying Role of Hilbert Space in Quantum Field Theory and Information Science

Mehmet Keçeci

Hilbert spaces provide the fundamental mathematical framework for describing quantum mechanical systems. Their structure, characterized by an inner product and completeness, allows for the representation of quantum states as vectors and physical observables as self-adjoint operators. Key quantum phenomena such as superposition and entanglement find natural expression within this formalism. Superposition, where a quantum system can exist in multiple states simultaneously, is represented by linear combinations of basis vectors in the Hilbert space. Entanglement, a non-classical correlation between quantum systems, is described by non-separable state vectors in a tensor product of Hilbert spaces. These concepts are pivotal in quantum computing, where the unit of information, the qubit, is a two-level quantum system whose state is a vector in a two-dimensional complex Hilbert space (ℂ²). Quantum gates, which perform operations on qubits, are represented by unitary operators acting on these state vectors. The power of quantum computation, particularly in algorithms like Shor's or Grover's, stems from the ability to exploit superposition and entanglement, processes intrinsically described within the Hilbert space framework. Thus, a thorough understanding of Hilbert spaces is indispensable for grasping the principles of quantum mechanics and for advancing the field of quantum information and computation [1, 7]. The transition from classical bits to quantum qubits, and from classical logic gates to quantum unitary operations, is entirely predicated on the mathematical properties endowed by Hilbert spaces.

•Aug 6, 2025•2 citations

On the Relation between States and Maps in Infinite Dimensions

Janusz Grabowski, Marek Kuś, Giuseppe Marmo

Relations between states and maps, which are known for quantum systems in finite-dimensional Hilbert spaces, are formulated rigorously in geometrical terms with no use of coordinate (matrix) interpretation. In a tensor product realization they are represented simply by a permutation of factors. This leads to natural generalizations for infinite-dimensional Hilbert spaces and a simple proof of a generalized Choi Theorem. The natural framework is based on spaces of Hilbert-Schmidt operators [Formula: see text] and the corresponding tensor products [Formula: see text] of Hilbert spaces. It is proved that the corresponding isomorphisms cannot be naturally extended to compact (or bounded) operators, nor reduced to the trace-class operators. On the other hand, it is proven that there is a natural continuous map [Formula: see text] from trace-class operators on [Formula: see text] (with the nuclear norm) into compact operators mapping the space of all bounded operators on [Formula: see text] into trace class operators on [Formula: see text] (with the operator-norm). Also in the infinite-dimensional context, the Schmidt measure of entanglement and multipartite generalizations of state-maps relations are considered in the paper.

arXiv:0706.2617•Open Systems & Information Dynamics•Dec 1, 2007•16 citations
Combining two systems: the tensor product The state of a quantum system is a vector in a complex vector space. (Technically, if the dimension of the vector space is infinite, then it is a separable Hilbert space.) Here we will always assume that our systems are finite-dimensional. We do this because everything we will discuss transfers without change to infinite-dimensional systems. Further, when one actually simulates a system on a computer, one must always truncate an infinite-dimensional space so that it is finite. Consider two separate quantum systems. Now consider the fact that if we take them together, then we should be able to describe them as one big quantum system. That is, instead of describing them by two separate state vectors, one for each system, we should be able to represent the states of both of them together using one single state vector. (This state vector will naturally need to have more elements in it than the separate state-vectors for each of the systems, and we will work out exactly how many below.) In fact, in order to describe a situation in which the two systems have affected each other – by interacting in some way – and have become correlated with each other as a result of this interaction, we will need to go beyond using a separate state vector for each. If each system is in a pure state, described by a state vector for it alone, then there are no correlations between the two systems. Using a single state vector to describe the joint state of the two systems is the natural way to describe all possible states that the two systems could be in (correlated or uncorrelated). We now show how this is done.
For a quantum system with observables capable of assuming an infinite number of different values we would need an infinite-dimensional complex vector space to serve as its state space. Every Cauchy sequence of vectors in a finite-dimensional complex vector space converges to a limit vector in the space the same is not true in an arbitrary infinite-dimensional complex scalar product space. Fortunately infinite-dimensional scalar product spaces of physical importance are such that all Cauchy sequences do converge. Such spaces are called Hilbert spaces. Since every Cauchy sequence in a finite-dimensional scalar product space converges they are automatically Hilbert spaces. The situation in infinite-dimensional spaces is different. With Riemann integrals for square integrability and the scalar product replaced by Lebesque integrals we would obtain a larger set of functions which are Lebesque square-integrable.
The situation of two independent observers conducting measurements on a joint quantum system is usually modelled using a Hilbert space of tensor product form, each factor associated to one observer. Correspondingly, the operators describing the observables are then acting non-trivially only on one of the tensor factors. However, the same situation can also be modelled by just using one joint Hilbert space, and requiring that all operators associated to different observers commute, i.e. are jointly measurable without causing disturbance. The problem of Tsirelson is now to decide the question whether all quantum correlation functions between two independent observers derived from commuting observables can also be expressed using observables defined on a Hilbert space of tensor product form. Tsirelson showed already that the distinction is irrelevant in the case that the ambient Hilbert space is of finite dimension. We show here that the problem is equivalent to the question whether all quantum correlation functions can be approximated by correlation function derived from finite-dimensional systems. We also discuss some physical examples which fulfill this requirement.
Hilbert spaces provide the fundamental mathematical framework for describing quantum mechanical systems. Their structure, characterized by an inner product and completeness, allows for the representation of quantum states as vectors and physical observables as self-adjoint operators. Key quantum phenomena such as superposition and entanglement find natural expression within this formalism. Superposition, where a quantum system can exist in multiple states simultaneously, is represented by linear combinations of basis vectors in the Hilbert space. Entanglement, a non-classical correlation between quantum systems, is described by non-separable state vectors in a tensor product of Hilbert spaces. These concepts are pivotal in quantum computing, where the unit of information, the qubit, is a two-level quantum system whose state is a vector in a two-dimensional complex Hilbert space (ℂ²). Quantum gates, which perform operations on qubits, are represented by unitary operators acting on these state vectors. The power of quantum computation, particularly in algorithms like Shor's or Grover's, stems from the ability to exploit superposition and entanglement, processes intrinsically described within the Hilbert space framework. Thus, a thorough understanding of Hilbert spaces is indispensable for grasping the principles of quantum mechanics and for advancing the field of quantum information and computation [1, 7]. The transition from classical bits to quantum qubits, and from classical logic gates to quantum unitary operations, is entirely predicated on the mathematical properties endowed by Hilbert spaces.
Hilbert spaces provide the fundamental mathematical framework for describing quantum mechanical systems. Their structure, characterized by an inner product and completeness, allows for the representation of quantum states as vectors and physical observables as self-adjoint operators. Key quantum phenomena such as superposition and entanglement find natural expression within this formalism. Superposition, where a quantum system can exist in multiple states simultaneously, is represented by linear combinations of basis vectors in the Hilbert space. Entanglement, a non-classical correlation between quantum systems, is described by non-separable state vectors in a tensor product of Hilbert spaces. These concepts are pivotal in quantum computing, where the unit of information, the qubit, is a two-level quantum system whose state is a vector in a two-dimensional complex Hilbert space (ℂ²). Quantum gates, which perform operations on qubits, are represented by unitary operators acting on these state vectors. The power of quantum computation, particularly in algorithms like Shor's or Grover's, stems from the ability to exploit superposition and entanglement, processes intrinsically described within the Hilbert space framework. Thus, a thorough understanding of Hilbert spaces is indispensable for grasping the principles of quantum mechanics and for advancing the field of quantum information and computation [1, 7]. The transition from classical bits to quantum qubits, and from classical logic gates to quantum unitary operations, is entirely predicated on the mathematical properties endowed by Hilbert spaces.
Relations between states and maps, which are known for quantum systems in finite-dimensional Hilbert spaces, are formulated rigorously in geometrical terms with no use of coordinate (matrix) interpretation. In a tensor product realization they are represented simply by a permutation of factors. This leads to natural generalizations for infinite-dimensional Hilbert spaces and a simple proof of a generalized Choi Theorem. The natural framework is based on spaces of Hilbert-Schmidt operators [Formula: see text] and the corresponding tensor products [Formula: see text] of Hilbert spaces. It is proved that the corresponding isomorphisms cannot be naturally extended to compact (or bounded) operators, nor reduced to the trace-class operators. On the other hand, it is proven that there is a natural continuous map [Formula: see text] from trace-class operators on [Formula: see text] (with the nuclear norm) into compact operators mapping the space of all bounded operators on [Formula: see text] into trace class operators on [Formula: see text] (with the operator-norm). Also in the infinite-dimensional context, the Schmidt measure of entanglement and multipartite generalizations of state-maps relations are considered in the paper.