Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Error Correction for Noisy Quantum Wires

Alastair Kay

Published Jul 22, 2015• 2 citations
OpenAlex

Abstract

Quantum wires can transport quantum states between distant locations in a solid state scenario without the need for intricate controls in the intervening distance. Fixed usage, time independent schemes permit the pre-manufacture and characterisation of the wires, minimising the resultant error. Nevertheless, noise inevitably enters the system and, even if it acts locally on a single spin at a single instant of time, the intrinsic dynamics of the system rapidly propagate it into a massively correlated error. By modifying the error correction procedure, we prove that in spite of this, standard error correcting codes (the Calderbank-Shor-Steane codes) can be used to protect states against sufficiently low rates of noise during transport through a perfect quantum wire.

Related papers

Quantum error correction for state transfer in noisy spin chains

Alastair Kay

Can robustness against experimental imperfections and noise be embedded into a quantum simulation? In this paper, we report on a special case in which this is possible. A spin chain can be engineered such that, in the absence of imperfections and noise, an unknown quantum state is transported from one end of the chain to the other, due only to the intrinsic dynamics of the system. We show that an encoding into a standard error-correcting code (a Calderbank-Shor-Steane code) can be embedded into this simulation task such that a modified error-correction procedure on readout can recover from sufficiently low rates of noise during transport.

arXiv:1507.06139•Physical Review A•Apr 14, 2016•24 citations

Quantum error correction against correlated noise

James Clemens, Shabnam Siddiqui, Julio R. Gea-Banacloche

We consider quantum error correction against correlated noise using simple and concatenated Calderbank-Shor-Steane codes as well as $n$-qubit repetition codes. We characterize the performance of various codes by means of the fidelity following the error correction of a single logical qubit in a quantum register. For concatenated codes we find a threshold in the single-qubit error rate below which the encoded qubit is perfectly protected. The threshold depends on the correlation strength of the noise and goes to zero for perfect correlation. Finally, we concatenate the traditional error correcting codes with a decoherence free subspace and evaluate the performance over the whole range from uncorrelated noise to perfectly correlated noise.

Physical Review A•Jun 14, 2004•67 citations

Quantum Error Correction

Ping Dong, Jinsoo Kim

We consider quantum error-correcting codes over alphabets of arbitrary size. We generalize quantum stabilizer codes and develop Calderbank-Shor-Steane construction over quantum systems of arbitrary dimensions using the group structure of alphabets. We also develop a methodology systematically conjoining error-correcting codes into a new class of error-correcting codes. With the help of these methods we give several ways to construct quantum maximum distance separable (MDS) codes and present many families of quantum MDS codes.

•Jul 6, 2005•0 citations

Quantum Error Correction with Reflexive Stabilizer Codes and Cayley Graphs.

Robert R. Vandermolen, Duncan Wright

Long distance communication of digital data, whether through a physical medium or a broadcast signal, is often subjected to noise. To deliver data reliably through noisy communication channels, one must use codes that can detect and correct the particular noise of the channel. For transmission of classical data, error correcting schemes can be as simple as the sending of replicates. For quantum data, and in tandem the development of machines that can process quantum data, quantum error correcting codes must be developed. In addition to a larger set of possible errors, quantum error correcting schemes must contend with other peculiarities of quantum mechanics, such as the no-cloning theorem which can prevent the sending of replicate messages. Stabilizer codes are one family of quantum error correcting codes which can protect and correct errors expressed in terms of the Pauli group, exploiting its group structure and utilizing classical codes and the corresponding duals. We develop and examine a family of quantum stabilizer codes which arise from reflexive stabilizers. Moreover, we provide a mapping from our reflexive stabilizer codes to the well-known CSS codes developed by Calderbank, Shor, and Steane. For the case of a 4-state system we show that these codes can obtain the minimal embedding for code which can correct any flip or phase error. We also provide heuristic algorithms for creating reflexive stabilizer codes starting from the noise of a quantum channel. Furthermore, we show that the problem can be posed in terms of finding maximal Cayley subgraphs with restrictions imposed by the set of potential errors.

•Oct 16, 2021•0 citations

Quantum error correction assisted by two-way noisy communication

Zhuo Wang, Sixia Yu, Heng Fan +1 more

Pre-shared non-local entanglement dramatically simplifies and improves the performance of quantum error correction via entanglement-assisted quantum error-correcting codes (EAQECCs). However, even considering the noise in quantum communication only, the non-local sharing of a perfectly entangled pair is technically impossible unless additional resources are consumed, such as entanglement distillation, which actually compromises the efficiency of the codes. Here we propose an error-correcting protocol assisted by two-way noisy communication that is more easily realisable: all quantum communication is subjected to general noise and all entanglement is created locally without additional resources consumed. In our protocol the pre-shared noisy entangled pairs are purified simultaneously by the decoding process. For demonstration, we first present an easier implementation of the well-known EAQECC [[4, 1, 3; 1]]. Then, we construct for the first time a 1-error-correcting code of 4 physical qudits capable of encoding 1 qubit of information, which is impossible in standard quantum error correction, demonstrating that our protocol can also improve the encoding rate in some sense. A systematic construction of two-way-noisy-communication-assisted codes is also provided.

Scientific Reports•Nov 26, 2014•1 citation

How to counteract systematic errors in quantum state transfer

Chiara Marletto, Alastair Kay, ARTUR K. EKERT

In the absence of errors, the dynamics of a spin chain, with a suitably engineered local Hamiltonian, allow the perfect, coherent transfer of a quantum state over large distances. Here, we propose encoding and decoding procedures to recover perfectly from low rates of systematic errors. The encoding and decoding regions, located at opposite ends of the chain, are small compared to the length of the chain, growing linearly with the size of the error. We also describe how these errors can be identified, again by only acting on the encoding and decoding regions.

arXiv:1202.2978•Quantum Information and Computation•Jul 1, 2012•4 citations
Quantum wires can transport quantum states between distant locations in a solid state scenario without the need for intricate controls in the intervening distance. Fixed usage, time independent schemes permit the pre-manufacture and characterisation of the wires, minimising the resultant error. Nevertheless, noise inevitably enters the system and, even if it acts locally on a single spin at a single instant of time, the intrinsic dynamics of the system rapidly propagate it into a massively correlated error. By modifying the error correction procedure, we prove that in spite of this, standard error correcting codes (the Calderbank-Shor-Steane codes) can be used to protect states against sufficiently low rates of noise during transport through a perfect quantum wire.
Can robustness against experimental imperfections and noise be embedded into a quantum simulation? In this paper, we report on a special case in which this is possible. A spin chain can be engineered such that, in the absence of imperfections and noise, an unknown quantum state is transported from one end of the chain to the other, due only to the intrinsic dynamics of the system. We show that an encoding into a standard error-correcting code (a Calderbank-Shor-Steane code) can be embedded into this simulation task such that a modified error-correction procedure on readout can recover from sufficiently low rates of noise during transport.
We consider quantum error correction against correlated noise using simple and concatenated Calderbank-Shor-Steane codes as well as nnn-qubit repetition codes. We characterize the performance of various codes by means of the fidelity following the error correction of a single logical qubit in a quantum register. For concatenated codes we find a threshold in the single-qubit error rate below which the encoded qubit is perfectly protected. The threshold depends on the correlation strength of the noise and goes to zero for perfect correlation. Finally, we concatenate the traditional error correcting codes with a decoherence free subspace and evaluate the performance over the whole range from uncorrelated noise to perfectly correlated noise.
We consider quantum error-correcting codes over alphabets of arbitrary size. We generalize quantum stabilizer codes and develop Calderbank-Shor-Steane construction over quantum systems of arbitrary dimensions using the group structure of alphabets. We also develop a methodology systematically conjoining error-correcting codes into a new class of error-correcting codes. With the help of these methods we give several ways to construct quantum maximum distance separable (MDS) codes and present many families of quantum MDS codes.
Long distance communication of digital data, whether through a physical medium or a broadcast signal, is often subjected to noise. To deliver data reliably through noisy communication channels, one must use codes that can detect and correct the particular noise of the channel. For transmission of classical data, error correcting schemes can be as simple as the sending of replicates. For quantum data, and in tandem the development of machines that can process quantum data, quantum error correcting codes must be developed. In addition to a larger set of possible errors, quantum error correcting schemes must contend with other peculiarities of quantum mechanics, such as the no-cloning theorem which can prevent the sending of replicate messages. Stabilizer codes are one family of quantum error correcting codes which can protect and correct errors expressed in terms of the Pauli group, exploiting its group structure and utilizing classical codes and the corresponding duals. We develop and examine a family of quantum stabilizer codes which arise from reflexive stabilizers. Moreover, we provide a mapping from our reflexive stabilizer codes to the well-known CSS codes developed by Calderbank, Shor, and Steane. For the case of a 4-state system we show that these codes can obtain the minimal embedding for code which can correct any flip or phase error. We also provide heuristic algorithms for creating reflexive stabilizer codes starting from the noise of a quantum channel. Furthermore, we show that the problem can be posed in terms of finding maximal Cayley subgraphs with restrictions imposed by the set of potential errors.
Pre-shared non-local entanglement dramatically simplifies and improves the performance of quantum error correction via entanglement-assisted quantum error-correcting codes (EAQECCs). However, even considering the noise in quantum communication only, the non-local sharing of a perfectly entangled pair is technically impossible unless additional resources are consumed, such as entanglement distillation, which actually compromises the efficiency of the codes. Here we propose an error-correcting protocol assisted by two-way noisy communication that is more easily realisable: all quantum communication is subjected to general noise and all entanglement is created locally without additional resources consumed. In our protocol the pre-shared noisy entangled pairs are purified simultaneously by the decoding process. For demonstration, we first present an easier implementation of the well-known EAQECC [[4, 1, 3; 1]]. Then, we construct for the first time a 1-error-correcting code of 4 physical qudits capable of encoding 1 qubit of information, which is impossible in standard quantum error correction, demonstrating that our protocol can also improve the encoding rate in some sense. A systematic construction of two-way-noisy-communication-assisted codes is also provided.
In the absence of errors, the dynamics of a spin chain, with a suitably engineered local Hamiltonian, allow the perfect, coherent transfer of a quantum state over large distances. Here, we propose encoding and decoding procedures to recover perfectly from low rates of systematic errors. The encoding and decoding regions, located at opposite ends of the chain, are small compared to the length of the chain, growing linearly with the size of the error. We also describe how these errors can be identified, again by only acting on the encoding and decoding regions.