Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Electronic Components and Technology Conference (ECTC)

Micro-fabricated spherical rubidium vapor cell and its integration in 3-axis atomic magnetometer

Yu Ji, Jintang Shang, Qi Gan, Lei Wu, Ching‐Ping Wong

Published May 1, 2015• 9 citations
Publisher

Abstract

High sensitive atomic magnetometers play an important role in many fields including geophysical mapping, space science, nuclear magnetic resonance, health care and perimeter and remote monitoring. In this study, a novel method to fabricate the micro spherical Rubidium vapor cell has been investigated and the integration of micro spherical rubidium vapor cell in 3-axis atomic magnetometer has been demonstrated successfully. First of all, a fabrication process for micro spherical alkali vapor cells is introduced. Then the prepared uniform wafer-level micro spherical rubidium vapor cell has been characterized by Ultraviolet spectrophotometer as well as a laser frequency locking system. At last, 3-axis atomic magnetometer based on the micro spherical rubidium vapor cell has been demonstrated. Results show that micro spherical rubidium vapor cell has been fabricated successfully. Results also indicate that a 3-axis atomic magnetometer based on the micro spherical rubidium vapor cell could measure magnetic fields along three directions (BX, BYand BZ).

DOI
10.1109/ectc.2015.7159708

Related papers

Preparation of a Micro Rubidium vapor cell and its integration in a chip-scale atomic magnetometer

Yu Ji, Jintang Shang, You‐Peng Chen +1 more

Micro Rubidium vapor cell has very important research values in many fields including atomic magnetometer, atomic clock, atomic gyroscope and so on. In this study, a new method to fabricate the micro Rubidium vapor cell has been investigated and uniform wafer-level micro Rubidium vapor cells, which could be used in atomic devices, have been prepared successfully by the proposed process. First of all, the fabrication process is introduced. Then the prepared uniform wafer-level micro Rubidium vapor cell has been characterized by Energy Dispersive Spectroscopy (EDS) and Ultraviolet spectrophotometer. And the result demonstrates the existing of Rubidium and shows that the SNR (Signal to Noise Ratio) of the micro Rubidium vapor cell is high, which suits for atomic devices as well as other applications. At last, its integration in a Chip-Scale atomic magnetometer is presented.

IEEE Electronic Components and Technology Conference (ECTC)•May 1, 2014•5 citations

Optoelectronic Integration with Improved Sensitivity for Microfabricated Optical Magnetometers

Yu Ji, Jintang Shang, Lei Wu +1 more

Micro-fabricated optical magnetometers as the most sensitive magnetic field sensors play a significant role in a variety of areas ranging from health care and nuclear magnetic resonance to fundamental atomic physics research and remote monitoring. Optoelectronic integration is the main barrier for the performance of the micro-fabricated optical magnetometer. In this study, by using micro alkali vapor cell with spherical structure, a novel optoelectronic integration approach with improved sensitivity for micro-fabricated optical magnetometers has been investigated. Firstly, the manufacturing process of the micro alkali vapor cell with spherical structure is presented. Secondly, the optical path length and the buffer gas pressure of the prepared micro alkali cell have been characterized through one optical frequency-locking system. In the end, optoelectronic integration for the micro-fabricated optical magnetometers has been investigated in this study. Results indicate that the micro alkali cell with spherical structure has a greatly improved optical path length and owns the nitrogen buffer gas at the pressure of 2.25amg. Results also show that by using the micro alkali vapor cell with spherical structure, the novel optoelectronic integration approach has greatly improved signal to noise ratio(S/N) and sensitivity for the micro-fabricated optical magnetometers.

IEEE Electronic Components and Technology Conference (ECTC)•May 1, 2016•0 citations

Integration of Micro-Fabricated Scalar Magnetometer with the Combination of Mx and Mz Techniques

Qi Gan, Jintang Shang, Lei Wu +1 more

The importance of the atomic magnetometer hasalready been widely recognized and it is an emergency to come up with portable atomic magnetometers with highperformance. The scalar magnetometer with its uniqueproperty of merely sensitive to the magnitude but relativelyinsensitive to the direction of the ambient magnetic field. This work presents a novel solution which combines two types of scalar atomic magnetometers, namely the MX magnetometer and the MZ magnetometer. A micro-fabricated rubidium vapor cell, which is the key component in an atomic magnetometer, was integrated in the prototype to enable the reduction of its volume. With a brief review of the theoretical model of scalar atomic magnetometers, the principle is demonstrated. Both thescheme of the magnetometer and the fabrication process of the vapor cell are illustrated. The results of the dispersive signals were measured and are presented. The magnetic field noise spectrum of both the MX and MZ magnetometers are also presented in this work, which shows the sensitivities are in the order of 100pT/Hz1/2.

IEEE Electronic Components and Technology Conference (ECTC)•May 1, 2016•3 citations

Magnetic Gradient Measurement Using Micro-Fabricated Shaped Rubidium Vapor Cell

Yu Ji, Jintang Shang, Jin Zhang +1 more

This paper presents a novel method to measure the magnetic gradient by an Mz atomic magnetometer using a micro-fabricated shaped rubidium vapor cell. The shaped vapor cell is fabricated by a chemical foaming process. Four micro radio frequency (RF) coils are mounted on the shaped rubidium vapor cell. Magnetic fields at the four points corresponding to the RF coils along the laser beam propagation are obtained by measuring Larmor frequency of the rubidium atoms inside the vapor cell. The magnetic gradients are also acquired with the measured magnetic fields. The measurement is performed in a magnetic shield environment. A dc electrical coil is taken to produce an existed magnetic field for the measurement and the theoretical magnetic field distribution is calculated. It is demonstrated that the measured magnetic fields and magnetic gradients correspond well with the calculated ones. Results show that the absolute error of the magnetic field is less than 0.1 μT, the relative error of the magnetic field is below 0.8%, and the relative error of the magnetic gradient is below 5.5%. Results also indicate that the atomic magnetometer has a sensitivity of 5 pT/Hz1/2from 1 to 2 Hz. The Mz atomic magnetometer is potentially useful for applications requiring gradient field information.

IEEE Transactions on Magnetics•May 30, 2019•13 citations

Microfabricated Shaped Rubidium Vapor Cell for Miniaturized Atomic Magnetometers

Yu Ji, Jintang Shang, Guoliang Li +2 more

In this letter, we present a novel microfabricated shaped rubidium vapor cell with 3 cm optical path length for miniaturized atomic magnetometers. The novel shaped rubidium vapor cells are manufactured by a wafer-level fabrication process, and the process consists of the following three steps sequentially: first, wet etching to form oblong shallow cavity arrays; second, anodic bonding, glass reflowing, and wet etching to obtain a glass wafer with shaped structures; third, anodic bonding and chemical reaction to obtain the wafer-level shaped rubidium vapor cells. A miniaturized atomic magnetometer using the novel shaped rubidium vapor cell is characterized in the geomagnetic environment. The performance of the novel shaped rubidium vapor cell is compared with the traditional microfabricated rubidium vapor cell of a “glass–silicon–glass” sandwich structure. Results show that the measured geomagnetic field is 47.85 μT. It is demonstrated that the dispersive signal's slope of the novel shaped rubidium vapor cell is 15 times larger than that of the traditional one. Results also indicate that the miniaturized atomic magnetometer working in the geomagnetic environment has a magnetic noise spectral density of 3.5 pT/Hz1/2from 1 to 2 Hz.

IEEE Sensors Letters•Jan 10, 2020•23 citations

Integration of the SERF Magnetometer and the Mz Magnetometer Using Micro-Fabricated Alkali Vapor Cell

Jin Zhang, Jintang Shang, Guoliang Li +4 more

With the continuous improvement of weak magnetic detection technology, there has been a growing trend towards more compact and integrated magnetometer. The SERF magnetometer and the Mz magnetometer have many common features in operation. Therefore, we design a new kind of miniaturized atomic sensors to integrate the SERF magnetometer and the Mz magnetometer based on micro-fabricated alkali vapor cell. The sensor structure consists of alkali vapor cell, three-axis magnetic field coils, heating module and optical module. This small size sensor has the potential to achieve a portable multi-function device.

IEEE Electronic Components and Technology Conference (ECTC)•May 1, 2018•1 citation
High sensitive atomic magnetometers play an important role in many fields including geophysical mapping, space science, nuclear magnetic resonance, health care and perimeter and remote monitoring. In this study, a novel method to fabricate the micro spherical Rubidium vapor cell has been investigated and the integration of micro spherical rubidium vapor cell in 3-axis atomic magnetometer has been demonstrated successfully. First of all, a fabrication process for micro spherical alkali vapor cells is introduced. Then the prepared uniform wafer-level micro spherical rubidium vapor cell has been characterized by Ultraviolet spectrophotometer as well as a laser frequency locking system. At last, 3-axis atomic magnetometer based on the micro spherical rubidium vapor cell has been demonstrated. Results show that micro spherical rubidium vapor cell has been fabricated successfully. Results also indicate that a 3-axis atomic magnetometer based on the micro spherical rubidium vapor cell could measure magnetic fields along three directions (BX, BYand BZ).
Micro Rubidium vapor cell has very important research values in many fields including atomic magnetometer, atomic clock, atomic gyroscope and so on. In this study, a new method to fabricate the micro Rubidium vapor cell has been investigated and uniform wafer-level micro Rubidium vapor cells, which could be used in atomic devices, have been prepared successfully by the proposed process. First of all, the fabrication process is introduced. Then the prepared uniform wafer-level micro Rubidium vapor cell has been characterized by Energy Dispersive Spectroscopy (EDS) and Ultraviolet spectrophotometer. And the result demonstrates the existing of Rubidium and shows that the SNR (Signal to Noise Ratio) of the micro Rubidium vapor cell is high, which suits for atomic devices as well as other applications. At last, its integration in a Chip-Scale atomic magnetometer is presented.
Micro-fabricated optical magnetometers as the most sensitive magnetic field sensors play a significant role in a variety of areas ranging from health care and nuclear magnetic resonance to fundamental atomic physics research and remote monitoring. Optoelectronic integration is the main barrier for the performance of the micro-fabricated optical magnetometer. In this study, by using micro alkali vapor cell with spherical structure, a novel optoelectronic integration approach with improved sensitivity for micro-fabricated optical magnetometers has been investigated. Firstly, the manufacturing process of the micro alkali vapor cell with spherical structure is presented. Secondly, the optical path length and the buffer gas pressure of the prepared micro alkali cell have been characterized through one optical frequency-locking system. In the end, optoelectronic integration for the micro-fabricated optical magnetometers has been investigated in this study. Results indicate that the micro alkali cell with spherical structure has a greatly improved optical path length and owns the nitrogen buffer gas at the pressure of 2.25amg. Results also show that by using the micro alkali vapor cell with spherical structure, the novel optoelectronic integration approach has greatly improved signal to noise ratio(S/N) and sensitivity for the micro-fabricated optical magnetometers.
The importance of the atomic magnetometer hasalready been widely recognized and it is an emergency to come up with portable atomic magnetometers with highperformance. The scalar magnetometer with its uniqueproperty of merely sensitive to the magnitude but relativelyinsensitive to the direction of the ambient magnetic field. This work presents a novel solution which combines two types of scalar atomic magnetometers, namely the MX magnetometer and the MZ magnetometer. A micro-fabricated rubidium vapor cell, which is the key component in an atomic magnetometer, was integrated in the prototype to enable the reduction of its volume. With a brief review of the theoretical model of scalar atomic magnetometers, the principle is demonstrated. Both thescheme of the magnetometer and the fabrication process of the vapor cell are illustrated. The results of the dispersive signals were measured and are presented. The magnetic field noise spectrum of both the MX and MZ magnetometers are also presented in this work, which shows the sensitivities are in the order of 100pT/Hz1/2.
This paper presents a novel method to measure the magnetic gradient by an Mz atomic magnetometer using a micro-fabricated shaped rubidium vapor cell. The shaped vapor cell is fabricated by a chemical foaming process. Four micro radio frequency (RF) coils are mounted on the shaped rubidium vapor cell. Magnetic fields at the four points corresponding to the RF coils along the laser beam propagation are obtained by measuring Larmor frequency of the rubidium atoms inside the vapor cell. The magnetic gradients are also acquired with the measured magnetic fields. The measurement is performed in a magnetic shield environment. A dc electrical coil is taken to produce an existed magnetic field for the measurement and the theoretical magnetic field distribution is calculated. It is demonstrated that the measured magnetic fields and magnetic gradients correspond well with the calculated ones. Results show that the absolute error of the magnetic field is less than 0.1 μT, the relative error of the magnetic field is below 0.8%, and the relative error of the magnetic gradient is below 5.5%. Results also indicate that the atomic magnetometer has a sensitivity of 5 pT/Hz1/2from 1 to 2 Hz. The Mz atomic magnetometer is potentially useful for applications requiring gradient field information.
In this letter, we present a novel microfabricated shaped rubidium vapor cell with 3 cm optical path length for miniaturized atomic magnetometers. The novel shaped rubidium vapor cells are manufactured by a wafer-level fabrication process, and the process consists of the following three steps sequentially: first, wet etching to form oblong shallow cavity arrays; second, anodic bonding, glass reflowing, and wet etching to obtain a glass wafer with shaped structures; third, anodic bonding and chemical reaction to obtain the wafer-level shaped rubidium vapor cells. A miniaturized atomic magnetometer using the novel shaped rubidium vapor cell is characterized in the geomagnetic environment. The performance of the novel shaped rubidium vapor cell is compared with the traditional microfabricated rubidium vapor cell of a “glass–silicon–glass” sandwich structure. Results show that the measured geomagnetic field is 47.85 μT. It is demonstrated that the dispersive signal's slope of the novel shaped rubidium vapor cell is 15 times larger than that of the traditional one. Results also indicate that the miniaturized atomic magnetometer working in the geomagnetic environment has a magnetic noise spectral density of 3.5 pT/Hz1/2from 1 to 2 Hz.
With the continuous improvement of weak magnetic detection technology, there has been a growing trend towards more compact and integrated magnetometer. The SERF magnetometer and the Mz magnetometer have many common features in operation. Therefore, we design a new kind of miniaturized atomic sensors to integrate the SERF magnetometer and the Mz magnetometer based on micro-fabricated alkali vapor cell. The sensor structure consists of alkali vapor cell, three-axis magnetic field coils, heating module and optical module. This small size sensor has the potential to achieve a portable multi-function device.