Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Recent advances in superconducting-mixer simulations

S. Withington, Philippa R Kennedy

Published Jan 1, 1992• 0 citations
OpenAlex

Abstract

Over the last few years, considerable progress have been made in the development of techniques for fabricating high-quality superconducting circuits, and this success, together with major advances in the theoretical understanding of quantum detection and mixing at millimeter and submillimeter wavelengths, has made the development of CAD techniques for superconducting nonlinear circuits an important new enterprise. For example, arrays of quasioptical mixers are now being manufactured, where the antennas, matching networks, filters and superconducting tunnel junctions are all fabricated by depositing niobium and a variety of oxides on a single quartz substrate. There are no adjustable tuning elements on these integrated circuits, and therefore, one must be able to predict their electrical behavior precisely. This requirement, together with a general interest in the generic behavior of devices such as direct detectors and harmonic mixers, has lead us to develop a range of CAD tools for simulating the large-signal, small-signal, and noise behavior of superconducting tunnel junction circuits.

Related papers

CAD techniques for superconducting millimetre and submillimetre-wave circuits

S. Withington

Over the last few years, considerable progress has been made in the development of techniques for fabricating high-quality superconducting circuits, and this success, together with major advances in the theoretical understanding of quantum detection and mixing at millimetre and submillimetre wavelengths, has made the production of CAD tools for superconducting nonlinear circuits an important new enterprise. A further motivation for modelling the behaviour of superconducting nonlinear circuits is that there is a range of circuits whose characteristics have not been studied in any detail. To model the behaviour of a quasiparticle mixer, it is first necessary to simulate the large-signal steady-state dynamics of the local-oscillator circuit. Once the large-signal operating point is known, it is then possible to perturb, either numerically or analytically, the underlying system of equations to gain information about the linear relationships between signal and noise variables. Clearly, if the simulator is to support advanced CAD facilities such as optimization, then it must be capable of calculating the large-signal behaviour of superconducting tunnel junctions efficiently.

•Oct 15, 1991•0 citations

Nonlinear modelling of superconducting devices and circuits

S. Withington, Philippa R Kennedy

Recent progress in the development of techniques for fabricating high-quality superconducting components, together with major advances in the theoretical understanding of quantum detection and mixing at millimetre and submillimetre wavelengths, have made the development of CAD tools for superconducting nonlinear circuits an important and exciting challenge. As a first step towards developing general purpose CAD techniques, the authors have devised algorithms, and written, in the C programming language, modular software for analysing the large-signal, small-signal and noise behaviour of quasiparticle tunnel-junction circuits. At present, they are using the software to study the complex behaviour of SIS mixers, however, the software can also be used for studying other modes of operation, and other tunnelling structures for which macroscopic quantum effects are important. >

•Jun 25, 1990•1 citation

CAD of Superconducting Nonlinear Circuits

S. Withington, P. R. Ke

The paper summarises preliminary work on the development of a general-purpose superconducting nonlinear-circuit simulator. After contrasting, from a CAD perspective, time and frequency domain descriptions of the macroscopic quantum behaviour of superconducting tunnel junctions, it is reported that the large-signal steady-state dynamics of a tunnel-junction circuit can be conmpletely decomposed by using the method of harmonic balance, and that the resulting system of coupled nonlinear algebraic equations can be solved through harmonic Newton. The principle is illustrated by briefly mentioning an analysis of inadvertent harmonic pumping in quasiparticle mixers.

European Microwave Conference (EuMC)•Oct 1, 1990•0 citations

An overview of superconducting nonlinear-circuit simulation

S. Withington, Philippa R Kennedy

To assist the development of superconducting millimetre and submillimetre-wave receivers, the authors have devised algorithms and written in the C programming language modular software for analysing the small-signal, large-signal and noise behaviour of SIS tunnel-junction circuits. Typical applications include the modelling of mixers, subharmonic mixers and direct detectors. To analyse the complex behaviour of a nonlinear SIS tunnel-junction circuit, it is first necessary to model the large-signal steady-state dynamics of the circuit; the underlying system of equations can then be perturbed, either numerically or analytically, to gain information about the linear relationships between signal and noise variables. A general-purpose simulator must therefore be capable of solving large systems of coupled nonlinear equations. >

•Oct 24, 1989•0 citations

Superconducting detectors and mixers for millimeter and submillimeter astrophysics

Jonas Stasys Zmuidzinas, P. L. Richards

Superconducting detectors will play an increasingly significant role in astrophysics, especially at millimeter through far-IR wavelengths, where the scientific opportunities include key problems in astronomy and cosmology. Superconducting detectors offer many benefits: outstanding sensitivity, lithographic fabrication, and large array sizes, especially through the recent development of multiplexing techniques. This paper describes the scientific opportunities, the basic physics of these devices, the techniques for radiation coupling, and reviews the recent progress in direct detectors, such as transition-edge bolometers, and the work on tunnel junction (superconductor-insulator-superconductor) and hot-electron mixers.

Proceedings of the IEEE•Sep 20, 2004•301 citations

Superconducting devices for millimeter and submillimeter wavelengths

P. L. Richards

Josephson junctions are highly nonlinear and respond up to infrared frequencies. A wide variety of high frequency applications have been explored. In addition, several high frequency superconducting devices are being developed which do not use the Josephson effect. These include a superconducting version of the Schottky barrier diode for use as a heterodyne mixer and a video detector, and also a composite superconducting bolometer. In this review, the state of development of superconducting mixers, detectors, and parametric amplifiers at microwave, millimeter, and submillimeter wavelengths is discussed. Emphasis will be placed on developments which have taken place since 1974 when a previous review was circulated.

De Gruyter eBooks•Dec 31, 1977•7 citations
Over the last few years, considerable progress have been made in the development of techniques for fabricating high-quality superconducting circuits, and this success, together with major advances in the theoretical understanding of quantum detection and mixing at millimeter and submillimeter wavelengths, has made the development of CAD techniques for superconducting nonlinear circuits an important new enterprise. For example, arrays of quasioptical mixers are now being manufactured, where the antennas, matching networks, filters and superconducting tunnel junctions are all fabricated by depositing niobium and a variety of oxides on a single quartz substrate. There are no adjustable tuning elements on these integrated circuits, and therefore, one must be able to predict their electrical behavior precisely. This requirement, together with a general interest in the generic behavior of devices such as direct detectors and harmonic mixers, has lead us to develop a range of CAD tools for simulating the large-signal, small-signal, and noise behavior of superconducting tunnel junction circuits.
Over the last few years, considerable progress has been made in the development of techniques for fabricating high-quality superconducting circuits, and this success, together with major advances in the theoretical understanding of quantum detection and mixing at millimetre and submillimetre wavelengths, has made the production of CAD tools for superconducting nonlinear circuits an important new enterprise. A further motivation for modelling the behaviour of superconducting nonlinear circuits is that there is a range of circuits whose characteristics have not been studied in any detail. To model the behaviour of a quasiparticle mixer, it is first necessary to simulate the large-signal steady-state dynamics of the local-oscillator circuit. Once the large-signal operating point is known, it is then possible to perturb, either numerically or analytically, the underlying system of equations to gain information about the linear relationships between signal and noise variables. Clearly, if the simulator is to support advanced CAD facilities such as optimization, then it must be capable of calculating the large-signal behaviour of superconducting tunnel junctions efficiently.
Recent progress in the development of techniques for fabricating high-quality superconducting components, together with major advances in the theoretical understanding of quantum detection and mixing at millimetre and submillimetre wavelengths, have made the development of CAD tools for superconducting nonlinear circuits an important and exciting challenge. As a first step towards developing general purpose CAD techniques, the authors have devised algorithms, and written, in the C programming language, modular software for analysing the large-signal, small-signal and noise behaviour of quasiparticle tunnel-junction circuits. At present, they are using the software to study the complex behaviour of SIS mixers, however, the software can also be used for studying other modes of operation, and other tunnelling structures for which macroscopic quantum effects are important. >
The paper summarises preliminary work on the development of a general-purpose superconducting nonlinear-circuit simulator. After contrasting, from a CAD perspective, time and frequency domain descriptions of the macroscopic quantum behaviour of superconducting tunnel junctions, it is reported that the large-signal steady-state dynamics of a tunnel-junction circuit can be conmpletely decomposed by using the method of harmonic balance, and that the resulting system of coupled nonlinear algebraic equations can be solved through harmonic Newton. The principle is illustrated by briefly mentioning an analysis of inadvertent harmonic pumping in quasiparticle mixers.
To assist the development of superconducting millimetre and submillimetre-wave receivers, the authors have devised algorithms and written in the C programming language modular software for analysing the small-signal, large-signal and noise behaviour of SIS tunnel-junction circuits. Typical applications include the modelling of mixers, subharmonic mixers and direct detectors. To analyse the complex behaviour of a nonlinear SIS tunnel-junction circuit, it is first necessary to model the large-signal steady-state dynamics of the circuit; the underlying system of equations can then be perturbed, either numerically or analytically, to gain information about the linear relationships between signal and noise variables. A general-purpose simulator must therefore be capable of solving large systems of coupled nonlinear equations. >
Superconducting detectors will play an increasingly significant role in astrophysics, especially at millimeter through far-IR wavelengths, where the scientific opportunities include key problems in astronomy and cosmology. Superconducting detectors offer many benefits: outstanding sensitivity, lithographic fabrication, and large array sizes, especially through the recent development of multiplexing techniques. This paper describes the scientific opportunities, the basic physics of these devices, the techniques for radiation coupling, and reviews the recent progress in direct detectors, such as transition-edge bolometers, and the work on tunnel junction (superconductor-insulator-superconductor) and hot-electron mixers.
Josephson junctions are highly nonlinear and respond up to infrared frequencies. A wide variety of high frequency applications have been explored. In addition, several high frequency superconducting devices are being developed which do not use the Josephson effect. These include a superconducting version of the Schottky barrier diode for use as a heterodyne mixer and a video detector, and also a composite superconducting bolometer. In this review, the state of development of superconducting mixers, detectors, and parametric amplifiers at microwave, millimeter, and submillimeter wavelengths is discussed. Emphasis will be placed on developments which have taken place since 1974 when a previous review was circulated.