Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cambridge University Press eBooks

Equilibrium critical phenomena

Uwe Claus Täuber

Published Mar 6, 2014• 1 citation
Publisher

Abstract

To set the stage for our subsequent thorough discussion of dynamic critical phenomena, we first review the theoretical description of second-order equilibrium phase transitions. (Readers already well acquainted with this material may readily move on to Chapter 2.) To this end, we compare the critical exponents following from the van-der-Waals equation of state for weakly interacting gases with the results from the Curie–Weiss mean-field approximation for the ferromagnetic Ising model. We then provide a unifying description in terms of Landau–Ginzburg theory, i.e., a long-wavelength expansion of the effective free energy with respect to the order parameter. The Gaussian model is analyzed, and a quantitative criterion is established that defines the circumstances when non-linear fluctuations need to be taken into account properly. Thereby we identify d c = 4 as the upper critical dimension for generic continuous phase transitions in thermal equilibrium. The most characteristic feature of a critical point turns out to be the divergence of the correlation length that renders microscopic details oblivious. As a consequence, not only the correlation functions, but remarkably the thermodynamics as well of a critical system are governed by an emergent unusual symmetry: scale invariance. A simple scaling ansatz is capable of linking different critical exponents; as an application, we introduce the basic elements of finite-size scaling. Finally, a brief sketch of Wilson's momentum shell renormalization group method is presented, intended as a pedagogical preview of the fundamental RG ideas. Exploiting the scale invariance properties at the critical point, the scaling forms of the free energy and the order parameter correlation function are derived.

DOI
10.1017/cbo9781139046213.003

Related papers

Introduction to critical phenomena

Michel Le Bellac, G. Barton

Abstract This first chapter is an elementary introduction to the models and methods that will be used later. The ferromagnetic (Curie) transition serves as our prototype for all second-order phase transitions, and serves also to introduce the notions of broken symmetry and of order parameter. The basic model of ferromagnetism, namely the Ising model, is described in Section 1.2, and solved for an elementary case. The reason why this model is so important is that it has an exact solution in two dimensions, which exhibits spontaneous magnetization. Section 1.3 is devoted to a first approach to mean-field methods, which remain amongst the most frequently exploited approximations even today. They will lead us to define a first set of critical exponents; the listing of such exponents will then be completed in Section 1.4, once correlation functions have been defined. Finally, in Section 1.5 a qualitative description of critical phenomena will enable us, in a first approximation, to define the concept of scale invariance and its relation to the behaviour of the theory under dilatations.

Oxford University Press eBooks•Mar 26, 1992•5 citations

Phase Transitions and Critical Phenomena: Renormalisation Group Method

Deepak Kumar

These lectures describe the physics of phase transitions and critical phenomena. After introducing the thermodynamics of phase transitions, these general considerations are made explicit by presenting statistical mechanical calculations on a lattice gas model in the mean-field approximation. Then the Landau theory of phase transitions is presented. The form of free energy in the Landau theory is motivated by an explicit mean field calculation for the Ising model. This is followed by a discussion of spatial correlations and the breakdown of the mean field theory due to increase of spatial fluctuations near the critical point. This calculation also brings out the role of dimension of the system for the critical behaviour. The basic ideas of Renormalization Group (RG) are then introduced and illustrated by a simple RG calculation for the one-dimensional Ising model. Real-space RG calculations are then applied to the two-dimensional Ising model on the triangular lattice, which, in fact, brings forth several key features of the RG technique. A discussion of more general aspects of the RG formalism, such as scaling for spatial correlation functions, relevant and irrelevant couplings, universality, upper critical dimension, etc. are introduced.

Texts and readings in physical sciences•Jan 1, 2001•0 citations

Critical Phenomena: Universality, Scaling, and Renormalization Group

Biman Bagchi

Overview As discussed in Chapter 16 , when we approach the critical temperature of a phase coexistence line, several fascinating things start to happen which together have come to be known as “critical phenomena.” It is observed that the spatial correlation between relevant order parameters like density, magnetization, etc. becomes infinitely large. This is reflected in the divergence of inverse susceptibility of the respective order parameters. Landau’s theory explains this in terms of the flattening of the free energy surface but fails to unravel many of the other mysteries of critical phenomena that have kept scientists engaged now for about a century. Critical phenomena are characterized by certain singular properties, like the universality of the critical exponents. Several aspects of the critical phenomena are discussed in this chapter with an aim to maintain continuity with earlier chapters. A simple theory (like that of Landau) cannot explain many of the observed features and this problem remained unsolved for a long time until K. G. Wilson could develop a sophisticated theory that explained almost everything. At the core of Wilson’s method is the renormalization group technique. Physically, this technique employs the expected invariance of the Hamiltonian due to a transformation that removes local interactions and replaces them by effective longer range interactions. Because of the existence of long range correlations, the transformation is expected to converge to a fixed point. The procedure is quite mathematical and is the only robust method to obtain the critical exponents. Here we discuss the method briefly, as an introduction to the subject.

CRC Press eBooks•Jul 6, 2018•0 citations

Dynamic scaling

Uwe Claus Täuber

In the preceding chapter, we have introduced several levels for the mathematical description of stochastic dynamics. We now use the kinetic Ising models introduced in Section 2.3.3 to formulate the dynamic scaling hypothesis which appropriately generalizes the homogeneity property of the static correlation function in the vicinity of a critical point, as established in Chapter 1. The dynamic critical exponent z is defined to characterize both the critical dispersion and the basic phenomenon of critical slowing-down. As a next step, and building on the results of Section 2.4, a continuum effective theory for the mesoscopic order parameter density, basically the dynamical analog to the Ginzburg–Landau approach, is constructed in terms of a non-linear Langevin equation. The distinction between dissipative and diffusive dynamics for the purely relaxational kinetics of either a non-conserved or conserved order parameter field, respectively, defines the universality classes A and B. Following the analysis of these models in the Gaussian approximation, they also serve to outline the construction of a dynamical perturbation theory for non-linear stochastic differential equations through direct iteration. In general, however, the order parameter alone does not suffice to fully capture the critical dynamics near a second-order phase transition. Additional hydrodynamic modes originating from conservation laws need to be accounted for as well. The simplest such situation is entailed in the relaxational models C and D, which encompass the static coupling of the order parameter to the energy density. Further scenarios emerge through reversible non-linear mode couplings in the Langevin equations of motion.

Cambridge University Press eBooks•Mar 6, 2014•0 citations

Phase Transitions, Critical Phenomena, and Finite-Size Scaling

Hans-Peter Eckle

Abstract Interacting many-particle systems may undergo phase transitions and exhibit critical phenomena in the limit of infinite system size, while the precursors of these phenomena are studied in the theory of finite-size scaling. After surveying the basic notions of phases, phase diagrams, and phase transitions, this chapter focuses on critical behaviour at a second-order phase transition. The Landau-Ginzburg theory and the concept of scaling prepare readers for an elementary introduction to the concepts of the renormalization group, followed by an introduction into the field of quantum phase transitions where quantum fluctuations take over the role of thermal fluctuations.

Oxford University Press eBooks•Jul 25, 2019•0 citations

Introduction to phase transitions

Antoni Planes, Avadh Saxena

The chapter is an introduction to basic equilibrium aspects of phase transitions. It starts by reviewing thermodynamics and the thermodynamic description of phase transitions. Next, lattice models, such as the paradigmatic Ising model, are introduced as simple physical models that permit a mechano-statistical study of phase transitions from a more microscopic point of view. It is shown that the Ising model can quite faithfully describe many different systems after suitable interpretation of the lattice variables. Special emphasis is placed on the mean-field concept and the mean-field approximations. The deformable Ising model is then studied as an example that illustrates the interplay of different degrees of freedom. Subsequently, the Landau theory of phase transitions is introduced for continuous and first-order transitions, as well as critical and tricritical behaviour are analysed. Finally, scaling theories and the notion of universality within the framework of the renormalization group are briefly discussed.

Cambridge University Press eBooks•Apr 30, 2025•0 citations
To set the stage for our subsequent thorough discussion of dynamic critical phenomena, we first review the theoretical description of second-order equilibrium phase transitions. (Readers already well acquainted with this material may readily move on to Chapter 2.) To this end, we compare the critical exponents following from the van-der-Waals equation of state for weakly interacting gases with the results from the Curie–Weiss mean-field approximation for the ferromagnetic Ising model. We then provide a unifying description in terms of Landau–Ginzburg theory, i.e., a long-wavelength expansion of the effective free energy with respect to the order parameter. The Gaussian model is analyzed, and a quantitative criterion is established that defines the circumstances when non-linear fluctuations need to be taken into account properly. Thereby we identify d c = 4 as the upper critical dimension for generic continuous phase transitions in thermal equilibrium. The most characteristic feature of a critical point turns out to be the divergence of the correlation length that renders microscopic details oblivious. As a consequence, not only the correlation functions, but remarkably the thermodynamics as well of a critical system are governed by an emergent unusual symmetry: scale invariance. A simple scaling ansatz is capable of linking different critical exponents; as an application, we introduce the basic elements of finite-size scaling. Finally, a brief sketch of Wilson's momentum shell renormalization group method is presented, intended as a pedagogical preview of the fundamental RG ideas. Exploiting the scale invariance properties at the critical point, the scaling forms of the free energy and the order parameter correlation function are derived.
Abstract This first chapter is an elementary introduction to the models and methods that will be used later. The ferromagnetic (Curie) transition serves as our prototype for all second-order phase transitions, and serves also to introduce the notions of broken symmetry and of order parameter. The basic model of ferromagnetism, namely the Ising model, is described in Section 1.2, and solved for an elementary case. The reason why this model is so important is that it has an exact solution in two dimensions, which exhibits spontaneous magnetization. Section 1.3 is devoted to a first approach to mean-field methods, which remain amongst the most frequently exploited approximations even today. They will lead us to define a first set of critical exponents; the listing of such exponents will then be completed in Section 1.4, once correlation functions have been defined. Finally, in Section 1.5 a qualitative description of critical phenomena will enable us, in a first approximation, to define the concept of scale invariance and its relation to the behaviour of the theory under dilatations.
These lectures describe the physics of phase transitions and critical phenomena. After introducing the thermodynamics of phase transitions, these general considerations are made explicit by presenting statistical mechanical calculations on a lattice gas model in the mean-field approximation. Then the Landau theory of phase transitions is presented. The form of free energy in the Landau theory is motivated by an explicit mean field calculation for the Ising model. This is followed by a discussion of spatial correlations and the breakdown of the mean field theory due to increase of spatial fluctuations near the critical point. This calculation also brings out the role of dimension of the system for the critical behaviour. The basic ideas of Renormalization Group (RG) are then introduced and illustrated by a simple RG calculation for the one-dimensional Ising model. Real-space RG calculations are then applied to the two-dimensional Ising model on the triangular lattice, which, in fact, brings forth several key features of the RG technique. A discussion of more general aspects of the RG formalism, such as scaling for spatial correlation functions, relevant and irrelevant couplings, universality, upper critical dimension, etc. are introduced.
Overview As discussed in Chapter 16 , when we approach the critical temperature of a phase coexistence line, several fascinating things start to happen which together have come to be known as “critical phenomena.” It is observed that the spatial correlation between relevant order parameters like density, magnetization, etc. becomes infinitely large. This is reflected in the divergence of inverse susceptibility of the respective order parameters. Landau’s theory explains this in terms of the flattening of the free energy surface but fails to unravel many of the other mysteries of critical phenomena that have kept scientists engaged now for about a century. Critical phenomena are characterized by certain singular properties, like the universality of the critical exponents. Several aspects of the critical phenomena are discussed in this chapter with an aim to maintain continuity with earlier chapters. A simple theory (like that of Landau) cannot explain many of the observed features and this problem remained unsolved for a long time until K. G. Wilson could develop a sophisticated theory that explained almost everything. At the core of Wilson’s method is the renormalization group technique. Physically, this technique employs the expected invariance of the Hamiltonian due to a transformation that removes local interactions and replaces them by effective longer range interactions. Because of the existence of long range correlations, the transformation is expected to converge to a fixed point. The procedure is quite mathematical and is the only robust method to obtain the critical exponents. Here we discuss the method briefly, as an introduction to the subject.
In the preceding chapter, we have introduced several levels for the mathematical description of stochastic dynamics. We now use the kinetic Ising models introduced in Section 2.3.3 to formulate the dynamic scaling hypothesis which appropriately generalizes the homogeneity property of the static correlation function in the vicinity of a critical point, as established in Chapter 1. The dynamic critical exponent z is defined to characterize both the critical dispersion and the basic phenomenon of critical slowing-down. As a next step, and building on the results of Section 2.4, a continuum effective theory for the mesoscopic order parameter density, basically the dynamical analog to the Ginzburg–Landau approach, is constructed in terms of a non-linear Langevin equation. The distinction between dissipative and diffusive dynamics for the purely relaxational kinetics of either a non-conserved or conserved order parameter field, respectively, defines the universality classes A and B. Following the analysis of these models in the Gaussian approximation, they also serve to outline the construction of a dynamical perturbation theory for non-linear stochastic differential equations through direct iteration. In general, however, the order parameter alone does not suffice to fully capture the critical dynamics near a second-order phase transition. Additional hydrodynamic modes originating from conservation laws need to be accounted for as well. The simplest such situation is entailed in the relaxational models C and D, which encompass the static coupling of the order parameter to the energy density. Further scenarios emerge through reversible non-linear mode couplings in the Langevin equations of motion.
Abstract Interacting many-particle systems may undergo phase transitions and exhibit critical phenomena in the limit of infinite system size, while the precursors of these phenomena are studied in the theory of finite-size scaling. After surveying the basic notions of phases, phase diagrams, and phase transitions, this chapter focuses on critical behaviour at a second-order phase transition. The Landau-Ginzburg theory and the concept of scaling prepare readers for an elementary introduction to the concepts of the renormalization group, followed by an introduction into the field of quantum phase transitions where quantum fluctuations take over the role of thermal fluctuations.
The chapter is an introduction to basic equilibrium aspects of phase transitions. It starts by reviewing thermodynamics and the thermodynamic description of phase transitions. Next, lattice models, such as the paradigmatic Ising model, are introduced as simple physical models that permit a mechano-statistical study of phase transitions from a more microscopic point of view. It is shown that the Ising model can quite faithfully describe many different systems after suitable interpretation of the lattice variables. Special emphasis is placed on the mean-field concept and the mean-field approximations. The deformable Ising model is then studied as an example that illustrates the interplay of different degrees of freedom. Subsequently, the Landau theory of phase transitions is introduced for continuous and first-order transitions, as well as critical and tricritical behaviour are analysed. Finally, scaling theories and the notion of universality within the framework of the renormalization group are briefly discussed.