Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optical Gas-Phase Frequency References Based on Photonic Crystal Technology : Impact of Slow Light on Molecular Absorption

Isabelle Dicaire

Published Dec 8, 2011• 0 citations
Publisher

Abstract

Optical frequency references are devices providing well-defined and stable optical frequency responses to incoming radiation for applications such as high-precision spectroscopy and optical fibre communications. To stabilise the emission frequency of lasers, which drifts with time mostly because of fluctuations in temperature and mechanical vibrations, atomic and molecular optical transitions can be used since they show precise and well-defined frequency responses to incoming radiation. However from a practical standpoint conventional gas cell devices cannot be easily integrated into existing optical systems because of their bulky dimensions. To replace conventional absorption cells, photonic crystal fibres filled with gas-phase material are promising devices owing to their robustness, reliability, and portable characteristics. In addition they can be directly embedded into existing optical systems and they perform well in harsh environments. In this experimental study, optical gas-phase frequency references based on photonic crystal technology are realised. The gas-sensing properties of different photonic crystal fibre samples are studied and the long-term stability and reliability of fibre gas cells are demonstrated. In addition an analytical model predicting the gas-filling time in photonic crystal fibres (PCF) is developed and can be applied to any type of fibre, fibre geometry, or length. Then fibre gas cells filled with acetylene gas, a recognised frequency reference gas-phase material, have been prepared to conduct fundamental research on slow & fast light generation in optical fibres to verify the possibilities of slow light in enhancing light-matter interaction. The group velocity of light is controlled by modifying the material and structural dispersive properties of the PCF absorption cells through stimulated Brillouin scattering and cavity ring resonators, respectively. We could demonstrate that material slow light has no impact on the molecular absorption effect whereas structural slow light has an impact on the absorption efficiency scaling linearly with the group index. Such radically different responses to slow light suggest that group velocity is not the universal physical quantity scaling light-matter interaction, and that the optical absorption of molecules is more closely related to the velocity of the electromagnetic energy. Finally the impact of slow light on the molecular absorption efficiency is also evaluated in dispersion-engineered photonic crystal waveguides. We demonstrate that in planar photonic crystal waveguides the field enhancement and its evanescent fraction have more impact on the absorption efficiency than the reduction of the group velocity of light.

DOI
10.5075/epfl-thesis-5267

Related papers

Probing molecular absorption under slow-light propagation using a photonic crystal waveguide

Isabelle Dicaire, Alfredo De Rossi, Sylvain Combrié +1 more

High-resolution infrared absorption spectroscopy of acetylene gas is demonstrated in a dispersion-engineered photonic crystal waveguide under slow-light propagation. Experimental enhancement factors of 0.31 and 1.00 are obtained for TE and TM polarization, respectively, for group indices ranging from 1.5 to 6.7. The dependence of molecular absorption on the evanescent electric-field distribution and on the group index under structural slow-light illumination is experimentally demonstrated and confirmed by time-domain simulations.

Optics Letters•Nov 28, 2012•28 citations

Experimental verification of the effect of slow light on molecular absorption

Luc Thévenaz, Sanghoon Chin, Isabelle Dicaire +3 more

The absorption of light by a gas molecule has been measured comparatively using light propagating in normal conditions and in a slow light regime. The experiment is designed to make the 2 measurements possible without modifying the interaction conditions, so that the sole effect of slow light is unambiguously observed. A 26% group velocity reduction induced by stimulated Brillouin scattering in a gas-filled microstructured fiber caused no observable change in the measured absorption, so that it is proved that material slow light does not enhance Beer-Lambert absorption and has a null impact on gas sensing or spectroscopic applications.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Aug 5, 2009•4 citations

Photonic microcells for quantum optics applications

P. S. Light

This thesis presents the development of photonic microcells for use as the host for coherent optics phenomena and related applications. A photonic microcell consists of a length of hollow-core photonic crystal fibre (HC-PCF) with a gas-filled core that is spliced to conventional optical fibre at either end to seal the gas within the fibre. Towards the goal of demonstrating and assessing the coherence properties of quantum optical effects in photonic microcells, the fabrication of two types of HC-PCF is presented. The established photonic bandgap HC-PCF offers extremely low transmission loss of ~10 dB/km over kilometre distances. However, the fibre has a limited transmission bandwidth of ~50 THz and exhibits modal coupling unfavourable for many applications. Work is presented on the tailoring of this fibre by control and shaping of the core-surround in order to improve its modal properties. A second type of HC-PCF is based on a large-pitch lattice, whose guidance relies on a new mechanism. This fibre exhibits a much improved bandwidth (>1000 THz) and has a relatively higher but still practical loss of ~1 dB/m. The development of photonic microcells at microbar pressure level and with low optical insertion loss is shown, an important step in the improvement of the technology for coherent optics applications which will take advantage of the extreme gas-laser interaction efficiency achieved in HC-PCF. Finally, quantum optical effects are demonstrated in HC-PCF and photonic microcells loaded with both the molecular gas acetylene and atomic vapour rubidium. The observation of electromagnetically induced transparency (EIT) in acetylene-filled HC-PCF represents the first such observation in a molecular gas, while the use of a photonic microcell allows a comparison of many experimental configurations to explore the coherence properties of coherent optical systems in the core of a HC-PCF. Furthermore, EIT is observed unambiguously in a rubidium loaded HC-PCF for the first time, and the anti-relaxation effects of a polymer coating demonstrated in this configuration.

•May 1, 2008•4 citations

Slow Light in Optical Fibers

Shanglin Hou, Wei Qiu

The group velocity at which light pulses propagate through a dispersive material system is very different from the vacuum speed of light c, One refers to light as being "slow" for v g << c (Boyd & Gauthier, 2009) or "fast" for v g > c or v g <0 (Stenner et al, 2003 ).For v g <0, the pulse envelope appears to travel backward in the material (Gehring et al, 2006), and hence it is sometimes referred to as "backward light."The subject of slow light has caused keen interest in the past decade or more, and it is possible to control the group velocity of light pulses in the dispersive materials.Interest in slow and fast light dates back to the early days of the 20th century.Sommerfeld and Brillouin (Sommerfeld & Brillouin, 1960) were intrigued by the fact that theory predicts that v g can exceed c, which leads to apparent inconsistencies with Einstein's special theory of relativity.Experimental investigations of extreme propagation velocities were performed soon after the invention of the laser (Faxvog and et al, 1970).In 1999, Harris's group research work greatly stimulated researchers' interests, which showed that light could be slowed down to 17m/s.The result was obtained in ultra cold atom clouds with the use of electromagnetically induced transparency (EIT), which induces transparency in a material while allowing it to retain strong linear and nonlinear optical properties (Hau et al, 1999).Slow light can also be obtained through the use of the optical response of hot atomic vapors (Philips et al, 2001).These early research works require hard conditions and the slow light cannot operate in room temperature.Recently, researchers found ways to realize slow light operating in room temperature and solid-state materials, which are more suited for many practical applications, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.In this chapter, we describe some of the physical mechanisms that can be used to induce slow and fast light effects in room-temperature solids (Bigelow et al, 2003) and some of the exotic propagation effects that can thereby be observed.We also survey some applications of slow and fast light within the fields of quantum electronics and photonics. Fundamentals of slow and fast lightSlow and fast light refer to the group velocity of a light wave.The group velocity is the velocity most closely related to the velocity at which the peak of a light pulse moves through an optical dispersive material (Milonni, 2005), and is given by the standard result www.intechopen.comRecent Progress in Optical Fiber Research 82where n is the refractive (phase) index and ω is the angular frequency of the carrier wave of the light field.One refers to light as being slow light for v g << c, fast light for for v g > c, and backwards light for v g <0 or v g is negative.Extreme values of the group velocity invariably rely on the dominance of the second contribution to the group index of Equation ( 1).This contribution of course results from the frequency dependence of the refractive index, and for this reason extreme values of the group velocity are usually associated with the resonant or near-resonant response of material systems.According to this theory, slow light is expected in the wings of an absorption line and fast light is expected near line center, and the spatial dispersion, that is, the non-locality in space of the medium response, is another mechanism that can lead to slow light, as has been predicted (Kocharovskaya et al,2001) and observed (Strekalov et al, 2001).We catalogue the main methods to realize slow light in room temperature solid, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.We will describe CPO and SBS slow light in more details.

InTech eBooks•Jan 25, 2012•0 citations

Compact and versatile caesium thermal photonic-cells based on microstructured hollow core fibres for frequency and time references

Marcelo Botelho Alonso

The recent developments in fabrication of hollow core Photonic crystal fibres (HC-PCFs), especially Anti-resonant fibres (ARFs), made this class of fibre very attractive for gas-phase applications, which ultimately led to the concept of photonic reference cell. This device is a fully-connectorised, stand-alone, HC-PCF filled with a gas specimen. Its application spans from instrument calibration, quantum optics to high-resolution spectroscopy and metrology. For time and frequency applications, the use of alkali metals with narrow atomic features (in the kHz range) is a requirement for ultra-stable reference signals. However, the coherence time of atoms is strongly dependent on the vapour dynamics and photonic cell geometry. This dependency limits the use of alkali vapour in miniaturised reference cells, such as photonic cells, because of the short coherence time that leads to atomic features in the MHz range, for reference cells with cross-section of 100 μm, operating at room temperature. The diffusion of the vapour can be tailored by adding a mixture of inert gas (buffer gas), with resulting atomic features between kHz and sub-kHz range. This is a very well-known method widely used in standard reference cells. This thesis reports on the advances in HC-PCFs technology for time and frequency reference applications. Firstly, I present a method to interconnect solid core fibres and HC-PCFs with dissimilar core sizes by employing a mode field adapter (MFA) to mediate the joint. I model and demonstrate the use of such MFAs for a photonic cell, fully-connectorised to SMFs. Secondly, I demonstrate for the first time spectroscopy of coherent population trapping (CPT) dark resonance in Kagome-lattice ARFs filled with Cs. CPT is a quantum effect very useful in frequency reference applications as it can provide an indirect measurement of the Cs clock transition (~9.2 GHz). I model and demonstrate world record line-width narrowing of CPT dark resonance in HC-PCFs and micro-metre scale capillaries filled with thermal Cs-vapour, with experimental observation of line-widths below 50 kHz for a Kagome-lattice ARF with a hollow core diameter of 125 μm.

•Jan 1, 2019•0 citations

Molecular and atomic confinement in large core photonic microcells for slow light and laser metrology applications

Natalie V. Wheeler

This thesis describes developments in the fabrication and applications of photonic microcells (PMCs). A PMC is a length of gas-filled hollow core-photonic crystal fibre (HC-PCF) that is hermetically sealed by splicing both ends to standard single mode fibre. A PMC enables integration of gas-filled HC-PCF into all-fibre systems with low insertion loss. PMCs have applications in coherent optics and metrology, where specific HC-PCF designs are advantageous. Two types of state-of-the-art HC-PCF, double bandgap HCPCF and large-pitch Kagome fibre, are fabricated. The double bandgap HC-PCF extends the usable bandwidth of the fibre by providing low loss guidance across two transmission bands. The large-pitch Kagome HC-PCF has a record low attenuation of 0.3 dB/m at 800 nm, while maintaining broadband guidance, which is partially attributed to the core shape. Three distinct developments in the field of PMCs are described. Firstly, a record length 20 metre acetylene-filled PMC is fabricated which is the key component in the first demonstration of an all-fibre slow and fast light system based on electromagnetically induced transparency. Secondly, a technique based on fibre tapering is presented which enables low loss integration of large core Kagome HC-PCFs into PMC form. Thirdly, micromirrors are developed and integrated with HC-PCF to confine light in the longitudinal dimension, providing a means to fabricate multi-pass PMCs. Two uncoated micromirrors are used to form a low finesse microcavity in Kagome HC-PCF, with record high fringe visibility using reflections from a silica/air junction. In collaboration with Kansas State University, an acetylene optical reference with sub-10 KHz accuracy and the first acetylene laser based on population inversion are demonstrated using Kagome HC-PCF.Finally, this thesis reports on rubidium vapour loading in HC-PCF with the ultimate aim being the production of a rubidium-filled PMC for applications in metrology. Preliminary results highlight the limited loading distance of the current technique and modified loading schemes are outlined accordingly.

•Nov 1, 2010•0 citations
Optical frequency references are devices providing well-defined and stable optical frequency responses to incoming radiation for applications such as high-precision spectroscopy and optical fibre communications. To stabilise the emission frequency of lasers, which drifts with time mostly because of fluctuations in temperature and mechanical vibrations, atomic and molecular optical transitions can be used since they show precise and well-defined frequency responses to incoming radiation. However from a practical standpoint conventional gas cell devices cannot be easily integrated into existing optical systems because of their bulky dimensions. To replace conventional absorption cells, photonic crystal fibres filled with gas-phase material are promising devices owing to their robustness, reliability, and portable characteristics. In addition they can be directly embedded into existing optical systems and they perform well in harsh environments. In this experimental study, optical gas-phase frequency references based on photonic crystal technology are realised. The gas-sensing properties of different photonic crystal fibre samples are studied and the long-term stability and reliability of fibre gas cells are demonstrated. In addition an analytical model predicting the gas-filling time in photonic crystal fibres (PCF) is developed and can be applied to any type of fibre, fibre geometry, or length. Then fibre gas cells filled with acetylene gas, a recognised frequency reference gas-phase material, have been prepared to conduct fundamental research on slow & fast light generation in optical fibres to verify the possibilities of slow light in enhancing light-matter interaction. The group velocity of light is controlled by modifying the material and structural dispersive properties of the PCF absorption cells through stimulated Brillouin scattering and cavity ring resonators, respectively. We could demonstrate that material slow light has no impact on the molecular absorption effect whereas structural slow light has an impact on the absorption efficiency scaling linearly with the group index. Such radically different responses to slow light suggest that group velocity is not the universal physical quantity scaling light-matter interaction, and that the optical absorption of molecules is more closely related to the velocity of the electromagnetic energy. Finally the impact of slow light on the molecular absorption efficiency is also evaluated in dispersion-engineered photonic crystal waveguides. We demonstrate that in planar photonic crystal waveguides the field enhancement and its evanescent fraction have more impact on the absorption efficiency than the reduction of the group velocity of light.
High-resolution infrared absorption spectroscopy of acetylene gas is demonstrated in a dispersion-engineered photonic crystal waveguide under slow-light propagation. Experimental enhancement factors of 0.31 and 1.00 are obtained for TE and TM polarization, respectively, for group indices ranging from 1.5 to 6.7. The dependence of molecular absorption on the evanescent electric-field distribution and on the group index under structural slow-light illumination is experimentally demonstrated and confirmed by time-domain simulations.
The absorption of light by a gas molecule has been measured comparatively using light propagating in normal conditions and in a slow light regime. The experiment is designed to make the 2 measurements possible without modifying the interaction conditions, so that the sole effect of slow light is unambiguously observed. A 26% group velocity reduction induced by stimulated Brillouin scattering in a gas-filled microstructured fiber caused no observable change in the measured absorption, so that it is proved that material slow light does not enhance Beer-Lambert absorption and has a null impact on gas sensing or spectroscopic applications.
This thesis presents the development of photonic microcells for use as the host for coherent optics phenomena and related applications. A photonic microcell consists of a length of hollow-core photonic crystal fibre (HC-PCF) with a gas-filled core that is spliced to conventional optical fibre at either end to seal the gas within the fibre. Towards the goal of demonstrating and assessing the coherence properties of quantum optical effects in photonic microcells, the fabrication of two types of HC-PCF is presented. The established photonic bandgap HC-PCF offers extremely low transmission loss of ~10 dB/km over kilometre distances. However, the fibre has a limited transmission bandwidth of ~50 THz and exhibits modal coupling unfavourable for many applications. Work is presented on the tailoring of this fibre by control and shaping of the core-surround in order to improve its modal properties. A second type of HC-PCF is based on a large-pitch lattice, whose guidance relies on a new mechanism. This fibre exhibits a much improved bandwidth (>1000 THz) and has a relatively higher but still practical loss of ~1 dB/m. The development of photonic microcells at microbar pressure level and with low optical insertion loss is shown, an important step in the improvement of the technology for coherent optics applications which will take advantage of the extreme gas-laser interaction efficiency achieved in HC-PCF. Finally, quantum optical effects are demonstrated in HC-PCF and photonic microcells loaded with both the molecular gas acetylene and atomic vapour rubidium. The observation of electromagnetically induced transparency (EIT) in acetylene-filled HC-PCF represents the first such observation in a molecular gas, while the use of a photonic microcell allows a comparison of many experimental configurations to explore the coherence properties of coherent optical systems in the core of a HC-PCF. Furthermore, EIT is observed unambiguously in a rubidium loaded HC-PCF for the first time, and the anti-relaxation effects of a polymer coating demonstrated in this configuration.
The group velocity at which light pulses propagate through a dispersive material system is very different from the vacuum speed of light c, One refers to light as being "slow" for v g << c (Boyd & Gauthier, 2009) or "fast" for v g > c or v g <0 (Stenner et al, 2003 ).For v g <0, the pulse envelope appears to travel backward in the material (Gehring et al, 2006), and hence it is sometimes referred to as "backward light."The subject of slow light has caused keen interest in the past decade or more, and it is possible to control the group velocity of light pulses in the dispersive materials.Interest in slow and fast light dates back to the early days of the 20th century.Sommerfeld and Brillouin (Sommerfeld & Brillouin, 1960) were intrigued by the fact that theory predicts that v g can exceed c, which leads to apparent inconsistencies with Einstein's special theory of relativity.Experimental investigations of extreme propagation velocities were performed soon after the invention of the laser (Faxvog and et al, 1970).In 1999, Harris's group research work greatly stimulated researchers' interests, which showed that light could be slowed down to 17m/s.The result was obtained in ultra cold atom clouds with the use of electromagnetically induced transparency (EIT), which induces transparency in a material while allowing it to retain strong linear and nonlinear optical properties (Hau et al, 1999).Slow light can also be obtained through the use of the optical response of hot atomic vapors (Philips et al, 2001).These early research works require hard conditions and the slow light cannot operate in room temperature.Recently, researchers found ways to realize slow light operating in room temperature and solid-state materials, which are more suited for many practical applications, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.In this chapter, we describe some of the physical mechanisms that can be used to induce slow and fast light effects in room-temperature solids (Bigelow et al, 2003) and some of the exotic propagation effects that can thereby be observed.We also survey some applications of slow and fast light within the fields of quantum electronics and photonics. Fundamentals of slow and fast lightSlow and fast light refer to the group velocity of a light wave.The group velocity is the velocity most closely related to the velocity at which the peak of a light pulse moves through an optical dispersive material (Milonni, 2005), and is given by the standard result www.intechopen.comRecent Progress in Optical Fiber Research 82where n is the refractive (phase) index and ω is the angular frequency of the carrier wave of the light field.One refers to light as being slow light for v g << c, fast light for for v g > c, and backwards light for v g <0 or v g is negative.Extreme values of the group velocity invariably rely on the dominance of the second contribution to the group index of Equation ( 1).This contribution of course results from the frequency dependence of the refractive index, and for this reason extreme values of the group velocity are usually associated with the resonant or near-resonant response of material systems.According to this theory, slow light is expected in the wings of an absorption line and fast light is expected near line center, and the spatial dispersion, that is, the non-locality in space of the medium response, is another mechanism that can lead to slow light, as has been predicted (Kocharovskaya et al,2001) and observed (Strekalov et al, 2001).We catalogue the main methods to realize slow light in room temperature solid, namely slow light via stimulated Brillouin scattering(SBS), slow light via coherent population oscillations (CPO), tunable time delays based on group velocity dispersion or conversion/ dispersion(C/D), slow light in fiber Bragg gratings and so on.We will describe CPO and SBS slow light in more details.
The recent developments in fabrication of hollow core Photonic crystal fibres (HC-PCFs), especially Anti-resonant fibres (ARFs), made this class of fibre very attractive for gas-phase applications, which ultimately led to the concept of photonic reference cell. This device is a fully-connectorised, stand-alone, HC-PCF filled with a gas specimen. Its application spans from instrument calibration, quantum optics to high-resolution spectroscopy and metrology. For time and frequency applications, the use of alkali metals with narrow atomic features (in the kHz range) is a requirement for ultra-stable reference signals. However, the coherence time of atoms is strongly dependent on the vapour dynamics and photonic cell geometry. This dependency limits the use of alkali vapour in miniaturised reference cells, such as photonic cells, because of the short coherence time that leads to atomic features in the MHz range, for reference cells with cross-section of 100 μm, operating at room temperature. The diffusion of the vapour can be tailored by adding a mixture of inert gas (buffer gas), with resulting atomic features between kHz and sub-kHz range. This is a very well-known method widely used in standard reference cells. This thesis reports on the advances in HC-PCFs technology for time and frequency reference applications. Firstly, I present a method to interconnect solid core fibres and HC-PCFs with dissimilar core sizes by employing a mode field adapter (MFA) to mediate the joint. I model and demonstrate the use of such MFAs for a photonic cell, fully-connectorised to SMFs. Secondly, I demonstrate for the first time spectroscopy of coherent population trapping (CPT) dark resonance in Kagome-lattice ARFs filled with Cs. CPT is a quantum effect very useful in frequency reference applications as it can provide an indirect measurement of the Cs clock transition (~9.2 GHz). I model and demonstrate world record line-width narrowing of CPT dark resonance in HC-PCFs and micro-metre scale capillaries filled with thermal Cs-vapour, with experimental observation of line-widths below 50 kHz for a Kagome-lattice ARF with a hollow core diameter of 125 μm.
This thesis describes developments in the fabrication and applications of photonic microcells (PMCs). A PMC is a length of gas-filled hollow core-photonic crystal fibre (HC-PCF) that is hermetically sealed by splicing both ends to standard single mode fibre. A PMC enables integration of gas-filled HC-PCF into all-fibre systems with low insertion loss. PMCs have applications in coherent optics and metrology, where specific HC-PCF designs are advantageous. Two types of state-of-the-art HC-PCF, double bandgap HCPCF and large-pitch Kagome fibre, are fabricated. The double bandgap HC-PCF extends the usable bandwidth of the fibre by providing low loss guidance across two transmission bands. The large-pitch Kagome HC-PCF has a record low attenuation of 0.3 dB/m at 800 nm, while maintaining broadband guidance, which is partially attributed to the core shape. Three distinct developments in the field of PMCs are described. Firstly, a record length 20 metre acetylene-filled PMC is fabricated which is the key component in the first demonstration of an all-fibre slow and fast light system based on electromagnetically induced transparency. Secondly, a technique based on fibre tapering is presented which enables low loss integration of large core Kagome HC-PCFs into PMC form. Thirdly, micromirrors are developed and integrated with HC-PCF to confine light in the longitudinal dimension, providing a means to fabricate multi-pass PMCs. Two uncoated micromirrors are used to form a low finesse microcavity in Kagome HC-PCF, with record high fringe visibility using reflections from a silica/air junction. In collaboration with Kansas State University, an acetylene optical reference with sub-10 KHz accuracy and the first acetylene laser based on population inversion are demonstrated using Kagome HC-PCF.Finally, this thesis reports on rubidium vapour loading in HC-PCF with the ultimate aim being the production of a rubidium-filled PMC for applications in metrology. Preliminary results highlight the limited loading distance of the current technique and modified loading schemes are outlined accordingly.