This paper gives a new random construction for LDPC codes, which uses an iterative algorithm to avoid short cycles in the Tanner graph. The construction method has low complexity and great flexible choice in LDPC code parameters including code length, code rate, least girth of the graph, and the weight of column and row in the parity-check matrix. The method can be applied to the irregular LDPC codes and strict regular LDPC codes. Simulations show that the method performs well with iterative decoding.
This paper gives a new random construction for LDPC codes, which uses an iterative algorithm to avoid short cycles in the Tanner graph. The construction method has low complexity and great flexible choice in LDPC code parameters including code length, code rate, least girth of the graph, and the weight of column and row in the parity-check matrix. The method can be applied to the irregular LDPC codes and strict regular LDPC codes. Simulations show that the method performs well with iterative decoding.
This paper,based on algebra and graph,proposes a method for constructing structured low-density parity-check(LDPC) codes.In this method,the authors design a connected graph with three kinds of special path to ensure that the Tanner graph of the parity check matrix mapped from the connected graph is without short cycles.The construction method results in two classes of(3,k)-regular quasi-cyclic LDPC codes with girth 8 and 12 respectively.Furthermore,by extending this construction method,two classes of LDPC codes with column weight 2,whose girths are respectively 16 and 24,can be obtained.The simulation studies show that these codes can achieve better performance than randomly constructed regular LDPC codes over AWGN channels with iterative decoding.At the BER of 10-5,the new proposed(3,6)-regular(4356,2205) QC-LDPC code performs 1.48dB from the Shannon limit.Moreover,it outperforms the random regular LDPC code of comparable parameters by 0.1dB.For the new proposed structured LDPC codes with column weight 2,they can achieve about 2dB coding gains with respect to the random regular LDPC codes with similar block lengths and code rates.
In this paper, a method for constructing Low-Density Parity-Check (LDPC) codes of good performance in terms of Bit Error Rate (BER) using a computer search algorithm is presented. First, LDPC codes and encoding along with its Tanner graph representation is described. Then, a detailed description of the proposed construction algorithm is given. A Modified Shortest-Path (MSP) Algorithm of lower complexity is applied to obtain a code graph of the desired structure. The proposed algorithm works directly on the parity-check matrix of the LDPC code. The parity-check matrix of the code is constructed column by column subject to the bit-degree and girth constraints. Using the proposed algorithm, both regular and irregular LDPC codes have been constructed. Furthermore, not only have the girth been improved but also the rate of LDPC codes. Finally, by simulation results the constructed codes were shown to perform well over an additive white Gaussian noise (AWGN) channel.
This article presents a highly flexible method for constructing high-girth quasi-cyclic low-density parity-check (QC-LDPC) codes. The proposed algorithm constructs a Tanner graph formed by connecting groups of rows (check nodes) and columns (variable nodes) of the constructed code. To obtain a sub-matrix structure, rows and columns are divided into groups of equal sizes. Rows and columns in a group are connected in their numerical (positional) order to obtain a cyclic structure. Connected rows and columns must satisfy the desired minimum cycle length. We present conditions that guarantee desired girths. The proposed algorithm is by far more flexible in constructing a wide range (rates and lengths) of regular and irregular QC-LDPC codes compared to existing methods. The algorithm, which has linear complexity with respect to the number of rows or columns, provides an easy and fast way to construct QC-LDPC codes. Constructed codes show good bit error rate performances.
A new approach is proposed for constructing regular low-density parity-check (LDPC) codes based on tensor product of matrices. In this paper, first a general construction method of regular LDPC codes exploiting permutation matrices is described. Constructed codes have a quasi-cyclic structure with no short cycles of length 4 in their Tanner graph, hence simple encoding while maintaining good performance is achieved. The paper also demonstrates a generalized design, which covers a large family of LDPC codes and number of other construction methods. The new generalized LDPC codes are defined by a small number of parameters and cover a large set of code lengths and rates. Using these codes, LDPC matrices of any column weight and row weight can be constructed. Performance of these codes under iterative decoding compares well with other well-structured as well as random LDPC codes
Short cycles in the Tanner graph of a given LDPC code has negative effect on the performance of iterative decoding. To improve the performance, we presented an approach for constructing Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes whose associated Tanner graph has large girth and a small amount of short cycles. Each column block of the parity check matrix was designed by adding circulant permutation sub-matrices one after another, provided the current parity check matrix has minimal number of short cycles. The condition for the proposed QC-LDPC codes to have girth at least 6 was also analyzed. Regular and irregular QC-LDPC codes with various lengths and rates can be constructed. Simulations show that the proposed QC-LDPC codes have less short cycles and better performance than existing progressive edge growth based QC-LDPC codes.
Low-density parity-check (LDPC) codes have been shown to have good error correcting performance approaching Shannon’s limit. Good error correcting performance enables efficient and reliable communication. However, a LDPC code decoding algorithm needs to be executed efficiently to meet cost, time, power and bandwidth requirements of target applications. The constructed codes should also meet error rate performance requirements of those applications. Since their rediscovery, there has been much research work on LDPC code construction and implementation. LDPC codes can be designed over a wide space with parameters such as girth, rate and length. There is no unique method of constructing LDPC codes. Existing construction methods are limited in some way in producing good error correcting performing and easily implementable codes for a given rate and length. There is a need to develop methods of constructing codes over a wide range of rates and lengths with good performance and ease of hardware implementability. LDPC code hardware design and implementation depend on the structure of target LDPC code and is also as varied as LDPC matrix designs and constructions. There are several factors to be considered including decoding algorithm computations,processing nodes interconnection network, number of processing nodes, amount of memory, number of quantization bits and decoding delay. All of these issues can be handled in several different ways. \nThis thesis is about construction of LDPC codes and their hardware implementation. LDPC code construction and implementation issues mentioned above are too many to be addressed in one thesis. The main contribution of this thesis is the development of LDPC code construction methods for some classes of structured LDPC codes and techniques for reducing decoding time. We introduce two main methods for constructing structured codes. In the first method, column-weight two LDPC codes are derived from distance graphs. A wide range of girths, rates and lengths are obtained compared to existing methods. The performance and implementation complexity of obtained codes depends on the structure of their corresponding distance graphs. In the second method, a search algorithm based on bit-filing and progressive-edge growth algorithms is introduced for constructing quasi-cyclic LDPC codes. The algorithm can be used to form a distance or Tanner graph of a code. This method could also obtain codes over a wide range of parameters. Cycles of length four are avoided by observing the row-column constraint. \nRow-column connections observing this condition are searched sequentially or randomly. Although the girth conditions are not sufficient beyond six, larger girths codes were easily obtained especially at low rates. The advantage of this algorithm compared to other methods is its flexibility. It could be used to construct codes for a given rate and length with girths of at least six for any sub-matrix configuration or rearrangement. The code size is also easily varied by increasing or decreasing sub-matrix size. Codes obtained using a sequential search criteria show poor performance at low girths (6 and 8) while random searches result in good performing codes. \nQuasi-cyclic codes could be implemented in a variety of decoder architectures. One of the many options is the choice of processing nodes interconnect. We show how quasi-cyclic codes processing could be scheduled through a multistage network. Although these net-works have more delay than other modes of communication, they offer more flexibility at a reasonable cost. Banyan and Benes networks are suggested as the most suitable networks. \nDecoding delay is also one of several issues considered in decoder design and implementation. In this thesis, we overlap check and variable node computations to reduce decoding time. Three techniques are discussed, two of which are introduced in this thesis. The techniques are code matrix permutation, matrix space restriction and sub-matrix row-column scheduling. Matrix permutation rearranges the parity-check matrix such that rows and columns that do not have connections in common are separated. This techniques can be applied to any matrix. Its effectiveness largely depends on the structure of the code. We show that its success also depends on the size of row and column weights. Matrix space restriction is another technique that can be applied to any code and has fixed reduction in time or amount of overlap. Its success depends on the amount of restriction and may be traded with performance loss. The third technique already suggested in literature relies on the internal cyclic structure of sub-matrices to achieve overlapping. The technique is limited to LDPC code matrices in which the number of sub-matrices is equal to row and column weights. We show that it can be applied to other codes with a lager number of sub-matrices than code weights. However, in this case maximum overlap is not guaranteed. We calculate the lower bound on the amount of overlapping. Overlapping could be applied to any sub-matrix configuration of quasi-cyclic codes by arbitrarily choosing \nthe starting rows for processing. Overlapping decoding time depends on inter-iteration waiting times. We show that there are upper bounds on waiting times which depend on the code weights. Waiting times could be further reduced by restricting shifts in identity sub-matrices or using smaller sub-matrices. This overlapping technique can reduce the decoding time by up to 50% compared to conventional message and computation scheduling. \nTechniques of matrix permutation and space restriction results in decoder architectures that are flexible in LDPC code design in terms of code weights and size. This is due to the fact that with these techniques, rows and columns are processed in sequential order to achieve overlapping. However, in the existing technique, all sub-matrices have to be processed in parallel to achieve overlapping. Parallel processing of all code sub-matrices requires the architecture to have the number of processing units at least equal to the number sub-matrices. Processing units and memory space should therefore be distributed among the sub-matrices according to the sub-matrices arrangement. This leads to high complexity or inflexibility in the decoder architecture. We propose a simple, programmable and high throughput decoder architecture based on matrix permutation and space restriction techniques.