Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Surface trap for ytterbium ions

Jonathan A. Campbell

Published Jan 1, 2006• 1 citation
OpenAlex

Abstract

Physics We conducted an experiment to load a shallow planar ion trap from a cold atom source of Ytterbium using photoionization. The surface trap consisted of a three-rod radio frequency Paul trap fabricated using standard printed circuit board techniques. The cold atom source was an isotope-selective magneto-optical trap of naturally-occurring Yb isotopes. The confining beams were provided by commercially-available ultra-violet diode lasers locked to an atomic reference using the Dichroic Atomic Vapor Laser Lock technique. We used photoionization from the Yb magneto-optical trap located within the region of the ion trapping potential.

Related papers

Loading a Planar RF Paul Trap From a Cold Yb + Source

Brendan Shields

In this thesis, we demonstrate a functioning planar radio frequency, three-rod Paul Trap, loaded with Yb+ ions that have been photoionized from a source of neutral atoms, which were cooled in a magneto-optical trap. Planar ion traps have only recently been successfully loaded[1], and never from a cold ion source. Additionally, ionizing directly from a MOT allows for isotope selection.

•Jan 1, 2006•1 citation

Bright source of cold ions for surface-electrode traps

Marko Cetina, Andrew T. Grier, Jonathan Campbell +2 more

We produce large numbers of low-energy ions by photoionization of laser-cooled atoms inside a surface-electrode-based Paul trap. The isotope-selective trap's loading rate of $4\ifmmode\times\else\texttimes\fi{}{10}^{5}\phantom{\rule{0.3em}{0ex}}{\mathrm{Yb}}^{+}\phantom{\rule{0.3em}{0ex}}\mathrm{ions}∕\mathrm{s}$ exceeds that attained by photoionization (electron-impact ionization) of an atomic beam by three (six) orders of magnitude. Traps as shallow as $0.13\phantom{\rule{0.3em}{0ex}}\mathrm{eV}$ are easily loaded with this technique. The ions are confined in the same spatial region as the laser-cooled atoms, which will allow the experimental investigation of interactions between cold ions and cold atoms or Bose-Einstein condensates.

arXiv:physics/0702025•Physical Review A•Oct 24, 2007•54 citations

Yb+ ion trapping and optimum planar trap geometries for scalable quantum technology

Altaf Hussain Nizamani

Trapped ions in linear Paul traps are largely isolated from interaction with the environment. This property of trapped ions make them a primary choice for quantum technology. \nOver the last decade, trapped atomic ions in linear radio frequency Paul traps have shown to be an important tool to implement quantum algorithms. The scalability of linear ion \ntraps is required to handle large numbers of qubits, in order to implement useful quantum computation. Advance micro-fabrication technology allows the realisation of scalable ion traps. Further developments of micro-trap designs, for the purpose of scalable quantum technology, requires inter-disciplinary investigations of ion traps. Micro-scale ion trap designs typically require a versatile experimental setup. The first part of this thesis describes such an experimental setup including a chip bracket that can host macroscopic ion traps as well as advanced symmetric and asymmetric ion trap chips with up to 90 control electrodes. The system provides versatile optical access for both type of traps and the vacuum chamber is designed in a way so the ion traps can be replaced within a short amount of time. To test the working of the setup, a macroscopic ion trap with an ion-electrode distance of 310±10 μm is used to trap ytterbium ions (Yb+). The trap is characterised by measuring the heating rate, (n•), and spectral noise density SE(ω). A \nphotoionisation technique is used to ionise the different isotopes of Yb in our trap. Isotope selective photoionisation requires exact measurements of 1So↔1P1 transition for the different Yb isotopes. A technique to measure these resonant frequencies is described. \nThis technique works by observing and aligning fluorescence spots and by using this technique, the 1So↔1P1 transition frequencies for stable isotopes of Yb were measured with an accuracy of 60 MHz. These new measured transition frequencies for stable Yb isotopes differ from previously published work by 660 MHz. Furthermore, this technique can also be used to obtain the transition frequencies at different laser-atomic beam angles, typical for non-perpendicular laser-atomic beam angles. The second part of this thesis discusses the optimisation of surface trap geometries as they are being used to implement scalable ion trap designs which consist of a large number of trapping zones. The trap depth in surface traps is low compared to symmetric traps of similar dimensions. How to optimise the trap geometry to achieve maximum trap depth for a given ion height above the trap electrodes, is discussed. Fast and adiabatic ion shuttling operations in one dimension as well as ion separation and recombination processes are important for many quantum information implementations. The maximum speed of separation of trapped ions for adiabatic shuttling operations depends on the secular frequencies, the trapped ion experiences in the process. It will be shown how such ion trap structures have to be designed for fast ion separation process and linear shuttling. Numerical results of adiabatic shuttling operations for trapped ions in such trap structures are also presented.

•Aug 6, 2011•1 citation

Loading of a surface-electrode ion trap from a remote, precooled source

Jeremy Sage, Andrew J. Kerman, John Chiaverini

We demonstrate loading of ions into a surface-electrode trap (SET) from a remote, laser-cooled source of neutral atoms. We first cool and load $\ensuremath{\sim}$${10}^{6}$ neutral ${}^{88}$Sr atoms into a magneto-optical trap from an oven that has no line of sight with the SET. The cold atoms are then pushed with a resonant laser into the trap region where they are subsequently photoionized and trapped in an SET operated at a cryogenic temperature of 4.6 K. We present studies of the loading process and show that our technique achieves ion loading into a shallow (15 meV depth) trap at rates as high as 125 ions/s while drastically reducing the amount of metal deposition on the trap surface as compared with direct loading from a hot vapor. Furthermore, we note that due to multiple stages of isotopic filtering in our loading process, this technique has the potential for enhanced isotopic selectivity over other loading methods. Rapid loading from a clean, isotopically pure, and precooled source may enable scalable quantum-information processing with trapped ions in large, low-depth surface-trap arrays that are not amenable to loading from a hot atomic beam.

arXiv:1205.6379•Physical Review A•Jul 20, 2012•47 citations

Interaction of trapped ions with trapped atoms

Andrew T. Grier

In this thesis, I present results from two Paul-trap based ion traps carried out in the Vuletić laboratory: the Atom-Ion trap for collision studies between cold atoms and cold ions, and the Cavity-Array trap for studying the interaction between ionic ensembles and photons. The Atom-Ion trap overlaps a surface-planar ion trap with a magneto-optical trap (MOT) for neutral atoms. The initial results of this system were loading of a shallow surface-planar ion trap at an unprecedented high rate of 4. 105 s-1 and isotopic purity by photoionization from the MOT. We demonstrate the first collisions between trapped atoms and trapped ions in the Langevin collision regime between Yb+ and Yb. A measurement of the Langevin rate constant through charge-exchange collisions between [alpha]Yb+ and [beta]Yb over three orders of magnitude in collision energy down to 3 yueV follows. The measured rate coefficient of 6 - 10-10 cm 3 s-1 is in good agreement with the Langevin model based on theoretical predictions of the polarizability of Yb. The theory and limits of sympathetic cooling of ions by localized cold atoms at low temperature is outlined. Measurements of momentum-transfer collisions between Yb+ and Rb are presented indicating that momentum-transfer collisions affect the ion energy at the Langevin rate. Finally, the fabrication and assembly of the Cavity-Array trap are presented. The Cavity-Array trap overlaps a high-finesse optical cavity with a linear array of Paul traps in order to reach the high co-operativity limit with trapped ions. Initial results from loading of the Cavity- Array trap are shown, indicating successful overlap of the optical cavity mode with the ion trapping region and the ability to load individual sites of the array ion trap.

•Jan 1, 2011•0 citations

Isotope-selective trapping of doubly charged Yb ions

Martin M. Schauer, James R. Danielson, D. Feldbaum +5 more

We report isotope-selective loading and trapping of doubly ionized ytterbium into an rf quadrupole trap. Isotopically pure clouds of $^{174}\mathrm{Yb}$${}^{+}$ ions were first loaded into the rf trap via a multistage photoionization process. The Yb${}^{2+}$ ions were then produced by electron impact ionization of the trapped Yb${}^{+}$ ions. The Yb${}^{2+}$ ions were subsequently detected by rf excitation of their secular motion in the trap, which led to sympathetic heating and changes in the fluorescence of the laser-cooled Yb${}^{+}$ ions. The presence of doubly charged Yb ions was further verified by the appearance of a dark band in the center of Yb${}^{+}$ ion cloud after electron impact ionization. We discuss the possible formation of Yb${}^{2+}$H and similar compounds and the schemes for the direct optical detection of the Yb${}^{2+}$ ions.

Physical Review A•Dec 27, 2010•9 citations
Physics We conducted an experiment to load a shallow planar ion trap from a cold atom source of Ytterbium using photoionization. The surface trap consisted of a three-rod radio frequency Paul trap fabricated using standard printed circuit board techniques. The cold atom source was an isotope-selective magneto-optical trap of naturally-occurring Yb isotopes. The confining beams were provided by commercially-available ultra-violet diode lasers locked to an atomic reference using the Dichroic Atomic Vapor Laser Lock technique. We used photoionization from the Yb magneto-optical trap located within the region of the ion trapping potential.
We produce large numbers of low-energy ions by photoionization of laser-cooled atoms inside a surface-electrode-based Paul trap. The isotope-selective trap's loading rate of $4\ifmmode\times\else\texttimes\fi{}{10}^{5}\phantom{\rule{0.3em}{0ex}}{\mathrm{Yb}}^{+}\phantom{\rule{0.3em}{0ex}}\mathrm{ions}∕\mathrm{s}$ exceeds that attained by photoionization (electron-impact ionization) of an atomic beam by three (six) orders of magnitude. Traps as shallow as 0.13eV0.13\phantom{\rule{0.3em}{0ex}}\mathrm{eV}0.13eV are easily loaded with this technique. The ions are confined in the same spatial region as the laser-cooled atoms, which will allow the experimental investigation of interactions between cold ions and cold atoms or Bose-Einstein condensates.
Trapped ions in linear Paul traps are largely isolated from interaction with the environment. This property of trapped ions make them a primary choice for quantum technology. \nOver the last decade, trapped atomic ions in linear radio frequency Paul traps have shown to be an important tool to implement quantum algorithms. The scalability of linear ion \ntraps is required to handle large numbers of qubits, in order to implement useful quantum computation. Advance micro-fabrication technology allows the realisation of scalable ion traps. Further developments of micro-trap designs, for the purpose of scalable quantum technology, requires inter-disciplinary investigations of ion traps. Micro-scale ion trap designs typically require a versatile experimental setup. The first part of this thesis describes such an experimental setup including a chip bracket that can host macroscopic ion traps as well as advanced symmetric and asymmetric ion trap chips with up to 90 control electrodes. The system provides versatile optical access for both type of traps and the vacuum chamber is designed in a way so the ion traps can be replaced within a short amount of time. To test the working of the setup, a macroscopic ion trap with an ion-electrode distance of 310±10 μm is used to trap ytterbium ions (Yb+). The trap is characterised by measuring the heating rate, (n•), and spectral noise density SE(ω). A \nphotoionisation technique is used to ionise the different isotopes of Yb in our trap. Isotope selective photoionisation requires exact measurements of 1So↔1P1 transition for the different Yb isotopes. A technique to measure these resonant frequencies is described. \nThis technique works by observing and aligning fluorescence spots and by using this technique, the 1So↔1P1 transition frequencies for stable isotopes of Yb were measured with an accuracy of 60 MHz. These new measured transition frequencies for stable Yb isotopes differ from previously published work by 660 MHz. Furthermore, this technique can also be used to obtain the transition frequencies at different laser-atomic beam angles, typical for non-perpendicular laser-atomic beam angles. The second part of this thesis discusses the optimisation of surface trap geometries as they are being used to implement scalable ion trap designs which consist of a large number of trapping zones. The trap depth in surface traps is low compared to symmetric traps of similar dimensions. How to optimise the trap geometry to achieve maximum trap depth for a given ion height above the trap electrodes, is discussed. Fast and adiabatic ion shuttling operations in one dimension as well as ion separation and recombination processes are important for many quantum information implementations. The maximum speed of separation of trapped ions for adiabatic shuttling operations depends on the secular frequencies, the trapped ion experiences in the process. It will be shown how such ion trap structures have to be designed for fast ion separation process and linear shuttling. Numerical results of adiabatic shuttling operations for trapped ions in such trap structures are also presented.
We demonstrate loading of ions into a surface-electrode trap (SET) from a remote, laser-cooled source of neutral atoms. We first cool and load $\ensuremath{\sim}$106{10}^{6}106 neutral 88{}^{88}88Sr atoms into a magneto-optical trap from an oven that has no line of sight with the SET. The cold atoms are then pushed with a resonant laser into the trap region where they are subsequently photoionized and trapped in an SET operated at a cryogenic temperature of 4.6 K. We present studies of the loading process and show that our technique achieves ion loading into a shallow (15 meV depth) trap at rates as high as 125 ions/s while drastically reducing the amount of metal deposition on the trap surface as compared with direct loading from a hot vapor. Furthermore, we note that due to multiple stages of isotopic filtering in our loading process, this technique has the potential for enhanced isotopic selectivity over other loading methods. Rapid loading from a clean, isotopically pure, and precooled source may enable scalable quantum-information processing with trapped ions in large, low-depth surface-trap arrays that are not amenable to loading from a hot atomic beam.
In this thesis, I present results from two Paul-trap based ion traps carried out in the Vuletić laboratory: the Atom-Ion trap for collision studies between cold atoms and cold ions, and the Cavity-Array trap for studying the interaction between ionic ensembles and photons. The Atom-Ion trap overlaps a surface-planar ion trap with a magneto-optical trap (MOT) for neutral atoms. The initial results of this system were loading of a shallow surface-planar ion trap at an unprecedented high rate of 4. 105 s-1 and isotopic purity by photoionization from the MOT. We demonstrate the first collisions between trapped atoms and trapped ions in the Langevin collision regime between Yb+ and Yb. A measurement of the Langevin rate constant through charge-exchange collisions between [alpha]Yb+ and [beta]Yb over three orders of magnitude in collision energy down to 3 yueV follows. The measured rate coefficient of 6 - 10-10 cm 3 s-1 is in good agreement with the Langevin model based on theoretical predictions of the polarizability of Yb. The theory and limits of sympathetic cooling of ions by localized cold atoms at low temperature is outlined. Measurements of momentum-transfer collisions between Yb+ and Rb are presented indicating that momentum-transfer collisions affect the ion energy at the Langevin rate. Finally, the fabrication and assembly of the Cavity-Array trap are presented. The Cavity-Array trap overlaps a high-finesse optical cavity with a linear array of Paul traps in order to reach the high co-operativity limit with trapped ions. Initial results from loading of the Cavity- Array trap are shown, indicating successful overlap of the optical cavity mode with the ion trapping region and the ability to load individual sites of the array ion trap.
We report isotope-selective loading and trapping of doubly ionized ytterbium into an rf quadrupole trap. Isotopically pure clouds of 174Yb^{174}\mathrm{Yb}174Yb+{}^{+}+ ions were first loaded into the rf trap via a multistage photoionization process. The Yb2+{}^{2+}2+ ions were then produced by electron impact ionization of the trapped Yb+{}^{+}+ ions. The Yb2+{}^{2+}2+ ions were subsequently detected by rf excitation of their secular motion in the trap, which led to sympathetic heating and changes in the fluorescence of the laser-cooled Yb+{}^{+}+ ions. The presence of doubly charged Yb ions was further verified by the appearance of a dark band in the center of Yb+{}^{+}+ ion cloud after electron impact ionization. We discuss the possible formation of Yb2+{}^{2+}2+H and similar compounds and the schemes for the direct optical detection of the Yb2+{}^{2+}2+ ions.