Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cambridge University Press eBooks

Formal perturbation theory

Isaiah Shavitt, Rodney J. Bartlett

Published Aug 6, 2009• 0 citations
Publisher

Abstract

There are two stages in the study of perturbation theory and related techniques (although they are mixed intimately in most derivations in the literature). The first is the formal development, carried out in terms of the total Hamiltonian and total wave function (and total zero-order wave function), without attempt to express anything in terms of one- and two-body quantities (components of Ĥ, orbitals, integrals over orbitals etc.). We can make a considerable amount of progress in this way before considering the detailed form of Ĥ. The second is the many-body development, where all expressions are obtained in terms of orbitals (one-electron states) and oneand two-electron integrals. We shall try to keep these separate for a while and begin with a consideration of formal perturbation theory.

DOI
10.1017/cbo9780511596834.003

Related papers

Perturbation Theory in Quantum Mechanics

Francisco Marcelo Fernández

The standard textbook formulas for the perturbation corrections are somewhat cumbersome for a systematic calculation of sufficiently high order. In this book we show several alternative strategies that are easily programmable for numerical or algebraic calculation. We are mainly concerned with the derivation of exact perturbation corrections, and therefore concentrate on sufficiently simple nontrivial models having physical application. However, some of the algorithms discussed in this book are also suitable for numerical calculation.

CRC Press eBooks•Sep 19, 2000•2 citations

Self-consistent many-body perturbation theory in range-separated density-functional theory: A one-electron reduced-density-matrix-based formulation

Emmanuel Fromager, Hans Jørgen Aa. Jensen

In many cases, density-functional theory (DFT) with current standard approximate functionals offers a relatively accurate and computationally cheap description of the short-range dynamic electron correlation effects. However, in general, standard DFT does not treat the dispersion interaction effects adequately which, on the other hand, can be described by many-body perturbation theory (MBPT). It is therefore of interest to develop a hybrid model which combines the best of both the MBPT and DFT approaches. This can be achieved by splitting the two-electron interaction into long-range and short-range parts; the long-range part is then treated by MBPT and the short-range part by DFT. This work deals with the formulation of a general MBPT-DFT model (i.e., valid for any type of zeroth-order Hamiltonian) based on such a range separation. Applying the Rayleigh-Schr\"odinger formalism in this context, one finds that the generalized Bloch equation becomes self-consistent at each order of perturbation. This complication arises because the short-range part of the energy is a functional of the exact electron density, which is expanded in a perturbation series. In order to address this ``self-consistency problem'' and provide computable orbital-based expressions for any order of perturbation, a general one-electron reduced-density-matrix-based formalism is proposed. Two applications of our general formalism are presented: The derivation of a hybrid second-order M\o{}ller-Plesset-DFT model and the formulation of a range-separated optimized effective potential method based on a hybrid G\"orling-Levy-type MBPT-DFT model.

Physical Review A•Aug 7, 2008•67 citations

Theory of strongly correlated electron systems: Hubbard–Anderson models from an exact Hamiltonian, and perturbation theory near the atomic limit within a nonorthogonal basis set

I. Sandalov, Börje Johansson, Olle Eriksson

Abstract The theory of correlated electron systems is formulated in a form that allows the use as a reference point a density functional theory in the local density approximation (LDA DFT) for solids or molecules. The theory is constructed in two steps. As a first step, the total Hamiltonian is transformed into a correlated form. To elucidate the microscopic origin of the parameters of the periodic Hubbard–Anderson model (PHAM) the terms of the full Hamiltonian that have the operator structure of PHAM are separated. It is found that the matrix element of mixing interaction includes ion configuration‐ and number of particles‐dependent contributions from the Coulomb interaction. In a second step the diagram technique (DT) is developed by means of generalization of the Baym–Kadanoff method for correlated systems. The advantages of the method are that: (1) A nonorthogonal basis can be used, in particular the one generated by LDA DFT; (2) the equations for Green's functions (GFs) for the Fermi and Bose types of quasiparticles can be formulated in the form of a closed system of functional equations. The latter allows us to avoid the question of the nonunique decoupling procedure existing in previous versions of the DT and perform the expansion in terms of dressed GFs. Although the expressions for all interactions depend on the overlap matrix, it is shown that the theory is formally equivalent to one with orthogonal states with redefined interactions. When the PHAM is treated from the atomic‐limit side the vertexes are generated by kinematic interactions. The latter arise due to nontrivial commutation relations between X‐operators and come from the mixing, hopping, and overlap of states. The equations for GFs are derived within the nonorthogonal basis set in Hubbard‐I, one‐loop and random‐phase approximations with respect to kinematic interactions. The self‐consistent equation for “Hubbard Us” is derived. The technique developed is general, in particular its “bosonic” part can be used for description of spin systems with arbitrary anisotropy, systems with orbital ordering, or ordering of multipoles. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 113–143, 2003

arXiv:cond-mat/0011259•International Journal of Quantum Chemistry•Jan 1, 2003•31 citations

Perturbation Theory

Michel Talagrand

We give a brief and basic introduction to perturbation theory. The main idea is to attempt to consider the situation of interest as a small perturbation of a simpler situation (which can be understood completely), and in particular to consider a system with a weak interaction as a perturbation of a non-interacting system. We develop the interaction picture, which allows approximating the time-evolution of an interacting system by the partial sums of the Dyson series, a fundamental tool for the sequel. We illustrate these ideas on a rudimentary model of the interaction of electrons and “photons”.

Cambridge University Press eBooks•Feb 22, 2022•0 citations

Perturbation problems in quantum mechanics

John Edward Lennard-Jones

Abstract One of the great achievements of the Schrödinger wave-mechanics is the elegance of its perturbation theory, which has brought many problems, formerly considered intractable, within the range of a highly-developed mathematical technique. It is not necessary at this stage to review the numerous applications which have been made of this perturbation theory or to dwell upon its many advantages. The important advance towards an understanding of chemical forces which it has made possible is in itself a considerable achievement. There are, however, certain disadvantages in the perturbation theory in its present form, which limit the extent of its applications to complex problems of atomic and molecular structure. If the interaction of atoms, for instance, is to be calculated, as it most desirable, improved methods will have to be found.

Proceedings of the Royal Society of London Series A Containing Papers of a Mathematical and Physical Character•Nov 3, 1930•140 citations

Development of Efficient Algorithms for Quantum Chemistry Calculations of Large Molecules

和也 石村, カズヤ イシムラ, Kazuya Ishimura

Quantum chemistry plays an important role in elucidating molecular geometries, electronic states, and reaction mechanisms, because of the developments of a variety of theoretical methods, such as Hartree-Fock (HF), Møler-Plesset (MP) perturbation, configuration interaction (CI), coupled-cluster (CC), and density functional theory (DFT) methods. Electronic structure calculations have been carried out by not only theoretical chemists but also experimental chemists. DFT is currently most widely used to investigate large molecules in the ground state as well as small molecules because of the low computational cost. However, the generally used functionals fail to describe correctly non-covalent interactions that are important for host-guest molecules, self-assembly, and molecular recognition, and they tend to underestimate reaction barriers. Many attempts have been made to develop new functionals and add semiempirical or empirical correction terms to standard functionals, but no generally accepted DFT method has emerged yet. Second-order Møler-Plesset perturbation theory (MP2) is the simplest method that includes electron correlation important for non-covalent interactions and reaction barriers nonempirically. However, the computational cost of MP2 is considerably higher than that of DFT. In addition, much larger sizes of fast memory and hard disk are required in MP2 calculations. These make MP2 calculations increasingly difficult for larger molecules. Since workstation or personal computer (PC) clusters have become popular for quantum chemistry calculations, an efficient parallel calculation is a solution of the problem. Therefore, new parallel algorithms for MP2 energy and gradient calculations are presented in this thesis. Furthermore, an efficient algorithm for the generation of two-electron repulsion integrals (ERIs) which is important in quantum chemistry calculations is also presented. For the calculations of excited states, different approaches are required: for example, CI, multi-configuration self-consistent field (MCSCF), time-dependent DFT (TDDFT), and symmetry adapted cluster (SAC)/SAC-CI methods. One of the most accurate methods is SAC/SAC-CI, as demonstrated for many molecules. In this thesis, SAC/SAC-CI calculations of ground, ionized, and excited states are presented. This thesis consists of five chapters: a new algorithm of two-electron repulsion integral calculations (Chapter I), a new parallel algorithm of MP2 energy calculations (Chapter II), a new parallel algorithm of MP2 energy gradient calculations (Chapter III), applications of MP2 calculations (Chapter IV), and SAC/SAC-CI calculations of ionized and excited states (Chapter V). In quantum chemistry calculations, the generation of ERIs is one of the most basic subjects and is the most time-consuming step especially in direct SCF calculations. Many algorithms have been developed to reduce the computational cost. In Pople-Hehre algorithm, Cartesian axes are rotated to make several coordinate components zero or constant, so that these components are skipped in the generation of ERIs. In McMurchie-Davidson algorithm, ERIs are generated from (ss|ss) type integrals using a recurrence relation derived from Hermite polynomials. By combining these two algorithms, a new algorithm is developed in Chapter I. The results show that the new algorithm reduces the computational cost by 10 - 40%, as compared with the original algorithms. It is notable that the generation of ERIs including d functions is considerably fast. The program implemented officially in GAMESS in 2004 has been used all over the world. In quantum mechanics, perturbation methods can be used for adding corrections to reference solutions. In the MP perturbation method, a sum over Fock operators is used as the reference term, and the exact two-electron repulsion operator minus twice the average two-electron repulsion operator is used as the perturbation term. It is the advantage that the MP perturbation method is size consistent and size extensive, unlike truncated CI methods. The zero-order wave function is the HF Slater determinant, and the zero-order energy is expressed as a sum of occupied molecular orbital (MO) energies. The first-order perturbation is the correction for the overcounting of two-electron repulsions at zero-order, and the first-order energy corresponds to the HF energy. The MP correlation starts at second-order. In general, second-order (MP2) accounts for 80 - 90% of electron correlation. Therefore, MP2 is focused in this thesis since it is applicable to large molecules with considerable reliability and low computational cost. The formal computational scaling of MP2 energy calculations with respect to molecular size is fifth order, much higher than that of DFT energy calculations. Therefore, less expensive methods, such as Local MP2, density fitting (resolution of identity, RI) MP2, and Laplace Transform MP2, have been developed. However, all of these methods include approximations or cut-offs that need to be checked against full MP2 energies. An alternative approach to reduce the computational cost is to parallelize MP2 energy calculations. A number of papers on parallel MP2 energy calculations have been published. Almost all of them are based on simple parallelization methods that distribute only atomic orbital (AO) or MO indices to each processor. These methods have a disadvantage since intermediate integrals are broadcasted to all CPUs or the same AO ERIs are generated in all processors. Baker and Pulay developed a new parallel algorithm using SaebøAlmlöf integral transformation method. This algorithm parallelizes the first half transformation by AO indices and the second half transformation by MO indices. The advantages are that the total amount of network communication is independent of the number of processors and the AO integrals are generated only once. The disadvantage is the I/O overhead for the sorting of half-transformed integrals. A new parallel algorithm for MP2 energy calculations based on the two-step parallelization idea is presented in Chapter II. In this algorithm, AO indices are distributed in the AO integral generation and the first three quarter transformation, and MO indices are distributed in the last quarter transformation and MP2 energy calculation. Because the algorithm makes the sorting of intermediate integrals very simple, the parallel efficiency is highly improved and the I/O overhead is removed. Furthermore, the algorithm reduces highly the floating point operation (FLOP) count as well as the required memory and hard disk space, in comparison with other algorithms. Test calculations of taxol (C47H51NO14) and luciferin (C11H8N2O3S2) were performed on a cluster of Pentium 4 computers connected by gigabit Ethernet. The parallel scaling of the developed code is excellent up to the largest number of processors we have tested. For instance, the elapsed time for the MP2 energy calculations on 16 processors is on average 15.4 times faster than that on the single-processor. Determination of molecular geometries and reaction paths is a fundamental task in quantum chemistry and requires energy gradients with respect to nuclear coordinates. In Chapter III, a new parallel algorithm for MP2 energy gradient calculations is presented. The algorithm consists of 5 steps, the integral transformation, the MP2 amplitude calculation, the MP2 Lagrangian calculation, the coupled-perturbed HF calculation, and the integral derivative calculation. All steps are parallelized by distributing AO or MO indices. The algorithm also reduces the FLOP count, the required memory, and hard disk space. Test calculations of MP2 energy gradients were performed for taxol and luciferin on a cluster of Pentium 4 computers. The speedups are very good up to 80 CPU cores we have tested. For instance, the speedup ratios are 28.2 - 33.0 on 32 processors, corresponding to 88% - 103% of linear speedup. This indicates the high parallel efficiency of the present algorithm. The calculation of taxol with 6-31G(d) (1032 contracted basis functions) finishes within 2 hours on 32 processors, which requires only 1.8GB memory and 13.4GB hard disk per processor. Therefore, geometry optimization of molecules with 1000 basis functions can be easily performed using standard PC clusters. In Chapter IV, several applications of MP2 are performed using the program developed in Chapters II and III. Some molecules that DFT cannot treat well are optimized at the MP2 level. Geometry optimization is also carried out using the spin-component scaled (SCS) MP2 method. In this method, a different scaling is employed for the same and opposite spin components of the MP2 energy, so that SCS-MP2 performs as well as the much more costly CCSD(T) method at a high level of theory. SAC theory is developed for ground states and based on CC theory that describes higher-order electron correlation. The main factor of electron correlation is collisions of two electrons. In CC theory, most collisions of four electrons can be taken in as the product of collisions of tw

•Sep 28, 2007•0 citations
There are two stages in the study of perturbation theory and related techniques (although they are mixed intimately in most derivations in the literature). The first is the formal development, carried out in terms of the total Hamiltonian and total wave function (and total zero-order wave function), without attempt to express anything in terms of one- and two-body quantities (components of Ĥ, orbitals, integrals over orbitals etc.). We can make a considerable amount of progress in this way before considering the detailed form of Ĥ. The second is the many-body development, where all expressions are obtained in terms of orbitals (one-electron states) and oneand two-electron integrals. We shall try to keep these separate for a while and begin with a consideration of formal perturbation theory.
The standard textbook formulas for the perturbation corrections are somewhat cumbersome for a systematic calculation of sufficiently high order. In this book we show several alternative strategies that are easily programmable for numerical or algebraic calculation. We are mainly concerned with the derivation of exact perturbation corrections, and therefore concentrate on sufficiently simple nontrivial models having physical application. However, some of the algorithms discussed in this book are also suitable for numerical calculation.
In many cases, density-functional theory (DFT) with current standard approximate functionals offers a relatively accurate and computationally cheap description of the short-range dynamic electron correlation effects. However, in general, standard DFT does not treat the dispersion interaction effects adequately which, on the other hand, can be described by many-body perturbation theory (MBPT). It is therefore of interest to develop a hybrid model which combines the best of both the MBPT and DFT approaches. This can be achieved by splitting the two-electron interaction into long-range and short-range parts; the long-range part is then treated by MBPT and the short-range part by DFT. This work deals with the formulation of a general MBPT-DFT model (i.e., valid for any type of zeroth-order Hamiltonian) based on such a range separation. Applying the Rayleigh-Schr\"odinger formalism in this context, one finds that the generalized Bloch equation becomes self-consistent at each order of perturbation. This complication arises because the short-range part of the energy is a functional of the exact electron density, which is expanded in a perturbation series. In order to address this ``self-consistency problem'' and provide computable orbital-based expressions for any order of perturbation, a general one-electron reduced-density-matrix-based formalism is proposed. Two applications of our general formalism are presented: The derivation of a hybrid second-order M\o{}ller-Plesset-DFT model and the formulation of a range-separated optimized effective potential method based on a hybrid G\"orling-Levy-type MBPT-DFT model.
Abstract The theory of correlated electron systems is formulated in a form that allows the use as a reference point a density functional theory in the local density approximation (LDA DFT) for solids or molecules. The theory is constructed in two steps. As a first step, the total Hamiltonian is transformed into a correlated form. To elucidate the microscopic origin of the parameters of the periodic Hubbard–Anderson model (PHAM) the terms of the full Hamiltonian that have the operator structure of PHAM are separated. It is found that the matrix element of mixing interaction includes ion configuration‐ and number of particles‐dependent contributions from the Coulomb interaction. In a second step the diagram technique (DT) is developed by means of generalization of the Baym–Kadanoff method for correlated systems. The advantages of the method are that: (1) A nonorthogonal basis can be used, in particular the one generated by LDA DFT; (2) the equations for Green's functions (GFs) for the Fermi and Bose types of quasiparticles can be formulated in the form of a closed system of functional equations. The latter allows us to avoid the question of the nonunique decoupling procedure existing in previous versions of the DT and perform the expansion in terms of dressed GFs. Although the expressions for all interactions depend on the overlap matrix, it is shown that the theory is formally equivalent to one with orthogonal states with redefined interactions. When the PHAM is treated from the atomic‐limit side the vertexes are generated by kinematic interactions. The latter arise due to nontrivial commutation relations between X‐operators and come from the mixing, hopping, and overlap of states. The equations for GFs are derived within the nonorthogonal basis set in Hubbard‐I, one‐loop and random‐phase approximations with respect to kinematic interactions. The self‐consistent equation for “Hubbard Us” is derived. The technique developed is general, in particular its “bosonic” part can be used for description of spin systems with arbitrary anisotropy, systems with orbital ordering, or ordering of multipoles. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 113–143, 2003
We give a brief and basic introduction to perturbation theory. The main idea is to attempt to consider the situation of interest as a small perturbation of a simpler situation (which can be understood completely), and in particular to consider a system with a weak interaction as a perturbation of a non-interacting system. We develop the interaction picture, which allows approximating the time-evolution of an interacting system by the partial sums of the Dyson series, a fundamental tool for the sequel. We illustrate these ideas on a rudimentary model of the interaction of electrons and “photons”.
Abstract One of the great achievements of the Schrödinger wave-mechanics is the elegance of its perturbation theory, which has brought many problems, formerly considered intractable, within the range of a highly-developed mathematical technique. It is not necessary at this stage to review the numerous applications which have been made of this perturbation theory or to dwell upon its many advantages. The important advance towards an understanding of chemical forces which it has made possible is in itself a considerable achievement. There are, however, certain disadvantages in the perturbation theory in its present form, which limit the extent of its applications to complex problems of atomic and molecular structure. If the interaction of atoms, for instance, is to be calculated, as it most desirable, improved methods will have to be found.
Quantum chemistry plays an important role in elucidating molecular geometries, electronic states, and reaction mechanisms, because of the developments of a variety of theoretical methods, such as Hartree-Fock (HF), Møler-Plesset (MP) perturbation, configuration interaction (CI), coupled-cluster (CC), and density functional theory (DFT) methods. Electronic structure calculations have been carried out by not only theoretical chemists but also experimental chemists. DFT is currently most widely used to investigate large molecules in the ground state as well as small molecules because of the low computational cost. However, the generally used functionals fail to describe correctly non-covalent interactions that are important for host-guest molecules, self-assembly, and molecular recognition, and they tend to underestimate reaction barriers. Many attempts have been made to develop new functionals and add semiempirical or empirical correction terms to standard functionals, but no generally accepted DFT method has emerged yet. Second-order Møler-Plesset perturbation theory (MP2) is the simplest method that includes electron correlation important for non-covalent interactions and reaction barriers nonempirically. However, the computational cost of MP2 is considerably higher than that of DFT. In addition, much larger sizes of fast memory and hard disk are required in MP2 calculations. These make MP2 calculations increasingly difficult for larger molecules. Since workstation or personal computer (PC) clusters have become popular for quantum chemistry calculations, an efficient parallel calculation is a solution of the problem. Therefore, new parallel algorithms for MP2 energy and gradient calculations are presented in this thesis. Furthermore, an efficient algorithm for the generation of two-electron repulsion integrals (ERIs) which is important in quantum chemistry calculations is also presented. For the calculations of excited states, different approaches are required: for example, CI, multi-configuration self-consistent field (MCSCF), time-dependent DFT (TDDFT), and symmetry adapted cluster (SAC)/SAC-CI methods. One of the most accurate methods is SAC/SAC-CI, as demonstrated for many molecules. In this thesis, SAC/SAC-CI calculations of ground, ionized, and excited states are presented. This thesis consists of five chapters: a new algorithm of two-electron repulsion integral calculations (Chapter I), a new parallel algorithm of MP2 energy calculations (Chapter II), a new parallel algorithm of MP2 energy gradient calculations (Chapter III), applications of MP2 calculations (Chapter IV), and SAC/SAC-CI calculations of ionized and excited states (Chapter V). In quantum chemistry calculations, the generation of ERIs is one of the most basic subjects and is the most time-consuming step especially in direct SCF calculations. Many algorithms have been developed to reduce the computational cost. In Pople-Hehre algorithm, Cartesian axes are rotated to make several coordinate components zero or constant, so that these components are skipped in the generation of ERIs. In McMurchie-Davidson algorithm, ERIs are generated from (ss|ss) type integrals using a recurrence relation derived from Hermite polynomials. By combining these two algorithms, a new algorithm is developed in Chapter I. The results show that the new algorithm reduces the computational cost by 10 - 40%, as compared with the original algorithms. It is notable that the generation of ERIs including d functions is considerably fast. The program implemented officially in GAMESS in 2004 has been used all over the world. In quantum mechanics, perturbation methods can be used for adding corrections to reference solutions. In the MP perturbation method, a sum over Fock operators is used as the reference term, and the exact two-electron repulsion operator minus twice the average two-electron repulsion operator is used as the perturbation term. It is the advantage that the MP perturbation method is size consistent and size extensive, unlike truncated CI methods. The zero-order wave function is the HF Slater determinant, and the zero-order energy is expressed as a sum of occupied molecular orbital (MO) energies. The first-order perturbation is the correction for the overcounting of two-electron repulsions at zero-order, and the first-order energy corresponds to the HF energy. The MP correlation starts at second-order. In general, second-order (MP2) accounts for 80 - 90% of electron correlation. Therefore, MP2 is focused in this thesis since it is applicable to large molecules with considerable reliability and low computational cost. The formal computational scaling of MP2 energy calculations with respect to molecular size is fifth order, much higher than that of DFT energy calculations. Therefore, less expensive methods, such as Local MP2, density fitting (resolution of identity, RI) MP2, and Laplace Transform MP2, have been developed. However, all of these methods include approximations or cut-offs that need to be checked against full MP2 energies. An alternative approach to reduce the computational cost is to parallelize MP2 energy calculations. A number of papers on parallel MP2 energy calculations have been published. Almost all of them are based on simple parallelization methods that distribute only atomic orbital (AO) or MO indices to each processor. These methods have a disadvantage since intermediate integrals are broadcasted to all CPUs or the same AO ERIs are generated in all processors. Baker and Pulay developed a new parallel algorithm using SaebøAlmlöf integral transformation method. This algorithm parallelizes the first half transformation by AO indices and the second half transformation by MO indices. The advantages are that the total amount of network communication is independent of the number of processors and the AO integrals are generated only once. The disadvantage is the I/O overhead for the sorting of half-transformed integrals. A new parallel algorithm for MP2 energy calculations based on the two-step parallelization idea is presented in Chapter II. In this algorithm, AO indices are distributed in the AO integral generation and the first three quarter transformation, and MO indices are distributed in the last quarter transformation and MP2 energy calculation. Because the algorithm makes the sorting of intermediate integrals very simple, the parallel efficiency is highly improved and the I/O overhead is removed. Furthermore, the algorithm reduces highly the floating point operation (FLOP) count as well as the required memory and hard disk space, in comparison with other algorithms. Test calculations of taxol (C47H51NO14) and luciferin (C11H8N2O3S2) were performed on a cluster of Pentium 4 computers connected by gigabit Ethernet. The parallel scaling of the developed code is excellent up to the largest number of processors we have tested. For instance, the elapsed time for the MP2 energy calculations on 16 processors is on average 15.4 times faster than that on the single-processor. Determination of molecular geometries and reaction paths is a fundamental task in quantum chemistry and requires energy gradients with respect to nuclear coordinates. In Chapter III, a new parallel algorithm for MP2 energy gradient calculations is presented. The algorithm consists of 5 steps, the integral transformation, the MP2 amplitude calculation, the MP2 Lagrangian calculation, the coupled-perturbed HF calculation, and the integral derivative calculation. All steps are parallelized by distributing AO or MO indices. The algorithm also reduces the FLOP count, the required memory, and hard disk space. Test calculations of MP2 energy gradients were performed for taxol and luciferin on a cluster of Pentium 4 computers. The speedups are very good up to 80 CPU cores we have tested. For instance, the speedup ratios are 28.2 - 33.0 on 32 processors, corresponding to 88% - 103% of linear speedup. This indicates the high parallel efficiency of the present algorithm. The calculation of taxol with 6-31G(d) (1032 contracted basis functions) finishes within 2 hours on 32 processors, which requires only 1.8GB memory and 13.4GB hard disk per processor. Therefore, geometry optimization of molecules with 1000 basis functions can be easily performed using standard PC clusters. In Chapter IV, several applications of MP2 are performed using the program developed in Chapters II and III. Some molecules that DFT cannot treat well are optimized at the MP2 level. Geometry optimization is also carried out using the spin-component scaled (SCS) MP2 method. In this method, a different scaling is employed for the same and opposite spin components of the MP2 energy, so that SCS-MP2 performs as well as the much more costly CCSD(T) method at a high level of theory. SAC theory is developed for ground states and based on CC theory that describes higher-order electron correlation. The main factor of electron correlation is collisions of two electrons. In CC theory, most collisions of four electrons can be taken in as the product of collisions of tw