The algorithms discussed in Chapter 21 rely on having isolated systems to store information. In practical applications this is not possible, and the environment interacts with the systems causing decoherence. Suppose the data is contained in the state |x〉, and the environment is described by |E〉. The initial state of the entire system is described by the tensor product of the states |X〉⊗|E〉, which evolves according to some unitary operation U. The state |x〉 evolves according to the unitary operation U x which describes the algorithm. In classical error correction codes, all that needs to be corrected are bit flips (see Chapter 10). In the quantum case errors such as bit flips, phase changes and rotations complicate the error correction techniques. Since arbitrary errors in an encoding of information cannot be corrected, only certain types of errors are assumed to occur (this was also the case in classical error correction, where an upper bound in the number of bits that could be flipped in a transmission was assumed). The types of errors depend on the implementation. For example, suppose the types of errors (which we assume are distinguishable due to an encoding) are described by the unitary basis E 1,...E n , so that all errors are a linear combination [138] E = al.E 1 + ... + a n E n ,...E † E = I.
The algorithms discussed in Chapter 21 rely on having isolated systems to store information. In practical applications this is not possible, and the environment interacts with the systems causing decoherence. Suppose the data is contained in the state |x〉, and the environment is described by |E〉. The initial state of the entire system is described by the tensor product of the states |X〉⊗|E〉, which evolves according to some unitary operation U. The state |x〉 evolves according to the unitary operation U x which describes the algorithm. In classical error correction codes, all that needs to be corrected are bit flips (see Chapter 10). In the quantum case errors such as bit flips, phase changes and rotations complicate the error correction techniques. Since arbitrary errors in an encoding of information cannot be corrected, only certain types of errors are assumed to occur (this was also the case in classical error correction, where an upper bound in the number of bits that could be flipped in a transmission was assumed). The types of errors depend on the implementation. For example, suppose the types of errors (which we assume are distinguishable due to an encoding) are described by the unitary basis E 1,...E n , so that all errors are a linear combination [138] E = al.E 1 + ... + a n E n ,...E † E = I.
In Chapter 4 we introduced different quantum gates and quantum circuits and in Chapter 5 we described several quantum algorithms. So far the analysis of the algorithms and the circuits has been made with the assumption that the required unitary operations can be implemented exactly without any error. This is an abstraction. In an actual physical system that implements a quantum algorithm or a quantum circuit there are several sources of errors. The situation is similar in classical computation and to circumvent this problem error correcting codes are used in classical digital computing. Since qubits are more delicate and more susceptible to errors we need to introduce quantum error correcting codes. It is very important, as without such codes it will not be possible to build a scalable quantum computer. Such quantum error correcting codes are introduced in this chapter. However, we will not limit ourselves to the discussion of error correcting codes alone. We will also discuss more general aspects of errors and error correction, like decoherence, decoherence free subspace and fault-tolerance.
Quantum error correction is the art of protecting quantum states from the detrimental influence from the environment. To master this art, one must understand how the system interacts with the environment and gives rise to a full set of quantum phenomena, many of which have no correspondence in classical information theory. Such phenomena include decoherence, an effect that in general destroys superpositions of pure states as a consequence of entanglement with the environment. But decoherence can also be understood as “information leakage”, i.e., when knowledge of an encoded code block is transferred to the environment. In this event, the block’s information or entanglement content is typically lost.In a typical scenario, however, not all types of destructive events are likely to occur, but only those allowed by the information carrier, the type of interaction with the environment, and how the environment “picks up” information of the error events. These characteristics can be incorporated into a code, i.e., a channel-adapted quantum error-correcting code.Often, it is assumed that the environment’s ability to distinguish between error events is small, and I will denote such environments “memory-less”. But this assumption is not always valid, since the ability to distinguish error events is related to the temperature of the environment, and in the particular case of information coded onto photons, kBTR «ℏω typically holds, and one must then assume that the environment has a “memory”. In the thesis I describe a short quantum error-correction code adapted for photons interacting with a “cold” reservoir, i.e., a reservoir which continuously probes what error occurred in the coded state.I also study other types of environments, and show how to distill meaningful figures of merit from codes adapted for these channels, as it turns out that resource-based figures reflecting both information and entanglement can be calculated exactly for a well-studied class of channels: the Pauli channels. Starting from these resource-based figures, I establish the notion of efficiency and quality and show that there will be a trade-off between efficiency and quality for short codes. Finally I show how to incorporate, into these calculations, the choices one has to make when handling quantum states that have been detected as incorrect, but where no prospect of correcting them exists, i.e., so-called detection errors.
In the preceding chapter we mentioned the inevitable errors that occur when one tries to send quantum signals over, say, an optical fiber, even when there is no eavesdropper. But errors in transmission are not a problem just for quantum cryptography. For this entire chapter we forget about sending quantum information and instead focus on simply transmitting ordinary data faithfully over some kind of channel. Moreover, we assume that the data either is not sensitive or has already been encrypted. Unfortunately, many methods for transmitting data are susceptible to outside influences that can cause errors. How do we protect information from these errors? Error-correcting codes provide a mathematical method of not only detecting these errors, but also correcting them. Nowadays error-correcting codes are ubiquitous; they are used, for example, in cell-phone transmissions and satellite links, in the representation of music on a compact disk, and even in the bar codes in grocery stores.
This chapter discusses quantum noise and techniques for quantum error correction, a necessity for quantum computing. It discusses bit-flip errors, phase-flip errors, and their combination. The formalism of quantum operations is introduced, along with the operator-sum representation, and Krauss operators. With this, the chapter discusses the depolarization channel and imprecise gates, as well as (briefly) amplitude and phase damping. For error correction, repetition codes are introduced to motivate Shor’s 9-qubit error correction technique.
The field of quantum computing holds immense promise for solving complex problems that are currently intractable for classical computers. However, the practical realization of quantum computers faces a critical challenge: the inherent fragility of qubits, the fundamental units of quantum information. Quantum systems are susceptible to various types of errors and decoherence due to their interaction with the surrounding environment, which can lead to a rapid degradation of quantum information. This chapter delves into the pivotal aspect of quantum error correction techniques as a means to mitigate the adverse effects of errors and decoherence in quantum computing systems. Begins by elucidating the theoretical foundations of quantum error correction, exploring the principles that underlie the encoding of quantum information into larger, redundant codes that are resilient to errors. A comprehensive overview of prominent quantum error correction codes, such as the stabilizer codes and topological codes, is provided, along with a discussion of their respective strengths and limitations.
Quantum computing exists at the intersection of mathematics, physics, chemistry, and engineering; the main goal of quantum computing is the creation of devices and algorithms which use the properties of quantum mechanics to store, manipulate and measure information. There exist many families of algorithms, which, using non-classical logical operations, can outperform traditional, classical algorithms in terms of memory and processing requirements. In addition, quantum computing devices are fundamentally smaller than classical processors and memory elements; since the physical models governing their performance are applicable on all scales, as opposed to classical logic elements, whose underlying principles rely on the macroscopic nature of the device in question. \n \nQuantum algorithms, for the most part, are predicated on a theory of resources. It is often assumed that quantum computers can be placed in a precise fiducial state prior to computation, and that logical operations are perfect, inducing no error on the system which they affect. These assumptions greatly simplify algorithmic design, but are fundamentally unrealistic. In order to justify their use, it is necessary to develop a framework for using a large number of imperfect devices to simulate the action of a perfect device, with some acceptable probability of failure. This is the study of fault-tolerant quantum computing. In order to pursue this study effectively, it is necessary to understand the fundamental nature of generic quantum states and operations, as well as the means by which one can correct quantum errors. Additionally, it is important to attempt to minimize the use of computational resources in achieving error reduction and fault-tolerant computing. \n \nThis thesis is concerned with three projects related to the use of error-prone quantum systems to transmit and manipulate information. The first of these is concerned with the use of imperfectly-prepared states in error-correction routines. Using optimal quantum error correction, we are able to deduce a method of partially protecting encoded quantum information against preparation errors prior to encoding, using no additional qubits. The second of these projects details the search for entangled states which can be used to transmit classical information over quantum channels at a rate superior to classical states. The third of these projects concerns the transcoding of data from one quantum code into another using few ancillary resources. The descriptions of these projects are preceded by a brief introduction to representations of quantum states and channels, for completeness. \n \nThree techniques of general interest are presented in appendices. The first is an introduction to, and a minor advance in the development of optimal error correction codes. The second is a more efficient means of calculating the action of a quantum channel on a given state, given that the channel acts non-trivially only on a subsystem, rather than the entire system. Finally, we include documentation on a software package developed to aid the search for quantum transcoding operations.