Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Scaling ion traps for quantum computing

Hermann Uys, Jason Amini, Janus H. Wesenberg, Signe Louise Seidelin, J. Britton, J. J. Bollinger, Dietrich G. Leibfried, C. Ospelkaus, Aaron P. van Devender, David J. Wineland

Published Sep 1, 2010• 0 citations
OpenAlex

Abstract

The design, fabrication and preliminary testing of a chipscale, multi-zone, surface electrode ion trap is reported. The modular design and fabrication techniques used are anticipated to advance scalability of ion trap quantum computing architectures. 1. Summary

Related papers

Fabrication and Characterization of Surface Electrode Ion Trap for Quantum Computing

Jing Tao, Nam Piau Chew, Luca Guidoni +3 more

Ion trap is a promising approach to realizing scalable quantum computer as it presents high coherence time. Silicon, due to its manufacturability, is being considered as a potential substrate to fabricate complex ion-trap designs towards trap miniaturization and on-chip integration of electronics and optics. However, Si ion traps need proper structural design to reduce the substrate RF loss. In this paper, high-resistivity Si substrate materials has been utilized to fabricate surface electrode ion trap. Its DC and RF properties has been investigated and compared to the ion trap fabricated on sapphire substrate, which is one of the most established substrate material for trap fabrication.

IEEE Electronics Packaging Technology Conference (EPTC)•Dec 1, 2018•10 citations

An Embedded Microwave Structure for Scalable Trapped Ion Quantum Computing

Georg Frederik Riemschneider, Nico Weiß, Marvin Jaeger +3 more

This paper presents a microwave structure for local microwave coupling in trapped ion quantum computing. The structure is suitable for the scalable architecture of a quantum charge-coupled device (QCCD). It can be embedded into a surface ion trap chip utilizing a multi-layer stack for vertical integration. The microwave structure does not disturb the surface electrodes for ion trapping and ion shuttling to adjacent trapping zones. An internal line resonator increases the coupling efficiency. A chip-scale design shows a simulated crosstalk of -50dB in a QCCD-similar configuration. This is demonstrated by fabrication and measurement of an up-scaled PCB demonstrator.

European Microwave Conference (EuMC)•Oct 1, 2026•0 citations

(Invited) Ion Trap Quantum Computing: A New Computing Regime

Manas Mukherjee, Tarun Dutta, Noah Van Horne +4 more

Quantum computer is fast maturing from its infancy. Among different quantum computing platforms, ion trap quantum computer holds promise of both scalability as well as low error rate. In the following, a brief review of the field will be provided along with its present status and the future challenges.

ECS Transactions•Jul 20, 2018•1 citation

Chip-scale technology for high-performance and scalable trapped-ion quantum computer systems

Jeremy Sage

In this presentation, I will discuss efforts in the quantum community and at IonQ to develop chip-scale technology to enable higher-performance and more scalable trapped-ion quantum computer systems. The presentation will focus on the benefits and challenges of using this technology today and in the future, and on approaches to ensure successful integration of new quantum technology into commercial quantum computer systems.

SPIE Quantum Information Science, Sensing, and Computation•Jun 7, 2024•0 citations

The development of microfabricated ion traps towards quantum information and simulation

Marcus Hughes

Trapped ions within Paul traps have shown to be a promising architecture in the realisation of a quantum information processor together with the ability of providing quantum simulations. Linear Paul traps have demonstrated long coherence times with ions being well isolated from the environment, single and multi-qubit gates and the high fidelity detection of states. The scalability to large number of qubits, incorporating all the previous achievements requires an array of linear ion traps. Microfabrication techniques allow for fabrication and micron level accuracy of the trap electrode dimensions through photolithography techniques. The first part of this thesis presents the experiential setup and trapping of Yb+ ions needed to test large ion trap arrays. This include vacuum systems that can host advanced symmetric and asymmetric ion traps with up to 90 static voltage control electrodes. Demonstration of a single trapped Yb+ ion within a two-layer macroscopic ion trap is presented. with an ion-electrode distance of 310(10) µm. The anomalous heating rate and spectral noise density of the trap was measured, a main form of decoherence within ion traps. The second half of this thesis presents the design and fabrication of multi-layer asymmetric ion traps. This allows for isolated electrodes that cannot be accessed via surface pathways, allowing for higher density of electrodes as well as creating novel trap designs that allow for the potential of quantum simulations to be demonstrated. These include two-dimensional lattices and ring trap designs in which the isolated electrodes provide more control in the ion position. For the microfabrication of these traps I present a novel high-aspect ratio electroplated electrode design that provides shielding of the dielectric layer. This provides a means to mitigate stray electric field due to charge build up on the dielectric surfaces. Electrical testing of the trap structures was performed to test bulk breakdown and surface flashover of the ion trap architectures. Results showed sufficient isolation between electrodes for both radio frequency and static breakdown. Surface flashover voltage measurements over the dielectric layer showed an improvement of more than double over previous results using a new fabrication technique. This will allow for more powerful ion trap chips needed for the next generation of microfabricated ion trap arrays for scalable quantum technologies.

•Jun 16, 2013•0 citations

Prospects for Quantum Computation with Trapped Ions

Richard Hughes, Daniel F. V. James

A brief survey of the requirements for quantum computational hardware, and an overview of the ion trap quantum computation project at Los Alamos are presented. The physical limitations to quantum computation with trapped ions are discussed.

Fortschritte der Physik•Nov 1, 1998•1 citation
Ion trap is a promising approach to realizing scalable quantum computer as it presents high coherence time. Silicon, due to its manufacturability, is being considered as a potential substrate to fabricate complex ion-trap designs towards trap miniaturization and on-chip integration of electronics and optics. However, Si ion traps need proper structural design to reduce the substrate RF loss. In this paper, high-resistivity Si substrate materials has been utilized to fabricate surface electrode ion trap. Its DC and RF properties has been investigated and compared to the ion trap fabricated on sapphire substrate, which is one of the most established substrate material for trap fabrication.
This paper presents a microwave structure for local microwave coupling in trapped ion quantum computing. The structure is suitable for the scalable architecture of a quantum charge-coupled device (QCCD). It can be embedded into a surface ion trap chip utilizing a multi-layer stack for vertical integration. The microwave structure does not disturb the surface electrodes for ion trapping and ion shuttling to adjacent trapping zones. An internal line resonator increases the coupling efficiency. A chip-scale design shows a simulated crosstalk of -50dB in a QCCD-similar configuration. This is demonstrated by fabrication and measurement of an up-scaled PCB demonstrator.
Trapped ions within Paul traps have shown to be a promising architecture in the realisation of a quantum information processor together with the ability of providing quantum simulations. Linear Paul traps have demonstrated long coherence times with ions being well isolated from the environment, single and multi-qubit gates and the high fidelity detection of states. The scalability to large number of qubits, incorporating all the previous achievements requires an array of linear ion traps. Microfabrication techniques allow for fabrication and micron level accuracy of the trap electrode dimensions through photolithography techniques. The first part of this thesis presents the experiential setup and trapping of Yb+ ions needed to test large ion trap arrays. This include vacuum systems that can host advanced symmetric and asymmetric ion traps with up to 90 static voltage control electrodes. Demonstration of a single trapped Yb+ ion within a two-layer macroscopic ion trap is presented. with an ion-electrode distance of 310(10) µm. The anomalous heating rate and spectral noise density of the trap was measured, a main form of decoherence within ion traps. The second half of this thesis presents the design and fabrication of multi-layer asymmetric ion traps. This allows for isolated electrodes that cannot be accessed via surface pathways, allowing for higher density of electrodes as well as creating novel trap designs that allow for the potential of quantum simulations to be demonstrated. These include two-dimensional lattices and ring trap designs in which the isolated electrodes provide more control in the ion position. For the microfabrication of these traps I present a novel high-aspect ratio electroplated electrode design that provides shielding of the dielectric layer. This provides a means to mitigate stray electric field due to charge build up on the dielectric surfaces. Electrical testing of the trap structures was performed to test bulk breakdown and surface flashover of the ion trap architectures. Results showed sufficient isolation between electrodes for both radio frequency and static breakdown. Surface flashover voltage measurements over the dielectric layer showed an improvement of more than double over previous results using a new fabrication technique. This will allow for more powerful ion trap chips needed for the next generation of microfabricated ion trap arrays for scalable quantum technologies.