Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physics Procedia

Quantum Interference in DC-SQUIDs Comprising Two Sub-Micron Aluminum Josephson Junctions: Deviation from Classical Model

Kōji Miura, Kento Kikuchi, Hiroshi Shimada, Yoshinao Mizugaki

Published Jan 1, 2015• 0 citations
Publisher

Abstract

In a small Josephson junction, the critical current is often found experimentally to be smaller than the value expected fromthe Ambegaokar-Baratoff theory because of the quantum phase fluctuations. We also observed in our previous study that the quantum interference in a dc-SQUID comprising sub-micron Al junctions deviated from the classical model. In this work, we have fabricated 13devices having different values of maximal critical currents, and evaluated their quantum interference patterns.The quantum interference of 12among 13 devices has deviated from the classical model. It is confirmed that their maximal critical currents(Icsq,max) are reduced from the values (Icsq0) predicted by the Ambegaokar-Baratofftheory. Besides, the quantum interference for Icsq,max / Icsq0< 0.4 agrees with themodified quantum-interference model.

DOI
10.1016/j.phpro.2015.05.104

Related papers

C-8-3 Effects of Charging Energy on Quantum Interference Pattern of DC-SQUID Comprising Two Sub-Micron Aluminum Josephson Junctions

Yoshinao Mizugaki, Kento Kikuchi, Hiroshi Shimada

Proceedings of the Society Conference of IEICE•Aug 28, 2012•0 citations

CRITICAL CURRENT DEPENDENCE OF STACKED JOSEPHSON JUNCTIONS DC SQUID IN Bi 2 Sr 2 CaCu 2 O 8+Δ

Sang‐Jae Kim

We investigate critical current (Ic) modulation of stacked Josephson junctions (SJJs) dc superconducting quantum interference device ( dc SQUID) on a Bi 2 Sr 2 CaCu 2 O 8+δ ( Bi -2212) whisker. A coupled SJJs with a completely perforated hole of 0.1 μ m × 0.2 μ m were fabricated by using a 3-D focused-ion-beam (FIB) etching method. Those dc SQUIDs exhibited uniform multi-branch structures and clearly oscillated critical current under external magnetic fields (He). With applying He, the clear periodic modulation patterns of Ic are obtained and well fitted to the calculated value from the loop area of 0.02 μm2.

International Journal of Modern Physics B•Jul 30, 2007•1 citation

dc SQUID Phase Qubit

Tauno Palomaki

This thesis examines the behavior of dc SQUID phase qubits in terms of their proposed use in a quantum computer. In a phase qubit, the two lowest energy states (n=0 and n=1) of a current-biased Josephson junction form the qubit states, with the gauge invariant phase difference across the junction being relatively well defined. In a dc SQUID phase qubit, the Josephson junction is isolated from the environment using an inductive isolation network and Josephson junction, which are connected across the phase qubit junction to form a dc SQUID. Five dc SQUID phase qubits were examined at temperatures down to 25 mK. Three of the devices had qubit junctions that were Nb/AlOx/Nb junctions with critical currents of roughly 30 microamps. The other two had Al/AlOx/Al junctions with critical currents of roughly 1.3 microamps. The device that had the best performance was an Al/AlOx/Al device with a relaxation time of 30 ns and a coherence time of 24 ns. The devices were characterized using microwave spectroscopy, Rabi oscillations, relaxation and Ramsey fringe measurements. I was also able to see coupling between two Nb/AlOx/Nb dc SQUID phase qubits and perform Rabi oscillations with them. The Nb/AlOx/Nb devices had a relaxation time and coherence time that were half that of the Al/AlOx/Al device. One of the goals of this work was to understand the nature of parasitic quantum systems (TLSs) that interact with the qubit. Coupling between a TLS and a qubit causes an avoided level crossing in the transition spectrum of the qubit. In the Al/AlOx/Al devices unintentional avoided level crossings were visible with sizes up to 240 MHz, although most visible splittings were of order ~20 MHz. The measured spectra were compared to a model of the avoided level crossing based on the TLSs coupling to the junction, through either the critical current or the voltage across the junction.

•Aug 6, 2008•2 citations

Hot phonon controlled-junction superconducting quantum interference device

G. D. Hutchinson, H Qin, Dae Joon Kang +4 more

The optimal design of a direct current superconducting quantum interference device (DC-SQUID) with high sensitivity requires two identical Josephson junctions, which is difficult to achieve. The design of a DC-SQUID using controlled Josephson junction technology provides a mechanism for modifying the characteristics of the device. Here we report on the nano-fabrication and measurement of a DC-SQUID utilizing two Dayem bridge weak-link Josephson junctions fabricated with a width ∼100 nm and a length of ∼200 nm. These junctions are controlled via the irradiation of hot phonons from nearby titanium/chromium normal metal constrictions which are current biased. The devices were measured at a temperature of 4.2 K and control over the critical current oscillations was observed.

Superconductor Science and Technology•Nov 13, 2003•2 citations

Stray capacitance effect in superconducting quantum interferometers

Roberto Leoni, P. Carelli, Vittorio Foglietti

The experimental results obtained with low noise dc superconducting quantum interference devices (dc-SQUIDs) are sometimes not well understood. In particular, when the critical current is high, very irregular voltage versus flux characteristics can be measured. On the other hand, when the critical current is low, the characteristics follow perfectly the resistively shunted junction model. We have studied the dynamics of a dc-SQUID in the presence of stray capacitance and shunting resistors imbalance. The equations describing a circuit model for this physical system are integrated numerically and the results are compared with voltage versus flux characteristics obtained from fabricated devices. We find that the theoretical analysis accounts very well for previously misunderstood experimental features of the dc-SQUID. This model can give more physical sense to the various regimes of behavior of the dc-SQUID giving more insight into the experimental results.

Journal of Applied Physics•Sep 1, 1988•6 citations

Controlled-junction superconducting quantum interference device via phonon injection

G. D. Hutchinson, Hua Qin, D. G. Hasko +2 more

The direct current superconducting quantum interference device (DC-SQUID), using controlled Josephson junction technology, provides a mechanism to modify the characteristics of the device post-fabrication. We report on the fabrication and measurement of a micron sized DC-SQUID using two Dayem bridge weak-link Josephson junctions with integrated “heaters.” The weak link critical current is controlled by hot phonons from the current biased titanium, normal metal heater. By using the heaters, control over the critical current oscillations of the SQUID was observed at 4.2K.

Applied Physics Letters•Dec 29, 2003•5 citations
In a small Josephson junction, the critical current is often found experimentally to be smaller than the value expected fromthe Ambegaokar-Baratoff theory because of the quantum phase fluctuations. We also observed in our previous study that the quantum interference in a dc-SQUID comprising sub-micron Al junctions deviated from the classical model. In this work, we have fabricated 13devices having different values of maximal critical currents, and evaluated their quantum interference patterns.The quantum interference of 12among 13 devices has deviated from the classical model. It is confirmed that their maximal critical currents(Icsq,max) are reduced from the values (Icsq0) predicted by the Ambegaokar-Baratofftheory. Besides, the quantum interference for Icsq,max / Icsq0< 0.4 agrees with themodified quantum-interference model.
We investigate critical current (Ic) modulation of stacked Josephson junctions (SJJs) dc superconducting quantum interference device ( dc SQUID) on a Bi 2 Sr 2 CaCu 2 O 8+δ ( Bi -2212) whisker. A coupled SJJs with a completely perforated hole of 0.1 μ m × 0.2 μ m were fabricated by using a 3-D focused-ion-beam (FIB) etching method. Those dc SQUIDs exhibited uniform multi-branch structures and clearly oscillated critical current under external magnetic fields (He). With applying He, the clear periodic modulation patterns of Ic are obtained and well fitted to the calculated value from the loop area of 0.02 μm2.
This thesis examines the behavior of dc SQUID phase qubits in terms of their proposed use in a quantum computer. In a phase qubit, the two lowest energy states (n=0 and n=1) of a current-biased Josephson junction form the qubit states, with the gauge invariant phase difference across the junction being relatively well defined. In a dc SQUID phase qubit, the Josephson junction is isolated from the environment using an inductive isolation network and Josephson junction, which are connected across the phase qubit junction to form a dc SQUID. Five dc SQUID phase qubits were examined at temperatures down to 25 mK. Three of the devices had qubit junctions that were Nb/AlOx/Nb junctions with critical currents of roughly 30 microamps. The other two had Al/AlOx/Al junctions with critical currents of roughly 1.3 microamps. The device that had the best performance was an Al/AlOx/Al device with a relaxation time of 30 ns and a coherence time of 24 ns. The devices were characterized using microwave spectroscopy, Rabi oscillations, relaxation and Ramsey fringe measurements. I was also able to see coupling between two Nb/AlOx/Nb dc SQUID phase qubits and perform Rabi oscillations with them. The Nb/AlOx/Nb devices had a relaxation time and coherence time that were half that of the Al/AlOx/Al device. One of the goals of this work was to understand the nature of parasitic quantum systems (TLSs) that interact with the qubit. Coupling between a TLS and a qubit causes an avoided level crossing in the transition spectrum of the qubit. In the Al/AlOx/Al devices unintentional avoided level crossings were visible with sizes up to 240 MHz, although most visible splittings were of order ~20 MHz. The measured spectra were compared to a model of the avoided level crossing based on the TLSs coupling to the junction, through either the critical current or the voltage across the junction.
The optimal design of a direct current superconducting quantum interference device (DC-SQUID) with high sensitivity requires two identical Josephson junctions, which is difficult to achieve. The design of a DC-SQUID using controlled Josephson junction technology provides a mechanism for modifying the characteristics of the device. Here we report on the nano-fabrication and measurement of a DC-SQUID utilizing two Dayem bridge weak-link Josephson junctions fabricated with a width ∼100 nm and a length of ∼200 nm. These junctions are controlled via the irradiation of hot phonons from nearby titanium/chromium normal metal constrictions which are current biased. The devices were measured at a temperature of 4.2 K and control over the critical current oscillations was observed.
The experimental results obtained with low noise dc superconducting quantum interference devices (dc-SQUIDs) are sometimes not well understood. In particular, when the critical current is high, very irregular voltage versus flux characteristics can be measured. On the other hand, when the critical current is low, the characteristics follow perfectly the resistively shunted junction model. We have studied the dynamics of a dc-SQUID in the presence of stray capacitance and shunting resistors imbalance. The equations describing a circuit model for this physical system are integrated numerically and the results are compared with voltage versus flux characteristics obtained from fabricated devices. We find that the theoretical analysis accounts very well for previously misunderstood experimental features of the dc-SQUID. This model can give more physical sense to the various regimes of behavior of the dc-SQUID giving more insight into the experimental results.
The direct current superconducting quantum interference device (DC-SQUID), using controlled Josephson junction technology, provides a mechanism to modify the characteristics of the device post-fabrication. We report on the fabrication and measurement of a micron sized DC-SQUID using two Dayem bridge weak-link Josephson junctions with integrated “heaters.” The weak link critical current is controlled by hot phonons from the current biased titanium, normal metal heater. By using the heaters, control over the critical current oscillations of the SQUID was observed at 4.2K.