Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

High-coherence light source for atom trapping and cooling

Silvana Palacios

Published Sep 6, 2012• 0 citations
OpenAlex

Abstract

[ANGLÈS] A master clock (frequency reference) for experiments related to cold and trapped rubidium atoms was developed. From a telecommunication fibre laser source at 1560 nm, frequency-doubling was optimized to obtain an ultranarrow linewidth (< 1 kHz) laser at 780 nm with power larger than 100 mW. Frequency-stabilization will implement an error signal resulting from modulation transfer spectroscopy.

Related papers

Llum d'alta coherència a 780nm per confinar i refredar àtoms de 87Rb

Palacios Álvarez, Silvana

[ANGLÈS] A master clock (frequency reference) for experiments related to cold and trapped rubidium atoms was developed. From a telecommunication fibre laser source at 1560 nm, frequency-doubling was optimized to obtain an ultranarrow linewidth (< 1 kHz) laser at 780 nm with power larger than 100 mW. Frequency-stabilization will implement an error signal resulting from modulation transfer spectroscopy.

•Sep 6, 2012•0 citations

Frequency Stabilization Technology of 1560 nm Fiber Laser Based on Rubidium Modulation Transfer Spectroscopy

Yang Bai, Jun Ruan, Dandan Liu +3 more

The modulation transfer spectroscopy (MTS) technique used to stabilize two different transition lines of rubidium, required for laser cooling of atoms, is investigated. The laser source is based on a 1560 nm semiconductor laser diode that is amplified by an erbium doped fiber amplifier (EDFA). The laser output is frequency doubled with a fiber coupled periodically poled Lithium Niobate (PPLN) crystal to 780 nm. To address the weak spectral features of repumping laser, a theoretical study is conducted followed by experimental verification. The 87Rb D2 line F = 1 → F' = 0 transition temperature-enhanced MTS signal is observed, which provides a choice to stabilize the repumping laser frquency on the F = 1 → F ' = 2 transition using frequency shifting with acousto-optic modulators (AOMs). Compared with the orignal MTS signal, this method is shown to be more stable and accurate for laser frequency locking. Laer frequency locking is realized by controlling the driving current of the seed laser using digital PID feedback. After locking, the laser linewidth is 35.36 kHz.

IEEE photonics journal•May 20, 2024•6 citations

Compact frequency standard at 1556 nm based on the two-photon transition in rubidium at 778 nm

Michel Poulin, Christine Latrasse, Driss Touahri +2 more

This is a progress report on the realization of a compact and transportable frequency standard at 1556 nm based on a two-photon transition in rubidium at 778 nm. These hyperfine transitions present great metrological interest. They have a narrow theoretical linewidth of 150 kHz when observed with a 1556 nm laser, and their absolute frequency is known with an uncertainty of 5.2 X 10-12. In this experiment, we use a high power 1556 nm DFB laser and reduce its linewidth to the 10 kHz level using optical feedback from a confocal cavity. We generate its second harmonic in a periodically poled LiNbO3 crystal and use this signal to injection-lock a Fabry-Perot laser emitting 42 mW at 778 nm. The slave laser is used to observe the Doppler-free two- photon transitions: two counter-propagating beams excite rubidium atoms which emit a blue fluorescence on resonance. This 420 nm light is detected on the side of the Rb cell with a photomultiplier. Such an optical frequency standard at 1556 nm, standing in the multiwavelength telecommunications systems window, becomes an attractive source for absolute frequency calibration of WDM components, optical spectrum analyzers and wavemeters.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 8, 1998•0 citations

An active optical frequency reference using a pulsed superradiant laser

Juan Muniz Silva, Julia Cline, James K. Thompson +1 more

We will describe a next-generation active atomic frequency reference based on super-radiant pulses of laser light from the ultra-narrow, 1 mHz linewidth, optical clock transition in an ensemble of cold 87Sr atoms. Light is stimulated from the millihertz linewidth transition by confining an ensemble of laser cooled atoms inside of a high finesse optical cavity. Such a light source has been proposed as a next-generation active atomic frequency reference, with the potential to enable high-precision optical frequency references to be used outside laboratory environments. We achieve a remarkable short term fractional frequency stability, 6.7 × 1016 at 1 s of averaging, absolute accuracy, 2 Hz (4 × 1015 fractional frequency), and high insensitivity to changes in the cavity length that limits the performance of todays more stable lasers. We will also discuss current work on cavity-enhanced dispersive measurements to perform high resolution spectroscopy and atom counting.

Optical and Quantum Sensing and Precision Metrology II•Mar 1, 2019•4 citations

Doppler-free modulation transfer spectroscopy of rubidium 52S1/2–62P1/2 transitions using a frequency-doubled diode laser blue-light source

Nobuhiko Ito

A frequency-doubled diode laser spectrometer in the blue-wavelength region with a continuous-frequency tuning range of up to ∼7 GHz has been developed, comprising a powerful fundamental light source based on a master/slave laser combination coupled with a KNbO3 crystal for second-harmonic generation in a power-enhancement cavity. It has been employed for the observation of saturated absorption spectra in 52S1/2–62P1/2 hyperfine transitions of atomic rubidium with the aid of a modulation transfer spectroscopic technique, and also the frequency stabilization to one of them has been demonstrated, suggesting the possibility of the establishment of a precision optical frequency marker in the blue range. A relative stability of better than 2.8×10−10 is estimated based on the locked error signal in the preliminary stabilization. With a further study of the frequency instability and uncertainty, in addition to supplementary improvements of apparatus, one may expect a realization of a stabilized laser in the blue-spectral domain. Details of the developed blue-light source are described and the demonstrated results of the rubidium spectroscopy are also described and discussed.

Review of Scientific Instruments•Jul 1, 2000•27 citations

Fibered laser system for rubidium laser cooling based on telecom technology at 1560 nm and frequency doubling

Fabien Lienhart, Salah Boussen, Olivier Carraz +3 more

A new laser system is developed to laser cool rubidium atoms based on frequency doubling of a 1560 nm fiber bench. The use of telecom components gives a reliable and compact system robust compare to environmental perturbations. The laser system is validated by realizing a rubidium magneto-optical trap and an optical molasses. The laser system should find applications for onboard cold atoms experiments like inertial captors or atomic clocks. It is concluded that this laser system can also address potassium atoms which have a laser cooling wavelength of 767 nm.

Conference on Lasers and Electro-Optics•May 1, 2007•0 citations
[ANGLÈS] A master clock (frequency reference) for experiments related to cold and trapped rubidium atoms was developed. From a telecommunication fibre laser source at 1560 nm, frequency-doubling was optimized to obtain an ultranarrow linewidth (< 1 kHz) laser at 780 nm with power larger than 100 mW. Frequency-stabilization will implement an error signal resulting from modulation transfer spectroscopy.
The modulation transfer spectroscopy (MTS) technique used to stabilize two different transition lines of rubidium, required for laser cooling of atoms, is investigated. The laser source is based on a 1560 nm semiconductor laser diode that is amplified by an erbium doped fiber amplifier (EDFA). The laser output is frequency doubled with a fiber coupled periodically poled Lithium Niobate (PPLN) crystal to 780 nm. To address the weak spectral features of repumping laser, a theoretical study is conducted followed by experimental verification. The 87Rb D2 line F = 1 → F' = 0 transition temperature-enhanced MTS signal is observed, which provides a choice to stabilize the repumping laser frquency on the F = 1 → F ' = 2 transition using frequency shifting with acousto-optic modulators (AOMs). Compared with the orignal MTS signal, this method is shown to be more stable and accurate for laser frequency locking. Laer frequency locking is realized by controlling the driving current of the seed laser using digital PID feedback. After locking, the laser linewidth is 35.36 kHz.
This is a progress report on the realization of a compact and transportable frequency standard at 1556 nm based on a two-photon transition in rubidium at 778 nm. These hyperfine transitions present great metrological interest. They have a narrow theoretical linewidth of 150 kHz when observed with a 1556 nm laser, and their absolute frequency is known with an uncertainty of 5.2 X 10-12. In this experiment, we use a high power 1556 nm DFB laser and reduce its linewidth to the 10 kHz level using optical feedback from a confocal cavity. We generate its second harmonic in a periodically poled LiNbO3 crystal and use this signal to injection-lock a Fabry-Perot laser emitting 42 mW at 778 nm. The slave laser is used to observe the Doppler-free two- photon transitions: two counter-propagating beams excite rubidium atoms which emit a blue fluorescence on resonance. This 420 nm light is detected on the side of the Rb cell with a photomultiplier. Such an optical frequency standard at 1556 nm, standing in the multiwavelength telecommunications systems window, becomes an attractive source for absolute frequency calibration of WDM components, optical spectrum analyzers and wavemeters.
We will describe a next-generation active atomic frequency reference based on super-radiant pulses of laser light from the ultra-narrow, 1 mHz linewidth, optical clock transition in an ensemble of cold 87Sr atoms. Light is stimulated from the millihertz linewidth transition by confining an ensemble of laser cooled atoms inside of a high finesse optical cavity. Such a light source has been proposed as a next-generation active atomic frequency reference, with the potential to enable high-precision optical frequency references to be used outside laboratory environments. We achieve a remarkable short term fractional frequency stability, 6.7 × 1016 at 1 s of averaging, absolute accuracy, 2 Hz (4 × 1015 fractional frequency), and high insensitivity to changes in the cavity length that limits the performance of todays more stable lasers. We will also discuss current work on cavity-enhanced dispersive measurements to perform high resolution spectroscopy and atom counting.
A frequency-doubled diode laser spectrometer in the blue-wavelength region with a continuous-frequency tuning range of up to ∼7 GHz has been developed, comprising a powerful fundamental light source based on a master/slave laser combination coupled with a KNbO3 crystal for second-harmonic generation in a power-enhancement cavity. It has been employed for the observation of saturated absorption spectra in 52S1/2–62P1/2 hyperfine transitions of atomic rubidium with the aid of a modulation transfer spectroscopic technique, and also the frequency stabilization to one of them has been demonstrated, suggesting the possibility of the establishment of a precision optical frequency marker in the blue range. A relative stability of better than 2.8×10−10 is estimated based on the locked error signal in the preliminary stabilization. With a further study of the frequency instability and uncertainty, in addition to supplementary improvements of apparatus, one may expect a realization of a stabilized laser in the blue-spectral domain. Details of the developed blue-light source are described and the demonstrated results of the rubidium spectroscopy are also described and discussed.
A new laser system is developed to laser cool rubidium atoms based on frequency doubling of a 1560 nm fiber bench. The use of telecom components gives a reliable and compact system robust compare to environmental perturbations. The laser system is validated by realizing a rubidium magneto-optical trap and an optical molasses. The laser system should find applications for onboard cold atoms experiments like inertial captors or atomic clocks. It is concluded that this laser system can also address potassium atoms which have a laser cooling wavelength of 767 nm.