Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

光谱学与光谱分析

[Energy-pooling collisions of rubidium atoms: Rb (5P(J)) + Rb (5P(J))--> Rb (5S) + Rb (nl = 5D,7S)].

穆保霞, 王淑英, 崔秀花, 张刚台, 袁强华, 戴康, 沈异凡

Published Sep 1, 2006• 1 citation
OpenAlex

Abstract

An experimental study of rubidium energy pooling collisions, Rb(5P(J)) + Rb(5P(J))-->Rb(nlJ') + Rb(5S), at thermal energies, was carried out in a cell. Atoms were excited to either the 5P 1/2 or 5P 3/2 state using a single-mode diode laser. The excited atom density and spatial distribution were mapped by monitoring the absorption of a counter-propagating single-mode diode laser beam, tuned to either 5P 1/2-->5D 3/2 or 5P 3/2-->7S 1/2 transition, which could be translated parallel to the pump beam. The excited atom densities were combined with the measured fluorescence ratios to determine cross sections for the rubidium energy pooling process. For 5P 3/2 excitation the cross sections for nlJ' being 5D 5/2, 5D 3/2, and 7S 1/2 are (1.32+/-0.59) x 10(-14), (1.18+/-0.53) x 10(-14) and (3. 21+/-1. 44) x 10(-15) cm2, respectively. For 5P 1/2 excitation the cross sections for nlJ' being 5D 5/2 and 5D 3/2 are (6.57+/-2.96) x 10(-15), and (5.90+/-2.66) x 10(-15) cm2, respectively. The results were compared with those of other experiments.

Related papers

Energy-Pooling Collisions in Rubidium: 5 P 3/2 +5 P 3/2 →5 S +( nl = 5 D ,7 S )

Shen Yi-Fan, Kang Dai, Baoxia Mu +2 more

We experimentally study rubidium energy pooling collisions of Rb(5 P 3/2 )+Rb(5 P 3/2 )→Rb(5 S 1/2 )+Rb ( nl J = 5 D J ,7 S 1/2 ) at low densities in a cell using diode laser excitation. The excited-atom density and spatial distribution are mapped by monitoring the absorption of a counterpropagating single-mode diode laser beam, tuned to the 5 P 3/2 →7 S 1/2 transition, which could be translated parallel to the pump beam. The excited atom densities are combined with measured fluorescence ratios to determine cross sections for the rubidium energy pooling process. The cross sections for nl J being 5 D 5/2 , 5 D 3/2 , and 7 S 1/2 are (1.32±0.59) × 10 −14 , (1.18±0.53) × 10 −14 and (3.21±1.44) × 10 −15 cm 2 , respectively.

Chinese Physics Letters•Oct 27, 2005•14 citations

Energy-pooling collisions in Rb-Cs vapor mixture Rb(5P_(J))+Cs(6P_(3/2))-->Rb(5S_(1/2))+Cs(nl_(J'))

Yifan Shen, Kang Dai, Baoxia Mu +2 more

Rate coefficients for energy-pooling (EP) collisions Rb(5P_(J))+Cs(6P_(3/2))-->Rb(5S_(1/2))+Cs(nl_(J')) have been measured. Atoms were excited to Rb(5P_(J)) and Cs(6P_(3/2)) states using two single-mode diode lasers. To isolate the heteronuclear contribution in the fluorescence spectrum, a double-modulation technique has been adopted. The excited-atom density and spatial distribution are mapped by monitoring the absorption of a counterpropagating single-mode diode laser beam, tuned to Rb(5P_(J)-->7S_(1/2)) and Cs(6P_(3/2)-->8S_(1/2)) transitions respectively, which could be translated parallelly to the pump beams. The excited atom densities are combined with the measured fluorescence ratios to determine cross sections for the EP processes. It was found that Rb(5P_(J))+Cs(6P_(3/2)) collisions are more efficient than Rb(5P_(3/2))+Cs(6P_(3/2)) collisions for populating Cs(4F_(5/2)), while the opposite is true for populating Cs(4F_(7/2)).

Chinese Optics Letters•Jan 1, 2006•0 citations

Energy-pooling collisions in rubidium:5P_J+5P_J′→5S+5D_J″

Yifan Shen

An experimental study of rubidium energy pooling collisions,5P_J+5P_J′→5S+5D_J″,at thermal energies,has been carried out in a cell.Atoms were excited to either the 5P_1/2 or 5P_3/2 state using a single-mode diode laser.The excited-atom density and spatial distribution were mapped by monitoring the absorption of a counterpropagating single-mode diode laser beam,tuned to either 5P_1/2→5D_3/2,5P_3/2→7S_1/2 transition,which could be translated parallel to the pump beam.The excited atom densities are combined with measured fluorescence ratios to determine cross sections for the rubidium energy pooling process 5P_J+5P_J′→5S+5D_J″.Two tunable cw diode lasers were used to excite 5P_1/2 and 5P_3/2 respectively and the 5D_J″→5P_J fluorescence intensities were measured.For 5P_3/2+5P_1/2 collisions the cross sections for 5D_5/2,5D_3/2 are(1.12±0.50)×10~-14 and(1.01±0.45)×10~-14 cm~2,respectively.

Journal of Atomic and Molecular Physics•Jan 1, 2006•0 citations

Resonant Reaction in Rb–Cs Vapour Mixture Rb(5 P 1/2 ) + Cs(6 P 3/2 ) → Cs(8 S 1/2 ) + Rb(5 S 1/2 )

Shen Yi-Fan, Kang Dai, Baoxia Mu +2 more

We experimentally study energy-pooling collision in the Rb–Cs vapour mixture at low densities in a cell. Atoms are excited to Rb(5 P 1/2 ) and Cs(6 P 3/2 ) states using two single-mode diode lasers. To isolate the heteronuclear contribution in the fluorescence spectrum, a double-modulation technique is adopted. The excited-atom density and spatial distribution are mapped by monitoring the absorption of a counterpropagating single-mode diode laser beam, tuned to Rb(5 P 1/2 →7 S 1/2 ) and Cs(6 P 3/2 →8 S 1/2 ) transitions, respectively, which could be translated parallel to the pump beams. The excited atom densities are combined with the measured fluorescence ratios to determine cross section for the energy-pooling process [i.e. Rb(5 P 1/2 ) + Cs (6 P 3/2 ) → Cs(8 S 1/2 ) + Rb (5 S 1/2 )]. The cross section is 3.79×10 −14 cm 2 ±45%.

Chinese Physics Letters•Apr 28, 2006•2 citations

Energy transfer in collisions between two Cs(5D) atoms

Yifan Shen

Using stepwise excitation of the cesium 8S atoms level in Cs vapor,several collisional and radiative processes have been identified from the intensities and spectra of the Cs fluorescence.The 5D state was populated by 8S→7P→5D transitions.In cesium densities 1016-1017?cm-3,the energy pooling collisions 5D+5D→nL+6S(nL=9D,11S,7F are studied.Since the 5D→6P(3.0-3.6 μm) fluorescence could not be detected with this experiment,the EP rate coefficients have been measured relative to the known rate coefficient of the collision,i.e.,6P+5D→6S+7D.The excited-atom density and spatial distribution were mapped by monitoring the absorption of a counterpropagating single-mode laser beam,tuned to 6P3/2→8S1/2 transition,which could be translated parallel to the pump beam.The excited atom densities are combined with measured fluorescene ratios to determine cross sections for the cesium energy pooling process.The average values(in units of 10-10?cm3s-1) for nL=9D,11S and 7F are 8.4±4.2,7.3±3.6,and 9.7±4.8,respectively.Influence on k11S and k7F of the energy transfer process 11S+6S7F+6S is also dicussed.

Journal of Atomic and Molecular Physics•Jan 1, 2007•0 citations

[Collisional energy transfer between excited Rb atoms].

Hongping Wu, Qi-cun Guo, Kang Dai +1 more

Energy pooling (EP) was observed in Rb vapor following pulsed optical excitation to the 5P1/2 state. The 5P3/2 state was populated by the energy transfer process: Rb(5P1/2)+Rb(5S1/2) --> Rb(5P3/2)+Rb(5Sl/2). The resulting densities of Rb atoms at the 5P1/2 level were obtained from the absorption of narrow spectral line from a Rb hollow cathode lamp, connecting the 5P1/2 state to 7S state. Since the effective lifetimes of the 5P1/2 and 5P3/2 states are approximately equal, the densities of the 5P3/2 level were obtained from the D2 to D1 fluorescence ratios where D1 and D2 are lines of the 5P1/2 --> 5S1/2 and 5P3/2 --> 5S1/2 transition. Because the time of the fine structure exchanging is much shorter than the lifetime of the 5D state, the fluorescence originating from the 5D state produced by the 5P1/2 + 5P3/2 and 5P3/2 + 5P3/2 processes follows the instantaneous production rate of the 5P1/2 + 5P1/2 process. It is clear that 5P/2 + 5P3/2 and 5P3/2 + 5P3/2 collisions can significantly influence the results obtained for the 5P1/2 + 5P1/2 rate since the energy defect for 5D state is much smaller for 5P1/2 + 5P3/2 and 5P3/2 + 5P3/2 collisions than for 5P1/2 + 5P1/2 collisions. Effective lifetimes of the 5P levels were calculated using radiation trapping theory. The time-integrated populations and signals were studied and analyzed. The resulting fluorescence included the direct component emitted in the decay of the optically excited 5P1/2 state and the sensitized component arising from the collisions for populating 5D state at different cell temperature. These relative intensities were combined with the measured excited atom densities to yield absolute energy-pooling rate coefficients. The cross sections (in units of 10(-14) cm2) for the energy-pooling collisions [i. e. , 5P1/2 + 5P1/2, 5P1/2 + 5P3/2, 5P3/2 + 5P3/2] are 0.78, 2.9 and 3.1, respectively. The dependence of the rates upon energy defect deltaE was examined, but the 5D3/2 level was approximately equally populated in 5P3/2 + 5P3/2 (deltaE = 68 cm(-1)) and 5P3/2 + 5P1/2 (deltaE = 306 cm(-1)) collisions. The 5P1/2 + 5P3/2 collisions are as efficient as 5P3/2 + 5P3/2 for populating 5D3/2 state.

•Aug 1, 2009•1 citation
An experimental study of rubidium energy pooling collisions, Rb(5P(J)) + Rb(5P(J))-->Rb(nlJ') + Rb(5S), at thermal energies, was carried out in a cell. Atoms were excited to either the 5P 1/2 or 5P 3/2 state using a single-mode diode laser. The excited atom density and spatial distribution were mapped by monitoring the absorption of a counter-propagating single-mode diode laser beam, tuned to either 5P 1/2-->5D 3/2 or 5P 3/2-->7S 1/2 transition, which could be translated parallel to the pump beam. The excited atom densities were combined with the measured fluorescence ratios to determine cross sections for the rubidium energy pooling process. For 5P 3/2 excitation the cross sections for nlJ' being 5D 5/2, 5D 3/2, and 7S 1/2 are (1.32+/-0.59) x 10(-14), (1.18+/-0.53) x 10(-14) and (3. 21+/-1. 44) x 10(-15) cm2, respectively. For 5P 1/2 excitation the cross sections for nlJ' being 5D 5/2 and 5D 3/2 are (6.57+/-2.96) x 10(-15), and (5.90+/-2.66) x 10(-15) cm2, respectively. The results were compared with those of other experiments.
We experimentally study rubidium energy pooling collisions of Rb(5 P 3/2 )+Rb(5 P 3/2 )→Rb(5 S 1/2 )+Rb ( nl J = 5 D J ,7 S 1/2 ) at low densities in a cell using diode laser excitation. The excited-atom density and spatial distribution are mapped by monitoring the absorption of a counterpropagating single-mode diode laser beam, tuned to the 5 P 3/2 →7 S 1/2 transition, which could be translated parallel to the pump beam. The excited atom densities are combined with measured fluorescence ratios to determine cross sections for the rubidium energy pooling process. The cross sections for nl J being 5 D 5/2 , 5 D 3/2 , and 7 S 1/2 are (1.32±0.59) × 10 −14 , (1.18±0.53) × 10 −14 and (3.21±1.44) × 10 −15 cm 2 , respectively.
Rate coefficients for energy-pooling (EP) collisions Rb(5P_(J))+Cs(6P_(3/2))-->Rb(5S_(1/2))+Cs(nl_(J')) have been measured. Atoms were excited to Rb(5P_(J)) and Cs(6P_(3/2)) states using two single-mode diode lasers. To isolate the heteronuclear contribution in the fluorescence spectrum, a double-modulation technique has been adopted. The excited-atom density and spatial distribution are mapped by monitoring the absorption of a counterpropagating single-mode diode laser beam, tuned to Rb(5P_(J)-->7S_(1/2)) and Cs(6P_(3/2)-->8S_(1/2)) transitions respectively, which could be translated parallelly to the pump beams. The excited atom densities are combined with the measured fluorescence ratios to determine cross sections for the EP processes. It was found that Rb(5P_(J))+Cs(6P_(3/2)) collisions are more efficient than Rb(5P_(3/2))+Cs(6P_(3/2)) collisions for populating Cs(4F_(5/2)), while the opposite is true for populating Cs(4F_(7/2)).
An experimental study of rubidium energy pooling collisions,5P_J+5P_J′→5S+5D_J″,at thermal energies,has been carried out in a cell.Atoms were excited to either the 5P_1/2 or 5P_3/2 state using a single-mode diode laser.The excited-atom density and spatial distribution were mapped by monitoring the absorption of a counterpropagating single-mode diode laser beam,tuned to either 5P_1/2→5D_3/2,5P_3/2→7S_1/2 transition,which could be translated parallel to the pump beam.The excited atom densities are combined with measured fluorescence ratios to determine cross sections for the rubidium energy pooling process 5P_J+5P_J′→5S+5D_J″.Two tunable cw diode lasers were used to excite 5P_1/2 and 5P_3/2 respectively and the 5D_J″→5P_J fluorescence intensities were measured.For 5P_3/2+5P_1/2 collisions the cross sections for 5D_5/2,5D_3/2 are(1.12±0.50)×10~-14 and(1.01±0.45)×10~-14 cm~2,respectively.
We experimentally study energy-pooling collision in the Rb–Cs vapour mixture at low densities in a cell. Atoms are excited to Rb(5 P 1/2 ) and Cs(6 P 3/2 ) states using two single-mode diode lasers. To isolate the heteronuclear contribution in the fluorescence spectrum, a double-modulation technique is adopted. The excited-atom density and spatial distribution are mapped by monitoring the absorption of a counterpropagating single-mode diode laser beam, tuned to Rb(5 P 1/2 →7 S 1/2 ) and Cs(6 P 3/2 →8 S 1/2 ) transitions, respectively, which could be translated parallel to the pump beams. The excited atom densities are combined with the measured fluorescence ratios to determine cross section for the energy-pooling process [i.e. Rb(5 P 1/2 ) + Cs (6 P 3/2 ) → Cs(8 S 1/2 ) + Rb (5 S 1/2 )]. The cross section is 3.79×10 −14 cm 2 ±45%.
Using stepwise excitation of the cesium 8S atoms level in Cs vapor,several collisional and radiative processes have been identified from the intensities and spectra of the Cs fluorescence.The 5D state was populated by 8S→7P→5D transitions.In cesium densities 1016-1017?cm-3,the energy pooling collisions 5D+5D→nL+6S(nL=9D,11S,7F are studied.Since the 5D→6P(3.0-3.6 μm) fluorescence could not be detected with this experiment,the EP rate coefficients have been measured relative to the known rate coefficient of the collision,i.e.,6P+5D→6S+7D.The excited-atom density and spatial distribution were mapped by monitoring the absorption of a counterpropagating single-mode laser beam,tuned to 6P3/2→8S1/2 transition,which could be translated parallel to the pump beam.The excited atom densities are combined with measured fluorescene ratios to determine cross sections for the cesium energy pooling process.The average values(in units of 10-10?cm3s-1) for nL=9D,11S and 7F are 8.4±4.2,7.3±3.6,and 9.7±4.8,respectively.Influence on k11S and k7F of the energy transfer process 11S+6S7F+6S is also dicussed.
Energy pooling (EP) was observed in Rb vapor following pulsed optical excitation to the 5P1/2 state. The 5P3/2 state was populated by the energy transfer process: Rb(5P1/2)+Rb(5S1/2) --> Rb(5P3/2)+Rb(5Sl/2). The resulting densities of Rb atoms at the 5P1/2 level were obtained from the absorption of narrow spectral line from a Rb hollow cathode lamp, connecting the 5P1/2 state to 7S state. Since the effective lifetimes of the 5P1/2 and 5P3/2 states are approximately equal, the densities of the 5P3/2 level were obtained from the D2 to D1 fluorescence ratios where D1 and D2 are lines of the 5P1/2 --> 5S1/2 and 5P3/2 --> 5S1/2 transition. Because the time of the fine structure exchanging is much shorter than the lifetime of the 5D state, the fluorescence originating from the 5D state produced by the 5P1/2 + 5P3/2 and 5P3/2 + 5P3/2 processes follows the instantaneous production rate of the 5P1/2 + 5P1/2 process. It is clear that 5P/2 + 5P3/2 and 5P3/2 + 5P3/2 collisions can significantly influence the results obtained for the 5P1/2 + 5P1/2 rate since the energy defect for 5D state is much smaller for 5P1/2 + 5P3/2 and 5P3/2 + 5P3/2 collisions than for 5P1/2 + 5P1/2 collisions. Effective lifetimes of the 5P levels were calculated using radiation trapping theory. The time-integrated populations and signals were studied and analyzed. The resulting fluorescence included the direct component emitted in the decay of the optically excited 5P1/2 state and the sensitized component arising from the collisions for populating 5D state at different cell temperature. These relative intensities were combined with the measured excited atom densities to yield absolute energy-pooling rate coefficients. The cross sections (in units of 10(-14) cm2) for the energy-pooling collisions [i. e. , 5P1/2 + 5P1/2, 5P1/2 + 5P3/2, 5P3/2 + 5P3/2] are 0.78, 2.9 and 3.1, respectively. The dependence of the rates upon energy defect deltaE was examined, but the 5D3/2 level was approximately equally populated in 5P3/2 + 5P3/2 (deltaE = 68 cm(-1)) and 5P3/2 + 5P1/2 (deltaE = 306 cm(-1)) collisions. The 5P1/2 + 5P3/2 collisions are as efficient as 5P3/2 + 5P3/2 for populating 5D3/2 state.