Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.15694

Optimization of Finite Alphabet Message Passing Decoding on Fully Node-Parallel Architectures for 5G LDPC Codes

Alexander von Bank, Oliver Griebel, Eike-Manuel Edelmann, Norbert Wehn, Laurent Schmalen

Published Nov 11, 2026• 0 citations
arXivHTMLPDF

Abstract

In this paper, we propose a novel design method for the lookup tables (LUTs) of the minimum reconstruction, computation, and quantization (min-RCQ) LDPC code decoding algorithm. The proposed design method uses Bayesian optimization and samples from a subspace of the design space. The novel design method does not require knowledge about the channel or the modulation format and uses the frame error rate (FER) as loss function. The design method is applicable to irregular low-density parity-check (LDPC) codes with puncturing and shortening. Furthermore, the design method creates a set of iteration-agnostic LUTs that can be used over all iterations, which makes this approach suitable for fully node-parallel decoder architectures. We show that our proposed approach achieves a 38.6 % better energy efficiency than a state-of-the-art normalized min-sum (NMS) decoder without loss in error correction performance.

DOI
10.48550/arxiv.2611.15694

Related papers

On irregular LDPC codes with quantized message passing decoding

Michael Meidlinger, Gerald Matz

Irregular low-density parity-check (LDPC) codes are among the best codes currently known. Unfortunately, the performance of existing codes may deteriorate substantially with practical finite-precision decoder implementations. This motivates us to extend our previous work on finite-alphabet decoders based on look-up tables (LUTs) to irregular LDPC codes. We devise a joint design of the LUTs used for different node degrees and present a strategy to optimize the degree distribution (DD) of the LDPC code under LUT decoding. Numerical simulations show that with 4-bit LUT decoding the resulting codes outperform state-of-the-art codes with floating point min-sum (MS) decoding.

IEEE International Workshop on Signal Processing Advances in Wireless Communications (SPAWC)•Jul 1, 2017•23 citations

Quantized message passing for LDPC codes

Michael Meidlinger, Alexios Balatsoukas‐Stimming, Andreas Peter Burg +1 more

We propose a quantized decoding algorithm for low- density parity-check codes where the variable node update rule of the standard min-sum algorithm is replaced with a look-up table (LUT) that is designed using an information-theoretic criterion. We show that even with message resolutions as low as 3 bits, the proposed algorithm can achieve better error rates than a floating-point min-sum decoder. Moreover, we study in detail the effect of different decoder design parameters, like the design SNR and the LUT tree structure on the performance of our decoder, and we propose some complexity reduction techniques, such as LUT re-use and message alphabet downsizing.

arXiv:1512.00210•Asilomar Conference on Signals, Systems and Computers (ACSSC)•Nov 1, 2015•28 citations

Design of Mutual-Information-Maximizing Quantized Shuffled Min-Sum Decoder for Rate-Compatible Quasi-Cyclic LDPC Codes

Peng Kang, Kui Cai, Xuan He

In this paper, we propose a finite alphabet iterative decoder (FAID) named rate-compatible mutual-information-maximizing quantized shuffled min-sum (RC-MIM-QSMS) decoder, for decoding quasi-cyclic low-density parity-check (QC-LDPC) codes with various code rates. Our proposed decoder exchanges the coarsely quantized messages represented by symbols from finite alphabets and adopts single-input lookup tables (LUTs) to implement the node updates. To construct the LUTs used for decoding, we first propose a modified density evolution by considering the shuffled schedule to generate the LUTs which vary with different layers and iterations. Furthermore, to reduce the memory requirement for storing the LUTs, we optimize the constructed LUTs into a unique set of LUTs that only change with different decoding iterations. To the best of our knowledge, the RC-MIM-QSMS decoder is the first one to integrate the rate compatibility of LDPC codes with the shuffled decoding schedule. Simulation results show that the proposed RC-MIM-QSMS decoder outperforms the floating-point shuffled belief propagation decoder in the high signal-to-noise region and achieves comparable convergence speed to other state-of-the-art FAIDs. Moreover, the RC-MIM-QSMS decoder is able to save up to 93.22% memory requirement compared to the benchmark MIM-FAIDs.

Electronics•Oct 6, 2022•1 citation

Design of Lookup-Table (LUT) Decoder for Protograph-Based Low-Density Parity-Check (LDPC) codes

Chatuporn Duangthong, Watid Phakphisut

The Belief-propagation (BP) algorithm is a powerful decoder for LDPC codes. However, the BP algorithm requires the high complexity of the check node operation. Therefore, in the previous works, a lookup table (LUT)-based decoder has been proposed for LDPC codes. In this work, we propose the LUT design for protograph LDPC codes. Our LUT design can support the parallel edge, variable node with degree-1 and punctured variable node. As a result, the coding losses of 2-, 3- and 4-bit quantization of LUT decoder are 1.6, 0.5 and 0.1 dB compared to BP algorithm.

International Technical Conference on Circuits/Systems, Computers and Communications (ITC-CSCC)•Jul 5, 2022•2 citations

A Reconstruction-Computation-Quantization (RCQ) Approach to Node Operations in LDPC Decoding

Linfang Wang, Richard D. Wesel, Maximilian Stark +1 more

This paper proposes a finite-precision decoding method for low-density parity-check (LDPC) codes that features the three steps of Reconstruction, Computation, and Quantization (RCQ). Unlike Mutual-Information-Maximization Quantized Belief Propagation (MIM-QBP), RCQ can approximate either belief propagation or Min-Sum decoding. MIM-QBP decoders do not work well when the fraction of degree-2 variable nodes is large. However, sometimes a large fraction of degree-2 variable nodes is used to facilitate a fast encoding structure, as seen in the IEEE 802.11 standard and the DVB-S2 standard. In contrast to MIM-QBP, the proposed RCQ decoder may be applied to any off-the-shelf LDPC code, including those with a large fraction of degree-2 variable nodes. Simulations show that a 4-bit Min-Sum RCQ decoder delivers frame error rate (FER) performance within 0.1 dB of floating point belief propagation (BP) for the IEEE 802.11 standard LDPC code in the low SNR region. The RCQ decoder actually outperforms floating point BP and Min-Sum in the high SNR region were FER less than 10-5. This paper also introduces Hierarchical Dynamic Quantization (HDQ) to design the time-varying non-uniform quantizers required by RCQ decoders. HDQ is a low-complexity design technique that is slightly sub-optimal. Simulation results comparing HDQ and optimal quantization on the symmetric binary-input memoryless additive white Gaussian noise channel show a mutual information loss of less than 10-6bits, which is negligible in practice.

arXiv:2005.07259•Globecom•Dec 1, 2020•11 citations

Mutual Information-Maximizing Quantized Layered Min-Sum Decoding of QC-LDPC Codes

Cheng Lv, Xuan He, Peng Kang +3 more

In this paper, we propose a mutual information-maximizing quantized layered min-sum (MIM-QLMS) decoder for quasi-cyclic low-density parity-check (QC-LDPC) codes. Our proposed decoder operates similarly to a layered min-sum decoder with additional reconstruction and quantization operations by using single-input lookup tables (LUTs). In particular, we first develop the protograph-based MIM density evolution to design the LUTs, which may differ for each iteration and each edge in the protograph of the QC-LDPC codes. Furthermore, to minimize the memory requirement for storing the LUTs, we propose an optimization method to unify all LUTs into only four distinct LUTs, which can be used for all decoding iterations. To the best of our knowledge, the proposed MIM-QLMS decoders are the first class of layered finite alphabet iterative decoders (FAIDs) that are designed based on accurately tracking the probability distributions of the exchanged messages. Simulation results show that for 3-bit (resp. 4-bit) exchanged message precision, the proposed MIM-QLMS decoders can reasonably (resp. generally) outperform the state-of-the-art layered FAIDs and the layered normalized min-sum decoder, in terms of both the error rate performance and the average number of iterations.

Globecom•Dec 4, 2022•7 citations
In this paper, we propose a novel design method for the lookup tables (LUTs) of the minimum reconstruction, computation, and quantization (min-RCQ) LDPC code decoding algorithm. The proposed design method uses Bayesian optimization and samples from a subspace of the design space. The novel design method does not require knowledge about the channel or the modulation format and uses the frame error rate (FER) as loss function. The design method is applicable to irregular low-density parity-check (LDPC) codes with puncturing and shortening. Furthermore, the design method creates a set of iteration-agnostic LUTs that can be used over all iterations, which makes this approach suitable for fully node-parallel decoder architectures. We show that our proposed approach achieves a 38.6 % better energy efficiency than a state-of-the-art normalized min-sum (NMS) decoder without loss in error correction performance.
Irregular low-density parity-check (LDPC) codes are among the best codes currently known. Unfortunately, the performance of existing codes may deteriorate substantially with practical finite-precision decoder implementations. This motivates us to extend our previous work on finite-alphabet decoders based on look-up tables (LUTs) to irregular LDPC codes. We devise a joint design of the LUTs used for different node degrees and present a strategy to optimize the degree distribution (DD) of the LDPC code under LUT decoding. Numerical simulations show that with 4-bit LUT decoding the resulting codes outperform state-of-the-art codes with floating point min-sum (MS) decoding.
We propose a quantized decoding algorithm for low- density parity-check codes where the variable node update rule of the standard min-sum algorithm is replaced with a look-up table (LUT) that is designed using an information-theoretic criterion. We show that even with message resolutions as low as 3 bits, the proposed algorithm can achieve better error rates than a floating-point min-sum decoder. Moreover, we study in detail the effect of different decoder design parameters, like the design SNR and the LUT tree structure on the performance of our decoder, and we propose some complexity reduction techniques, such as LUT re-use and message alphabet downsizing.
In this paper, we propose a finite alphabet iterative decoder (FAID) named rate-compatible mutual-information-maximizing quantized shuffled min-sum (RC-MIM-QSMS) decoder, for decoding quasi-cyclic low-density parity-check (QC-LDPC) codes with various code rates. Our proposed decoder exchanges the coarsely quantized messages represented by symbols from finite alphabets and adopts single-input lookup tables (LUTs) to implement the node updates. To construct the LUTs used for decoding, we first propose a modified density evolution by considering the shuffled schedule to generate the LUTs which vary with different layers and iterations. Furthermore, to reduce the memory requirement for storing the LUTs, we optimize the constructed LUTs into a unique set of LUTs that only change with different decoding iterations. To the best of our knowledge, the RC-MIM-QSMS decoder is the first one to integrate the rate compatibility of LDPC codes with the shuffled decoding schedule. Simulation results show that the proposed RC-MIM-QSMS decoder outperforms the floating-point shuffled belief propagation decoder in the high signal-to-noise region and achieves comparable convergence speed to other state-of-the-art FAIDs. Moreover, the RC-MIM-QSMS decoder is able to save up to 93.22% memory requirement compared to the benchmark MIM-FAIDs.
The Belief-propagation (BP) algorithm is a powerful decoder for LDPC codes. However, the BP algorithm requires the high complexity of the check node operation. Therefore, in the previous works, a lookup table (LUT)-based decoder has been proposed for LDPC codes. In this work, we propose the LUT design for protograph LDPC codes. Our LUT design can support the parallel edge, variable node with degree-1 and punctured variable node. As a result, the coding losses of 2-, 3- and 4-bit quantization of LUT decoder are 1.6, 0.5 and 0.1 dB compared to BP algorithm.
This paper proposes a finite-precision decoding method for low-density parity-check (LDPC) codes that features the three steps of Reconstruction, Computation, and Quantization (RCQ). Unlike Mutual-Information-Maximization Quantized Belief Propagation (MIM-QBP), RCQ can approximate either belief propagation or Min-Sum decoding. MIM-QBP decoders do not work well when the fraction of degree-2 variable nodes is large. However, sometimes a large fraction of degree-2 variable nodes is used to facilitate a fast encoding structure, as seen in the IEEE 802.11 standard and the DVB-S2 standard. In contrast to MIM-QBP, the proposed RCQ decoder may be applied to any off-the-shelf LDPC code, including those with a large fraction of degree-2 variable nodes. Simulations show that a 4-bit Min-Sum RCQ decoder delivers frame error rate (FER) performance within 0.1 dB of floating point belief propagation (BP) for the IEEE 802.11 standard LDPC code in the low SNR region. The RCQ decoder actually outperforms floating point BP and Min-Sum in the high SNR region were FER less than 10-5. This paper also introduces Hierarchical Dynamic Quantization (HDQ) to design the time-varying non-uniform quantizers required by RCQ decoders. HDQ is a low-complexity design technique that is slightly sub-optimal. Simulation results comparing HDQ and optimal quantization on the symmetric binary-input memoryless additive white Gaussian noise channel show a mutual information loss of less than 10-6bits, which is negligible in practice.
In this paper, we propose a mutual information-maximizing quantized layered min-sum (MIM-QLMS) decoder for quasi-cyclic low-density parity-check (QC-LDPC) codes. Our proposed decoder operates similarly to a layered min-sum decoder with additional reconstruction and quantization operations by using single-input lookup tables (LUTs). In particular, we first develop the protograph-based MIM density evolution to design the LUTs, which may differ for each iteration and each edge in the protograph of the QC-LDPC codes. Furthermore, to minimize the memory requirement for storing the LUTs, we propose an optimization method to unify all LUTs into only four distinct LUTs, which can be used for all decoding iterations. To the best of our knowledge, the proposed MIM-QLMS decoders are the first class of layered finite alphabet iterative decoders (FAIDs) that are designed based on accurately tracking the probability distributions of the exchanged messages. Simulation results show that for 3-bit (resp. 4-bit) exchanged message precision, the proposed MIM-QLMS decoders can reasonably (resp. generally) outperform the state-of-the-art layered FAIDs and the layered normalized min-sum decoder, in terms of both the error rate performance and the average number of iterations.