Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.07021

Single-shot ground-state preparation via strongly coupled baths

Liang-Hong Mo, Jerome Lloyd, Yuxuan Zhang, Dmitry A. Abanin, Biao Lian

Published Nov 4, 2026• 0 citations
arXivHTMLPDF

Abstract

Preparing ground and thermal states of quantum many-body systems is a central task in quantum simulation. Dissipative protocols have emerged as a promising solution for both near-term and fault-tolerant hardware, but most constructions rely on weak system-bath coupling, leading to slow cooling. Here, we construct cooling protocols at strong system-bath coupling, and demonstrate accurate state preparation within even a single cooling cycle. Our protocols combine dynamically ramped ancilla energy levels with time-dependent couplings to optimize the trade-off between cooling error and physical time. For a general class of free-fermion systems, we reduce the dynamics exactly to a two-level scattering problem: ground-state cooling becomes a control problem of maximizing resonant excitation transfer while suppressing non-adiabatic heating. We then construct a family of ``Möbius-Ingham'' protocols, which reach optimal error scaling for gapless spectra and almost-exponential suppression of the leading heating error for gapped spectra, as a function of the cycle period. In our free-fermion benchmarks, Möbius-Ingham cooling lies on the Pareto frontier between steady-state error and cooling time among the controls tested. We further demonstrate its effectiveness in interacting Ising and $t$-$V$ chains and the two-dimensional Fermi-Hubbard model. Finally, we extend our construction to Gibbs state preparation, showing how free-fermion thermal states can be prepared in a single cycle.

DOI
10.48550/arxiv.2611.07021

Related papers

Rigorous error bounds for dissipative thermal state preparation from weak system-bath coupling

Christopher Ong, S. A. Parameswaran, Benedikt Placke +1 more

Thermal state preparation is a central challenge in the simulation of quantum many-body systems. Yet, provably efficient algorithms for this task were only introduced recently [Chen et al. Nature 646, 561 (2025)]. These algorithms are based on dissipative Lindbladian evolution which exactly fixes the thermal state. Controlled and efficient digital simulation of this evolution, although possible in principle, remains out of reach for present-day quantum hardware. Subsequent work has therefore focused on analog approximations of the proposed Lindbladians via `collision models' with relatively modest requirements -- a resettable bath of ancilla qubits whose couplings to the system can be tuned in time-dependent fashion -- while still admitting rigorous fixed-point error bounds. Existing rigorous approaches, however, do not exploit the fact that these constructions generically implement not only the desired Lindblad dynamics, but also an additional unitary evolution generated by the system Hamiltonian which may aid convergence to the thermal state [Lloyd and Abanin arXiv:2506.21318 (2025)]. Here, we show that this unitary contribution does indeed tighten the fixed-point error bound and demonstrate that it is rigorously controlled by the system-bath coupling strength $J$, scaling as $J^2$. This demonstrates that the effect of the spurious `Lamb shift' term generated by the system-bath interaction can be controlled by tuning $J$. We clarify the role, previously observed, of a randomized implementation in suppressing possible resonances of the drive with the many-body spectrum, and bound the additional variance that this randomization imposes on observables. Finally, we numerically study aspects of the protocol which are relevant for its practical realization, such as the mixing time.

quant-pharXiv:2605.03011•Physical Review A•May 6, 2026•4 citations

Model-agnostic cooling algorithms for strongly interacting fermions

Henning Schlömer, Liyuan Chen, Susanne F. Yelin +1 more

Strongly interacting fermions underpin some of the most challenging problems in condensed matter physics, such as high-temperature superconductivity. The low-energy states of these systems encode their essential microscopic properties, yet remain largely inaccessible to classical methods. Quantum simulation offers a promising path forward, and among state-preparation strategies, engineered dissipation has emerged as a particularly compelling approach. Existing cooling protocols, however, typically rely on knowledge of the quasiparticle spectrum or mappings to free-fermion limits. In this letter, we introduce a randomized, symmetry-preserving cooling algorithm that requires no spectral information, using only local coupling operators to ancilla degrees of freedom with randomly sampled energy splittings to drive generic fermionic systems toward their low-energy manifold. We benchmark the protocol on canonical correlated fermionic models relevant to high-temperature superconductors, spanning metallic, density-wave, paired, superconducting, and phase-separated phases. Across all models, we observe universal cooling behavior: monotonic energy relaxation, concentration of spectral weight at low energies, and stabilization of correlated ground-state order. Our results establish randomized dissipative cooling as a general strategy for preparing strongly correlated fermionic states on programmable quantum devices.

cond-mat.str-elCross-listedarXiv:2605.01029•May 5, 2026•4 citations

Quantum digital cooling

Stefano Polla, Yaroslav Herasymenko, Thomas E. O’Brien

We introduce a method for digital preparation of ground states of simulated Hamiltonians, inspired by cooling in nature and adapted to leverage the capabilities of digital quantum hardware. The cold bath is simulated by a single ancillary qubit, which is reset periodically and coupled to the system nonperturbatively. Studying this cooling method on a 1-qubit system toy model, we optimize two cooling protocols based on weak-coupling and strong-coupling approaches. Extending the insight from the 1-qubit system model, we develop two scalable protocols for larger systems. The LogSweep protocol extends the weak-coupling approach by sweeping energies to resonantly match any targeted transition. We test LogSweep on the 1D transverse-field Ising model, demonstrating approximate ground-state preparation with an error that can be made polynomially small in the computation time for all three phases of the system. The BangBang protocol extends the strong-coupling approach, and exploits a heuristics for local Hamiltonians to maximize the probability of deexciting system transitions in the shortest possible time. Although this protocol does not promise long-time convergence, it allows for a rapid cooling to an approximation of the ground state, making this protocol appealing for near-term demonstrations.

arXiv:1909.10538•Physical Review A•Jul 15, 2021•38 citations

Digital dissipative state preparation for frustration-free gapless quantum systems

Johannes Feldmeier, Yu-Jie Liu, Mikhail D. Lukin +1 more

Preparing algebraically correlated ground states of quantum many-body systems is an important, yet challenging task for quantum simulation. We introduce a protocol that employs local projective measurements and unitary feedback for frustration-free gapless systems. Our approach prepares a priori unknown ground states in time that scales polynomially with system size. We analytically show the performance our protocol for the dynamics of a single-particle; we argue the same mechanism generalizes to many-body systems based on the physics of quasiparticles. Our theory predicts that a transient cooling dynamics directly reveals the system's universal critical properties. In particular, the state preparation time is linear in the inverse of the finite-size gap (up to log correction) when the system's dynamical critical exponent is larger or equal the effective spatial dimension explored by the quasiparticles. We verify these predictions in numerical simulations of ferromagnetic Heisenberg models in one- and two dimensions, a Fredkin spin chain, and a two-dimensional model of resonating valence bond states. Our protocol stabilizes gapless many-body ground states fully digitally without requiring analog rotations, enabling access to high-fidelity states beyond conventional adiabatic approaches in near-term experiments.

quant-pharXiv:2603.10119•Physical Review Letters•Mar 12, 2026•8 citations

Bath-assisted cooling without resets

Xie-Hang Yu, Zherui Chen, Lin Lin

Cooling an arbitrary mixed state to a pure ground state requires transferring its entropy to an environment. Can a single coherent bath contact accomplish this without repeated bath resets? We develop a new cooling mechanism that transfers the input information into bath degrees of freedom that subsequently decouple, while the system and the remaining bath follow a ground-state path. The bath is discarded only at the end, and the system Hamiltonian remains on and unmodified throughout. We rigorously realize this mechanism for a class of weakly interacting, gapped fermionic systems with local interactions. Starting from any mixed state, our protocol prepares the interacting ground state in total physical time polylogarithmic in the system size and inverse global trace-norm error. It uses two initially empty bath modes per system mode and a single pulse shared across all onsite system--bath couplings. The same pulse prepares each admissible system's own ground state without knowledge of its microscopic parameters. The guarantees follow directly from a non-Markovian system--bath dynamics without an effective Lindbladian description.

quant-pharXiv:2609.40328•Oct 1, 2026•3 citations

Sublinear thermal state and ground state preparation for free fermions via system-bath interaction

Zhiyan Ding, Lin Lin, Ke Wang

Dissipative algorithms for preparing thermal and ground states typically require a total Hamiltonian simulation time that grows at least linearly with system size $N$, even when their mixing time grows only polylogarithmically. We achieve sublinear simulation time for free fermions by engineering local interactions with a bath whose size grows in proportion to the system size. Starting from arbitrary initial states, our thermal state preparation algorithm achieves trace-norm error $ε$ in total simulation time $\widetilde{O}(\sqrt{N}/ε)$ at fixed inverse temperature and bounded single-particle bandwidth, while ground state preparation of gapped systems requires only $\mathrm{polylog}(N/ε)$ time. We further establish lower bounds for thermal state preparation within the bath protocols considered, identifying two obstacles to faster preparation, namely fourth-order deviations from the target thermal state and fluctuations induced by a random frequency shared by all bath qubits. Our results demonstrate that the linear simulation time barrier in dissipative state preparation can be overcome and clarify the bath and filter-design constraints that govern further complexity improvements.

quant-pharXiv:2610.35370•Oct 27, 2026•0 citations
Preparing ground and thermal states of quantum many-body systems is a central task in quantum simulation. Dissipative protocols have emerged as a promising solution for both near-term and fault-tolerant hardware, but most constructions rely on weak system-bath coupling, leading to slow cooling. Here, we construct cooling protocols at strong system-bath coupling, and demonstrate accurate state preparation within even a single cooling cycle. Our protocols combine dynamically ramped ancilla energy levels with time-dependent couplings to optimize the trade-off between cooling error and physical time. For a general class of free-fermion systems, we reduce the dynamics exactly to a two-level scattering problem: ground-state cooling becomes a control problem of maximizing resonant excitation transfer while suppressing non-adiabatic heating. We then construct a family of ``Möbius-Ingham'' protocols, which reach optimal error scaling for gapless spectra and almost-exponential suppression of the leading heating error for gapped spectra, as a function of the cycle period. In our free-fermion benchmarks, Möbius-Ingham cooling lies on the Pareto frontier between steady-state error and cooling time among the controls tested. We further demonstrate its effectiveness in interacting Ising and ttt-VVV chains and the two-dimensional Fermi-Hubbard model. Finally, we extend our construction to Gibbs state preparation, showing how free-fermion thermal states can be prepared in a single cycle.
Thermal state preparation is a central challenge in the simulation of quantum many-body systems. Yet, provably efficient algorithms for this task were only introduced recently [Chen et al. Nature 646, 561 (2025)]. These algorithms are based on dissipative Lindbladian evolution which exactly fixes the thermal state. Controlled and efficient digital simulation of this evolution, although possible in principle, remains out of reach for present-day quantum hardware. Subsequent work has therefore focused on analog approximations of the proposed Lindbladians via `collision models' with relatively modest requirements -- a resettable bath of ancilla qubits whose couplings to the system can be tuned in time-dependent fashion -- while still admitting rigorous fixed-point error bounds. Existing rigorous approaches, however, do not exploit the fact that these constructions generically implement not only the desired Lindblad dynamics, but also an additional unitary evolution generated by the system Hamiltonian which may aid convergence to the thermal state [Lloyd and Abanin arXiv:2506.21318 (2025)]. Here, we show that this unitary contribution does indeed tighten the fixed-point error bound and demonstrate that it is rigorously controlled by the system-bath coupling strength JJJ, scaling as J2J^2J2. This demonstrates that the effect of the spurious `Lamb shift' term generated by the system-bath interaction can be controlled by tuning JJJ. We clarify the role, previously observed, of a randomized implementation in suppressing possible resonances of the drive with the many-body spectrum, and bound the additional variance that this randomization imposes on observables. Finally, we numerically study aspects of the protocol which are relevant for its practical realization, such as the mixing time.
Strongly interacting fermions underpin some of the most challenging problems in condensed matter physics, such as high-temperature superconductivity. The low-energy states of these systems encode their essential microscopic properties, yet remain largely inaccessible to classical methods. Quantum simulation offers a promising path forward, and among state-preparation strategies, engineered dissipation has emerged as a particularly compelling approach. Existing cooling protocols, however, typically rely on knowledge of the quasiparticle spectrum or mappings to free-fermion limits. In this letter, we introduce a randomized, symmetry-preserving cooling algorithm that requires no spectral information, using only local coupling operators to ancilla degrees of freedom with randomly sampled energy splittings to drive generic fermionic systems toward their low-energy manifold. We benchmark the protocol on canonical correlated fermionic models relevant to high-temperature superconductors, spanning metallic, density-wave, paired, superconducting, and phase-separated phases. Across all models, we observe universal cooling behavior: monotonic energy relaxation, concentration of spectral weight at low energies, and stabilization of correlated ground-state order. Our results establish randomized dissipative cooling as a general strategy for preparing strongly correlated fermionic states on programmable quantum devices.
We introduce a method for digital preparation of ground states of simulated Hamiltonians, inspired by cooling in nature and adapted to leverage the capabilities of digital quantum hardware. The cold bath is simulated by a single ancillary qubit, which is reset periodically and coupled to the system nonperturbatively. Studying this cooling method on a 1-qubit system toy model, we optimize two cooling protocols based on weak-coupling and strong-coupling approaches. Extending the insight from the 1-qubit system model, we develop two scalable protocols for larger systems. The LogSweep protocol extends the weak-coupling approach by sweeping energies to resonantly match any targeted transition. We test LogSweep on the 1D transverse-field Ising model, demonstrating approximate ground-state preparation with an error that can be made polynomially small in the computation time for all three phases of the system. The BangBang protocol extends the strong-coupling approach, and exploits a heuristics for local Hamiltonians to maximize the probability of deexciting system transitions in the shortest possible time. Although this protocol does not promise long-time convergence, it allows for a rapid cooling to an approximation of the ground state, making this protocol appealing for near-term demonstrations.
Preparing algebraically correlated ground states of quantum many-body systems is an important, yet challenging task for quantum simulation. We introduce a protocol that employs local projective measurements and unitary feedback for frustration-free gapless systems. Our approach prepares a priori unknown ground states in time that scales polynomially with system size. We analytically show the performance our protocol for the dynamics of a single-particle; we argue the same mechanism generalizes to many-body systems based on the physics of quasiparticles. Our theory predicts that a transient cooling dynamics directly reveals the system's universal critical properties. In particular, the state preparation time is linear in the inverse of the finite-size gap (up to log correction) when the system's dynamical critical exponent is larger or equal the effective spatial dimension explored by the quasiparticles. We verify these predictions in numerical simulations of ferromagnetic Heisenberg models in one- and two dimensions, a Fredkin spin chain, and a two-dimensional model of resonating valence bond states. Our protocol stabilizes gapless many-body ground states fully digitally without requiring analog rotations, enabling access to high-fidelity states beyond conventional adiabatic approaches in near-term experiments.
Cooling an arbitrary mixed state to a pure ground state requires transferring its entropy to an environment. Can a single coherent bath contact accomplish this without repeated bath resets? We develop a new cooling mechanism that transfers the input information into bath degrees of freedom that subsequently decouple, while the system and the remaining bath follow a ground-state path. The bath is discarded only at the end, and the system Hamiltonian remains on and unmodified throughout. We rigorously realize this mechanism for a class of weakly interacting, gapped fermionic systems with local interactions. Starting from any mixed state, our protocol prepares the interacting ground state in total physical time polylogarithmic in the system size and inverse global trace-norm error. It uses two initially empty bath modes per system mode and a single pulse shared across all onsite system--bath couplings. The same pulse prepares each admissible system's own ground state without knowledge of its microscopic parameters. The guarantees follow directly from a non-Markovian system--bath dynamics without an effective Lindbladian description.
Dissipative algorithms for preparing thermal and ground states typically require a total Hamiltonian simulation time that grows at least linearly with system size NNN, even when their mixing time grows only polylogarithmically. We achieve sublinear simulation time for free fermions by engineering local interactions with a bath whose size grows in proportion to the system size. Starting from arbitrary initial states, our thermal state preparation algorithm achieves trace-norm error εεε in total simulation time O~(N/ε)\widetilde{O}(\sqrt{N}/ε)O(N​/ε) at fixed inverse temperature and bounded single-particle bandwidth, while ground state preparation of gapped systems requires only polylog(N/ε)\mathrm{polylog}(N/ε)polylog(N/ε) time. We further establish lower bounds for thermal state preparation within the bath protocols considered, identifying two obstacles to faster preparation, namely fourth-order deviations from the target thermal state and fluctuations induced by a random frequency shared by all bath qubits. Our results demonstrate that the linear simulation time barrier in dissipative state preparation can be overcome and clarify the bath and filter-design constraints that govern further complexity improvements.