Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.06216

Resetting a Superconducting Qubit with a Compact Colder Resistive Dissipator below the Qubit Frequency

Jiajia Tian, Meiling Li, Weijie Sun, Yanjun Ma, Zhenyu Mi, Fei Yan, Huikai Xu, Pei Liu, Guangming Xue, Haifeng Yu

Published Nov 4, 2026• 0 citations
arXivHTMLPDF

Abstract

Efficient qubit reset has become a key requirement for large-scale superconducting quantum processors, as initialization fidelity increasingly lags behind gate performance and quantum error correction demands rapid, high-fidelity state re-initialization. This work proposes a compact on-chip dissipator consisting of two transmon dissipation modes and a thin-film resistor, and experimentally demonstrates an unconditional reset protocol. With no additional control lines and negligible impact on the qubit $T_1$, the effective temperature of the transmon qubit is reduced from $49$~mK to $35$~mK. Quantum process tomography is employed to benchmark the reset process, achieving a process error of $0.0028$. This reset protocol is robust to pulse parameter deviations, thereby relaxing calibration requirements. The dissipator architecture provides a practical, calibration-friendly reset solution for large-scale superconducting quantum processors.

DOI
10.48550/arxiv.2611.06216

Related papers

Implementing rapid reset of superconducting qubits with on-chip dissipation

Feiyu Li, Yang Liu, Zhen Yang +10 more

Rapid and high-fidelity qubit reset is essential for quantum state initialization and quantum error correction. Conventional reset protocols for superconducting qubits often rely on dissipative elements connected to external circuitry, exposing qubits to thermal noise from higher-temperature environments. Here, we experimentally demonstrate a scalable approach to qubit reset and leakage removal over multiple transmon qubits using dedicated dissipation units comprising resonators coupled to on-chip resistive loads. This architecture provides Purcell protection while isolating the qubits from warmer external circuitry. We achieve a median reset time constant of approximately 48 ns for the $|g\rangle-|e\rangle$ transition, with an effective bath temperature of 30 mK. A 400-ns reset pulse yields residual excited-state populations of $0.29\%$ and $0.67\%$ for qubits initialized in $|g\rangle$ and $|e\rangle$, respectively. We further demonstrate efficient leakage removal from the $|f\rangle$ state, reducing its residual population to $0.51\%$. These results establish a simple, reproducible, and easy-to-integrate approach to dissipation engineering in superconducting quantum processors.

arXiv:2611.14391•Nov 10, 2026•0 citations

Rapid and unconditional parametric reset protocol for tunable superconducting qubits

Yu Zhou, Zhenxing Zhang, Zelong Yin +16 more

Qubit initialization is a critical task in quantum computation and communication. Extensive efforts have been made to achieve this with high speed, efficiency and scalability. However, previous approaches have either been measurement-based and required fast feedback, suffered from crosstalk or required sophisticated calibration. Here, we report a fast and high-fidelity reset scheme, avoiding the issues above without any additional chip architecture. By modulating the flux through a transmon qubit, we realize a swap between the qubit and its readout resonator that suppresses the excited state population to 0.08% ± 0.08% within 34 ns (284 ns if photon depletion of the resonator is required). Furthermore, our approach (i) can achieve effective second excited state depletion, (ii) has negligible effects on neighboring qubits, and (iii) offers a way to entangle the qubit with an itinerant single photon, useful in quantum communication applications.

arXiv:2103.11315•Nature Communications•Oct 11, 2021•92 citations

Multipurpose architecture for fast reset and protective readout of superconducting qubits

Jiayu Ding, Yulong Li, He Wang +12 more

The ability to fast reset a qubit state is crucial for quantum information processing. However, to actively reset a qubit requires engineering a pathway to interact with a dissipative bath, which often comes at the cost of reduced qubit protection from the environment. Here, we present a multipurpose architecture that enables fast reset and protection of superconducting qubits during control and readout. In our design, two on-chip diplexers are connected by two transmission lines. The high-pass branch provides a flat passband for convenient allocation of readout resonators above the qubit frequencies, which is preferred for reducing measurement-induced state transitions. In the low-pass branch, we leverage a standing-wave mode below the maximum qubit frequency for a rapid reset. The qubits are located in the common stopband to inhibit dissipation during coherent operations. We demonstrate resetting a transmon qubit from its first excited state to the ground state in 100 ns, achieving a residual population of 2.7%. The reset time may be further shortened to 27 ns by exploiting the coherent population inversion effect. We further extend the technique to resetting the qubit from its second excited state. Our approach promises scalable implementation of fast reset and qubit protection during control and readout, adding to the toolbox of dissipation engineering.

arXiv:2407.21332•Physical Review Applied•Jan 6, 2025•12 citations

Accelerating qubit reset through the Mpemba effect

Théo Lejeune, Miha Papič, John Goold +3 more

Passive qubit reset is a key primitive for quantum information processing, whereby qubits are initialized by allowing them to relax to their ground state through natural dissipation, without the need for active control or feedback. However, passive reset occurs on timescales that are much longer than those of gate operations and measurements, making it a significant bottleneck for algorithmic execution. Here, we show that this limitation can be overcome by exploiting the Mpemba effect, originally indicating the faster cooling of hot systems compared to cooler ones. Focusing on the regime where coherence times exceed energy relaxation times ($T_2 > T_1$), we propose a simple protocol based on a single entangling two-qubit gate that converts local single-qubit coherences into fast-decaying global two-qubit coherences. This removes their overlap with the slowest decaying Liouvillian mode and enables a substantially faster relaxation to the ground state. For realistic parameters, we find that our protocol can reduce reset times by up to $50\%$ compared to standard passive reset. We analyze the robustness of the protocol under non-Markovian noise, imperfect coherent control and finite temperature, finding that the accelerated reset persists across a broad range of realistic error sources. Finally, we present an experimental implementation of our protocol on an IQM superconducting quantum processor. Our results demonstrate how Mpemba-like accelerated relaxation can be harnessed as a practical tool for fast and accurate qubit initialization.

quant-pharXiv:2602.03765•Journal of Physics A Mathematical and Theoretical•Feb 4, 2026•6 citations

High-Fidelity Transmon Reset with a Multimode Acoustic Resonator

Andraž Omahen, Simon Storz, Igor Kladarić +1 more

Achieving sufficiently low residual excited-state populations remains a key challenge in superconducting quantum circuits, particularly for protocols operating close to noise limits or requiring repeated qubit initialization. Existing protocols primarily address this challenge through sophisticated control, engineered dissipation, or feedback mechanisms. Here, we demonstrate an alternative approach in which a superconducting qubit is reset using a physically distinct, intrinsically colder phononic bath. Specifically, we interface a transmon with a high-overtone bulk acoustic resonator (HBAR), enabling cooling of the qubit into GHz-frequency modes. Using this approach, we achieve a residual excited-state population of the qubit below $10^{-4}$, representing an improvement of one to two orders of magnitude compared to existing reset schemes. These results highlight the potential of phononic baths as a resource for high-fidelity qubit initialization in superconducting circuits.

quant-pharXiv:2604.08655•Physical Review Applied•Apr 13, 2026•1 citation

Fast and Unconditional All-Microwave Reset of a Superconducting Qubit

Paul Magnard, Philipp Kurpiers, Baptiste Royer +8 more

Active qubit reset is a key operation in many quantum algorithms, and particularly in quantum error correction. Here, we experimentally demonstrate a reset scheme for a three-level transmon artificial atom coupled to a large bandwidth resonator. The reset protocol uses a microwave-induced interaction between the |f,0⟩ and |g,1⟩ states of the coupled transmon-resonator system, with |g⟩ and |f⟩ denoting the ground and second excited states of the transmon, and |0⟩ and |1⟩ the photon Fock states of the resonator. We characterize the reset process and demonstrate reinitialization of the transmon-resonator system to its ground state in less than 500 ns and with 0.2% residual excitation. Our protocol is of practical interest as it has no additional architectural requirements beyond those needed for fast and efficient single-shot readout of transmons, and does not require feedback.

arXiv:1801.07689•Physical Review Letters•Aug 7, 2018•232 citations
Efficient qubit reset has become a key requirement for large-scale superconducting quantum processors, as initialization fidelity increasingly lags behind gate performance and quantum error correction demands rapid, high-fidelity state re-initialization. This work proposes a compact on-chip dissipator consisting of two transmon dissipation modes and a thin-film resistor, and experimentally demonstrates an unconditional reset protocol. With no additional control lines and negligible impact on the qubit T1T_1T1​, the effective temperature of the transmon qubit is reduced from 494949~mK to 353535~mK. Quantum process tomography is employed to benchmark the reset process, achieving a process error of 0.00280.00280.0028. This reset protocol is robust to pulse parameter deviations, thereby relaxing calibration requirements. The dissipator architecture provides a practical, calibration-friendly reset solution for large-scale superconducting quantum processors.
Rapid and high-fidelity qubit reset is essential for quantum state initialization and quantum error correction. Conventional reset protocols for superconducting qubits often rely on dissipative elements connected to external circuitry, exposing qubits to thermal noise from higher-temperature environments. Here, we experimentally demonstrate a scalable approach to qubit reset and leakage removal over multiple transmon qubits using dedicated dissipation units comprising resonators coupled to on-chip resistive loads. This architecture provides Purcell protection while isolating the qubits from warmer external circuitry. We achieve a median reset time constant of approximately 48 ns for the ∣g⟩−∣e⟩|g\rangle-|e\rangle∣g⟩−∣e⟩ transition, with an effective bath temperature of 30 mK. A 400-ns reset pulse yields residual excited-state populations of 0.29%0.29\%0.29% and 0.67%0.67\%0.67% for qubits initialized in ∣g⟩|g\rangle∣g⟩ and ∣e⟩|e\rangle∣e⟩, respectively. We further demonstrate efficient leakage removal from the ∣f⟩|f\rangle∣f⟩ state, reducing its residual population to 0.51%0.51\%0.51%. These results establish a simple, reproducible, and easy-to-integrate approach to dissipation engineering in superconducting quantum processors.
Qubit initialization is a critical task in quantum computation and communication. Extensive efforts have been made to achieve this with high speed, efficiency and scalability. However, previous approaches have either been measurement-based and required fast feedback, suffered from crosstalk or required sophisticated calibration. Here, we report a fast and high-fidelity reset scheme, avoiding the issues above without any additional chip architecture. By modulating the flux through a transmon qubit, we realize a swap between the qubit and its readout resonator that suppresses the excited state population to 0.08% ± 0.08% within 34 ns (284 ns if photon depletion of the resonator is required). Furthermore, our approach (i) can achieve effective second excited state depletion, (ii) has negligible effects on neighboring qubits, and (iii) offers a way to entangle the qubit with an itinerant single photon, useful in quantum communication applications.
The ability to fast reset a qubit state is crucial for quantum information processing. However, to actively reset a qubit requires engineering a pathway to interact with a dissipative bath, which often comes at the cost of reduced qubit protection from the environment. Here, we present a multipurpose architecture that enables fast reset and protection of superconducting qubits during control and readout. In our design, two on-chip diplexers are connected by two transmission lines. The high-pass branch provides a flat passband for convenient allocation of readout resonators above the qubit frequencies, which is preferred for reducing measurement-induced state transitions. In the low-pass branch, we leverage a standing-wave mode below the maximum qubit frequency for a rapid reset. The qubits are located in the common stopband to inhibit dissipation during coherent operations. We demonstrate resetting a transmon qubit from its first excited state to the ground state in 100 ns, achieving a residual population of 2.7%. The reset time may be further shortened to 27 ns by exploiting the coherent population inversion effect. We further extend the technique to resetting the qubit from its second excited state. Our approach promises scalable implementation of fast reset and qubit protection during control and readout, adding to the toolbox of dissipation engineering.
Passive qubit reset is a key primitive for quantum information processing, whereby qubits are initialized by allowing them to relax to their ground state through natural dissipation, without the need for active control or feedback. However, passive reset occurs on timescales that are much longer than those of gate operations and measurements, making it a significant bottleneck for algorithmic execution. Here, we show that this limitation can be overcome by exploiting the Mpemba effect, originally indicating the faster cooling of hot systems compared to cooler ones. Focusing on the regime where coherence times exceed energy relaxation times (T2>T1T_2 > T_1T2​>T1​), we propose a simple protocol based on a single entangling two-qubit gate that converts local single-qubit coherences into fast-decaying global two-qubit coherences. This removes their overlap with the slowest decaying Liouvillian mode and enables a substantially faster relaxation to the ground state. For realistic parameters, we find that our protocol can reduce reset times by up to 50%50\%50% compared to standard passive reset. We analyze the robustness of the protocol under non-Markovian noise, imperfect coherent control and finite temperature, finding that the accelerated reset persists across a broad range of realistic error sources. Finally, we present an experimental implementation of our protocol on an IQM superconducting quantum processor. Our results demonstrate how Mpemba-like accelerated relaxation can be harnessed as a practical tool for fast and accurate qubit initialization.
Achieving sufficiently low residual excited-state populations remains a key challenge in superconducting quantum circuits, particularly for protocols operating close to noise limits or requiring repeated qubit initialization. Existing protocols primarily address this challenge through sophisticated control, engineered dissipation, or feedback mechanisms. Here, we demonstrate an alternative approach in which a superconducting qubit is reset using a physically distinct, intrinsically colder phononic bath. Specifically, we interface a transmon with a high-overtone bulk acoustic resonator (HBAR), enabling cooling of the qubit into GHz-frequency modes. Using this approach, we achieve a residual excited-state population of the qubit below 10−410^{-4}10−4, representing an improvement of one to two orders of magnitude compared to existing reset schemes. These results highlight the potential of phononic baths as a resource for high-fidelity qubit initialization in superconducting circuits.
Active qubit reset is a key operation in many quantum algorithms, and particularly in quantum error correction. Here, we experimentally demonstrate a reset scheme for a three-level transmon artificial atom coupled to a large bandwidth resonator. The reset protocol uses a microwave-induced interaction between the |f,0⟩ and |g,1⟩ states of the coupled transmon-resonator system, with |g⟩ and |f⟩ denoting the ground and second excited states of the transmon, and |0⟩ and |1⟩ the photon Fock states of the resonator. We characterize the reset process and demonstrate reinitialization of the transmon-resonator system to its ground state in less than 500 ns and with 0.2% residual excitation. Our protocol is of practical interest as it has no additional architectural requirements beyond those needed for fast and efficient single-shot readout of transmons, and does not require feedback.