Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.06139 · Electronic Proceedings in Theoretical Computer Science

Pauli Gadget Synthesis for Gatesets with Arbitrary Even Arity Clifford Gates

Leo Becker, Arianne Meijer-van de Griend

Published Nov 2, 2026• 0 citations
arXivHTMLPDF

Abstract

We propose an algorithm that can synthesize circuits to gate sets consisting of a 2n-arity Clifford gate and arbitrary single qubit rotations.To do this, we represent the circuit as a sequence of Pauli gadgets and jointly synthesize them by placing the multi-qubit Clifford in the synthesized circuit and pushing its adjoint through the remaining gadgets such that some qubits are disconnected from some gadgets.The pushed gadgets are collected in a Clifford tableau, which is decomposed afterwards.With the help of our algorithm we run experiments where we synthesize circuits to varying sizes of target multi-qubit gates.These experiments indicate that increases in gate size can lead to smaller output circuits, and that different connectivity constraints have meaningful differences in how higher arity gates effect the circuit sized.

DOI
10.4204/eptcs.456.2

Related papers

Optimal Hadamard gate count for Clifford$+T$ synthesis of Pauli rotations sequences

Vivien Vandaele, Simon Martiel, Simon Perdrix +1 more

The Clifford$+T$ gate set is commonly used to perform universal quantum computation. In such setup the $T$ gate is typically much more expensive to implement in a fault-tolerant way than Clifford gates. To improve the feasibility of fault-tolerant quantum computing it is then crucial to minimize the number of $T$ gates. Many algorithms, yielding effective results, have been designed to address this problem. It has been demonstrated that performing a pre-processing step consisting of reducing the number of Hadamard gates in the circuit can help to exploit the full potential of these algorithms and thereby lead to a substantial $T$-count reduction. Moreover, minimizing the number of Hadamard gates also restrains the number of additional qubits and operations resulting from the gadgetization of Hadamard gates, a procedure used by some compilers to further reduce the number of $T$ gates. In this work we tackle the Hadamard gate reduction problem, and propose an algorithm for synthesizing a sequence of $π/4$ Pauli rotations with a minimal number of Hadamard gates. Based on this result, we present an algorithm which optimally minimizes the number of Hadamard gates lying between the first and the last $T$ gate of the circuit.

arXiv:2302.07040•Feb 14, 2023•4 citations

Synthesizing Circuits from Tableaus

anne mara

Quantum computers are only as powerful as the compilers that optimize the circuits they run. As quantum hardware scales, reducing gate counts and circuit depth becomes critical for practical computation. This work implements a core synthesis algorithm in OCaml that maps arbitrary Cliffords to circuits, a fundamental building block in quantum circuit compilation. The Clifford synthesis implementation is designed around how LambdaPC thinks about quantum computation, through Pauli operators. It frames synthesis as a search problem: given a Clifford tableau, find a path to the identity by applying gates. Working factor by factor, it reduces each Pauli pair (P, Q) to a canonical (Z_i, X_i) form using single-qubit Clifford gates and TQE gates, until the full tableau is decomposed into an executable circuit. The main challenge was working within LambdaPC's typed representation, where n-qubit Paulis are encoded as nested pairs. This required helper functions to extract Pauli data from those structures and pattern-matching logic to find minimal gate sequences, laying the groundwork for end-to-end Clifford compilation in LambdaPC.

•Jun 8, 2026•0 citations

Optimal Hadamard Gate Count for Clifford+ T Synthesis of Pauli Rotations Sequences

Vivien Vandaele, Simon Martiel, Simon Perdrix +1 more

The Clifford+ T gate set is commonly used to perform universal quantum computation. In such setup the T gate is typically much more expensive to implement in a fault-tolerant way than Clifford gates. To improve the feasibility of fault-tolerant quantum computing it is then crucial to minimize the number of T gates. Many algorithms, yielding effective results, have been designed to address this problem. It has been demonstrated that performing a pre-processing step consisting of reducing the number of Hadamard gates in the circuit can help to exploit the full potential of these algorithms and thereby lead to a substantial T -count reduction. Moreover, minimizing the number of Hadamard gates also restrains the number of additional qubits and operations resulting from the gadgetization of Hadamard gates, a procedure used by some compilers to further reduce the number of T gates. In this work we tackle the Hadamard gate reduction problem, and propose an algorithm for synthesizing a sequence of π /4 Pauli rotations with a minimal number of Hadamard gates. Based on this result, we present an algorithm which optimally minimizes the number of Hadamard gates lying between the first and the last T gate of the circuit.

ACM Transactions on Quantum Computing•Dec 28, 2023•15 citations

Equivariant Reinforcement Learning for Clifford Quantum Circuit Synthesis

Richie Yeung, Aleks Kissinger, Rob Cornish

We consider the problem of synthesizing Clifford quantum circuits for devices with all-to-all qubit connectivity. We approach this task as a reinforcement learning problem in which an agent learns to discover a sequence of elementary Clifford gates that reduces a given symplectic matrix representation of a Clifford circuit to the identity. This formulation permits a simple learning curriculum based on random walks from the identity. We introduce a novel neural network architecture that is equivariant to qubit relabelings of the symplectic matrix representation, and which is size-agnostic, allowing a single learned policy to be applied across different qubit counts without circuit splicing or network reparameterization. On six-qubit Clifford circuits, the largest regime for which optimal references are available, our agent finds circuits within one two-qubit gate of optimality in milliseconds per instance, and finds optimal circuits in 99.2% of instances within seconds per instance. After continued training on ten-qubit instances, the agent scales to unseen Clifford tableaus with up to thirty qubits, including targets generated from circuits with over a thousand Clifford gates, where it achieves lower average two-qubit gate counts than Qiskit's Aaronson-Gottesman and greedy Clifford synthesizers.

quant-pharXiv:2605.10910•May 12, 2026•4 citations

Clifford+V synthesis for multi-qubit unitary gates

Soichiro Yamazaki, Seiseki Akibue

We developed a general framework for synthesizing target gates by using a finite set of basic gates, which is a crucial step in quantum compilation. When approximating a gate in SU($n$), a naive brute-force search requires a computational complexity of $O(1/\varepsilon^{(n^2 - 1)})$ to achieve an approximation with error $\varepsilon$. In contrast, by using our method, the complexity can be reduced to $O(-n^2 \log\varepsilon/\varepsilon^{((n^2 - 1)/2)})$. This method requires almost no assumptions and can be applied to a variety of gate sets, including Clifford+$T$ and Clifford+$V$. Further, we introduce a suboptimal but short run-time algorithm for synthesizing multi-qubit controlled gates. This approach highlights the role of subgroup structures in reducing synthesis complexity and opens a new direction of study on the compilation of multi-qubit gates. The framework is broadly applicable to different universal gate sets, and our analysis suggests that it can serve as a foundation for resource-efficient quantum compilation in near-term architectures.

arXiv:2510.08312•Oct 9, 2025•1 citation

Clifford synthesis is NP-complete

Søren Fuglede Jørgensen

We show that the problem of synthesizing a quantum circuit for a given Clifford operator using at most a specified amount of resources is NP-complete for several resource models of practical interest. Specifically, we study synthesis of a given Clifford operator using single-qubit Clifford gates and two-qubit Clifford gates, with full qubit connectivity and no additional ancilla qubits. With single-qubit gates free and CNOT as the only two-qubit gate, we show that deciding whether a given target admits an implementation using at most a specified number of CNOT gates is NP-complete, and we show that the problem remains NP-complete when any two-qubit Clifford gate is allowed and the budget counts all such gates. Moreover, we show that both results continue to hold when SWAP gates may be inserted for free, and when single-qubit gates are also considered part of the budget. In each case, we build on recent work by Li and Guan and show that there are polynomial-time reductions from Hamiltonian path in grid graphs to these decision problems, using a number of qubits quadratic in the number of grid vertices.

quant-pharXiv:2610.40886•Nov 2, 2026•0 citations
We propose an algorithm that can synthesize circuits to gate sets consisting of a 2n-arity Clifford gate and arbitrary single qubit rotations.To do this, we represent the circuit as a sequence of Pauli gadgets and jointly synthesize them by placing the multi-qubit Clifford in the synthesized circuit and pushing its adjoint through the remaining gadgets such that some qubits are disconnected from some gadgets.The pushed gadgets are collected in a Clifford tableau, which is decomposed afterwards.With the help of our algorithm we run experiments where we synthesize circuits to varying sizes of target multi-qubit gates.These experiments indicate that increases in gate size can lead to smaller output circuits, and that different connectivity constraints have meaningful differences in how higher arity gates effect the circuit sized.
Optimal Hadamard gate count for Clifford+T+T+T synthesis of Pauli rotations sequences
The Clifford+T+T+T gate set is commonly used to perform universal quantum computation. In such setup the TTT gate is typically much more expensive to implement in a fault-tolerant way than Clifford gates. To improve the feasibility of fault-tolerant quantum computing it is then crucial to minimize the number of TTT gates. Many algorithms, yielding effective results, have been designed to address this problem. It has been demonstrated that performing a pre-processing step consisting of reducing the number of Hadamard gates in the circuit can help to exploit the full potential of these algorithms and thereby lead to a substantial TTT-count reduction. Moreover, minimizing the number of Hadamard gates also restrains the number of additional qubits and operations resulting from the gadgetization of Hadamard gates, a procedure used by some compilers to further reduce the number of TTT gates. In this work we tackle the Hadamard gate reduction problem, and propose an algorithm for synthesizing a sequence of π/4π/4π/4 Pauli rotations with a minimal number of Hadamard gates. Based on this result, we present an algorithm which optimally minimizes the number of Hadamard gates lying between the first and the last TTT gate of the circuit.
Quantum computers are only as powerful as the compilers that optimize the circuits they run. As quantum hardware scales, reducing gate counts and circuit depth becomes critical for practical computation. This work implements a core synthesis algorithm in OCaml that maps arbitrary Cliffords to circuits, a fundamental building block in quantum circuit compilation. The Clifford synthesis implementation is designed around how LambdaPC thinks about quantum computation, through Pauli operators. It frames synthesis as a search problem: given a Clifford tableau, find a path to the identity by applying gates. Working factor by factor, it reduces each Pauli pair (P, Q) to a canonical (Z_i, X_i) form using single-qubit Clifford gates and TQE gates, until the full tableau is decomposed into an executable circuit. The main challenge was working within LambdaPC's typed representation, where n-qubit Paulis are encoded as nested pairs. This required helper functions to extract Pauli data from those structures and pattern-matching logic to find minimal gate sequences, laying the groundwork for end-to-end Clifford compilation in LambdaPC.
The Clifford+ T gate set is commonly used to perform universal quantum computation. In such setup the T gate is typically much more expensive to implement in a fault-tolerant way than Clifford gates. To improve the feasibility of fault-tolerant quantum computing it is then crucial to minimize the number of T gates. Many algorithms, yielding effective results, have been designed to address this problem. It has been demonstrated that performing a pre-processing step consisting of reducing the number of Hadamard gates in the circuit can help to exploit the full potential of these algorithms and thereby lead to a substantial T -count reduction. Moreover, minimizing the number of Hadamard gates also restrains the number of additional qubits and operations resulting from the gadgetization of Hadamard gates, a procedure used by some compilers to further reduce the number of T gates. In this work we tackle the Hadamard gate reduction problem, and propose an algorithm for synthesizing a sequence of π /4 Pauli rotations with a minimal number of Hadamard gates. Based on this result, we present an algorithm which optimally minimizes the number of Hadamard gates lying between the first and the last T gate of the circuit.
We consider the problem of synthesizing Clifford quantum circuits for devices with all-to-all qubit connectivity. We approach this task as a reinforcement learning problem in which an agent learns to discover a sequence of elementary Clifford gates that reduces a given symplectic matrix representation of a Clifford circuit to the identity. This formulation permits a simple learning curriculum based on random walks from the identity. We introduce a novel neural network architecture that is equivariant to qubit relabelings of the symplectic matrix representation, and which is size-agnostic, allowing a single learned policy to be applied across different qubit counts without circuit splicing or network reparameterization. On six-qubit Clifford circuits, the largest regime for which optimal references are available, our agent finds circuits within one two-qubit gate of optimality in milliseconds per instance, and finds optimal circuits in 99.2% of instances within seconds per instance. After continued training on ten-qubit instances, the agent scales to unseen Clifford tableaus with up to thirty qubits, including targets generated from circuits with over a thousand Clifford gates, where it achieves lower average two-qubit gate counts than Qiskit's Aaronson-Gottesman and greedy Clifford synthesizers.
We developed a general framework for synthesizing target gates by using a finite set of basic gates, which is a crucial step in quantum compilation. When approximating a gate in SU(nnn), a naive brute-force search requires a computational complexity of O(1/ε(n2−1))O(1/\varepsilon^{(n^2 - 1)})O(1/ε(n2−1)) to achieve an approximation with error ε\varepsilonε. In contrast, by using our method, the complexity can be reduced to O(−n2log⁡ε/ε((n2−1)/2))O(-n^2 \log\varepsilon/\varepsilon^{((n^2 - 1)/2)})O(−n2logε/ε((n2−1)/2)). This method requires almost no assumptions and can be applied to a variety of gate sets, including Clifford+TTT and Clifford+VVV. Further, we introduce a suboptimal but short run-time algorithm for synthesizing multi-qubit controlled gates. This approach highlights the role of subgroup structures in reducing synthesis complexity and opens a new direction of study on the compilation of multi-qubit gates. The framework is broadly applicable to different universal gate sets, and our analysis suggests that it can serve as a foundation for resource-efficient quantum compilation in near-term architectures.
We show that the problem of synthesizing a quantum circuit for a given Clifford operator using at most a specified amount of resources is NP-complete for several resource models of practical interest. Specifically, we study synthesis of a given Clifford operator using single-qubit Clifford gates and two-qubit Clifford gates, with full qubit connectivity and no additional ancilla qubits. With single-qubit gates free and CNOT as the only two-qubit gate, we show that deciding whether a given target admits an implementation using at most a specified number of CNOT gates is NP-complete, and we show that the problem remains NP-complete when any two-qubit Clifford gate is allowed and the budget counts all such gates. Moreover, we show that both results continue to hold when SWAP gates may be inserted for free, and when single-qubit gates are also considered part of the budget. In each case, we build on recent work by Li and Guan and show that there are polynomial-time reductions from Hamiltonian path in grid graphs to these decision problems, using a number of qubits quadratic in the number of grid vertices.