Efficient training of a 128-modes 3D continuously coupled photonic chip via limited quantum resources
Denis Stanev, Simone Di Micco, Francesco Hoch, Taira Giordani, Nicolò Spagnolo, Marco Gardina, Andrea Crespi, Francesco Ceccarelli, Roberto Osellame, Fabio Sciarrino
Integrated photonics provides a promising route towards the development of large-scale, stable and low-loss quantum hardware. Existing implementations of universal quantum photonic chips generally rely on architectures consisting of localised interactions between the modes that can be programmed with known algorithms to implement specific operations. Recent advances have shown that interferometers based on 3D continuously coupled waveguide arrays may allow to significantly scale up the number of modes with reduced overhead. However, for this class of devices, optimal strategies to set the controllable parameters and obtain the desired transformation have not been demonstrated generally. In this work, we report the use of a machine learning algorithm driven by quantum data to program the operation of a reconfigurable three-dimensional continuously coupled photonic device comprising 128 modes. We show experimentally the capability of reaching a target unitary matrix, among those achievable by the device, through a limited number of one- and two-photon measurements. Our results demonstrate that this approach results to be effective in the presence of noise and with a limited amount of resources, also allowing to partially compensate imperfections in the experimental setup. This method can thus represent a viable route towards programming large scale integrated photonic devices, unlocking the possibility of controlling photonic systems for which an analytical decomposition is not trivial.
Integrated photonics provides a promising route towards the development of large-scale, stable and low-loss quantum hardware. Existing implementations of universal quantum photonic chips generally rely on architectures consisting of localised interactions between the modes that can be programmed with known algorithms to implement specific operations. Recent advances have shown that interferometers based on 3D continuously coupled waveguide arrays may allow to significantly scale up the number of modes with reduced overhead. However, for this class of devices, optimal strategies to set the controllable parameters and obtain the desired transformation have not been demonstrated generally. In this work, we report the use of a machine learning algorithm driven by quantum data to program the operation of a reconfigurable three-dimensional continuously coupled photonic device comprising 128 modes. We show experimentally the capability of reaching a target unitary matrix, among those achievable by the device, through a limited number of one- and two-photon measurements. Our results demonstrate that this approach results to be effective in the presence of noise and with a limited amount of resources, also allowing to partially compensate imperfections in the experimental setup. This method can thus represent a viable route towards programming large scale integrated photonic devices, unlocking the possibility of controlling photonic systems for which an analytical decomposition is not trivial.
Integrated photonic technologies have recently shown significant advances, enabling the possibility to implement reconfigurable interferometers with increasing size. One of the main tasks to fully exploit the capabilities of reconfigurable integrated interferometers is the possibility to precisely program their operation to perform a desired target unitary. While recipes are known for circuit layouts based on a cascade of beam-splitter and phase-shifter operations, a methodology applicable for reconfigurable continuously-coupled waveguide arrays is currently missing. Here, we devise a machine learning based approach for this task, using a black box methodology that does not rely on precise a-priori modeling of the circuit internal architectures. We verify the effectiveness and the robustness of this approach via numerical simulations on different continuously-coupled waveguides layouts, either with planar or 3D structures. The proposed method makes use of a limited number of single- and two-photon measurements, making it suitable for optical quantum information processing. The obtained results open the perspective of employing this methodology as an effective tool to program the operation of integrated interferometers designed via different architectures.
Integrated quantum photonics has emerged as one of the leading platforms for scaling quantum information processing, offering compact, stable, and low-loss hardware with precise phase and mode control. Advances in integrated photonics architectures and active programmability now enable complex, high-dimensional transformations essential for quantum advantage tasks. We introduce an integrated, reconfigurable 3D photonic device with 128 modes for manipulation of single-photon quantum states (Qolossus 3D). Leveraging a continuously coupled architecture and thermo-optic programmability, the platform implements reconfigurable unitary transformations at unprecedented scale for integrated quantum optics. Exploiting indistinguishable single photons demultiplexed from a quantum dot source, we perform Boson Sampling across the large-dimensional chip and analyse the resulting output distributions for up to 4 photons. We then exploit it to demonstrate randomness generation via Boson Sampling. Agreement with theoretical predictions validates both the device's reconfigurable operation and the generation of random numbers. Our results highlight the scalability, stability, and precise control of integrated photonics for quantum information processing.
Abstract Boson Sampling is a computational paradigm representing one of the most viable and pursued approaches to demonstrate the regime of quantum advantage. Recent results have shown significant technological leaps in single-photon generation and detection, leading to progressively larger instances of Boson Sampling experiments in different photonic systems. However, a crucial requirement for a fully-fledged platform solving this problem is the capability of implementing large-scale interferometers, that must simultaneously exhibit low losses, high degree of reconfigurability and the realization of arbitrary transformations. In this work, we move a step forward in this direction by demonstrating the adoption of a compact and reconfigurable 3D-integrated platform for photonic Boson Sampling. We perform 3- and 4-photon experiments by using such platform, showing the possibility of programming the circuit to implement a large number of unitary transformations. These results show that such compact and highly-reconfigurable layout can be scaled up to experiments with larger number of photons and modes, and can provide a viable direction for hybrid computing with photonic processors.
The growing computational demands of classical neural networks have intensified the search for energy-efficient and powerful computational alternatives. Quantum neural networks (QNNs) implemented on integrated photonic platforms offer a compelling avenue, offering exceptional computational power enhancements, with inherent programmability and scalability of integrated architectures. A critical challenge, however, is implementing the fundamental non-unitary and nonlinear activation function of QNNs within a linear quantum photonic system. Existing strategies, such as the adding ancillary qubits and measurement-based feedback or forward are constrained by high qubit resource costs, overhead devices, and poor cascadability. Here, we propose a novel deep photonic QNN with an expanded computational Hilbert space via input replication and mode expansion, which enables the realization of effective non-unitary and nonlinear activation on a linear programmable quantum photonic chip. This approach eliminates the need for physical ancillary qubits, measurement-induced qubit consumption and the measurement device burden, thereby significantly reduce resource costs. The fabricated chip integrates four high-quality entanglement sources and a programmable high-dimensional interferometric network, enabling a two-hidden-layer QNN that exhibits dimension-enhanced expressivity over the existing QNN architectures. We demonstrate its capabilities across diverse tasks, including nonlinear classification, image generation, and quantum Gibbs state preparation. This work establishes a scalable and efficient architecture toward practical quantum deep learning systems capable of tackling problems beyond the reach of classical computation.
Photonic integrated circuits offer a compact and stable platform for generating, manipulating, and detecting light. They are instrumental for classical and quantum applications. Imperfections stemming from fabrication constraints, tolerances, and operation wavelength impose limitations on the accuracy and thus utility of current photonic integrated devices. Mitigating these imperfections typically necessitates a model of the underlying physical structure and the estimation of parameters that are challenging to access. Direct solutions are currently lacking for mesh configurations extending beyond trivial cases. We introduce a scalable and innovative method to characterize photonic chips through an iterative machine learning-assisted procedure. Our method is based on a clear-box approach that harnesses a fully modeled virtual replica of the photonic chip to characterize. The process is sample-efficient and can be carried out with a continuous-wave laser and powermeters. The model estimates individual passive phases, crosstalk, beamsplitter reflectivity values, and relative input/output losses. Building upon the accurate characterization results, we mitigate imperfections to enable enhanced control over the device. We validate our characterization and imperfection mitigation methods on a 12-mode Clements-interferometer equipped with 126 phase shifters, achieving beyond state-of-the-art chip control with an average 99.77% amplitude fidelity on 100 implemented Haar-random unitary matrices.
Analyzing quantum systems is essential for quantum information processing, but can require exponentially many measurements without exploiting the structure of the system or task. Quantum machine learning offers a promising way to reduce this cost by learning from quantum data. Here, we theoretically establish a framework for efficient quantum-state classification and experimentally demonstrate the resulting scheme on a programmable photonic processor. Our analysis links learning efficiency to the structure of quantum data, without relying on a physical description tailored to each task. We derive sufficient conditions for accurate classification with a number of measurements polynomial in system size. We apply this guarantee to a resource problem in continuous-variable (CV) quantum computing: classifying stellar rank, a measure of non-Gaussianity. Experimentally, we implement the classification of single-mode CV quantum states with stellar rank zero and one. This is enabled by developing a programmable CV photonic processor capable of preparing and processing diverse Gaussian and non-Gaussian states and performing virtual projection onto such states, going beyond the Gaussian-only capabilities of most existing photonic platforms. The experiment demonstrates accurate classification despite experimental imperfections. Our results establish a theory-guided and experimentally validated framework for quantum-state classification that can be implemented on quantum devices available today.