arXiv:2611.01214
Cooling-path-selected self-assembly of telecom InAsP quantum dots
Yiteng Zhang, Doaa Abdelbarey, Markus Etzkorn, Zenghui Jiang, Ankita Choudhary, Andreas Schaate, Tom Fandrich, Xin Cao, Chenxi Ma, Arijit Chakraborty, Eddy Patrick Rugeramigabo, Michael Zopf, Fei Ding
Abstract
Epitaxial quantum dots are leading solid-state sources of quantum light, but reproducible growth on indium phosphide (InP) remains challenging because dot-formation windows are narrow and emission wavelengths are difficult to predict. Here we report a new epitaxial route for InAsP quantum dots on InP(001), in which the cooling path selects the final morphology without intentional deposition of group-III dot material. High-temperature As exposure forms a shallow near-surface InAsP layer through As-P exchange; the cooling path and continued As supply determine whether three-dimensional islands form. Surface-sensitive spectroscopy shows near-surface As enrichment, while cross-sectional STEM/EELS identifies graded, As-rich InAsP islands. The capped emitters span 1.2-1.6 micrometers, with single-photon emission observed up to 100 K. Across 20 wafers, the surface-effective exchange dose D provides a practical calibration for targeting the median emission wavelength. These results establish cooling as an active epitaxial step for telecom InAsP quantum-dot formation and wavelength control.
AI Summary
The paper asks how cooling history controls quantum-dot formation from an As–P-exchanged InP surface, and whether this provides a route to wavelength-calibrated telecom emitters without intentional deposition of group-III dot material. High-temperature As exposure creates a shallow InAsP layer; subsequent temperature–time and As-flux conditions select the final morphology. Growth-interruption controls show that rapid cooling leaves nearly flat surfaces or shallow protrusions, while slow cooling under continued As exposure, followed by a low-temperature hold, produces large islands. As-off cooling from the same high-temperature stage suppresses island formation. RHEED tracks the surface evolution, angle-resolved XPS establishes near-surface As enrichment, and cross-sectional STEM/EELS identifies graded, As-rich InAsP islands with continuous lattice planes across the observed interface. Capped samples emit across 1.2–1.6 $\mu$m. For one isolated emitter near 1287 nm, fitted, non-background-corrected autocorrelation gives $g^{(2)}(0)=0.07$ at 1.6 K and below 0.25 at 80 and 100 K; its effective decay lifetime is approximately 1.6 ns. Across 20 As-on-cooled wafers, an empirical surface-effective exchange dose correlates with median emission wavelength; grouped means red-shift monotonically, with saturation described by a fit approaching 1538 nm. This is a calibration for the tested conditions, not a kinetic law or retained-As measurement. AFM interruption endpoints do not establish the nucleation time, and the controls do not identify a unique atomistic pathway. Size and composition contributions to wavelength shifts remain unresolved; applicability to other material systems is untested.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
- Comments
- 9 pages, 4 figures, 1 table. Preprint version