Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.41690

A Preconditioned Quantum Linear Solver for Periodic Two-Phase Heat Conduction with Mesh-Independent Condition Number

Krishnan Suresh

Published Oct 30, 2026• 0 citations
arXivHTMLPDF

Abstract

We consider here computational homogenization of a periodic two-phase conduction problem. Quantum linear-system algorithms for its finite element discretization are limited by the condition number of the stiffness matrix. This condition number grows quadratically with the number of elements per side. Classically, preconditioning by the homogeneous (single-phase) operator bounds the condition number by the conductivity contrast, for every mesh size. On a quantum computer, however, a preconditioner encoded as a separate factor multiplies the subnormalizations, and the quadratic dependency returns. In this paper, we absorb the closed-form inverse square root of the homogeneous operator into the finite element factors. The preconditioned operator then becomes the product of a norm-preserving gradient operator $\mat{V}$, a diagonal matrix of scaled conductivities, and $\mat{V}^T$. Each factor has norm at most one. The block encoding therefore has subnormalization one, and its condition number is bounded by just the conductivity contrast, for every mesh size and in every dimension. The operator $\mat{V}$ is applied as a quantum Fourier transform, a small rotation at each wavenumber, and an inverse transform. Quantum singular value transformation then block-encodes the inverse of the preconditioned operator. We test the method numerically on three periodic cells with up to $10^6$ unknowns. The results confirm that the condition number does not depend on the mesh, and the energy-norm error of the inverse is below the polynomial tolerance at every mesh. On meshes of $4 \times 4$ and $8 \times 8$ elements, we also build the entire inverse as one Qiskit circuit and simulate it by state vector, with the rotation at each wavenumber built from uniformly controlled rotations. The output state agrees with the finite element solution to within the polynomial tolerance.

DOI
10.48550/arxiv.2610.41690

Related papers

Preconditioned block encodings for quantum linear systems

Leigh B. Lapworth, Christoph Sünderhauf

Abstract Quantum linear system solvers like the quantum singular value transformation (QSVT) require a block encoding of the system matrix A within a unitary operator UA . Unfortunately, block encoding often results in significant subnormalisation and increase in the matrix’s effective condition number κ, affecting the efficiency of solvers. Matrix preconditioning is a well-established classical technique to reduce κ by multiplying A by a preconditioner P. Here, we study quantum preconditioning for block encodings. We consider four preconditioners and two encoding approaches: (a) separately encoding A and its preconditioner P, followed by quantum multiplication, and (b) classically multiplying A and P before encoding the product in U PA . Their impact on subnormalisation factors and condition number κ are analysed using practical matrices from computational fluid dynamics (CFD). Our results show that (a) quantum multiplication introduces excessive subnormalisation factors, negating improvements in κ. We study preamplified quantum multiplication to reduce subnormalisation. Conversely, we see that (b) encoding of the classical product can significantly improve the effective condition number using the sparse approximate inverse preconditioner with infill. Further, we introduce a new matrix filtering technique that reduces the circuit depth without adversely affecting the matrix solution. We apply these methods to reduce the number of QSVT phase factors by a factor of 25 for an example CFD matrix of size 1024 × 1024.

arXiv:2502.20908•Quantum Science and Technology•Oct 3, 2025•12 citations

Quantum Domain Decomposition for Preconditioning the Finite Element Method

Elise Fressart, Michel Nowak, Nicole Spillane

Even in cases where quantum linear solvers provide significant speedup compared to their classical counterparts, their performance depends on some of the same parameters. In particular, the condition number of the matrix which is to be inverted is a decisive parameter. A well known classical, and now quantum, remedy is to precondition the linear system $A x = b$ by premultiplying it by a matrix $H$ in such a way that the condition number of $HA$ is significantly smaller than the condition number of $A$. In this work, we focus on a family of preconditioners called domain decomposition. First, we prove that it is feasible to apply quantum domain decomposition. We provide upper bounds for the block-encoding parameters of the Poisson problem discretized by the finite element method and preconditioned by the two-level Additive Schwarz preconditioner (one of the most fundamental domain decomposition techniques). From these bounds, we deduce the complexity of the quantum linear system solver. Second, we focus on a particular choice of local solver within the domain decomposition preconditioner by applying recent work by [Deiml and Peterseim, \textit{Math. Comput.}, 2025] on the Bramble--Pasciak--Xu (BPX) preconditioner. Finally, we provide details on how the operators are implemented.

math.NACross-listedarXiv:2605.26090•May 26, 2026•1 citation

Quantum preconditioning method for finite difference discretizations of the Poisson equation via Schrödingerization

Shi Jin, Nana Liu, Chuwen Ma +1 more

We present a quantum preconditioning framework for solving linear systems arising from a finite difference discretization of the Poisson equation. It is based on the combination of the Schrödingerization technique \cite{JLY22b,JLYPRL24} and the BPX multilevel preconditioner in order to achieve near-optimal complexity. The Schrödingerization technique transforms linear partial and ordinary differential equations into Schrödinger-type systems with unitary evolution in one higher dimension, making them suitable for quantum simulation. A key contribution is a structure-aware construction of the block-encoding for the symmetrically preconditioned matrix $A_S = S^\top A S$, where $A$ is the stiffness matrix and $S$ encodes the BPX preconditioner in factored form. By establishing a novel commuting identity, we avoid the unfavorable normalization scaling that would otherwise arise from naive multiplication of block-encodings. This yields an exact block-encoding of $A_S$ with normalization $\mathcal{O}(d^2(L+1))$, where $d$ is the spatial dimension and $L$ is the number of levels. Combined with the Schrödingerization-based Hamiltonian simulation, the overall quantum algorithm achieves a query complexity of $\mathcal{O}\big(\mathrm{poly}(d)\varepsilon^{-1} \mathrm{polylog}(\varepsilon^{-1}) \big)$ for estimating linear functionals of the solution to a given tolerance $\varepsilon$.

arXiv:2505.06866•May 11, 2025•16 citations

Quantum realization of the finite element method

M. Deiml, Daniel Peterseim

This paper presents a quantum algorithm for the solution of prototypical second-order linear elliptic partial differential equations discretized by d d -linear finite elements on Cartesian grids of a bounded d d -dimensional domain. An essential step in the construction is a BPX preconditioner, which transforms the linear system into a sufficiently well-conditioned one, making it amenable to quantum computation. We provide a constructive proof demonstrating that, for any fixed dimension, our quantum algorithm can compute suitable functionals of the solution to a given tolerance t o l \mathtt {tol} with an optimal complexity of order t o l − 1 \mathtt {tol}^{-1} up to logarithmic terms, significantly improving over existing approaches. Notably, this approach does not rely on the regularity of the solution and achieves a quantum advantage over classical solvers already in two dimensions, whereas prior quantum methods required at least four dimensions for asymptotic benefits. We further detail the design and implementation of a quantum circuit capable of executing our algorithm, present simulator results, and report numerical experiments on current quantum hardware, confirming the feasibility of preconditioned finite element methods for near-term quantum computing.

arXiv:2403.19512•Mathematics of Computation•Aug 14, 2025•30 citations

Exponential Reduction of Mesh Dependence in Quantum Estimation of Parabolic PDE Observables

Xiantao Li

Can a quantum PDE algorithm avoid the polynomial cost of resolving a fine spatial mesh? For standard fixed-order discretizations, direct classical methods require work polynomial in $h^{-1}$, or equivalently in the number of spatial degrees of freedom $N_h=Θ(h^{-d})$. Direct quantum implementations of a parabolic semigroup still have coherent complexity $\widetilde{\mathcal O}(\sqrt{T}/h)$, and gradient-dependent observables such as heat flux and dissipation introduce additional mesh dependence. Decay of the solution norm will further suppress the postselection probability for preparing a normalized final state. We develop a multilevel quantum algorithm that estimates linear and quadratic observables $directly$ and places the fine--coarse cancellation inside the circuit before measurement. A contour-based LCU reconstructs each target-time correction from a coherent family of shifted resolvent differences. Rather than block encoding the fine and coarse inverses separately, we encode their difference through a shifted Ritz--Schur factorization, exposing its $\mathcal O(h_\ell^2)$ two-grid normalization. For Fourier hierarchies, the corresponding SELECT oracle consists of a quantum Fourier or sine transform, a spectral-band selector, and reversible diagonal arithmetic. We also give a non-Fourier realization based on energy-orthogonal dyadic midpoint details in one dimension, together with structured tensor-product extensions under fixed-rank coefficient and access assumptions. For readouts with derivative order $0\leχ\le2$, optimized amplitude estimation removes $all$ polynomial dependence on the finest mesh size. Under the stated access assumptions, both linear and quadratic observables can be estimated with complexity $\widetilde{\mathcal O}(1+(Tε)^{-1})$, with only polylogarithmic dependence on $h^{-1}$.

quant-pharXiv:2607.18113•Jul 21, 2026•2 citations

Schrödingerization for quantum linear systems problems

Yin Yang, Yue Yu, Long Zhang

We develop a Schrödingerization algorithm for quantum linear systems problems in two higher dimensions. The earlier LC-Schrödingerization approach represents the solution as a time integral of a homogeneous convection response and implements this integral by a linear combination of unitaries (LCU) over evolution times. We instead use Duhamel's principle to incorporate the integral into an inhomogeneous convection equation with zero initial data. Fourier projection in the convection variable and Schrödingerization in a second auxiliary variable then realize the solution without the separate LCU step. A joint choice of the kernel and recovery procedure gives an evolution time independent of the target accuracy, a uniformly bounded $L^2$ kernel normalization, and accurate recovery on a fixed interval. We establish the periodization and discretization bounds and analyze the interval recovery probability. With block preconditioning, we retain a single logarithmic precision factor and obtain linear condition-number dependence without variable-time amplitude amplification. Under exact oracle access and given a valid constant-factor solution-norm estimate, the algorithm uses $\mathcal O(κ_A\log(1/\varepsilon))$ queries to each original input oracle, with constant success probability and $\ell^2$ state error at most $\varepsilon$. The matrix-query bound matches the standard worst-case scaling when the supplied norm bounds are tight. UnitaryLab simulations on positive-definite and indefinite systems demonstrate the solution accuracy and probability gain from interval recovery.

quant-pharXiv:2609.25660•Sep 23, 2026•1 citation
We consider here computational homogenization of a periodic two-phase conduction problem. Quantum linear-system algorithms for its finite element discretization are limited by the condition number of the stiffness matrix. This condition number grows quadratically with the number of elements per side. Classically, preconditioning by the homogeneous (single-phase) operator bounds the condition number by the conductivity contrast, for every mesh size. On a quantum computer, however, a preconditioner encoded as a separate factor multiplies the subnormalizations, and the quadratic dependency returns. In this paper, we absorb the closed-form inverse square root of the homogeneous operator into the finite element factors. The preconditioned operator then becomes the product of a norm-preserving gradient operator \matV\mat{V}\matV, a diagonal matrix of scaled conductivities, and \matVT\mat{V}^T\matVT. Each factor has norm at most one. The block encoding therefore has subnormalization one, and its condition number is bounded by just the conductivity contrast, for every mesh size and in every dimension. The operator \matV\mat{V}\matV is applied as a quantum Fourier transform, a small rotation at each wavenumber, and an inverse transform. Quantum singular value transformation then block-encodes the inverse of the preconditioned operator. We test the method numerically on three periodic cells with up to 10610^6106 unknowns. The results confirm that the condition number does not depend on the mesh, and the energy-norm error of the inverse is below the polynomial tolerance at every mesh. On meshes of 4×44 \times 44×4 and 8×88 \times 88×8 elements, we also build the entire inverse as one Qiskit circuit and simulate it by state vector, with the rotation at each wavenumber built from uniformly controlled rotations. The output state agrees with the finite element solution to within the polynomial tolerance.
Abstract Quantum linear system solvers like the quantum singular value transformation (QSVT) require a block encoding of the system matrix A within a unitary operator UA . Unfortunately, block encoding often results in significant subnormalisation and increase in the matrix’s effective condition number κ, affecting the efficiency of solvers. Matrix preconditioning is a well-established classical technique to reduce κ by multiplying A by a preconditioner P. Here, we study quantum preconditioning for block encodings. We consider four preconditioners and two encoding approaches: (a) separately encoding A and its preconditioner P, followed by quantum multiplication, and (b) classically multiplying A and P before encoding the product in U PA . Their impact on subnormalisation factors and condition number κ are analysed using practical matrices from computational fluid dynamics (CFD). Our results show that (a) quantum multiplication introduces excessive subnormalisation factors, negating improvements in κ. We study preamplified quantum multiplication to reduce subnormalisation. Conversely, we see that (b) encoding of the classical product can significantly improve the effective condition number using the sparse approximate inverse preconditioner with infill. Further, we introduce a new matrix filtering technique that reduces the circuit depth without adversely affecting the matrix solution. We apply these methods to reduce the number of QSVT phase factors by a factor of 25 for an example CFD matrix of size 1024 × 1024.
Even in cases where quantum linear solvers provide significant speedup compared to their classical counterparts, their performance depends on some of the same parameters. In particular, the condition number of the matrix which is to be inverted is a decisive parameter. A well known classical, and now quantum, remedy is to precondition the linear system Ax=bA x = bAx=b by premultiplying it by a matrix HHH in such a way that the condition number of HAHAHA is significantly smaller than the condition number of AAA. In this work, we focus on a family of preconditioners called domain decomposition. First, we prove that it is feasible to apply quantum domain decomposition. We provide upper bounds for the block-encoding parameters of the Poisson problem discretized by the finite element method and preconditioned by the two-level Additive Schwarz preconditioner (one of the most fundamental domain decomposition techniques). From these bounds, we deduce the complexity of the quantum linear system solver. Second, we focus on a particular choice of local solver within the domain decomposition preconditioner by applying recent work by [Deiml and Peterseim, \textit{Math. Comput.}, 2025] on the Bramble--Pasciak--Xu (BPX) preconditioner. Finally, we provide details on how the operators are implemented.
We present a quantum preconditioning framework for solving linear systems arising from a finite difference discretization of the Poisson equation. It is based on the combination of the Schrödingerization technique \cite{JLY22b,JLYPRL24} and the BPX multilevel preconditioner in order to achieve near-optimal complexity. The Schrödingerization technique transforms linear partial and ordinary differential equations into Schrödinger-type systems with unitary evolution in one higher dimension, making them suitable for quantum simulation. A key contribution is a structure-aware construction of the block-encoding for the symmetrically preconditioned matrix AS=S⊤ASA_S = S^\top A SAS​=S⊤AS, where AAA is the stiffness matrix and SSS encodes the BPX preconditioner in factored form. By establishing a novel commuting identity, we avoid the unfavorable normalization scaling that would otherwise arise from naive multiplication of block-encodings. This yields an exact block-encoding of ASA_SAS​ with normalization O(d2(L+1))\mathcal{O}(d^2(L+1))O(d2(L+1)), where ddd is the spatial dimension and LLL is the number of levels. Combined with the Schrödingerization-based Hamiltonian simulation, the overall quantum algorithm achieves a query complexity of O(poly(d)ε−1polylog(ε−1))\mathcal{O}\big(\mathrm{poly}(d)\varepsilon^{-1} \mathrm{polylog}(\varepsilon^{-1}) \big)O(poly(d)ε−1polylog(ε−1)) for estimating linear functionals of the solution to a given tolerance ε\varepsilonε.
This paper presents a quantum algorithm for the solution of prototypical second-order linear elliptic partial differential equations discretized by d d -linear finite elements on Cartesian grids of a bounded d d -dimensional domain. An essential step in the construction is a BPX preconditioner, which transforms the linear system into a sufficiently well-conditioned one, making it amenable to quantum computation. We provide a constructive proof demonstrating that, for any fixed dimension, our quantum algorithm can compute suitable functionals of the solution to a given tolerance t o l \mathtt {tol} with an optimal complexity of order t o l − 1 \mathtt {tol}^{-1} up to logarithmic terms, significantly improving over existing approaches. Notably, this approach does not rely on the regularity of the solution and achieves a quantum advantage over classical solvers already in two dimensions, whereas prior quantum methods required at least four dimensions for asymptotic benefits. We further detail the design and implementation of a quantum circuit capable of executing our algorithm, present simulator results, and report numerical experiments on current quantum hardware, confirming the feasibility of preconditioned finite element methods for near-term quantum computing.
Can a quantum PDE algorithm avoid the polynomial cost of resolving a fine spatial mesh? For standard fixed-order discretizations, direct classical methods require work polynomial in h−1h^{-1}h−1, or equivalently in the number of spatial degrees of freedom Nh=Θ(h−d)N_h=Θ(h^{-d})Nh​=Θ(h−d). Direct quantum implementations of a parabolic semigroup still have coherent complexity O~(T/h)\widetilde{\mathcal O}(\sqrt{T}/h)O(T​/h), and gradient-dependent observables such as heat flux and dissipation introduce additional mesh dependence. Decay of the solution norm will further suppress the postselection probability for preparing a normalized final state. We develop a multilevel quantum algorithm that estimates linear and quadratic observables directlydirectlydirectly and places the fine--coarse cancellation inside the circuit before measurement. A contour-based LCU reconstructs each target-time correction from a coherent family of shifted resolvent differences. Rather than block encoding the fine and coarse inverses separately, we encode their difference through a shifted Ritz--Schur factorization, exposing its O(hℓ2)\mathcal O(h_\ell^2)O(hℓ2​) two-grid normalization. For Fourier hierarchies, the corresponding SELECT oracle consists of a quantum Fourier or sine transform, a spectral-band selector, and reversible diagonal arithmetic. We also give a non-Fourier realization based on energy-orthogonal dyadic midpoint details in one dimension, together with structured tensor-product extensions under fixed-rank coefficient and access assumptions. For readouts with derivative order 0≤χ≤20\leχ\le20≤χ≤2, optimized amplitude estimation removes allallall polynomial dependence on the finest mesh size. Under the stated access assumptions, both linear and quadratic observables can be estimated with complexity O~(1+(Tε)−1)\widetilde{\mathcal O}(1+(Tε)^{-1})O(1+(Tε)−1), with only polylogarithmic dependence on h−1h^{-1}h−1.
We develop a Schrödingerization algorithm for quantum linear systems problems in two higher dimensions. The earlier LC-Schrödingerization approach represents the solution as a time integral of a homogeneous convection response and implements this integral by a linear combination of unitaries (LCU) over evolution times. We instead use Duhamel's principle to incorporate the integral into an inhomogeneous convection equation with zero initial data. Fourier projection in the convection variable and Schrödingerization in a second auxiliary variable then realize the solution without the separate LCU step. A joint choice of the kernel and recovery procedure gives an evolution time independent of the target accuracy, a uniformly bounded L2L^2L2 kernel normalization, and accurate recovery on a fixed interval. We establish the periodization and discretization bounds and analyze the interval recovery probability. With block preconditioning, we retain a single logarithmic precision factor and obtain linear condition-number dependence without variable-time amplitude amplification. Under exact oracle access and given a valid constant-factor solution-norm estimate, the algorithm uses O(κAlog⁡(1/ε))\mathcal O(κ_A\log(1/\varepsilon))O(κA​log(1/ε)) queries to each original input oracle, with constant success probability and ℓ2\ell^2ℓ2 state error at most ε\varepsilonε. The matrix-query bound matches the standard worst-case scaling when the supplied norm bounds are tight. UnitaryLab simulations on positive-definite and indefinite systems demonstrate the solution accuracy and probability gain from interval recovery.