Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.39615 · Open Research (University of Surrey)

Improving Energy Efficiency of Uplink RSMA via Rydberg Atomic Quantum Receiver

Xinya Shen, Zheng Chu, David Chieng, Chiew Foong Kwong, Qihao Peng, Zhengyu Zhu, Pei Xiao, Jianyue Zhu

Published Oct 29, 2026• 0 citations
arXivHTMLPDF

Abstract

This paper investigates an uplink rate-splitting multiple access (RSMA) network empowered by a Rydberg atomic quantum receiver (RAQR) to maximize energy efficiency (EE). To overcome the amplitude-only measurement limitation of the considered direct readout RAQR, we devise a phase alignment mechanism that linearizes the received signal while retaining full channel energy, thereby enabling tractable optimization. The resulting non-convex fractional EE problem is transformed via Dinkelbach's method. For IoT scenarios with symmetric rate requirements, we derive exact closed-form power allocation from the Karush-Kuhn-Tucker (KKT) conditions, which yields a globally optimal bisection search with negligible computational latency. For asymmetric rate requirements, we develop a generalized block coordinate descent-based power allocation (BCD-PA) framework that eliminates reliance on expensive interior-point solvers. We further propose a low-complexity paired allocation (LC-Paired) that exploits user pairing and closed-form bandwidth solutions via the Lambert-W function. Simulation results confirm that the KKT-based scheme attains the highest EE, while the BCD-PA offers a flexible complexity-performance trade-off. The LC-Paired scheme drastically reduces computational cost with only moderate EE degradation.

DOI
10.48550/arxiv.2610.39615

Related papers

Rydberg Atomic Quantum Receiver Empowered Hybrid Non-orthogonal Multiple Access

Xinya Shen, Zheng Chu, David Heng Tze Chieng +5 more

In this paper, we propose a novel uplink Hybrid Non-Orthogonal Multiple Access (NOMA) architecture assisted by Rydberg Atomic Quantum Receivers (RAQRs) to improve energy efficiency by addressing the physical constraints of atomic sensing. We formulate a joint optimization problem encompassing phase measurements and multi-user power allocation to minimize the total transmit power. This problem is particularly challenging due to the non-linear amplitude-only observations of atomic vapor cells. To decomposes the resulting non-convexity, we develop a hierarchical three-layer decomposition optimization framework that systematically decouples the global problem. The inner layer employs a customized Expectation Maximization-Gerchberg-Saxton (EM-GS) algorithm to resolve phase ambiguity and estimate equivalent channel gains. The middle layer derives closed-form optimal power allocation solutions via Karush-Kuhn-Tucker (KKT) conditions. The outer layer utilizes linear Minimum Mean Square Error (MMSE) detection for high-reliability signal recovery. Simulation results demonstrate the superiority of the proposed framework over conventional RF-based Hybrid NOMA. Notably, the atomic architecture achieves approximately a 93% reduction in total power consumption compared to Orthogonal Multiple Access (OMA) baselines while maintaining strict backward compatibility, thereby laying a solid foundation for practical deployment in next-generation green communication networks.

arXiv:2610.38451•Open Research (University of Surrey)•Oct 28, 2026•0 citations

From Active to Battery-Free: Rydberg Atomic Quantum Receivers for Self-Sustained SWIPT-MIMO Networks

Qihao Peng, Qu Luo, Zheng Chu +5 more

In this paper, we propose a hybrid simultaneous wireless information and power transfer (SWIPT)–enabled multiple-input multiple-output (MIMO) architecture, where the base station (BS) uses a conventional radio-frequency (RF) transmitter for downlink transmission and a Rydberg atomic quantum receiver (RAQR) for receiving uplink signals from Internet of Things (IoT) devices. To fully exploit this integration, we jointly design the transmission scheme and the power-splitting strategy to maximize the weighted sum rate, which leads to a non-convex problem. To address this challenge, we first derive closed-form lower bounds on the uplink achievable rates for maximum ratio combining (MRC) and zero-forcing (ZF), as well as on the downlink rate and harvested energy for maximum ratio transmission (MRT) and ZF precoding. Building upon these bounds, we propose an iterative algorithm relying on the best monomial approximation and geometric programming (GP) to solve the non-convex problem. Finally, simulations validate the tightness of our derived lower bounds and demonstrate the superiority of the proposed algorithm over benchmark schemes. Importantly, by integrating RAQR with SWIPT-enabled MIMO, the BS can reliably detect weak uplink signals from IoT devices powered only by harvested energy, enabling battery-free IoT networks.

arXiv:2510.15784•IEEE Journal on Selected Areas in Communications•Jan 1, 2026•1 citation

Rydberg Atomic Quantum MIMO Receivers for The Multi-User Uplink

Tierui Gong, Chau Yuen, Chong Meng Samson See +2 more

Rydberg atomic quantum receivers (RAQRs) have emerged as a promising solution for evolving wireless receivers from the classical to the quantum domain. To further unleash their great potential in wireless communications, we propose a flexible architecture for Rydberg atomic quantum multiple-input multiple-output (RAQ-MIMO) receivers in the multi-user uplink. Then the corresponding signal model of the RAQ-MIMO system is constructed by paving the way from quantum physics to classical wireless communications. Explicitly, we outline the associated operating principles and transmission flow. We also validate the linearity of our model and its feasible region. Based on our model, we derive closed-form asymptotic formulas for the ergodic achievable rate (EAR) of both the maximum-ratio combining (MRC) and zero-forcing (ZF) receivers operating in uncorrelated fading channels (UFC) and the correlated fading channels (CFC), as well as in the standard quantum limit (SQL) and photon shot limit (PSL) regimes, respectively. Furthermore, we unveil that the EAR scales logarithmically without bound with the product of effective number $N_{\text{atom}}$ and coherence time $T_2$ of the atomic ensemble in the SQL regime, but exhibits non-monotonic trade-off between the collective atomic enhancement and optical-depth-dependent attenuation in the PSL regime. More particularly, the transmit power of users can be scaled down quadratically with $N_{\text{atom}} τ$, $τ\in \{ T_2, \frac{ {\cal C} (Ω_{\ell}) }{A_p} \}$, but the EAR per user retains fixed, by increasing $N_{\text{atom}}$ while retaining the sensor number $M \propto N_{\text{atom}} τ$ in the SQL regime or $M \propto \exp \big( \frac{N_{\text{atom}} {\bar χ}}{A_p} \big)$ in the PSL regime....

arXiv:2506.01355•Jun 2, 2025•11 citations

Resource Allocation for Secure Rate-Splitting Multiple Access with Adaptive Beamforming

Tenghao Cai, Jia Zhang, Shihao Yan +3 more

Rate splitting multiple access (RSMA) is promising to achieve high spectral efficiency with a higher flexibility relative to non-orthogonal multiple access (NOMA) and orthogonal multiple access (OMA). In this paper, a novel RSMA-based secure transmission scheme with artificial noise (AN) and an adaptive beamforming is developed with the aim of maximizing the secrecy sum rate (SSR) of the considered system subject to specific constraints. The joint optimization of the power allocation between useful messages and AN signals, rate splitting between the two legitimate receivers, and the two mastering parameters of the beamforming design is tackled. To solve such a non-convex problem, we first analytically reveal some properties of the solution and then focus on an asymptotic scenario with a sufficiently large number of transmit antennas to derive closed-form expressions for the optimal power allocation coefficients. This enables us to develop an efficient method to identify the optimal rate splitting and beamforming parameters. Our examinations demonstrate that the proposed RSMA-based scheme outperforms two benchmark schemes in terms of achieving a higher SSR and the achievable performance gain is exceptional when the number of transmit antennas is small.

IEEE International Conference on Communications workshops•Jun 1, 2021•16 citations

BER-Aware Joint Parameter Optimization of Rydberg Atomic Quantum Receivers

Akash Kumar Mandal, Ming Shen

Rydberg-atom quantum receivers (RAQRs) offer highly sensitive RF reception, but their communication performance depends jointly on atomic response, optical transduction, receiver noise, bandwidth, and wireless-channel conditions. This paper develops a BER-aware communication-theoretic framework for superheterodyne RAQR-assisted wireless communication, linking four-level Rydberg-atom dynamics and coherent optical detection to multipath propagation and digital communication performance. Closed-form instantaneous and average SNR and BER expressions are derived for square Gray-coded $M$-QAM over correlated Rayleigh fading. The RAQR operating point is then jointly optimized over atomic, optical, RF, and geometric parameters using analytical block-wise updates within a fixed-point procedure subject to physical and bandwidth constraints. Numerical results demonstrate substantial gains in low-power reception, bandwidth utilization, robustness to detuning, fading and delay spread, outage, and communication coverage compared with conventional, advanced, and fixed-point RAQR receivers. The results demonstrate that BER-aware joint optimization translates the intrinsic sensitivity of Rydberg-atom sensing into tangible communication-level gains.

arXiv:2609.22236•Sep 3, 2026•1 citation

Rydberg Atomic Quantum Receivers for the Multi-User MIMO Uplink

Tierui Gong, Chau Yuen, Chong Meng Samson See +2 more

Rydberg atomic quantum receivers exhibit great potential in assisting classical wireless communications due to their outstanding advantages in detecting radio frequency signals. To realize this potential, we integrate a Rydberg atomic quantum receiver into a classical multi-user multiple-input multiple-output (MIMO) scheme to form a multi-user Rydberg atomic quantum MIMO (RAQ-MIMO) system for the uplink. To study this system, we first construct an equivalent baseband signal model, which facilitates convenient system design, signal processing and optimizations. We then study the ergodic achievable rates under both the maximum ratio combining (MRC) and zero-forcing (ZF) schemes by deriving their tight lower bounds. We next compare the ergodic achievable rates of the RAQ-MIMO and the conventional massive MIMO schemes by offering a closed-form expression for the difference of their ergodic achievable rates, which allows us to directly compare the two systems. Our results show that RAQ-MIMO allows the average transmit power of users to be$>25 \text{d B m}$lower than that of the conventional massive MIMO. Viewed from a different perspective, an extra$\sim 8.8$bits/s/Hz/user rate becomes achievable by ZF RAQ-MIMO.

arXiv:2501.18382•International Conference on Communications•Jun 8, 2025•10 citations
This paper investigates an uplink rate-splitting multiple access (RSMA) network empowered by a Rydberg atomic quantum receiver (RAQR) to maximize energy efficiency (EE). To overcome the amplitude-only measurement limitation of the considered direct readout RAQR, we devise a phase alignment mechanism that linearizes the received signal while retaining full channel energy, thereby enabling tractable optimization. The resulting non-convex fractional EE problem is transformed via Dinkelbach's method. For IoT scenarios with symmetric rate requirements, we derive exact closed-form power allocation from the Karush-Kuhn-Tucker (KKT) conditions, which yields a globally optimal bisection search with negligible computational latency. For asymmetric rate requirements, we develop a generalized block coordinate descent-based power allocation (BCD-PA) framework that eliminates reliance on expensive interior-point solvers. We further propose a low-complexity paired allocation (LC-Paired) that exploits user pairing and closed-form bandwidth solutions via the Lambert-W function. Simulation results confirm that the KKT-based scheme attains the highest EE, while the BCD-PA offers a flexible complexity-performance trade-off. The LC-Paired scheme drastically reduces computational cost with only moderate EE degradation.
In this paper, we propose a novel uplink Hybrid Non-Orthogonal Multiple Access (NOMA) architecture assisted by Rydberg Atomic Quantum Receivers (RAQRs) to improve energy efficiency by addressing the physical constraints of atomic sensing. We formulate a joint optimization problem encompassing phase measurements and multi-user power allocation to minimize the total transmit power. This problem is particularly challenging due to the non-linear amplitude-only observations of atomic vapor cells. To decomposes the resulting non-convexity, we develop a hierarchical three-layer decomposition optimization framework that systematically decouples the global problem. The inner layer employs a customized Expectation Maximization-Gerchberg-Saxton (EM-GS) algorithm to resolve phase ambiguity and estimate equivalent channel gains. The middle layer derives closed-form optimal power allocation solutions via Karush-Kuhn-Tucker (KKT) conditions. The outer layer utilizes linear Minimum Mean Square Error (MMSE) detection for high-reliability signal recovery. Simulation results demonstrate the superiority of the proposed framework over conventional RF-based Hybrid NOMA. Notably, the atomic architecture achieves approximately a 93% reduction in total power consumption compared to Orthogonal Multiple Access (OMA) baselines while maintaining strict backward compatibility, thereby laying a solid foundation for practical deployment in next-generation green communication networks.
In this paper, we propose a hybrid simultaneous wireless information and power transfer (SWIPT)–enabled multiple-input multiple-output (MIMO) architecture, where the base station (BS) uses a conventional radio-frequency (RF) transmitter for downlink transmission and a Rydberg atomic quantum receiver (RAQR) for receiving uplink signals from Internet of Things (IoT) devices. To fully exploit this integration, we jointly design the transmission scheme and the power-splitting strategy to maximize the weighted sum rate, which leads to a non-convex problem. To address this challenge, we first derive closed-form lower bounds on the uplink achievable rates for maximum ratio combining (MRC) and zero-forcing (ZF), as well as on the downlink rate and harvested energy for maximum ratio transmission (MRT) and ZF precoding. Building upon these bounds, we propose an iterative algorithm relying on the best monomial approximation and geometric programming (GP) to solve the non-convex problem. Finally, simulations validate the tightness of our derived lower bounds and demonstrate the superiority of the proposed algorithm over benchmark schemes. Importantly, by integrating RAQR with SWIPT-enabled MIMO, the BS can reliably detect weak uplink signals from IoT devices powered only by harvested energy, enabling battery-free IoT networks.
Rydberg atomic quantum receivers (RAQRs) have emerged as a promising solution for evolving wireless receivers from the classical to the quantum domain. To further unleash their great potential in wireless communications, we propose a flexible architecture for Rydberg atomic quantum multiple-input multiple-output (RAQ-MIMO) receivers in the multi-user uplink. Then the corresponding signal model of the RAQ-MIMO system is constructed by paving the way from quantum physics to classical wireless communications. Explicitly, we outline the associated operating principles and transmission flow. We also validate the linearity of our model and its feasible region. Based on our model, we derive closed-form asymptotic formulas for the ergodic achievable rate (EAR) of both the maximum-ratio combining (MRC) and zero-forcing (ZF) receivers operating in uncorrelated fading channels (UFC) and the correlated fading channels (CFC), as well as in the standard quantum limit (SQL) and photon shot limit (PSL) regimes, respectively. Furthermore, we unveil that the EAR scales logarithmically without bound with the product of effective number NatomN_{\text{atom}}Natom​ and coherence time T2T_2T2​ of the atomic ensemble in the SQL regime, but exhibits non-monotonic trade-off between the collective atomic enhancement and optical-depth-dependent attenuation in the PSL regime. More particularly, the transmit power of users can be scaled down quadratically with NatomτN_{\text{atom}} τNatom​τ, τ∈{T2,C(Ωℓ)Ap}τ\in \{ T_2, \frac{ {\cal C} (Ω_{\ell}) }{A_p} \}τ∈{T2​,Ap​C(Ωℓ​)​}, but the EAR per user retains fixed, by increasing NatomN_{\text{atom}}Natom​ while retaining the sensor number M∝NatomτM \propto N_{\text{atom}} τM∝Natom​τ in the SQL regime or M∝exp⁡(NatomχˉAp)M \propto \exp \big( \frac{N_{\text{atom}} {\bar χ}}{A_p} \big)M∝exp(Ap​Natom​χˉ​​) in the PSL regime....
Rate splitting multiple access (RSMA) is promising to achieve high spectral efficiency with a higher flexibility relative to non-orthogonal multiple access (NOMA) and orthogonal multiple access (OMA). In this paper, a novel RSMA-based secure transmission scheme with artificial noise (AN) and an adaptive beamforming is developed with the aim of maximizing the secrecy sum rate (SSR) of the considered system subject to specific constraints. The joint optimization of the power allocation between useful messages and AN signals, rate splitting between the two legitimate receivers, and the two mastering parameters of the beamforming design is tackled. To solve such a non-convex problem, we first analytically reveal some properties of the solution and then focus on an asymptotic scenario with a sufficiently large number of transmit antennas to derive closed-form expressions for the optimal power allocation coefficients. This enables us to develop an efficient method to identify the optimal rate splitting and beamforming parameters. Our examinations demonstrate that the proposed RSMA-based scheme outperforms two benchmark schemes in terms of achieving a higher SSR and the achievable performance gain is exceptional when the number of transmit antennas is small.
Rydberg-atom quantum receivers (RAQRs) offer highly sensitive RF reception, but their communication performance depends jointly on atomic response, optical transduction, receiver noise, bandwidth, and wireless-channel conditions. This paper develops a BER-aware communication-theoretic framework for superheterodyne RAQR-assisted wireless communication, linking four-level Rydberg-atom dynamics and coherent optical detection to multipath propagation and digital communication performance. Closed-form instantaneous and average SNR and BER expressions are derived for square Gray-coded MMM-QAM over correlated Rayleigh fading. The RAQR operating point is then jointly optimized over atomic, optical, RF, and geometric parameters using analytical block-wise updates within a fixed-point procedure subject to physical and bandwidth constraints. Numerical results demonstrate substantial gains in low-power reception, bandwidth utilization, robustness to detuning, fading and delay spread, outage, and communication coverage compared with conventional, advanced, and fixed-point RAQR receivers. The results demonstrate that BER-aware joint optimization translates the intrinsic sensitivity of Rydberg-atom sensing into tangible communication-level gains.
Rydberg atomic quantum receivers exhibit great potential in assisting classical wireless communications due to their outstanding advantages in detecting radio frequency signals. To realize this potential, we integrate a Rydberg atomic quantum receiver into a classical multi-user multiple-input multiple-output (MIMO) scheme to form a multi-user Rydberg atomic quantum MIMO (RAQ-MIMO) system for the uplink. To study this system, we first construct an equivalent baseband signal model, which facilitates convenient system design, signal processing and optimizations. We then study the ergodic achievable rates under both the maximum ratio combining (MRC) and zero-forcing (ZF) schemes by deriving their tight lower bounds. We next compare the ergodic achievable rates of the RAQ-MIMO and the conventional massive MIMO schemes by offering a closed-form expression for the difference of their ergodic achievable rates, which allows us to directly compare the two systems. Our results show that RAQ-MIMO allows the average transmit power of users to be>25d B m>25 \text{d B m}>25d B mlower than that of the conventional massive MIMO. Viewed from a different perspective, an extra∼8.8\sim 8.8∼8.8bits/s/Hz/user rate becomes achievable by ZF RAQ-MIMO.