Millimeter-wave and terahertz technologies offer new opportunities for high-capacity communications, sensing, and quantum systems, but electronic signal chains above 100 GHz are limited by weak sources, noisy receivers, and lossy interconnects. Photonic approaches mitigate these constraints by enabling chip-scale high-frequency components, yet existing implementations generally retain lossy off-chip electrical or free-space links, hindering dense and compact integration for cryogenic or space-constrained settings. Here, we show a monolithic lithium tantalate photonic chip, termed a signal core, which generates, modulates, routes, and detects continuous-wave signals at discrete frequencies between 100 GHz and 2.5 THz. The architecture integrates high-frequency functional modules on chip and uses exclusively fiber-based optical interfaces. Bidirectional coherent electro-optic conversion enables signal generation, detection, and nanosecond-scale amplitude and phase modulation, while micro-coplanar striplines interconnect the modules into an end-to-end signal chain on a single chip. Our modules achieve single-photon electro-optic coupling rates of g_0/2π=10 kHz and peak drive-power-normalized photon-flux conversion efficiencies of 1.0%/mW for generation and 0.5%/mW for detection. It also operates at 4 K in a dilution refrigerator through the same fiber-only optical links. Together, these capabilities establish an all-photonic platform for millimeter-wave-to-terahertz systems and offer a broadly applicable architecture for applications constrained by electrical-interconnect loss, heat load, and footprint.
AI Summary
The paper addresses whether millimeter-wave and terahertz generation, routing, modulation, and detection can be integrated into a cryogenically compatible signal chain without external high-frequency electrical links. It implements a lithium-tantalate chip with two optical racetrack resonators coupled to capacitively interconnected coplanar-stripline cavities. Optical difference-frequency generation drives the first cavity; electro-optic upconversion in the second produces optical sidebands for readout. All external signal interfaces are fiber-optic.
Room-temperature end-to-end operation is demonstrated at discrete frequencies between approximately 100 GHz and 2.56 THz; the highest-frequency sideband is approximately 2 dB above the local noise floor. Optical spectra, pump-power scaling, calibrated test structures, electromagnetic simulations, and a coupled-cavity conversion model establish the response and infer internal powers. Extracted single-photon coupling rates reach $g_0/2\pi\approx10$ kHz, with peak drive-power-normalized photon-flux conversion efficiencies of $1.0\%/\mathrm{mW}$ for generation and $0.5\%/\mathrm{mW}$ for detection. At 360 GHz, optical pump modulation yields approximately 10 ns amplitude transitions and coherent phase modulation. At approximately 4 K, operation extends to 576 GHz using 2.6 mW combined bus-waveguide pump power.
Operation is constrained by the approximately 36 GHz optical free spectral range, while increasing conductor and radiation losses suppress high-frequency cavity enhancement. Strong attenuation also limits the coupling-rate extraction model. Cryogenic reach is pump-power limited. No quantum device is integrated, and quantum-hardware applicability remains conditional on suppressing added noise and stray optical absorption; proposed 10–100 $\mu$W operation for weak readout tones is extrapolated from measured power scaling.
Little sign of AI-generated textMissing comparison
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
Millimeter-wave and terahertz technologies offer new opportunities for high-capacity communications, sensing, and quantum systems, but electronic signal chains above 100 GHz are limited by weak sources, noisy receivers, and lossy interconnects. Photonic approaches mitigate these constraints by enabling chip-scale high-frequency components, yet existing implementations generally retain lossy off-chip electrical or free-space links, hindering dense and compact integration for cryogenic or space-constrained settings. Here, we show a monolithic lithium tantalate photonic chip, termed a signal core, which generates, modulates, routes, and detects continuous-wave signals at discrete frequencies between 100 GHz and 2.5 THz. The architecture integrates high-frequency functional modules on chip and uses exclusively fiber-based optical interfaces. Bidirectional coherent electro-optic conversion enables signal generation, detection, and nanosecond-scale amplitude and phase modulation, while micro-coplanar striplines interconnect the modules into an end-to-end signal chain on a single chip. Our modules achieve single-photon electro-optic coupling rates of g_0/2π=10 kHz and peak drive-power-normalized photon-flux conversion efficiencies of 1.0%/mW for generation and 0.5%/mW for detection. It also operates at 4 K in a dilution refrigerator through the same fiber-only optical links. Together, these capabilities establish an all-photonic platform for millimeter-wave-to-terahertz systems and offer a broadly applicable architecture for applications constrained by electrical-interconnect loss, heat load, and footprint.
The paper addresses whether millimeter-wave and terahertz generation, routing, modulation, and detection can be integrated into a cryogenically compatible signal chain without external high-frequency electrical links. It implements a lithium-tantalate chip with two optical racetrack resonators coupled to capacitively interconnected coplanar-stripline cavities. Optical difference-frequency generation drives the first cavity; electro-optic upconversion in the second produces optical sidebands for readout. All external signal interfaces are fiber-optic.
Room-temperature end-to-end operation is demonstrated at discrete frequencies between approximately 100 GHz and 2.56 THz; the highest-frequency sideband is approximately 2 dB above the local noise floor. Optical spectra, pump-power scaling, calibrated test structures, electromagnetic simulations, and a coupled-cavity conversion model establish the response and infer internal powers. Extracted single-photon coupling rates reach g0/2π≈10 kHz, with peak drive-power-normalized photon-flux conversion efficiencies of 1.0%/mW for generation and 0.5%/mW for detection. At 360 GHz, optical pump modulation yields approximately 10 ns amplitude transitions and coherent phase modulation. At approximately 4 K, operation extends to 576 GHz using 2.6 mW combined bus-waveguide pump power.
Operation is constrained by the approximately 36 GHz optical free spectral range, while increasing conductor and radiation losses suppress high-frequency cavity enhancement. Strong attenuation also limits the coupling-rate extraction model. Cryogenic reach is pump-power limited. No quantum device is integrated, and quantum-hardware applicability remains conditional on suppressing added noise and stray optical absorption; proposed 10–100 μW operation for weak readout tones is extrapolated from measured power scaling.
Radio frequency (RF) radiation is a powerful tool in computing, communication, and sensing due to the ability to engineer strong electrical interactions. Within cryogenic systems, in particular, microwave (MW) frequency superconducting qubits have demonstrated promise as a platform for quantum computing, and MW and millimeter-wave (mmW) systems have been valuable tools in sensing. However, owing to their low energy, the weak, single-photon level signals employed by these systems suffer high sensitivity to thermal noise when they exit the thermal bath, as well as short attenuation lengths due to absorption and scattering in cables. Telecommunication frequency optical photons, meanwhile, have long propagation lengths and can be supported by low-loss optical fibers. The high photon energy makes signals insensitive to thermal noise, and the high frequency can allow many RF signals to be multiplexed onto a single optical carrier. Interfacing RF and optical radiation to leverage both strong interactions with macroscopic systems characteristic of electrical interactions and low-loss propagation characteristic of optical photons has been critical to realizing our global communication system. Leveraging the infrastructure developed to support this industry, such as single photon detectors, is attractive for scaling cryogenic RF systems. Coherent conversion processes, especially, can benefit a wide range of applications, especially in computing and sensing, by preserving quantum states, and retaining phase information necessary for quantum gates, and enable the use of measurement techniques that can increase detection sensitivity. This dissertation focuses on using the electro-optic effect in thin-film lithium niobate to form an efficient, coherent interface between radio- and telecommunication-frequency photons. Lithium niobate is an attractive platform due to its high electro-optic coefficient (approx. 30 pm/V), wide transparency window (DC to 400 THz), and ability to support low-loss optical waveguides (.2 dB/m), all of which deviate little from room temperature down to near-zero Kelvin environments. First, I explore the development of low-loss lithium niobate optical cavities and operation of lithium niobate waveguides at low temperatures. While lithium niobate is an electro-optic material with a DC response, using the electro-optic response at room temperature for stable biasing and low-frequency operation has remained a challenge. A temperature- and frequency-dependent study is conducted to identify lithium charge migration as a potential screening mechanism suppressed at low temperatures. Next, I explore the use of RF-cavity enhanced, triply resonant photonic molecules (created from two coupled low-loss optical cavities) for forming efficient electro-optic interfaces with microwave (3-10 GHz) and millimeter wave (100 GHz) radiation. In the microwave regime, I explore microwave-optical transduction for forming optical interfaces with microwave qubits, specifically focusing on superconducting qubits. The characterization of one such transducer is demonstrated, and the device is used to optically synthesize microwave signals at low temperatures, bypassing the need for input microwave control lines. Outlook for other interfaces, including optical photon mediated quantum information transfer, is discussed. At mmW frequencies, the triply resonant photonic molecule is explored for low-power ( mW) optical-frequency shifting.
Growing demands for timing precision in positioning systems, and resolution in atmospheric sensing and automotive radar, have extended receiver frontends into the millimetre-wave and THz regimes. At these frequencies, the noise performance of field-effect transistors used in low-noise amplifiers degrades rapidly due to parasitic effects, limited carrier mobility, hot electrons, and shot noise. Parametric transducers that couple electromagnetic signals to optical fields can offer quantum-limited sensitivity at room temperature. Electro-optic materials can enable receivers that transduce radiofrequency signals into optical phase shifts. Yet to date, room-temperature receivers using electro-optical detection have not attained a noise figure comparable to the electronic amplifiers. Here we demonstrate a room-temperature cavity electro-optic-based millimetre-wave receiver on a lithium tantalate photonic integrated circuit, achieving an on-chip photon-number transduction efficiency of 10%. The equivalent input-referred receiver-added noise temperatures reach 110K on-chip and 202−33+35K for the full system at 60.5 GHz, with noise figure matching state-of-the-art V-band electronic low-noise amplifiers. We resolve the thermal noise in cavity electro-optic transducers, showing that the system is limited by thermal photon occupation ($\sim$100) in the millimetre-wave cavity and optical vacuum noise, with no measurable excess noise. Our work demonstrates that integrated photonics can reach state-of-the-art electronic receiver noise performance while offering high-radiofrequency-power survivability and compatibility with remote optical readout. This establishes cavity electro-optics as a low-noise, electromagnetic interference-resilient, chip-scale receiver frontend for millimetre-wave applications, enabling scalable analogue processing in the optical domain.
Abstract Emerging communications and computing technologies will rely ever-more on expanding the useful radio frequency spectrum into the millimeter-wave and terahertz frequency range. Both classical and quantum applications would benefit from advancing integration and incorporation of millimeter-wave and electro-optic technologies into common devices, such as modulators. Here we demonstrate an integrated triply-resonant, superconducting electro-optic transducer. Our design incorporates an on-chip 107 GHz niobium titanium nitride superconducting resonator, modulating a thin-film lithium niobate optical racetrack resonator operating at telecom wavelengths. We observe a maximum photon transduction efficiency of η OE ≈ 0.82 × 10 −6 and an average single-photon electro-optic interaction rate of g 0 /2 π ≈ 0.7 kHz. We also present a study and analysis of the challenges associated with the design of integrated millimeter-wave resonators and propose possible solutions to these challenges. Our work paves the way for further advancements in resonant electro-optic technologies operating at millimeter-wave frequencies.
Electro-optic quantum coherent interfaces map the amplitude and phase of a quantum signal directly to the phase or intensity of a probe beam. At terahertz frequencies, a fundamental challenge is not only to sense such weak signals (due to a weak coupling with a probe in the near-infrared) but also to resolve them in the time domain. Cavity confinement of both light fields can increase the interaction and achieve strong coupling. Using this approach, current realizations are limited to low microwave frequencies. Alternatively, in bulk crystals, electro-optic sampling was shown to reach quantum-level sensitivity of terahertz waves. Yet, the coupling strength was extremely weak. Here, we propose an on-chip architecture that concomitantly provides subcycle temporal resolution and an extreme sensitivity to sense terahertz intracavity fields below 20 V/m. We use guided femtosecond pulses in the near-infrared and a confinement of the terahertz wave to a volume of V T H z ∼ 10 − 9 ( λ T H z / 2 ) 3 in combination with ultraperformant organic molecules ( r 33 = 170 p m / V ) and accomplish a record-high single-photon electro-optic coupling rate of g e o = 2 π × 0.043 G H z , 10,000 times higher than in recent reports of sensing vacuum field fluctuations in bulk media. Via homodyne detection implemented directly on chip, the interaction results into an intensity modulation of the femtosecond pulses. The single-photon cooperativity is C 0 = 1.6 × 10 − 8 , and the multiphoton cooperativity is C = 0.002 at room temperature. We show > 70 d B dynamic range in intensity at 500 ms integration under irradiation with a weak coherent terahertz field. Similar devices could be employed in future measurements of quantum states in the terahertz at the standard quantum limit, or for entanglement of subsystems on subcycle temporal scales, such as terahertz and near-infrared quantum bits.
The terahertz (THz) regime of electromagnetic radiation, spanning frequencies from 0.1 to tens of THz, has found widespread use in communication, sensing, quality control, and biomedical applications. Quantum realm of THz domain is, however, still at an earlier development stage and mostly referenced in the context of applied technologies for single-photon generation and detection, with rarer examples of exploration of quantum phenomena. Recent advances in cryogenic hybrid quantum systems suggest that THz radiation may play a pivotal role in emerging quantum technologies. These systems, which require operation at milliKelvin temperatures, offer new opportunities for quantum memory, frequency transduction, and precision measurements, with THz radiation enabling access to molecular vibrational, rotational, and librational transitions. Despite progress in THz components at low temperatures, there remains a critical gap in the systematic integration of THz technologies within sub-Kelvin cryogenic platforms such as dilution refrigerators and adiabatic demagnetization systems. This review presents a comprehensive roadmap for the development of THz photonics in extreme cryogenic environments, addressing implementation strategies, material considerations, waveguide and fiber technologies, and quantum-compatible detection schemes. We further highlight prospective applications in quantum optics, superconductivity, and fundamental physics, aiming to establish THz photonics as a versatile tool for controlling and probing quantum states in sub-Kelvin regimes.
The terahertz (THz) regime of electromagnetic radiation, spanning frequencies from 0.1 to tens of THz, has found widespread use in communication, sensing, quality control, and biomedical applications. Quantum realm of THz domain is, however, still at an earlier development stage and mostly referenced in the context of applied technologies for single-photon generation and detection, with rarer examples of exploration of quantum phenomena. Recent advances in cryogenic hybrid quantum systems suggest that THz radiation may play a pivotal role in emerging quantum technologies. These systems, which require operation at milliKelvin temperatures, offer new opportunities for quantum memory, frequency transduction, and precision measurements, with THz radiation enabling access to molecular vibrational, rotational, and librational transitions. Despite progress in THz components at low temperatures, there remains a critical gap in the systematic integration of THz technologies within sub-Kelvin cryogenic platforms such as dilution refrigerators and adiabatic demagnetization systems. This review presents a comprehensive roadmap for the development of THz photonics in extreme cryogenic environments, addressing implementation strategies, material considerations, waveguide and fiber technologies, and quantum-compatible detection schemes. We further highlight prospective applications in quantum optics, superconductivity, and fundamental physics, aiming to establish THz photonics as a versatile tool for controlling and probing quantum states in sub-Kelvin regimes.