Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.27335

Shot Allocation Strategies in Debugging Quantum Circuits

Era Thaqi, Coco Gong, Margaret Martonosi

quant-phSubmitted Oct 19, 2026• Announced Oct 21, 2026• 0 citations
arXivHTMLPDF

Abstract

Debugging quantum programs remains challenging due to the nature of quantum measurement. As quantum algorithms and systems scale, it is increasingly crucial to develop rigorous debugging and verification approaches. Statistical assertion-based debugging validates quantum program behavior through repeated circuit execution and statistical hypothesis testing, but existing frameworks treat shot count as a fixed input parameter, leaving the problem of optimal shot allocation across multiple mid-circuit assertions unexplored. To improve debugging efficiency by making better use of given shot counts, this paper proposes and evaluates four shot allocation strategies within the QDB quantum debugger implemented within the CUDA-Q framework. These allocation approaches: equal split, static weight allocation, adaptive entropy routing, and sequential retirement, use statistical approaches to test whether qubits have expected state characteristics at different points in execution. We evaluate these allocation strategies on different circuits, under both noise-free and depolarizing noise conditions. We show how adaptive strategies use shots efficiently by concentrating them on assertions with high uncertainty. This substantially reduces total shot usage while maintaining comparable debugging confidence.

AI Summary

The paper studies how to distribute a fixed total shot budget $B$ across multiple statistical assertion checkpoints in quantum-circuit debugging. It considers assertions about classical outcomes, uniform measurement distributions, and independence between registers, implemented in the QDB debugger within CUDA-Q. Four allocation strategies are compared: equal allocation of $B/m$ shots to each of $m$ checkpoints; fixed type-based weights of 10%, 40%, and 50% for classical, uniform, and product assertions; adaptive routing after an initial probe using 10% of the budget; and sequential allocation in small batches, retiring assertions once their outcomes are statistically decisive. Adaptive routing scores checkpoints using empirical entropy, entropy deficit relative to uniformity, or deviation from the entropy identity for independent registers. Evaluation covers four circuit benchmarks under noiseless and depolarizing-noise conditions, measuring wasted shots, false-positive rates, and detection power for inserted bugs. The reported improvement in detection power is up to 13%. Sequential retirement is reported to give the lowest wasted-shot counts and, under noise, the lowest false-positive rates. These conclusions are based on empirical comparisons rather than analytical allocation bounds. The experiments distinguish readily detected structural bugs from subtle distributional biases. An initialization bug involving $R_y(0.024)$ requires substantially more sampling, whereas omission of a final Hadamard layer in a Bernstein–Vazirani circuit is detected at low shot counts. The text provides no detailed numerical false-positive rates, statistical guarantees for adaptive stopping, or hardware evaluation.

Little sign of AI-generated textIncrementalSmall numerics onlyOverclaimsPossible error

Central claim may not hold: The abstract's claim of substantially fewer total shots at comparable confidence is not established by the body's qualitative fixed-budget and wasted-shot comparisons. The supplied figure contains no plotted results, and no numerical comparison substantiates the claimed improvement of up to 13% in bug-detection power. The entropy-routing scores quantify empirical violations rather than statistical uncertainty, potentially prioritizing obvious violations over subtle, difficult-to-detect bugs. The paper does not specify decision thresholds, a retirement rule with sequential error control, or numerical false-positive results sufficient to verify its confidence and reliability claims. A p-value of 1 or exact finite-sample agreement does not eliminate statistical ambiguity or justify accepting an assertion as validated, contrary to the paper's explanation of decisiveness.

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Comments
2 pages,1 figure, IEEE Quantum Week Poster Session

Related papers

Optimizing Run-Time Assertions for Quantum Circuit Debugging: A Depth–Ancilla Tradeoff

Karl Aaron Rudkowski, Abhoy Kole, Rolf Drechsler

Debugging quantum circuits is inherently challenging due to the probabilistic nature of quantum computation and the inability to directly observe intermediate states without disturbing the computation. Run-time assertion-based debugging is a promising approach to provide partial visibility into quantum programs by validating expected properties during execution. However, existing approaches often incur significant overhead in terms of gate count, circuit depth, and auxiliary qubits, limiting their applicability on resource-constrained quantum hardware. In this work, we propose a framework for optimizing run-time assertions in quantum circuits using dynamic circuit capabilities. Our approach leverages classically conditioned operations and repeated measurement-reset patterns to implement assertions efficiently while preserving the state of data qubits. Furthermore, we explore the tradeoff between circuit depth and the number of auxiliary qubits by dynamically distributing assertion components across a limited set of ancilla, enabling scalable assertion insertion while balancing hardware constraints such as measurement latency and reset overhead. Experimental evaluation on Quantum Phase Estimation (QPE) circuits demonstrates that our approach significantly reduces auxiliary qubit usage and gate overhead compared to existing methods, while maintaining effective fault detection and localization capabilities.

Proceedings•Sep 1, 2026•0 citations

Statistical Assertions for Debugging Quantum Circuits and States in CUDA-Q

Jocelyn Li, Ella Rubinshtein, Margaret Martonosi

As quantum computing continues to mature, more developers are designing, coding, and simulating quantum circuits. A challenge exists, however, in debugging quantum circuits, particularly as they scale in size and complexity. Given the lack of effective debugging workflows, developers are forced to manually inspect their circuits and analyze various quantum states, which is error-prone and time-consuming. In this research, we present a statistical assertion-based debugging workflow for CUDA-Q. CUDA-Q has gained popularity due to its ability to leverage GPUs to accelerate quantum circuit simulations; this allows circuits to scale to larger depths and widths, where they can be particularly hard to debug by hand. Inspired by and building from prior Qiskit-based debuggers, our work allows CUDA-Q users to verify quantum program correctness with greater ease. Through the insertion of statistical assertions within a quantum circuit, our tool provides valuable insights into the state of qubits at any point within a circuit, tracks their evolution, and helps detect deviations from expected behavior. Furthermore, we improve the reliability and accuracy of the product state assertion by using a combination of Fisher's exact test and the Monte Carlo Method instead of a chi-square test, and examine the impact of CUDA-Q's distinct kernel-based programming model on the design of our debugging tool. This work offers a practical solution to one of CUDA-Q's usability gaps, paving the way for more reliable and efficient quantum software development.

arXiv:2507.16255•IEEE International Conference on Quantum Computing and Engineering (QCE)•Aug 30, 2025•2 citations

How Many Shots Are Enough for a Quantum Circuit?

Giuseppe Bisicchia, Alessandro Bocci, Ernesto Pimentel +1 more

Quantum algorithms require repeated circuit executions, known as shots, to estimate output distributions accurately. Determining the minimal number of shots needed to meet a target accuracy is crucial to reduce costs and resource usage, especially on today's noisy and expensive quantum hardware. In this paper, we address the shot optimisation problem in a black-box setting, where no assumptions are made about the structure of the quantum circuit or the noise model of the backend. We introduce IncrementalExecution, a novel online framework that dynamically determines when to stop executing shots based on the principle of point of diminishing returns: the point at which additional shots no longer significantly alter the empirical distribution of a fixed circuit. The framework supports customisable policies for shot management, enabling flexible trade-offs between execution cost and result fidelity within static execution scenarios. We assess our proposal through an extensive experimental evaluation spanning 33,750 framework configurations across 180 unique static quantum circuit-backend combinations, for a total of 7.3M independent experiments. Unlike prior work that relies on problem-specific knowledge or algorithm-dependent assumptions (e.g., variational or adaptive workflows), our approach is applicable to a large set of static circuits and immediately deployable on current quantum cloud platforms.

quant-pharXiv:2606.16965•ACM Transactions on Quantum Computing•Jun 16, 2026•1 citation

How Many Shots Does It Take? A Noise-Aware Quantum Resource Allocation Framework

Prateek P. Kulkarni, Sumit K. Mandal

Any algorithm execution on quantum computers requires several repeated and costly executions (known as shots) to obtain reliable results. In this work, we propose a closed-form accurate analytical expression to determine optimal number of shots required for reliable execution of any algorithm on a quantum computer. We also present a theoretically grounded technique to distribute fixed shot budget across different partitions in a quantum circuit minimizing the total error. Our proposed analytical model helps to reduce the shots associated with reliable execution of quantum algorithms by about 58\% compared to current practice, in turn reducing the energy consumption by upto 62\%. Furthermore, our proposed optimal shot allocation technique across different partitions reduces total error by up to 73\% compared to conventional approaches.

quant-pharXiv:2607.24704•International Symposium on Low Power Electronics and Design (ISLPED)•Jul 28, 2026•0 citations

A Framework for the Efficient Evaluation of Runtime Assertions on Quantum Computers

Damian Rovara, Lukas Burgholzer, Robert Wille

The continuous growth of quantum computing and the increasingly complex quantum programs resulting from it lead to unprecedented obstacles in ensuring program correctness. Runtime assertions are, therefore, becoming a crucial tool in the development of quantum programs. They assist developers in the debugging process and help to test and verify the program. However, while assertions can be implemented in a straightforward manner on classical computers, physical limitations of quantum computers pose considerable challenges for the evaluation of quantum assertions. Access to the quantum state of a program is limited, execution time is expensive and noise can significantly distort measurement outcomes. To address these problems, this work proposes a framework that assists developers in the evaluation of runtime assertions on real quantum computers. It translates a variety of assertions into sets of measurements, reduces execution overhead where possible and evaluates the measurement results after the execution even in the presence of noise. This approach substantially aids developers in the debugging process, enabling efficient assertion-driven debugging even in large programs. The proposed framework is available as an open-source implementation at https://github.com/munich-quantum-toolkit/debugger

arXiv:2505.03885•IEEE International Conference on Quantum Software (QSW)•Jul 1, 2026•6 citations

Adaptive Shot Allocation for Recursive QAOA via Reinforcement Learning

Euimin Lee, Shiho Kim

Recursive QAOA (RQAOA) solves combinatorial optimization problems by using shallow quantum circuits to estimate pairwise correlations and recursively eliminate variables until a classical solver can handle the residual instance. Each elimination step requires measurement shots, and the total shot cost grows with the number of recursive stages. On near-term quantum devices, increasing shot counts can translate directly into greater exposure to hardware-level noise sources such as readout errors and decoherence, making shot-efficient execution not merely a cost-reduction measure but a factor with direct implications for solution reliability. While shot reduction has been studied broadly across NISQ algorithms, step-wise measurement control inside the recursive loop of RQAOA has received little attention. We formulate this step-wise allocation as a sequential decision problem and propose two strategies for depth-1 RQAOA on weighted Max-Cut instances. A hand-crafted heuristic assigns shots based on local indicators of step difficulty, and a tabular Double Q-learning agent learns a residual policy that adjusts this baseline under a Lagrangian-constrained objective. Both methods are evaluated under a fixed-cap fairness protocol that equalizes the per-step budget across all strategies, and the elimination rule itself is kept unchanged so that the contribution of adaptive measurement control can be isolated. On a diverse set of weighted graph instances spanning a range of sizes and structures, the heuristic reduces total shots by approximately 23% relative to uniform allocation, and the RL policy achieves a 36% reduction with a lower effective shots per success ratio than both baselines. The improvement persists on problem sizes not seen during training, suggesting that reinforcement learning can discover efficient, instance-adaptive measurement strategies in recursive quantum optimization.

quant-pharXiv:2605.26544•May 27, 2026•2 citations
Debugging quantum programs remains challenging due to the nature of quantum measurement. As quantum algorithms and systems scale, it is increasingly crucial to develop rigorous debugging and verification approaches. Statistical assertion-based debugging validates quantum program behavior through repeated circuit execution and statistical hypothesis testing, but existing frameworks treat shot count as a fixed input parameter, leaving the problem of optimal shot allocation across multiple mid-circuit assertions unexplored. To improve debugging efficiency by making better use of given shot counts, this paper proposes and evaluates four shot allocation strategies within the QDB quantum debugger implemented within the CUDA-Q framework. These allocation approaches: equal split, static weight allocation, adaptive entropy routing, and sequential retirement, use statistical approaches to test whether qubits have expected state characteristics at different points in execution. We evaluate these allocation strategies on different circuits, under both noise-free and depolarizing noise conditions. We show how adaptive strategies use shots efficiently by concentrating them on assertions with high uncertainty. This substantially reduces total shot usage while maintaining comparable debugging confidence.
The paper studies how to distribute a fixed total shot budget BBB across multiple statistical assertion checkpoints in quantum-circuit debugging. It considers assertions about classical outcomes, uniform measurement distributions, and independence between registers, implemented in the QDB debugger within CUDA-Q.
Four allocation strategies are compared: equal allocation of B/mB/mB/m shots to each of mmm checkpoints; fixed type-based weights of 10%, 40%, and 50% for classical, uniform, and product assertions; adaptive routing after an initial probe using 10% of the budget; and sequential allocation in small batches, retiring assertions once their outcomes are statistically decisive. Adaptive routing scores checkpoints using empirical entropy, entropy deficit relative to uniformity, or deviation from the entropy identity for independent registers.
Evaluation covers four circuit benchmarks under noiseless and depolarizing-noise conditions, measuring wasted shots, false-positive rates, and detection power for inserted bugs. The reported improvement in detection power is up to 13%. Sequential retirement is reported to give the lowest wasted-shot counts and, under noise, the lowest false-positive rates. These conclusions are based on empirical comparisons rather than analytical allocation bounds.
The experiments distinguish readily detected structural bugs from subtle distributional biases. An initialization bug involving Ry(0.024)R_y(0.024)Ry​(0.024) requires substantially more sampling, whereas omission of a final Hadamard layer in a Bernstein–Vazirani circuit is detected at low shot counts. The text provides no detailed numerical false-positive rates, statistical guarantees for adaptive stopping, or hardware evaluation.
Debugging quantum circuits is inherently challenging due to the probabilistic nature of quantum computation and the inability to directly observe intermediate states without disturbing the computation. Run-time assertion-based debugging is a promising approach to provide partial visibility into quantum programs by validating expected properties during execution. However, existing approaches often incur significant overhead in terms of gate count, circuit depth, and auxiliary qubits, limiting their applicability on resource-constrained quantum hardware. In this work, we propose a framework for optimizing run-time assertions in quantum circuits using dynamic circuit capabilities. Our approach leverages classically conditioned operations and repeated measurement-reset patterns to implement assertions efficiently while preserving the state of data qubits. Furthermore, we explore the tradeoff between circuit depth and the number of auxiliary qubits by dynamically distributing assertion components across a limited set of ancilla, enabling scalable assertion insertion while balancing hardware constraints such as measurement latency and reset overhead. Experimental evaluation on Quantum Phase Estimation (QPE) circuits demonstrates that our approach significantly reduces auxiliary qubit usage and gate overhead compared to existing methods, while maintaining effective fault detection and localization capabilities.
As quantum computing continues to mature, more developers are designing, coding, and simulating quantum circuits. A challenge exists, however, in debugging quantum circuits, particularly as they scale in size and complexity. Given the lack of effective debugging workflows, developers are forced to manually inspect their circuits and analyze various quantum states, which is error-prone and time-consuming. In this research, we present a statistical assertion-based debugging workflow for CUDA-Q. CUDA-Q has gained popularity due to its ability to leverage GPUs to accelerate quantum circuit simulations; this allows circuits to scale to larger depths and widths, where they can be particularly hard to debug by hand. Inspired by and building from prior Qiskit-based debuggers, our work allows CUDA-Q users to verify quantum program correctness with greater ease. Through the insertion of statistical assertions within a quantum circuit, our tool provides valuable insights into the state of qubits at any point within a circuit, tracks their evolution, and helps detect deviations from expected behavior. Furthermore, we improve the reliability and accuracy of the product state assertion by using a combination of Fisher's exact test and the Monte Carlo Method instead of a chi-square test, and examine the impact of CUDA-Q's distinct kernel-based programming model on the design of our debugging tool. This work offers a practical solution to one of CUDA-Q's usability gaps, paving the way for more reliable and efficient quantum software development.
Quantum algorithms require repeated circuit executions, known as shots, to estimate output distributions accurately. Determining the minimal number of shots needed to meet a target accuracy is crucial to reduce costs and resource usage, especially on today's noisy and expensive quantum hardware. In this paper, we address the shot optimisation problem in a black-box setting, where no assumptions are made about the structure of the quantum circuit or the noise model of the backend. We introduce IncrementalExecution, a novel online framework that dynamically determines when to stop executing shots based on the principle of point of diminishing returns: the point at which additional shots no longer significantly alter the empirical distribution of a fixed circuit. The framework supports customisable policies for shot management, enabling flexible trade-offs between execution cost and result fidelity within static execution scenarios. We assess our proposal through an extensive experimental evaluation spanning 33,750 framework configurations across 180 unique static quantum circuit-backend combinations, for a total of 7.3M independent experiments. Unlike prior work that relies on problem-specific knowledge or algorithm-dependent assumptions (e.g., variational or adaptive workflows), our approach is applicable to a large set of static circuits and immediately deployable on current quantum cloud platforms.
Any algorithm execution on quantum computers requires several repeated and costly executions (known as shots) to obtain reliable results. In this work, we propose a closed-form accurate analytical expression to determine optimal number of shots required for reliable execution of any algorithm on a quantum computer. We also present a theoretically grounded technique to distribute fixed shot budget across different partitions in a quantum circuit minimizing the total error. Our proposed analytical model helps to reduce the shots associated with reliable execution of quantum algorithms by about 58\% compared to current practice, in turn reducing the energy consumption by upto 62\%. Furthermore, our proposed optimal shot allocation technique across different partitions reduces total error by up to 73\% compared to conventional approaches.
The continuous growth of quantum computing and the increasingly complex quantum programs resulting from it lead to unprecedented obstacles in ensuring program correctness. Runtime assertions are, therefore, becoming a crucial tool in the development of quantum programs. They assist developers in the debugging process and help to test and verify the program. However, while assertions can be implemented in a straightforward manner on classical computers, physical limitations of quantum computers pose considerable challenges for the evaluation of quantum assertions. Access to the quantum state of a program is limited, execution time is expensive and noise can significantly distort measurement outcomes. To address these problems, this work proposes a framework that assists developers in the evaluation of runtime assertions on real quantum computers. It translates a variety of assertions into sets of measurements, reduces execution overhead where possible and evaluates the measurement results after the execution even in the presence of noise. This approach substantially aids developers in the debugging process, enabling efficient assertion-driven debugging even in large programs. The proposed framework is available as an open-source implementation at https://github.com/munich-quantum-toolkit/debugger
Recursive QAOA (RQAOA) solves combinatorial optimization problems by using shallow quantum circuits to estimate pairwise correlations and recursively eliminate variables until a classical solver can handle the residual instance. Each elimination step requires measurement shots, and the total shot cost grows with the number of recursive stages. On near-term quantum devices, increasing shot counts can translate directly into greater exposure to hardware-level noise sources such as readout errors and decoherence, making shot-efficient execution not merely a cost-reduction measure but a factor with direct implications for solution reliability. While shot reduction has been studied broadly across NISQ algorithms, step-wise measurement control inside the recursive loop of RQAOA has received little attention. We formulate this step-wise allocation as a sequential decision problem and propose two strategies for depth-1 RQAOA on weighted Max-Cut instances. A hand-crafted heuristic assigns shots based on local indicators of step difficulty, and a tabular Double Q-learning agent learns a residual policy that adjusts this baseline under a Lagrangian-constrained objective. Both methods are evaluated under a fixed-cap fairness protocol that equalizes the per-step budget across all strategies, and the elimination rule itself is kept unchanged so that the contribution of adaptive measurement control can be isolated. On a diverse set of weighted graph instances spanning a range of sizes and structures, the heuristic reduces total shots by approximately 23% relative to uniform allocation, and the RL policy achieves a 36% reduction with a lower effective shots per success ratio than both baselines. The improvement persists on problem sizes not seen during training, suggesting that reinforcement learning can discover efficient, instance-adaptive measurement strategies in recursive quantum optimization.