arXiv:2610.26413
Two-qubit cryo-CMOS control of a spin register in diamond
H. B. van Ommen, N. E. Fakkel, M. van Riggelen, J. Yun, L. A. Enthoven, M. A. B. ElBadry, F. Sebastiano, M. Babaie, T. H. Taminiau
Abstract
Utility-scale quantum technologies will not only require a well-performing quantum platform, but also classical control hardware that is scalable, efficient, and meets the design requirements set by the quantum system of interest. One approach is the application of silicon CMOS technology, a highly scalable and mature technology, to design application-specific integrated circuits (ASIC) that are optimized for the quantum system. In this work, we present two-qubit control of electron and nuclear spins in NV centres in diamond, using a cryogenic CMOS qubit controller integrated with a diamond quantum device in a cryostat. Using Gate Set Tomography (GST) we characterize the performance of the single-qubit gates on both electron- and carbon nuclear spins, and analyze the limiting noise processes. We use dynamical decoupling to engineer a two-qubit gate, and estimate $F_\text{2q,avg} = 95(2)\%$ for the electron-nuclear two-qubit gate fidelity. Our demonstration of cryo-CMOS-driven two-qubit gates is a key step towards highly-integrated quantum devices based on colour centres.
AI Summary
The paper investigates whether a cryogenic CMOS controller can provide universal control of an NV-centre electron–nuclear spin register while operating alongside the diamond device. A previously characterized ASIC is integrated with diamond at 6 K, using GHz and MHz signal generators connected to a shared drive coil. Initialization and readout remain controlled by room-temperature equipment. Single-qubit control is assessed using gate-set tomography (GST). Reported average fidelities exceed 99% for the electron spin, 99.4% for one $^{13}\mathrm{C}$ spin, and 96% for a second. Electron-spin dynamical decoupling preserves coherence for up to approximately 50 ms, with performance comparable to room-temperature control. An electron–nuclear entangling gate is implemented using an established resonant dynamical-decoupling scheme: the interpulse delay is calibrated to $1.3507\,\mu\mathrm{s}$ and 28 microwave pulses produce the target conditional rotation. Two-qubit tomography gives a readout-corrected Bell-state fidelity of $88.6(8)\%$. Fitting three correlators to a depolarizing-error model, assuming ideal surrounding gates, yields an estimated average two-qubit gate fidelity of $95(2)\%$, rather than an independent process benchmark. Limitations include substantial GST model violations even after restricting sequence lengths, attributed to non-Markovian noise, drift, and possible heating. RF driving causes electron-spin dephasing that prevents effective combined RF–decoupling gates. Fine timing currently requires tuning the external instruction-clock frequency, which is unsuitable for straightforward register scaling. Transient heating reduces readout contrast, and further integration requires optical-control interfaces, improved sequencing, lower dissipation, and better suppression of out-of-band RF emissions.
Error found: The reported 95(2)% average two-qubit gate fidelity is conditional on a depolarizing-noise model and ideal other gates, rather than established by process characterization. The paper's description of 95(2)% as a lower bound is unsupported because errors that preserve the tested Bell output can nevertheless greatly reduce average gate fidelity.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.