Laser amplification kicks off with just a few photons in the cavity, a regime where standard additive Langevin noise cannot capture the real fluctuations. To understand how this amplification begins, we map out a single-mode photon-carrier model that links macroscopic lasers directly into nanolasers. Stationary rate equations reveal that stimulated emission takes over across a tight pump window. In nanolasers, however, spontaneous processes coexist across a much broader range. Because steady-state averages miss the individual events that lead to the macroscopic photon number, we frame the stochastic dynamics around the actual discrete transitions, deriving a state-dependent diffusion approximation. The destruction of an excited carrier concurrent with the generation of a photon creates a negative photon-carrier cross-correlation. This unavoidably leads to a correlated, multiplicative Gaussian-noise framework. We track the resulting discrete dynamics with an established, event-based Laser Markov Chain (LMC) which stochastically samples pump, relaxation, emission, and cavity-loss events keeping all physical quantities as non-negative integers. Comparing its predictions to those of our multiplicative model proves that the latter reproduces excellently well the statistical behavior of photons and carrier, as long as a continuous diffusion description holds. Once the emission drops into the few-photon regime, however, the discrete model becomes indispensable. On the other hand, at large photon counts relative fluctuations shrink to a level where the state-dependence of the diffusion matrix can be ignored, to leading order, thus returning to the classic Langevin description of the system's stochastic dynamics.
AI Summary
The paper examines which stochastic description captures the onset of single-mode laser amplification as photon populations increase from a few photons to the large-population regime. It uses a photon–carrier rate model with spontaneous-emission coupling $\beta$, focusing on quantum-well-type devices.
Stationary solutions give the nominal threshold pump $R_{\mathrm{th}}=\Gamma_c/\beta$ and threshold photon population $\bar n_{\mathrm{th}}=\beta^{-1/2}$. Comparisons between $\beta=10^{-6}$ and $10^{-1}$ illustrate a sharper spontaneous-to-stimulated crossover in the former and broader coexistence in the latter. A master-equation expansion explains how state-dependent transition rates produce multiplicative diffusion, with negative photon–carrier cross-diffusion because emission creates a photon while removing a carrier. The implemented Gaussian model uses phenomenological population-proportional noise amplitudes; its diffusion strengths must satisfy $D_{nN}^{2}\leq D_nD_N$ for positive semidefiniteness.
An established event-based Laser Markov Chain supplies the discrete benchmark. Simulations cover $\beta=10^{-1},10^{-3},10^{-6}$, with a displayed comparison of mean populations and standard deviations at $\beta=10^{-1}$ reported to agree with the continuous model. Linearizing around a well-populated stationary state and freezing the diffusion matrix recovers additive Ornstein–Uhlenbeck noise.
The stated validity conditions require many events per coarse-graining interval and small relative population changes. Few-photon dynamics violate these conditions; Gaussian trajectories can become negative, and clipping or reflection changes their statistics. A large carrier reservoir alone does not justify photon diffusion. The model omits nonradiative relaxation, and its phenomenological noise coefficients remain unspecified until calibration or large-population matching.
Central claim may not hold: The tested multiplicative model has diffusion entries proportional to n², N², and nN, rather than the emission-, loss-, relaxation-, and pump-rate diffusion matrix implied by the stated discrete transitions.
The prescribed nonzero noise means add systematic population-growth terms absent from the transition-derived drift, without a compensating subtraction.
The paper assigns both Stratonovich and Itô interpretations to the same state-dependent stochastic equations without supplying the necessary drift conversion or a consistent simulation convention.
The displayed LMC carrier recurrence omits stimulated-emission depletion even though its photon recurrence includes stimulated-emission production, so the written benchmark does not reproduce the stated carrier dynamics.
The explicit numerical comparison establishes at most agreement of means and standard deviations in a restricted parameter setting, rather than the broadly claimed validation of a transition-derived diffusion model.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
Laser amplification kicks off with just a few photons in the cavity, a regime where standard additive Langevin noise cannot capture the real fluctuations. To understand how this amplification begins, we map out a single-mode photon-carrier model that links macroscopic lasers directly into nanolasers. Stationary rate equations reveal that stimulated emission takes over across a tight pump window. In nanolasers, however, spontaneous processes coexist across a much broader range. Because steady-state averages miss the individual events that lead to the macroscopic photon number, we frame the stochastic dynamics around the actual discrete transitions, deriving a state-dependent diffusion approximation. The destruction of an excited carrier concurrent with the generation of a photon creates a negative photon-carrier cross-correlation. This unavoidably leads to a correlated, multiplicative Gaussian-noise framework. We track the resulting discrete dynamics with an established, event-based Laser Markov Chain (LMC) which stochastically samples pump, relaxation, emission, and cavity-loss events keeping all physical quantities as non-negative integers. Comparing its predictions to those of our multiplicative model proves that the latter reproduces excellently well the statistical behavior of photons and carrier, as long as a continuous diffusion description holds. Once the emission drops into the few-photon regime, however, the discrete model becomes indispensable. On the other hand, at large photon counts relative fluctuations shrink to a level where the state-dependence of the diffusion matrix can be ignored, to leading order, thus returning to the classic Langevin description of the system's stochastic dynamics.
The paper examines which stochastic description captures the onset of single-mode laser amplification as photon populations increase from a few photons to the large-population regime. It uses a photon–carrier rate model with spontaneous-emission coupling β, focusing on quantum-well-type devices.
Stationary solutions give the nominal threshold pump Rth=Γc/β and threshold photon population nˉth=β−1/2. Comparisons between β=10−6 and 10−1 illustrate a sharper spontaneous-to-stimulated crossover in the former and broader coexistence in the latter. A master-equation expansion explains how state-dependent transition rates produce multiplicative diffusion, with negative photon–carrier cross-diffusion because emission creates a photon while removing a carrier. The implemented Gaussian model uses phenomenological population-proportional noise amplitudes; its diffusion strengths must satisfy DnN2≤DnDN for positive semidefiniteness.
An established event-based Laser Markov Chain supplies the discrete benchmark. Simulations cover β=10−1,10−3,10−6, with a displayed comparison of mean populations and standard deviations at β=10−1 reported to agree with the continuous model. Linearizing around a well-populated stationary state and freezing the diffusion matrix recovers additive Ornstein–Uhlenbeck noise.
The stated validity conditions require many events per coarse-graining interval and small relative population changes. Few-photon dynamics violate these conditions; Gaussian trajectories can become negative, and clipping or reflection changes their statistics. A large carrier reservoir alone does not justify photon diffusion. The model omits nonradiative relaxation, and its phenomenological noise coefficients remain unspecified until calibration or large-population matching.
The random nature of spontaneous emission leads to unavoidable fluctuations in a laser's output. This is often included through random Langevin forces in laser rate equations, but this approach falls short for nanolasers. In this paper, we show that the laser quantum noise can be quantitatively computed for a very broad class of lasers by starting from simple and intuitive rate equations and merely assuming that the number of photons and excited electrons only takes discrete values. While the approach has seen previous success, we here derive it rigorously from an open quantum system master equation, whereas it was previously introduced only on phenomenological grounds. We further show that in the many-photon limit, the model simplifies to Langevin equations. We perform an extensive comparison of different approaches for computing quantum noise in lasers, identifying the best approach for different system sizes, ranging from nanolasers to macroscopic lasers, and different levels of excitation, i.e., cavity photon number. In particular, we show that below the laser threshold, stochastic fluctuations in the numerical solution to the Langevin equations can drive populations to unphysical negative values, requiring the introduction of population bounds, which in turn skew the noise statistics, leading to inaccuracies. The Laser Markov Chain model, on the other hand, is accurate for all pump values and laser sizes when collective emitter effects are excluded.
It is shown that the quantum intensity noise of a single-emitter nanolaser can be accurately computed by adopting a stochastic interpretation of the standard rate equation model. The only assumption made is that the emitter excitation and photon number are stochastic variables with integer values. This extends the validity of rate equations beyond the mean-field limit and avoids using the standard Langevin approach, which is shown to fail for few emitters. The model is validated by comparison to full quantum simulations of the relative intensity noise and second-order intensity correlation function, g^{(2)}(0). Surprisingly, even when the full quantum model displays vacuum Rabi oscillations, which are not accounted for by rate equations, the intensity quantum noise is correctly predicted by the stochastic approach. Adopting a simple discretization of the emitter and photon populations, thus, goes a long way in describing quantum noise in lasers. Besides providing a versatile and easy-to-use tool for modeling emerging nanolasers, these results provide insight into the fundamental nature of quantum noise in lasers.
Using two equivalent methods, the Heisenberg-Langevin and the master equation, we investigate the properties of a single-emitter nanolaser: an incoherently pumped single two-level system interacting with a single cavity mode of finite finesse. We are interested in a stationary generation regime when the mean number of photons inside the laser cavity is much larger than unity. In this case we linearize the Heisenberg-Langevin equations around the stationary classical solution and obtain analytical results for the linewidth, the quadrature fluctuation spectra, and the intracavity Mandel Q parameter. As the second method we use the master equation for the density operator of the laser field. Using the coherent-state representation of the density matrix we obtain the stationary solution for the Glauber P function of the laser mode and investigate the quantum statistics of the laser field and its threshold behavior. We compare the results of both methods with numerical simulations and find very good agreement. In the end we use our theoretical results for analyzing experiment with single-ion nanolasers.
We detail the derivation of nanolaser models that include coherent and incoherent variables and predict the existence of a laser threshold, irrespective of cavity size and emitter number, for both single- and multielectron systems. The growth in photon number in the lasing mode is driven by an increase in correlation between absorption and emission processes, leading to the onset of self-sustained stimulated emission (laser threshold), followed in turn by a correlation decrease and ending with the dominance of coherent emission. The first-order coherence g(1) steadily increases, as the pump grows towards the laser threshold value, and reaches unity at or beyond threshold. The transition toward coherent emission becomes increasingly sharp as the numbers of emitters and coupled electromagnetic cavity modes increase, continuously connecting, in the thermodynamic limit, the physics of nano- and macroscopic lasers at threshold. Our predictions are in remarkable agreement with experiments whose first-order coherence measurements have so far been explained only phenomenologically. A consistent evaluation of different threshold indicators provides a tool for a correct interpretation of experimental measurements at the onset of laser action.
The laser has evolved from table size apparatuses to truly nano sized devices, in much the same way that computer chips have been continuously minimized. The few-emitter nanolaser represents an extreme in terms of size. The emitters can be either atoms or quantum dots, and they are coupled to a high-Q optical cavity. This system has previously been studied for the one and two emitters case, see e.g. [1, 2]. The emitters and cavity are modelled as two-level systems and a harmonic oscillator, respectively. The coupled system is modelled using the Jaynes-Cummings Hamiltonian and the two-level systems are pumped incoherently by a rate P. Solutions are found using the corresponding master equation. However, with cavity populations exceeding 100 and several emitters, the dimension of the Hilbert space of the system becomes too large to handle efficiently on a conventional computer. E.g. for four emitters and 100 photon states the density matrix has more than 2.5 × 106 elements. We have been able to simplify the problem significantly by adiabatically eliminating the photon-assisted polarizations and the correlations between emitters and cavity [3]. This results in a set of rate equations for the population of the cavity, na, and the occupation of the emitters. Fig. 1a) shows na for up to 4 emitters coupled to a cavity, as a function of the pumping rate P. The figure also shows results from a full master equation solution, and the correspondence is very good for large values of P. In Fig. 1b) the second order correlation functions g(2)(0) are shown, as obtained using the full model. The second order correlation functions become 1 for sufficiently large values of P signifying the onset of lasing. However, for larger values of P the laser quenches and the emission becomes chaotic (g(2)(0) = 2). This quenching effect is well-known in two-level models [3], but might not be realistic for semiconductor quantum dots. A proposed application for these nanolasers is in on-chip optical interconnects. In this application the modulation bandwidth is important. We have calculated the modulation bandwidth using a small-signal analysis of the rate equations, which has the advantage compared the full model of yielding a semianalytical result. The results are shown in Fig. 1c). The nanolaser has a high bandwidth, which is mostly limited by the cavity lifetime (/ 1/), but shows a prominent drop during the lasing regime. The modulation bandwidth again becomes limited by as the output becomes chaotic.
In nanolasers, a few to a few hundred quantum emitters share a single mode of light. Coupled identically to the mode, the emitters do not radiate independently but form collective bright and dark states, producing superradiant bursts and strongly bunched photon statistics below the laser threshold. We investigate to what extent this behavior can be understood as random jumps between collective Dicke states. From the laser master equation, we derive a hierarchy of models defined by the polarization order, i.e., the number of photons involved in the coherence between the emitters and the light, and include the coherence to various orders. With all of the coherences eliminated, we obtain a Dicke Markov chain, a stochastic jump process over the photon number and the Dicke states, in which collective effects enter only through enhanced or suppressed transition rates. It predicts superthermal bunching and a strong even--odd dependence on the emitter number. It recovers about 80\% of the bunching in the most coherent regime, where conventional rate equations predict no superthermal bunching. Keeping the first polarization order, i.e., the optical polarization, and eliminating the second order, i.e., the two-photon coherences, yields a population-polarization model, which recovers the bunching of the full master equation almost perfectly. This hierarchy of polarization orders is an alternative to the cumulant expansion and, unlike it, recovers the master equation at the highest order. As a numerically exact reference, a symmetry-reduced master equation extends the simulation range all the way to 34 (24) emitters below (above) threshold. The Dicke Markov chain can be solved directly for hundreds of emitters and sampled for thousands of emitters, further extending the range of numerical methods. We compare the numerical performance of the methods in detail to guide the choice of technique.