arXiv:2610.22614
Trapping of nanofabricated SiO$_2$ high-aspect-ratio discs in an optical lattice
Shelby Klomp, Shafaq Gulzar Elahi, Scott Grudichak, Chethn Galla, Zhiyuan Wang, Mark Nguyen, George Winstone, Katarina Boskovic Guy, Emma Derrick, Maddox Wroblewski, Jacob Sprague, Andrew Laeuger, Jackson Larsen, Nancy Aggarwal, Shane L. Larson, Andrew A. Geraci
Abstract
We describe the nanofabrication and loading of lithographically patterned, high aspect ratio $10$ $μ$m diameter silicon dioxide discs with thickness of $400$ nm into an optical standing wave trap in vacuum. We obtain motional spectra of the center of mass motion of the discs using a combination of interferometric and imaging methods. The method is capable of high-efficiency loading and optical trapping using small numbers of objects, of the order of a few particles, with customized geometries and sizes compatible with wafer scale nanofabrication methods. Disc-like particles in optical traps have been identified as promising candidates for detectors of high frequency gravitational waves or as sensitive accelerometers.
AI Summary
The paper investigates whether small numbers of lithographically fabricated, high-aspect-ratio dielectric discs can be loaded into optical traps for levitated sensing. It demonstrates trapping of silica discs nominally $10\,\mu\mathrm{m}$ in diameter and $400\,\mathrm{nm}$ thick, using a fabrication process producing over $10^6$ discs per wafer. A piezo-driven micropipette containing 5–10 discs delivers particles into a counter-propagating, 1560-nm standing-wave trap at 6 mbar. Repeated single-disc trapping is reported, including capture of two discs on successive attempts from one loaded pipette; a statistical loading probability is not provided. Interferometric and quadrant-photodiode measurements characterize motion at approximately 0.25–0.3 mbar with 50–60 mW per trapping beam. Boundary-element electromagnetic simulations predict translational and librational frequencies for comparison with measured spectra. Preliminary directional feedback cooling supports assignment of transverse motion near 1.6 kHz and axial motion near 20 kHz for one particle; another has an axial frequency near 35 kHz. Axial linewidths show approximately the pressure dependence expected from gas damping. A previously defined thermal-noise gravitational-wave sensing figure of merit reaches $340\,\mathrm{Hz}^2\mathrm{kg}/\mathrm{m}$, about three times the cited previous value; gravitational-wave sensitivity itself is not measured. Additional spectral peaks remain unassigned. Size variation, chipping, and adhered particulates may explain discrepancies with simulations, while near-degenerate modes complicate damping analysis. Feedback cooling is not fully characterized, and ultrahigh-vacuum trapping, cavity operation, and recoil-limited sensing performance remain future work.
Error found: The description of loading as “high-efficiency” is not quantitatively substantiated because the paper reports successful trapping from 5–10-disc inventories without reporting trial counts, launch counts, or particle losses.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
- Comments
- 8 Pages, 4 figures; Comments are welcome