arXiv:2610.19599 · Physical Review Applied
Cryogenic Multiplexing Control Chip for Superconducting Quantum Processor
Rutian Huang, Xiao Geng, Xinyu Wu, Genting Dai, Liangliang Yang, Jianshe Liu, Wei Chen
Abstract
This paper proposes a scheme and design of cryogenic multiplexing control chip (MCC) which enables one microwave cable to control many superconducting qubits. Designed based on adjustable inductor, MCC is a non-reciprocal device which generates microwave signals between 4 and 8 GHz and constructs XY control circuit to operate qubits. The effects of filters, isolators, power splitters, qubits and load impedance on MCC are analyzed in the frequency-domain simulation. And in time-domain simulation, the response time, Gaussian pulses, single-sideband, amplitude and frequency compensation of MCC are examined. The MCC can be integrated with the superconducting qubits on the same package at 20 mK temperature stage, and output specific microwave pulses used to drive the superconducting qubits without crosstalks. The MCC can greatly reduce the number of microwave control lines and is beneficial to the development of large-scale superconducting quantum processor.
AI Summary
The paper addresses microwave-control wiring for superconducting processors by proposing a frequency-multiplexing control chip intended for integration with qubits at the $20\,\mathrm{mK}$ stage. A shared microwave input carries multiple control tones, which are distributed through power splitters, bandpass filters, and tunable nonreciprocal isolators. Reversing an isolator’s direction blocks the corresponding channel. The study uses Advanced Design System frequency- and time-domain circuit simulations of a four-channel design targeting $4$–$8\,\mathrm{GHz}$. The tunable isolators are represented by bandpass filters combined with ideal isolator elements, with specified isolation and insertion-loss parameters. Comparisons among Bessel, Butterworth, and Chebyshev filters lead to selecting Chebyshev filters for subsequent simulations. With isolator isolation set to $20\,\mathrm{dB}$, simulated forward transmission is approximately $-6\,\mathrm{dB}$, reverse transmission is below roughly $-26\,\mathrm{dB}$, and inter-output-port transmission falls below $-300\,\mathrm{dB}$ in the circuit model. Four-way power splitting contributes approximately $6\,\mathrm{dB}$ attenuation. A continuous-wave response time, defined by the first output maximum, decreases from approximately $10$ to $6\,\mathrm{ns}$ when splitters are included. Time-domain simulations demonstrate IQ-generated single-sideband signals and multiplexing/demultiplexing of continuous waves and Gaussian pulses. Reported nonidealities include channel-dependent amplitude attenuation, Gaussian-envelope asymmetry after demultiplexing, and pulse-spectrum peak shifts of approximately $5$–$16\,\mathrm{MHz}$. Amplitude and source-frequency adjustments are proposed as compensation. Performance also depends on load matching. The results establish simulated circuit behavior; fabrication, cryogenic operation, and qubit-gate performance are not experimentally demonstrated.
Central claim may not hold: The claimed 20 mK, crosstalk-free qubit-control capability is supported only conditionally by circuit simulations with prescribed isolator behavior, without validating the SQUID implementation, thermal feasibility, or qubit-control errors. The abstract attributes microwave generation to the MCC, although the described architecture generates signals upstream and uses the MCC for demultiplexing and filtering. The printed dB conversion for the amplitude scattering matrix is incorrect: it should be 20 log10|mathcal S_ij|. The specified 10 ns sampling interval aliases every listed continuous-wave intermediate frequency to DC, making the stated sampled IQ inputs inconsistent with the claimed single-sideband signals. The printed load-impedance polynomial yields −1,937,500.314 dB at 50 ohms, contradicting the stated approximately −6 dB maximum.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
- Journal reference
- Phys. Rev. Applied 18, 064046. Published 15 December, 2022
- DOI
- 10.1103/PhysRevApplied.18.064046