Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.18477

Experimental Realization of a C-Shunt Flux-Qubit Coupler for Controlled-Z Gates between Transmons

Weiping Yuan, Silu Zhao, Li Li, Chenglin Deng, Zhenghe Liu, Yu Liu, Tianming Li, Mingchuan Wang, Bingjie Chen, Guihan Liang, Jiacheng Song, Jinming Guo, Shuaili Wang, Mingxuan Zhou, Xiaohui Song, Kai Xu, Heng Fan, Zhongcheng Xiang, Dongning Zheng

quant-phSubmitted Oct 13, 2026• Announced Oct 14, 2026• 0 citations
arXivHTMLPDF

Abstract

Fast entangling gates and low-interaction idling require distinct operating conditions in superconducting quantum processors. We experimentally realize a transmon-C-shunt-transmon (TCT) device in which a flux-tunable, three-junction capacitively shunted flux-qubit coupler connects two transmon data qubits. The C-shunt coupler provides a flux-tunable, positively anharmonic spectrum for tailoring the interactions between the data qubits. Conditional Ramsey and swap measurements identify an idle region with near-zero residual ZZ interaction strength and suppressed transverse exchange. At this bias, simultaneous single-qubit interleaved randomized benchmarking yields X-gate fldelities above 99.7%, consistent with individual operation. A 45 ns nonadiabatic controlled-Z (CZ) gate achieves an interleaved randomized benchmarking fldelity estimate of 99.23(15)%. Numerical simulations identify coupler energy relaxation as an important limitation on CZ-gate fldelity and indicate that extending the coupler lifetime can improve gate performance. These results demonstrate the experimental feasibility of C-shunt flux-qubit couplers for combining low-interaction idling with fast entangling operations between transmon qubits.

AI Summary

The paper asks whether a positively anharmonic C-shunt flux-qubit coupler can combine low-interaction idling with fast entangling gates between transmons. It experimentally realizes a transmon–C-shunt–transmon circuit using a flux-tunable three-junction coupler without a superinductor. Spectroscopy fitted to a circuit model gives qubit–coupler couplings of approximately $101$ and $105\,\mathrm{MHz}$ and a model-derived coupler anharmonicity of $+703\,\mathrm{MHz}$. Conditional Ramsey measurements show that residual $\zeta_{ZZ}/2\pi$ crosses zero while tuning from approximately $-5.2$ to $10.5\,\mathrm{MHz}$. Swap measurements locate suppressed transverse exchange near the same idle bias. Simultaneous single-qubit interleaved randomized benchmarking gives $X$-gate fidelities of $99.711(32)\%$ and $99.826(56)\%$, statistically consistent with individual operation. A calibrated $45\,\mathrm{ns}$ nonadiabatic flux pulse implements a CZ gate with an interleaved-RB fidelity estimate of $99.23(15)\%$, under standard IRB assumptions. Relaxation-only Lindblad simulations identify the coupler’s approximately $1.1\,\mu\mathrm{s}$ lifetime as a limitation. With measured data-qubit lifetimes and a fixed optimized pulse, increasing coupler lifetime to $5\,\mu\mathrm{s}$ raises simulated fidelity from approximately $99.68\%$ to $99.80\%$. The simulation does not reproduce the full measured error; dephasing, leakage, flux-pulse distortion, and residual phase errors remain improvement targets, and gate-bias relaxation measurements are proposed. Numerical design studies place a coupler two-excitation collision outside a selected control band and find localized spectator-ZZ changes in a six-qubit chain. These scalability results are simulations with other array links omitted, not demonstrations of a larger processor.

Little sign of AI-generated textIncrementalMissing comparison

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Comments
14 pages, 6 figures

Related papers

Capacitively shunted double-transmon coupler realizing bias-free idling and a high-fidelity CZ gate

Rui Li, Kentaro Kubo, Yinghao Ho +4 more

A high-fidelity controlled- Z (CZ) gate utilizing a double-transmon coupler (DTC) has recently been demonstrated as a building block for superconducting quantum processors. Like many other kinds of tunable couplers, however, the DTC requires a finite dc current for flux biasing the coupler at the idling point to turn off the coupling, necessitating extra care for wiring and heat-load management. To address this issue, we theoretically propose and experimentally realize a coupling scheme by introducing a shunt capacitance between the two transmons of the DTC at zero-flux bias, which demonstrates high-fidelity CZ-gate performance comparable to the previous DTC. Through a comprehensive error budget analysis using multiple randomized benchmarking methods, we also identify that the current fidelity is limited by the decoherence through the coupler. Moreover, we experimentally demonstrate the wide operational flux range of the capacitively shunted DTC, which solves the challenging issue of remnant flux existing even with careful magnetic shielding.

arXiv:2503.03053•Physical Review Applied•May 20, 2025•5 citations

Fast CZ gate in hybrid fluxonium-transmon systems with tunable couplers

Peng Xu, Yunlong Wang, Yuechen Mu +4 more

Hybrid superconducting architectures combining different types of qubits offer a promising platform for exploiting their complementary advantages, yet high-fidelity entangling gates remain challenging because of strong nonlinearities and residual qubit-qubit interactions. Here, we propose a high-fidelity controlled-Z (CZ) gate for a hybrid circuit comprising a fluxonium qubit, a fixed-frequency transmon qubit, and a flux-tunable transmon coupler. By modulating only the external magnetic flux applied to the coupler, the qubit-qubit interaction is dynamically engineered for conditional-phase accumulation while the residual interaction is suppressed at idle, mitigating spectator-induced errors. We employ a low-dimensional Fourier-cosine pulse parameterization and a physically motivated cost function to independently suppress conditional-phase errors and leakage from the computational subspace. Numerical simulations demonstrate that a microwave-free CZ gate can be realized within $25 \mathrm{ns}$, with an average gate fidelity exceeding $99.99\%$ and leakage below $10^{-5}$. Using experimentally relevant superconducting-qubit parameters and accounting for decoherence, the proposed scheme maintains a CZ-gate fidelity of approximately $99.9\%$. We further extend the analysis to larger coupled architectures and find that the CZ-gate infidelity remains below $10^{-4}$ in the presence of spectator qubits. These results establish single-parameter flux control as a simple and robust approach for realizing high-fidelity entangling gates in heterogeneous superconducting quantum architectures.

quant-pharXiv:2609.14197•Sep 15, 2026•0 citations

ZZ-Free Two-Transmon CZ Gate Mediated by a Fluxonium Coupler

Junyoung An, Helin Zhang, Qi Ding +19 more

Eliminating residual ZZ interactions in a two-qubit system is essential for reducing coherent errors during quantum operations. In a superconducting circuit platform, coupling two transmon qubits via a transmon coupler has been shown to effectively suppress residual ZZ interactions. However, in such systems, perfect cancellation usually requires the qubit-qubit detuning to be smaller than the individual qubit anharmonicities, which exacerbates frequency crowding and microwave crosstalk. To address this limitation, we introduce TFT (Transmon-Fluxonium-Transmon) architecture, wherein two transmon qubits are coupled via a fluxonium qubit. The coupling mediated by the fluxonium eliminates residual ZZ interactions even for transmons detuned larger than their anharmonicities. We experimentally identified zero-ZZ interaction points at qubit-qubit detunings of 409 MHz and 616 MHz from two distinct TFT devices. We then implemented an adiabatic, coupler-flux-biased controlled-Z gate on both devices, achieving CZ gate fidelities of 99.64(6)% and 99.68(8)%.

quant-pharXiv:2511.02115•Physical Review Applied•Nov 5, 2025•10 citations

Anharmonic tunable coupler with inductively shunted transmon

Yu Feng Zhang, Lian-Lian Zhang, Shuang Xu

Abstract Inductively shunted transmon qubits(IST) have emerged as one of the most promising candidates for superconducting quantum computing, exhibiting remarkable resilience to both charge and flux noise as a qubit. In this work, we investigate, analytically and numerically, the potential of the IST as a coupler. Compared to the conventional transmon couplers, significant advantages due to the addition of an inductive shunt is revealed, and the unique flux-tunability makes it an ideal candidate for implementing coupling between two transmons. Moreover, a novel coupling circuit is investigated through numerical simulations, demonstrates high-contrast switching of qubit–qubit interactions under the control of an external flux, realizing a two-qubit controlled-Z (CZ) gate with an average fidelity above 99.99%.

Physica Scripta•Mar 13, 2025•0 citations

Parametrically Driven iSWAP Gate Using a Capacitively Shunted Double-Transmon Coupler at the Zero-Flux Sweet Spot

Shinichi Inoue, Rui Li, Kentaro Kubo +3 more

A double-transmon coupler (DTC) enables a fast, high-fidelity CZ gate between two highly detuned, fixed-frequency transmon qubits. Moreover, a recently proposed capacitively shunted DTC (CSDTC) realizes a small residual ZZ interaction over a wide flux-bias range around zero flux, eliminating the necessity of static flux biasing while maintaining high CZ-gate fidelity. However, CZ gates with the DTC and CSDTC require baseband flux pulses with large amplitudes, which are vulnerable to pulse distortion and decoherence due to large qubit-coupler hybridization. To address these issues, we experimentally demonstrate a parametrically driven iSWAP gate operated at zero flux bias between highly detuned, fixed-frequency transmon qubits coupled through a CSDTC. Using a simple flux-drive waveform without predistortion, we realize an average gate fidelity of 99.92(2)% at a total gate time of 112 ns. The observed high-fidelity performance is consistent with small qubit-coupler hybridization and small effective ZZ interaction during the gate. Our numerical simulations reproduce the experimentally observed iSWAP interaction rate and effective ZZ interaction, demonstrating the applicability of the theoretical model not only to spectral information but also to time-domain dynamics such as gate operations. These results boost further progress in the research of superconducting quantum computers.

quant-pharXiv:2604.27679•PRX Quantum•May 1, 2026•4 citations

Unlocking a fast adiabatic CZ gate and exact residual $ZZ$ cancellation between fixed-frequency transmons using a floating tunable coupler

Angela Q. Chen, Xian Wu, Sarah Strong +1 more

Tunable couplers in superconducting qubit architectures enable strong qubit-qubit interactions for two-qubit gates while suppressing unwanted coupling during single-qubit operations. However, achieving low error rates for fast two-qubit gates remains challenging, as suppressing leakage and non-adiabatic errors typically requires specialized qubit, coupler, or pulse designs, often at the expense of an idling $ZZ=0$ condition. In this work, we demonstrate that a symmetric floating tunable coupler provides a natural platform for fast, high-fidelity adiabatic controlled-Z (CZ) gates. Its favorable energy-level structure eliminates the conventional trade-off between rapid conditional-phase accumulation and adiabatic evolution while preserving exact cancellation of residual $ZZ$ interaction at idling. This architecture exhibits intrinsic robustness to non-adiabatic transitions, even under simple flux modulation waveforms. To push performance at short gate durations, where maintaining adiabaticity becomes more challenging despite the favorable level structure, we introduce pulse-shaping techniques based on the instantaneous adiabatic factor that further suppress non-adiabatic errors. We experimentally realize a 24 ns adiabatic CZ gate with fidelity exceeding 99.9% and stable operation over several hours.

quant-pharXiv:2604.05048•Apr 8, 2026•6 citations
Fast entangling gates and low-interaction idling require distinct operating conditions in superconducting quantum processors. We experimentally realize a transmon-C-shunt-transmon (TCT) device in which a flux-tunable, three-junction capacitively shunted flux-qubit coupler connects two transmon data qubits. The C-shunt coupler provides a flux-tunable, positively anharmonic spectrum for tailoring the interactions between the data qubits. Conditional Ramsey and swap measurements identify an idle region with near-zero residual ZZ interaction strength and suppressed transverse exchange. At this bias, simultaneous single-qubit interleaved randomized benchmarking yields X-gate fldelities above 99.7%, consistent with individual operation. A 45 ns nonadiabatic controlled-Z (CZ) gate achieves an interleaved randomized benchmarking fldelity estimate of 99.23(15)%. Numerical simulations identify coupler energy relaxation as an important limitation on CZ-gate fldelity and indicate that extending the coupler lifetime can improve gate performance. These results demonstrate the experimental feasibility of C-shunt flux-qubit couplers for combining low-interaction idling with fast entangling operations between transmon qubits.
The paper asks whether a positively anharmonic C-shunt flux-qubit coupler can combine low-interaction idling with fast entangling gates between transmons. It experimentally realizes a transmon–C-shunt–transmon circuit using a flux-tunable three-junction coupler without a superinductor. Spectroscopy fitted to a circuit model gives qubit–coupler couplings of approximately 101101101 and 105 MHz105\,\mathrm{MHz}105MHz and a model-derived coupler anharmonicity of +703 MHz+703\,\mathrm{MHz}+703MHz.
Conditional Ramsey measurements show that residual ζZZ/2π\zeta_{ZZ}/2\piζZZ​/2π crosses zero while tuning from approximately −5.2-5.2−5.2 to 10.5 MHz10.5\,\mathrm{MHz}10.5MHz. Swap measurements locate suppressed transverse exchange near the same idle bias. Simultaneous single-qubit interleaved randomized benchmarking gives XXX-gate fidelities of 99.711(32)%99.711(32)\%99.711(32)% and 99.826(56)%99.826(56)\%99.826(56)%, statistically consistent with individual operation. A calibrated 45 ns45\,\mathrm{ns}45ns nonadiabatic flux pulse implements a CZ gate with an interleaved-RB fidelity estimate of 99.23(15)%99.23(15)\%99.23(15)%, under standard IRB assumptions.
Relaxation-only Lindblad simulations identify the coupler’s approximately 1.1 μs1.1\,\mu\mathrm{s}1.1μs lifetime as a limitation. With measured data-qubit lifetimes and a fixed optimized pulse, increasing coupler lifetime to 5 μs5\,\mu\mathrm{s}5μs raises simulated fidelity from approximately 99.68%99.68\%99.68% to 99.80%99.80\%99.80%. The simulation does not reproduce the full measured error; dephasing, leakage, flux-pulse distortion, and residual phase errors remain improvement targets, and gate-bias relaxation measurements are proposed.
Numerical design studies place a coupler two-excitation collision outside a selected control band and find localized spectator-ZZ changes in a six-qubit chain. These scalability results are simulations with other array links omitted, not demonstrations of a larger processor.
A high-fidelity controlled- Z (CZ) gate utilizing a double-transmon coupler (DTC) has recently been demonstrated as a building block for superconducting quantum processors. Like many other kinds of tunable couplers, however, the DTC requires a finite dc current for flux biasing the coupler at the idling point to turn off the coupling, necessitating extra care for wiring and heat-load management. To address this issue, we theoretically propose and experimentally realize a coupling scheme by introducing a shunt capacitance between the two transmons of the DTC at zero-flux bias, which demonstrates high-fidelity CZ-gate performance comparable to the previous DTC. Through a comprehensive error budget analysis using multiple randomized benchmarking methods, we also identify that the current fidelity is limited by the decoherence through the coupler. Moreover, we experimentally demonstrate the wide operational flux range of the capacitively shunted DTC, which solves the challenging issue of remnant flux existing even with careful magnetic shielding.
Hybrid superconducting architectures combining different types of qubits offer a promising platform for exploiting their complementary advantages, yet high-fidelity entangling gates remain challenging because of strong nonlinearities and residual qubit-qubit interactions. Here, we propose a high-fidelity controlled-Z (CZ) gate for a hybrid circuit comprising a fluxonium qubit, a fixed-frequency transmon qubit, and a flux-tunable transmon coupler. By modulating only the external magnetic flux applied to the coupler, the qubit-qubit interaction is dynamically engineered for conditional-phase accumulation while the residual interaction is suppressed at idle, mitigating spectator-induced errors. We employ a low-dimensional Fourier-cosine pulse parameterization and a physically motivated cost function to independently suppress conditional-phase errors and leakage from the computational subspace. Numerical simulations demonstrate that a microwave-free CZ gate can be realized within 25ns25 \mathrm{ns}25ns, with an average gate fidelity exceeding 99.99%99.99\%99.99% and leakage below 10−510^{-5}10−5. Using experimentally relevant superconducting-qubit parameters and accounting for decoherence, the proposed scheme maintains a CZ-gate fidelity of approximately 99.9%99.9\%99.9%. We further extend the analysis to larger coupled architectures and find that the CZ-gate infidelity remains below 10−410^{-4}10−4 in the presence of spectator qubits. These results establish single-parameter flux control as a simple and robust approach for realizing high-fidelity entangling gates in heterogeneous superconducting quantum architectures.
Eliminating residual ZZ interactions in a two-qubit system is essential for reducing coherent errors during quantum operations. In a superconducting circuit platform, coupling two transmon qubits via a transmon coupler has been shown to effectively suppress residual ZZ interactions. However, in such systems, perfect cancellation usually requires the qubit-qubit detuning to be smaller than the individual qubit anharmonicities, which exacerbates frequency crowding and microwave crosstalk. To address this limitation, we introduce TFT (Transmon-Fluxonium-Transmon) architecture, wherein two transmon qubits are coupled via a fluxonium qubit. The coupling mediated by the fluxonium eliminates residual ZZ interactions even for transmons detuned larger than their anharmonicities. We experimentally identified zero-ZZ interaction points at qubit-qubit detunings of 409 MHz and 616 MHz from two distinct TFT devices. We then implemented an adiabatic, coupler-flux-biased controlled-Z gate on both devices, achieving CZ gate fidelities of 99.64(6)% and 99.68(8)%.
Abstract Inductively shunted transmon qubits(IST) have emerged as one of the most promising candidates for superconducting quantum computing, exhibiting remarkable resilience to both charge and flux noise as a qubit. In this work, we investigate, analytically and numerically, the potential of the IST as a coupler. Compared to the conventional transmon couplers, significant advantages due to the addition of an inductive shunt is revealed, and the unique flux-tunability makes it an ideal candidate for implementing coupling between two transmons. Moreover, a novel coupling circuit is investigated through numerical simulations, demonstrates high-contrast switching of qubit–qubit interactions under the control of an external flux, realizing a two-qubit controlled-Z (CZ) gate with an average fidelity above 99.99%.
A double-transmon coupler (DTC) enables a fast, high-fidelity CZ gate between two highly detuned, fixed-frequency transmon qubits. Moreover, a recently proposed capacitively shunted DTC (CSDTC) realizes a small residual ZZ interaction over a wide flux-bias range around zero flux, eliminating the necessity of static flux biasing while maintaining high CZ-gate fidelity. However, CZ gates with the DTC and CSDTC require baseband flux pulses with large amplitudes, which are vulnerable to pulse distortion and decoherence due to large qubit-coupler hybridization. To address these issues, we experimentally demonstrate a parametrically driven iSWAP gate operated at zero flux bias between highly detuned, fixed-frequency transmon qubits coupled through a CSDTC. Using a simple flux-drive waveform without predistortion, we realize an average gate fidelity of 99.92(2)% at a total gate time of 112 ns. The observed high-fidelity performance is consistent with small qubit-coupler hybridization and small effective ZZ interaction during the gate. Our numerical simulations reproduce the experimentally observed iSWAP interaction rate and effective ZZ interaction, demonstrating the applicability of the theoretical model not only to spectral information but also to time-domain dynamics such as gate operations. These results boost further progress in the research of superconducting quantum computers.
Unlocking a fast adiabatic CZ gate and exact residual ZZZZZZ cancellation between fixed-frequency transmons using a floating tunable coupler
Tunable couplers in superconducting qubit architectures enable strong qubit-qubit interactions for two-qubit gates while suppressing unwanted coupling during single-qubit operations. However, achieving low error rates for fast two-qubit gates remains challenging, as suppressing leakage and non-adiabatic errors typically requires specialized qubit, coupler, or pulse designs, often at the expense of an idling ZZ=0ZZ=0ZZ=0 condition. In this work, we demonstrate that a symmetric floating tunable coupler provides a natural platform for fast, high-fidelity adiabatic controlled-Z (CZ) gates. Its favorable energy-level structure eliminates the conventional trade-off between rapid conditional-phase accumulation and adiabatic evolution while preserving exact cancellation of residual ZZZZZZ interaction at idling. This architecture exhibits intrinsic robustness to non-adiabatic transitions, even under simple flux modulation waveforms. To push performance at short gate durations, where maintaining adiabaticity becomes more challenging despite the favorable level structure, we introduce pulse-shaping techniques based on the instantaneous adiabatic factor that further suppress non-adiabatic errors. We experimentally realize a 24 ns adiabatic CZ gate with fidelity exceeding 99.9% and stable operation over several hours.