arXiv:2610.16062
Multipolar Nanophotonics with Quantum Computers
Alex Krasnok
Abstract
Small particles respond to light through electric and magnetic patterns called multipoles. Their interference determines the direction of scattered light and affects the decay of nearby emitters. Larger nanoantenna arrays, metasurfaces, and other nanophotonic systems demand increasingly costly simulations to meet strict performance and reliability requirements. We show how to represent these responses with quantum bits (qubits) and use quantum circuits to calculate scattering and the Purcell effect, the change in an emitter's decay rate caused by its surroundings. The circuits can encode known multipoles or estimate unknown ones from Maxwell's equations at the particle surface. We test the method against classical theory using an ideal quantum simulator and real IBM and IonQ quantum computers. For a silicon nanoparticle of radius 78 nm illuminated at 679 nm, IonQ gives a forward directivity of 2.984, close to the ideal dipolar value 3, quantifying the concentration of scattered light in the forward direction. For an emitter 10 nm from a gold nanoparticle and emitting at 510 nm, IBM measurements yield a calculated total decay rate 20.48 times its vacuum value versus 20.47 from theory, with correction for errors in reading the qubit states. We also establish how the number of multipoles and the required accuracy set the demands on qubits and measurements. These results motivate quantum-assisted design studies of directional radiation and emitter decay in nanophotonic systems.
AI Summary
The paper asks how multipolar electromagnetic responses can be encoded and recovered with quantum circuits to calculate directional scattering and emitter decay rates. It amplitude-encodes electric and magnetic multipoles, constructs detector projections, and restores the physical norm and source-referenced phase needed for absolute observables. Known Mie coefficients test state preparation; unknown coefficients are estimated using one-qubit variational linear solvers for independent $2\times2$ Maxwell boundary systems, followed by classical optical reconstruction. Benchmarks use silicon and gold spheres, ideal simulation, and IBM and IonQ hardware. Exact-probability simulation solves 20 boundary systems with maximum coefficient error $1.4\times10^{-8}$. For silicon near the Huygens condition, IonQ boundary recovery gives forward directivity $2.984$ versus approximately $3$, but underestimates total scattering by $55\%$ and gives backward probability $0.00529$ versus $2.43\times10^{-4}$. For an emitter 10 nm from gold at 510 nm, readout-calibrated IBM measurements give total Purcell factor $20.48$ with conditional 95% interval $[19.94,21.11]$, versus $20.47$ classically; raw IBM and IonQ estimates are approximately $16.0$ and $17.4$. The paper derives observable-dependent accuracy requirements and measurement costs, emphasizing the sensitivity of interference minima and near-field observables. Hardware intervals condition on measured optimizer angles and exclude optimization variability, drift, and systematic gate errors. Demonstrations contain no coupled-multipole solve; matrix construction and reconstruction remain classical, and Mie theory is more efficient for these spheres. Interacting-array extensions and computational advantage remain prospective, contingent on operator access, conditioning, preparation, readout, and comparison with efficient classical solvers.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.