arXiv:2610.13090
A robust digital receiver architecture for continuous-variable quantum key distribution
Lu Fan, Xuesong Xu, Miao Yu, Zhengyu Li, Yunsong Yin, Hao Shi, Xuanyu Guo, Song Yu, Yichen Zhang
Abstract
Continuous-variable quantum key distribution utilizes advanced digital signal processing techniques to mitigate channel impairments, driving the progress of high-performance quantum secure communications. Specifically, digital heterodyne receivers are commonly implemented using down-conversion algorithms to detect both components simultaneously where the signal is modulated onto an intermediate frequency to avoid low-frequency noise and bypass stringent optical phase-locking requirements. However, a rigorous analysis of the quantum security implications of the digital down-conversion algorithm remains absent. In this paper, we investigate the algorithm process from the perspective of quantum operator evolution, revealing that the frequency folding effect inherent in down-conversion inevitably mixes the image-frequency information into the baseband signal. To address this issue, we propose a novel operator reconstruction detection scheme based on dual-path digital heterodyne receiver. By performing a non-equal weighted combination of the output operators along two optical paths in the digital domain, this scheme perfectly cancels out the image-frequency operator physically. The robust receiver architecture preserves the baseband noise-suppression advantages, inherently achieves perfect mode balancing for asymmetric optical detection losses, and fundamentally closes the image-frequency crosstalk. Practical experiments have validated the feasibility of the proposed architecture and its effective suppression of image-frequency noise, achieving a performance of 11.4 Mbps @ 42 km. This work lays a solid theoretical and algorithmic foundation for future high-performance, highly secure digital continuous-variable quantum key distribution systems.
AI Summary
The paper examines how digital down-conversion in intermediate-frequency continuous-variable QKD receivers couples an optical image-frequency mode into the measured quadratures. It derives the measurement operators through filtering, sampling and digital mixing, recovering the usual heterodyne model when the image mode is vacuum, while identifying how image-band noise or manipulation enters the output. It proposes a dual-balanced-detector receiver using a $90^\circ$ optical hybrid and phase-aligned, unequally weighted digital combinations of the two detector outputs. In the model, this cancels the incoming image-band operator and gives equal effective efficiencies for the reconstructed quadratures despite unequal detector losses. The equivalent detection efficiency is $\eta_t=2\eta_1\eta_2/(\eta_1+\eta_2)$. For imperfectly matched temporal modes, the derived image-to-signal coupling ratio is $(1-\gamma)/(1+\gamma)$, where $\gamma$ is their real overlap. A complementary digital output is proposed for monitoring image-band energy. Experiments use 500 MHz Gaussian modulation over 30 km and 42 km fiber links. Measured detector efficiencies of 0.57 and 0.51 yield an equivalent efficiency of approximately 0.54. Parameter estimation on eight blocks of approximately $10^7$ symbols gives mean excess noises of 0.029 and 0.034 shot-noise units, respectively. The corresponding calculated asymptotic key rates are 22.5 and 11.4 Mbps, assuming reconciliation efficiency 0.96 and 12.5% overhead. Exact image rejection requires matched detector and ADC temporal responses; mismatch leaves residual leakage quantified by the overlap model. The reported key rates are asymptotic estimates rather than finite-size secure-key demonstrations.
Central claim may not hold: Perfect image rejection requires matched I/Q temporal responses; unequal scalar weights compensate amplitude imbalance but leave the paper's own residual coupling (1−γ)/(1+γ) when the responses differ. The claimed comprehensive security closure lacks a quantified treatment of residual leakage and monitoring, and the assertion that every image-band attack produces an unambiguous power alarm fails for energy-preserving state changes. The experimental results show receiver operation and low aggregate excess noise but do not independently measure image-band suppression through controlled injection, rejection measurements, or a reconstruction-disabled comparison. The 11.4 Mbps result is an inferred asymptotic rate with assumed reconciliation efficiency rather than demonstrated extracted throughput, and the reported 42 km excess noise inconsistently changes from 0.034 to 0.022 SNU in the conclusion. The displayed signal/image wavepackets incorrectly conjugate the complete optical carrier instead of placing the two modes at the distinct optical frequencies ω_LO−Ω and ω_LO+Ω.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
- Comments
- 9 pages, 5 figures