arXiv:2610.10842
Optimal Diffractive Focusing of Vortex Beams
Roohollah Ghobadi, Carrie Rodriguez, Lukas Scarfe, Maxim A. Efremov, Ebrahim Karimi
Abstract
We formulate diffractive ring focusing of paraxial beams carrying orbital angular momentum (OAM) through a finite circular aperture as a variational optimization problem. For a fixed topological charge, we determine the real-valued radial pupil that maximizes the intensity at a prescribed ring radius and propagation distance under a normalization constraint on the input field. The resulting problem admits an exact analytical solution: the optimal pupil combines the familiar Fresnel phase structure with an OAM-dependent Bessel radial modulation, and the associated eigenvalue yields a rigorous upper bound on the achievable ring intensity. We further analyze the lens-assisted configuration and derive a simple bound that allows direct comparison between diffractive and refractive vortex focusing. The theory also provides a quantitative framework for evaluating the performance of practical mask designs, including binary Fresnel-Bessel zone plates and amplitude-weighted pupils. We have experimentally tested our predictions in the optical domain by implementing the corresponding vortex beam pupils and comparing their propagation and focusing performance with the optimal solution. Our results establish the vortex-beam analogue of optimal amplitude-only focusing and identify the fundamental limits governing diffractive concentration of structured waves
AI Summary
The paper asks which aperture-limited vortex-beam pupil maximizes intensity at a specified ring radius and propagation distance, for fixed orbital angular momentum $\ell$ and normalized input power. It optimizes over real-valued, potentially sign-changing radial pupils under scalar paraxial propagation. The objective is intensity at the prescribed radius, rather than power integrated over a finite-width annulus. The Fresnel–Bessel propagator gives a quadratic optimization whose kernel has rank at most two. Diagonalizing the resulting $2\times2$ problem yields an optimal pupil proportional to $J_\ell(\rho^*\rho/\tau_f)\cos[\rho^2/(2\tau_f)-\theta_\ell]$. The maximum intensity is $\Lambda_+=(\mathcal I_\ell+|\mathcal R_\ell|)/(2\tau_f^2)$, where the two integrals describe the Bessel-weighted radial norm and its Fresnel-phase coherence. Projection onto the two active eigenmodes determines any normalized pupil’s performance relative to this bound. For rapidly varying Fresnel oscillations, preserving the Bessel envelope while binarizing the Fresnel factor gives relative efficiency $8/\pi^2\approx0.811$. Fully binarizing both factors introduces an additional radial-weighting penalty; the stated large-radius-parameter limit is $512/(9\pi^4)\approx0.584$. Optical tests use phase-only spatial-light-modulator holograms and camera measurements for charges $\ell=0$–$5$. They compare propagation and focal-ring intensities across optimal and approximate masks, reporting higher intensity for Bessel-weighted than fully binary masks. The analysis assumes a finite circular aperture, a fixed OAM sector, and paraxial propagation. Experimentally, reduced optimal-mask efficiency at higher charge is attributed to limited modulator resolution.
Error found: The displayed optimal pupils have input power 4π² rather than the required unit power, although dividing them by 2π restores the stated optimum and intensity bound. The abstract promises a lens-assisted analysis and a diffractive-versus-refractive comparison bound that do not appear in the paper. The practical-mask definitions use inconsistent normalization factors and, for the amplitude-weighted mask, the wrong charge-dependent normalization integral, so they do not support the stated normalized efficiencies as written.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.