Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.06786

Quantum-optimized phase closure for robust interferometric imaging

Zhenning Liu, Emil T. Khabiboulline, Lorcan O. Conlon, Brittany McClinton, Aqil Sajjad, Saikat Guha, Jayadev Rajagopal, Alexey V. Gorshkov, Daniel Gottesman, Stephen T. Ridgway

quant-phSubmitted Oct 5, 2026• Announced Oct 6, 2026• 1 citation
arXivHTMLPDF

Abstract

Closure phase enables imaging with ground-based interferometric arrays by canceling telescope-dependent phase errors due to atmospheric fluctuations. It can be obtained by measuring fringe phases on individual baselines forming a triangle and summing them. We show that closure phases can be measured more accurately with fewer photons by performing joint measurements on multiple photons. We first establish that at least three photons from the same atmospheric temporal phase-stability window are required for closure-phase information to survive the unknown telescope-dependent phase noise, and show that joint three-photon measurements already provide an advantage over single-photon measurements in the minimal three-telescope setting. We then turn to large arrays and consider estimating all bispectra---complex quantities whose phases are the closure phases---under a global mean-square error criterion. Although an $m$-telescope array contains $Θ(m^2)$ independent triangle bispectra, we show that physical constraints on the visibilities make the total information content grow only nearly linearly with $m$ at fixed accuracy. Exploiting this structure, we construct an efficient protocol using at most three-photon joint measurements with photon cost $\tilde{O}(m)$, whereas any sequential single-photon protocol requires $Ω(m^2)$ photons. When the number of detected photons per temporal stability window scales linearly with the array size, this allows the required exposure time to remain independent of $m$ up to logarithmic factors. We further analyze the complementary high-precision regime using multiparameter quantum metrology and find a similar advantage for collective measurements. Overall, our results show that quantum information processing techniques can substantially improve the sensitivity and robustness of optical interferometry.

AI Summary

The paper asks whether collective photon measurements can improve atmospheric-noise-robust optical interferometry, targeting triangle bispectra $B_{ijk}=V_{ij}V_{jk}V_{ki}$ and their phases. It models weak thermal light conditioned on single-photon arrivals, with independent, uniformly random telescope piston phases that remain fixed within an atmospheric coherence window and a narrow spectral channel. Atmospheric averaging makes multiphoton states block diagonal in telescope occupation numbers. This establishes that two photons retain visibility-amplitude information but no closure-phase information; three photons are sufficient. For three telescopes and three photons per window, collective measurements provide $9/2$ times the optimal sequential single-photon Fisher information in the weak-visibility limit. A protocol nondestructively selects the one-photon-per-site sector, then uses single-photon Fourier measurements to obtain an unbiased complex-bispectrum estimator. For large arrays, the target is uniform mean-square error over all triangle bispectra. Positive semidefiniteness implies a description using $\widetilde O(m/\epsilon^2)$ bits at error $\epsilon^2$. An explicit protocol learns dominant eigenspaces of the squared-visibility matrix from two-photon measurements, then reconstructs bispectra through regression on three-photon records. It uses $\widetilde O(m/\epsilon^4+\epsilon^{-8})$ photons and polynomial-time classical processing. With exactly three photons per window, sequential single-photon protocols require $\Omega(m^2/\epsilon^2)$ photons in the worst case. Multiparameter bounds also address the high-precision regime. The protocols assume coherent memories and nondemolition occupation measurements; implementation losses are not analyzed. Fixed global bispectrum error does not guarantee precise individual closure phases or task-specific imaging performance. Strongly nonuniform weights, realistic source/array optimization, and efficient implementation of the shadow-tomography alternative remain open.

Some signs of AI-generated textAI use disclosedStrong assumptionsOverclaims
AI also assisted with literature searches and the writing and editing of the manuscript.

Central claim may not hold: The abstract states an unrestricted Ω(m²) sequential single-photon lower bound, whereas the corresponding theorem establishes it only when each atmospheric stability window contains exactly three photons. For windows containing Θ(m) photons, the paper establishes the collective upper bound but does not establish the same sequential lower bound, so the advertised asymptotic comparison is not demonstrated in that operating regime.

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Comments
33 pages, 1 figure

Related papers

Quantum-optimized phase closure for robust imaging

Alexey Vyacheslavovich Gorshkov, Daniel Gottesman, Emil T. Khabiboulline +4 more

Closure phase enables imaging with interferometric arrays. Classically it is obtained by summing fringe phases on three baselines, each derived from a resolved fringe and stabilized optical path, which sets a hard photon-flux limit. We study the limits of extracting the closure phase in a quantum approach. We find the optimal measurement from individual photons, giving an improvement in signal-to-noise compared to the traditional classical method and minimizing the need for stability at the timescale of photon arrivals. Measuring the closure phase from multiple photons simultaneously further increases the information extracted. These methods could extend closure phase to targets too faint for classical interferometry.

SPIE Optical and Infrared Interferometry and Imaging•Jul 1, 2026•2 citations

Long baseline optical interferometric imaging with active phase stabilization

Joshua J. Collier, Leuca Patmore, John S. Wallis +3 more

Astronomical observations allow us to better our understanding of the universe. As we observe smaller and more distance features, we run into the diffraction limit of our observation system. This limit is a function of the wavelength observed and the size of the primary aperture used. We can synthesize a larger primary aperture by implementing interferometry. Long baseline optical interferometry would lead to significant improvements in astronomical imaging resolution. Building optical interferometers with free space baselines becomes significantly more difficult as the baseline increases. A promising alternative is to use optical fiber to connect telescopes. Fiber-based interferometers are much more susceptible to phase noise than their free-space counterparts due to inhomogeneities in the fiber medium. This leads to significant degradation of interferometric signals used for astronomical measurements. We implement phase stabilization techniques used in quantum communications to stabilize an optical interferometer with a 170km pseudo-baseline. We use a quantum optimal measurement technique with this interferometer to resolve the extent of a source four times smaller than the diffraction limit of the system within 1.5% error. These results bring the potential for a full-scale on-sky long baseline interferometer significantly closer. A 350km baseline optical interferometer at 1550nm would allow us to resolve sub microarcsecond features in the universe.

physics.opticsCross-listedarXiv:2607.12167•Jul 15, 2026•1 citation

Noise-resistant phase imaging with intensity correlation

Jerzy Szuniewicz, Stanisław Kurdziałek, Sanjukta Kundu +4 more

Interferometric methods form the basis of highly sensitive measurement techniques from astronomy to bioimaging. Interferometry typically requires high stability between the measured and reference beams. The presence of rapid phase fluctuations washes out interference fringes, making phase profile recovery impossible. This challenge can be addressed by shortening the measurement time. However, such an approach reduces photon-counting rates, precluding applications in low-intensity imaging. We introduce a phase imaging technique which is immune to time-dependent phase fluctuations. Our technique, relying on intensity correlation instead of direct intensity measurements, allows one to obtain high interference visibility for arbitrarily long acquisition times. We prove the optimality of our method using the Cramér-Rao bound in the extreme case when no more than two photons are detected within the time window of phase stability. Our technique will broaden prospects in phase measurements, including emerging applications such as in infrared and x-ray imaging and quantum and matter-wave interferometry.

arXiv:2301.11969•Science Advances•Sep 22, 2023•20 citations

Imaging Stars at the Quantum Compatibility Limit

Xinyao Guo, Haixing Miao, Zheng Cai +1 more

Imaging astrophysical sources with a multi-station interferometer is intrinsically a multiparameter quantum-estimation problem. {Using tools from multiparameter quantum metrology,} we show that time-resolved repetitive or adaptive measurements in an \(N\)-station array suffer a fundamental array-level incompatibility among visibility estimators. Collective measurements, {which coherently process the received starlight across multiple time bins in a single joint readout}, remove the array-size penalty up to an order-unity factor, yielding an asymptotic \(O(\sqrt{N})\) enhancement for the {directional-averaged} SNR of visibility measurement. We then propose a memory-assisted interferometric architecture designed to implement collective readout through coherent storage and joint quantum processing. Imaging simulations and Fisher-information analyses demonstrate that collective measurements improve image reconstruction in near-term arrays and enhance the resolving power of future long-baseline architectures, with pronounced benefits for representative AGN targets such as NGC~4151 and 3C~273. These results highlight collective measurement as a promising building block for future quantum-assisted interferometric arrays for stellar imaging.

quant-pharXiv:2608.29689•Sep 1, 2026•0 citations

Photon-transmission-loss-independent quantum-enhanced interferometer

Yuqiao Shen, Zhou‐Kai Cao, Jian Leng +1 more

A quantum-enhanced telescope (interferometer) can have significant advantages in precisely measuring the angular position of remote objects through sending out ancillary quantum entanglement pairs alongside the large baselines of telescopes. In principle, the larger the baseline, the higher the expected measurement resolution. However, the well-known major problem of photon transmission loss would drastically undermine the practical application of all quantum-enhanced telescopes and optical interferometers that transmit photons along the baseline, especially for the large baselines required for high angular resolution. Here, we propose a photon-transmission-loss-independent quantum-enhanced interferometer that is robust to the transmission loss and keeps its advantages unchanged given whatever large baseline. This removes the well-known barrier to the practical application of quantum-enhanced telescopes. Moreover, in contrast to the previous results of quantum-entanglement-enhanced telescopes requesting sophisticated resources—perfect single-photon entanglement, photon-number-resolving detectors, or quantum memories—our method requires only threshold detectors and tunable coherent-state or two-mode squeezed-state sources, which are mature technologies nowadays, and it does not need any quantum memory. We demonstrate the high performance of our method using Fisher information. For the phase difference of weak light from a remote star, the high-quality result of Fisher information remains constant under arbitrarily large transmission loss, and hence all the advantageous results and the performance of our method are actually independent of transmission loss.

arXiv:2507.11342•Physical Review Research•Sep 28, 2025•2 citations

New strategies for phase estimation in quantum optics

Yang Gao

One important problem in quantum optics is to resolve an extremely small change of phase shift. The complementarity between photon number and phase sets an ultimate limit, the so-called Heisenberg limit, on the phase measurement sensitivity. The precise phase estimation has many technological applications, such as optical gyroscopes, gravitational wave detection, quantum imaging and sensing. In this thesis I show that the utilization of the parity measurement in the optical interferometry is actually applicable to a wide range of quantum entangled input states. Comparison of the performance of the various quantum states then can be made within such a unified output measurement scheme. Based on such a universal detection scheme, we present a comparison of the phase sensitivity reduction for various quantum states of light in the presence of photon loss. I also provide a simple condition that could be used to check whether an arbitrary state can achieve the Heisenberg limit independently of the detection scheme. It implies that the fidelity between the two output states with zero phase and minimal detectable phase applied respectively should significantly different from unity as the minimal phase shift scaling as 1/N, whereas the average number of input photons N goes to infinity. Next I give several measures to characterize the which-way information in the interference experiment. We define a new distinguishability associated with the fidelity between two density matrices to measure the which-way information. We demonstrate that the changes of mutual entropy as well as the entanglement of formation of the whole system, i.e. the physical system plus the which-way detector can also be used to describe the which-way information. With such quantities, we show that as the fringe visibility of the interference pattern gets larger, the less which-way information is obtained. Finally, I show that coherent light coupled with photon number resolving detectors can provide a super-resolution much below the Rayleigh diffraction limit, with sensitivity no worse than shot-noise in terms of the detected photon power. This scheme would have applications to laser radar, given the difficulty in making entangled states of light, as well as their susceptibility to atmospheric absorption.

Civil War Book Review•May 31, 2010•0 citations
Closure phase enables imaging with ground-based interferometric arrays by canceling telescope-dependent phase errors due to atmospheric fluctuations. It can be obtained by measuring fringe phases on individual baselines forming a triangle and summing them. We show that closure phases can be measured more accurately with fewer photons by performing joint measurements on multiple photons. We first establish that at least three photons from the same atmospheric temporal phase-stability window are required for closure-phase information to survive the unknown telescope-dependent phase noise, and show that joint three-photon measurements already provide an advantage over single-photon measurements in the minimal three-telescope setting. We then turn to large arrays and consider estimating all bispectra---complex quantities whose phases are the closure phases---under a global mean-square error criterion. Although an mmm-telescope array contains Θ(m2)Θ(m^2)Θ(m2) independent triangle bispectra, we show that physical constraints on the visibilities make the total information content grow only nearly linearly with mmm at fixed accuracy. Exploiting this structure, we construct an efficient protocol using at most three-photon joint measurements with photon cost O~(m)\tilde{O}(m)O~(m), whereas any sequential single-photon protocol requires Ω(m2)Ω(m^2)Ω(m2) photons. When the number of detected photons per temporal stability window scales linearly with the array size, this allows the required exposure time to remain independent of mmm up to logarithmic factors. We further analyze the complementary high-precision regime using multiparameter quantum metrology and find a similar advantage for collective measurements. Overall, our results show that quantum information processing techniques can substantially improve the sensitivity and robustness of optical interferometry.
The paper asks whether collective photon measurements can improve atmospheric-noise-robust optical interferometry, targeting triangle bispectra Bijk=VijVjkVkiB_{ijk}=V_{ij}V_{jk}V_{ki}Bijk​=Vij​Vjk​Vki​ and their phases. It models weak thermal light conditioned on single-photon arrivals, with independent, uniformly random telescope piston phases that remain fixed within an atmospheric coherence window and a narrow spectral channel.
Atmospheric averaging makes multiphoton states block diagonal in telescope occupation numbers. This establishes that two photons retain visibility-amplitude information but no closure-phase information; three photons are sufficient. For three telescopes and three photons per window, collective measurements provide 9/29/29/2 times the optimal sequential single-photon Fisher information in the weak-visibility limit. A protocol nondestructively selects the one-photon-per-site sector, then uses single-photon Fourier measurements to obtain an unbiased complex-bispectrum estimator.
For large arrays, the target is uniform mean-square error over all triangle bispectra. Positive semidefiniteness implies a description using O~(m/ϵ2)\widetilde O(m/\epsilon^2)O(m/ϵ2) bits at error ϵ2\epsilon^2ϵ2. An explicit protocol learns dominant eigenspaces of the squared-visibility matrix from two-photon measurements, then reconstructs bispectra through regression on three-photon records. It uses O~(m/ϵ4+ϵ−8)\widetilde O(m/\epsilon^4+\epsilon^{-8})O(m/ϵ4+ϵ−8) photons and polynomial-time classical processing. With exactly three photons per window, sequential single-photon protocols require Ω(m2/ϵ2)\Omega(m^2/\epsilon^2)Ω(m2/ϵ2) photons in the worst case. Multiparameter bounds also address the high-precision regime.
The protocols assume coherent memories and nondemolition occupation measurements; implementation losses are not analyzed. Fixed global bispectrum error does not guarantee precise individual closure phases or task-specific imaging performance. Strongly nonuniform weights, realistic source/array optimization, and efficient implementation of the shadow-tomography alternative remain open.
Closure phase enables imaging with interferometric arrays. Classically it is obtained by summing fringe phases on three baselines, each derived from a resolved fringe and stabilized optical path, which sets a hard photon-flux limit. We study the limits of extracting the closure phase in a quantum approach. We find the optimal measurement from individual photons, giving an improvement in signal-to-noise compared to the traditional classical method and minimizing the need for stability at the timescale of photon arrivals. Measuring the closure phase from multiple photons simultaneously further increases the information extracted. These methods could extend closure phase to targets too faint for classical interferometry.
Astronomical observations allow us to better our understanding of the universe. As we observe smaller and more distance features, we run into the diffraction limit of our observation system. This limit is a function of the wavelength observed and the size of the primary aperture used. We can synthesize a larger primary aperture by implementing interferometry. Long baseline optical interferometry would lead to significant improvements in astronomical imaging resolution. Building optical interferometers with free space baselines becomes significantly more difficult as the baseline increases. A promising alternative is to use optical fiber to connect telescopes. Fiber-based interferometers are much more susceptible to phase noise than their free-space counterparts due to inhomogeneities in the fiber medium. This leads to significant degradation of interferometric signals used for astronomical measurements. We implement phase stabilization techniques used in quantum communications to stabilize an optical interferometer with a 170km pseudo-baseline. We use a quantum optimal measurement technique with this interferometer to resolve the extent of a source four times smaller than the diffraction limit of the system within 1.5% error. These results bring the potential for a full-scale on-sky long baseline interferometer significantly closer. A 350km baseline optical interferometer at 1550nm would allow us to resolve sub microarcsecond features in the universe.
Interferometric methods form the basis of highly sensitive measurement techniques from astronomy to bioimaging. Interferometry typically requires high stability between the measured and reference beams. The presence of rapid phase fluctuations washes out interference fringes, making phase profile recovery impossible. This challenge can be addressed by shortening the measurement time. However, such an approach reduces photon-counting rates, precluding applications in low-intensity imaging. We introduce a phase imaging technique which is immune to time-dependent phase fluctuations. Our technique, relying on intensity correlation instead of direct intensity measurements, allows one to obtain high interference visibility for arbitrarily long acquisition times. We prove the optimality of our method using the Cramér-Rao bound in the extreme case when no more than two photons are detected within the time window of phase stability. Our technique will broaden prospects in phase measurements, including emerging applications such as in infrared and x-ray imaging and quantum and matter-wave interferometry.
Imaging astrophysical sources with a multi-station interferometer is intrinsically a multiparameter quantum-estimation problem. {Using tools from multiparameter quantum metrology,} we show that time-resolved repetitive or adaptive measurements in an NNN-station array suffer a fundamental array-level incompatibility among visibility estimators. Collective measurements, {which coherently process the received starlight across multiple time bins in a single joint readout}, remove the array-size penalty up to an order-unity factor, yielding an asymptotic O(N)O(\sqrt{N})O(N​) enhancement for the {directional-averaged} SNR of visibility measurement. We then propose a memory-assisted interferometric architecture designed to implement collective readout through coherent storage and joint quantum processing. Imaging simulations and Fisher-information analyses demonstrate that collective measurements improve image reconstruction in near-term arrays and enhance the resolving power of future long-baseline architectures, with pronounced benefits for representative AGN targets such as NGC~4151 and 3C~273. These results highlight collective measurement as a promising building block for future quantum-assisted interferometric arrays for stellar imaging.
A quantum-enhanced telescope (interferometer) can have significant advantages in precisely measuring the angular position of remote objects through sending out ancillary quantum entanglement pairs alongside the large baselines of telescopes. In principle, the larger the baseline, the higher the expected measurement resolution. However, the well-known major problem of photon transmission loss would drastically undermine the practical application of all quantum-enhanced telescopes and optical interferometers that transmit photons along the baseline, especially for the large baselines required for high angular resolution. Here, we propose a photon-transmission-loss-independent quantum-enhanced interferometer that is robust to the transmission loss and keeps its advantages unchanged given whatever large baseline. This removes the well-known barrier to the practical application of quantum-enhanced telescopes. Moreover, in contrast to the previous results of quantum-entanglement-enhanced telescopes requesting sophisticated resources—perfect single-photon entanglement, photon-number-resolving detectors, or quantum memories—our method requires only threshold detectors and tunable coherent-state or two-mode squeezed-state sources, which are mature technologies nowadays, and it does not need any quantum memory. We demonstrate the high performance of our method using Fisher information. For the phase difference of weak light from a remote star, the high-quality result of Fisher information remains constant under arbitrarily large transmission loss, and hence all the advantageous results and the performance of our method are actually independent of transmission loss.
One important problem in quantum optics is to resolve an extremely small change of phase shift. The complementarity between photon number and phase sets an ultimate limit, the so-called Heisenberg limit, on the phase measurement sensitivity. The precise phase estimation has many technological applications, such as optical gyroscopes, gravitational wave detection, quantum imaging and sensing. In this thesis I show that the utilization of the parity measurement in the optical interferometry is actually applicable to a wide range of quantum entangled input states. Comparison of the performance of the various quantum states then can be made within such a unified output measurement scheme. Based on such a universal detection scheme, we present a comparison of the phase sensitivity reduction for various quantum states of light in the presence of photon loss. I also provide a simple condition that could be used to check whether an arbitrary state can achieve the Heisenberg limit independently of the detection scheme. It implies that the fidelity between the two output states with zero phase and minimal detectable phase applied respectively should significantly different from unity as the minimal phase shift scaling as 1/N, whereas the average number of input photons N goes to infinity. Next I give several measures to characterize the which-way information in the interference experiment. We define a new distinguishability associated with the fidelity between two density matrices to measure the which-way information. We demonstrate that the changes of mutual entropy as well as the entanglement of formation of the whole system, i.e. the physical system plus the which-way detector can also be used to describe the which-way information. With such quantities, we show that as the fringe visibility of the interference pattern gets larger, the less which-way information is obtained. Finally, I show that coherent light coupled with photon number resolving detectors can provide a super-resolution much below the Rayleigh diffraction limit, with sensitivity no worse than shot-noise in terms of the detected photon power. This scheme would have applications to laser radar, given the difficulty in making entangled states of light, as well as their susceptibility to atmospheric absorption.