arXiv:2610.03609
The QICK Box: A Modular RF Front-End System for Quantum Control and Readout
L. Arnaldi, D. Martin, S. Sussman, S. Uemura, K. Treptow, N. Wilcer, A. Colón Cesaní, O. Seidel, K. Anyang, G. Bratrud, F. Abouzahr, J. Christiansen-Salameh, D. Baxter, G. Cancelo
Abstract
The QICK (Quantum Instrumentation Control Kit), first introduced in 2022, is a standalone open source control system for quantum information science. Since then, QICK has been migrated to new hardware platforms, expanded its functionality for applications with different types of qubits (superconducting, atomic, ion-trapped, and spin defects), as well as quantum sensors, and quantum networks. QICK is a highly optimized control kit, with a library of functions that can be used for more than one application. In particular, the software and firmware are customized to minimize latency and maximize control performance and throughput. In this white paper, we describe hardware details and performance of the QICK Box. The QICK Box features up to 16 outputs, up to 8 inputs, and 8 20-bit DC biases. Modular output and input daughtercards give the choice of signal chains optimized for fast DC-coupled signals or RF signals up to 10 GHz. Power levels, step attenuation, and bandpass filtering are controlled by software. We demonstrate the system's performance through single-shot readout measurements of a six-transmon device at the Quantum Underground Instrumentation Experimental Testbed (QUIET) at Fermilab, achieving (91.7 +/- 0.4)% readout fidelity limited by T1 decay during the readout. The single shot readout signal-to-noise ratio (SNR) is 4.4 +/- 0.1 without a quantum amplifier, confirming that the QICK Box is suitable for high-fidelity quantum control and measurement applications. Advances in firmware and software will be described in a separate paper.
AI Summary
The paper describes the QICK Box, a modular analog front end for the open-source, RFSoC-based Quantum Instrumentation Control Kit. It addresses integration of signal conditioning, filtering, gain control, and bias generation that would otherwise require separate room-temperature electronics. The main new hardware is a companion motherboard with interchangeable daughtercards, supporting up to 16 outputs, eight inputs, eight 20-bit $\pm10\,\mathrm{V}$ bias channels, and 16 digital I/O ports. RF daughtercards cover approximately 0.1–9 GHz, while DC-coupled variants cover DC–1.5 GHz. Bench characterization measures frequency response, attenuation linearity, spectral purity, and input noise. Reported results include 0.25 dB attenuation steps, 0.22 dB RMS deviation from ideal attenuation response, approximately 75 dBc non-harmonic spurious-free dynamic range, and an input noise temperature near 100 K over 3–6 GHz. Programmable input bandpass filtering reduces integrated RMS noise by 7.6 dB in a roughly $1\,\mu\mathrm{s}$ acquisition window. Dispersive readout on a six-transmon device, addressing qubits individually and using a cryogenic HEMT without a quantum amplifier, yields $91.7\pm0.4\%$ single-shot fidelity from 3,000 shots per prepared state. Gaussian fits to the outer sides of the readout distributions give an SNR of $4.4\pm0.1$. The paper attributes most infidelity to relaxation during the $5.6\,\mu\mathrm{s}$ readout window, with $T_1=58.3\pm4.1\,\mu\mathrm{s}$; thermal population, state preparation, and distribution overlap also contribute. RF gain and noise performance degrade at higher frequencies. No entangling operations are demonstrated, and firmware/software advances are reserved for a separate paper.
Error found: The abstract's claim of RF signal chains up to 10 GHz exceeds the complete front-end specifications and characterization presented through 9 GHz. The reported 91.7% is described as maximum cumulative histogram contrast, which corresponds to 95.85% equal-prior assignment fidelity, but the abstract does not clarify this distinction. For the stated contrast convention, the binomial uncertainty formula used for the reported fidelity is incorrect: fixed-threshold uncertainty is approximately 0.50–0.52 percentage points, not the formula's 0.36 percentage points. The conclusion's claim of input gain greater than 45 dB at 9 GHz contradicts the characterization section's stated maximum of 37 dB.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.