Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.01183

Additive solid immersion lenses for enhanced collection efficiency of shallow NV centers by pulsed laser deposition and structurization of high-k amorphous oxides

Michael S. Bar, Nicole Raatz, Max Kneiss, Andreas Koenig, Marius Grundmann, Holger von Wenckstern

cond-mat.mtrl-sciphysics.opticsquant-phSubmitted Oct 1, 2026• Announced Oct 2, 2026• 0 citations
arXivHTMLPDF

Abstract

The negatively charged nitrogen-vacancy ($\mathrm{NV}^-$) defect in diamond can be used for quantum information processing via the readout of the radiative decay of the excited state into the ground state. The large refractive index mismatch of diamond and air causes low photon extraction efficiency due to total internal reflection losses. Here, we investigate the photon extraction numerically and report additive solid immersion lenses (SILs) consisting of the high-k dielectric yttria-stabilized-zirconia (YSZ) for surface modification and enhanced light extraction of shallow implanted nitrogen-vacancy centers. We demonstrate an average increase of 63% in saturation intensity using a scalable bottum up room temperature pulsed laser deposition and photolithography structurization process. The average necessary laser intensity for saturation is reduced by 33% by the SILs.

AI Summary

Shallow NV centers cannot readily use solid immersion lenses (SILs) carved into diamond because they lie only tens of nanometers below the surface. This paper investigates additive yttria-stabilized-zirconia (YSZ) SILs for improving photon extraction without machining the diamond. Monte Carlo geometric-optics simulations examine refractive-index matching, lateral misalignment and departures from hemispherical geometry. Ideal lenses with refractive index near $2.1$ give approximately sixfold extraction enhancement; larger lenses tolerate greater absolute placement errors. Room-temperature pulsed laser deposition through patterned photoresist, with oblique deposition and sample rotation, produces curved lens arrays. The deposited YSZ has refractive index $n=2.17$ at 632 nm and fluorescence comparable to the diamond reference under the tested excitation conditions. Confocal measurements compare shallow implanted NV centers beneath SILs, beneath planar YSZ and on untreated diamond. Mean background-corrected saturation counts increase from 96 kc/s on bare diamond to 160 kc/s beneath SILs, a 63% enhancement; planar YSZ gives 98 kc/s. Mean saturation power decreases from 3.6 to 2.5 mW, reported as a 33% reduction. Simulations using measured lens topography reproduce the observed offset dependence reasonably for NV centers 1–3 $\mu$m from lens centers. The measurements pool single NVs and pairs, with and without sulfur co-doping, contributing to variability. Centrally located NVs have limited statistics. Fabrication leaves peripheral “fencing” of uncertain optical effect. The model omits wave optics, NV dipole-emission anisotropy, multiple internal reflections and collection numerical aperture. The mechanism behind reduced saturation power remains unresolved.

No sign of AI-generated textIncrementalStrong assumptions

Central claim may not hold: The reported saturation-count means imply a 66.7% increase over bare diamond, while the claimed 63% matches the planar-YSZ reference instead. The reported excitation reduction concerns nominal laser power, whereas the abstract calls it an intensity reduction without establishing local excitation intensity. Pooling emitters with different doping and emitter multiplicity without reporting their distribution across surface conditions leaves the causal attribution of the average enhancement to the SILs conditional.

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Related papers

Strongly enhanced photon collection from diamond defect centers under microfabricated integrated solid immersion lenses

John Patrick Hadden, J. P. Harrison, A. C. Stanley‐Clarke +5 more

The efficiency of photon collection from optically active defect centers in bulk diamond is greatly reduced by refraction at the diamond-air interface. We report on the fabrication and measurement of a geometrical solution to the problem; integrated solid immersion lenses (SILs) etched directly into the surface of diamond. An increase of a factor of 10 was observed in the saturated count-rate from a single negatively charged nitrogen-vacancy (NV−) within a 5 μm diameter SIL compared with NV−’s under a planar surface in the same crystal. Such a system is potentially scalable and easily adaptable to other defect centers in bulk diamond.

arXiv:1006.2093•Applied Physics Letters•Dec 13, 2010•297 citations

Creation of low-charge-noise nitrogen-vacancy centers in diamond with solid-immersion lens-assisted laser writing

Viktoria Yurgens, Josh A. Zuber, Sigurd Flågan +6 more

The negatively charged nitrogen-vacancy (NV) center in diamond is among the most promising solid-state systems implementations of a quantum bit. However, integration of the NV center into any efficient photonic environment requires microstructuring the diamond at below-micrometer scale. Preserving the low NV zero-phonon line inhomogeneous broadening during this process is a major challenge with standard NV creation methods. This issue severely limits practical applications of NV centers. Initial studies on pulsed-laser assisted creation of NVs yielded promising results by creating NVs with low inhomogeneous broadening at desired spatial locations in diamond [1]. Crucially, the lattice damage resulting from implantation of energetic ions was avoided. However, the method relied on a narrow window of parameters for successful writing. We widen this window by using a solid immersion lens (SIL), which facilitates laser writing over a broad range of pulse energies and allows for vacancy formation close to a diamond surface without inducing surface graphitization. We operate in the previously unexplored regime where lattice vacancies are created following tunneling breakdown rather than multiphoton ionization [2]. We present NV arrays that have been created between 1 and 40 µm from a diamond surface, all presenting optical linewidth distributions with means as low as 61.0±22.8 MHz [2], including spectral diffusion induced by off-resonant repump for charge stabilization. This emphasizes the exceptionally low charge-noise environment of laser-written NVs. Such high-quality NV centers are excellent candidates for practical applications employing two-photon quantum interference with separate NV centers. Finally, we propose a model for disentangling power broadening from inhomogeneous broadening in the NV zero-phonon line optical linewidth [2]. [1] Y.-C. Chen, P. S. Salter, S. Knauer, … and J. M. Smith, Nat. Photonics 11, 77 (2017). [2] V. Yurgens, J.A Zuber, S. Flågan, M. De Luca, B.J. Shields, I. Zardo, P. Maletinsky, R.J. Warburton, and T. Jakubczyk, ACS Photonics 8, 1726–1734 (2021)

SPIE Quantum Technologies•Jun 3, 2022•0 citations

Low-Charge-Noise Nitrogen-Vacancy Centers in Diamond Created Using Laser Writing with a Solid-Immersion Lens

Viktoria Yurgens, Josh A. Zuber, Sigurd Flågan +6 more

High Resolution Image Download MS PowerPoint Slide We report on pulsed-laser-induced generation of nitrogen-vacancy (NV) centers in diamond facilitated by a solid-immersion lens (SIL). The SIL enables laser writing at energies as low as 5.8 nJ per pulse and allows vacancies to be formed close to a diamond surface without inducing surface graphitization. We operate in the previously unexplored regime, where lattice vacancies are created following tunneling breakdown rather than multiphoton ionization. We present three samples in which NV center arrays were laser-written at distances between ∼1 and 40 μm from a diamond surface, all presenting narrow distributions of optical linewidths with means between 62.1 and 74.5 MHz. The linewidths include the effect of long-term spectral diffusion induced by a 532 nm repump laser for charge-state stabilization, thereby emphasizing the particularly low-charge-noise environment of the created color centers. Such high-quality NV centers are excellent candidates for practical applications employing two-photon quantum interference with separate NV centers. Finally, we propose a model for disentangling power broadening from inhomogeneous broadening in the NV center optical linewidth.

arXiv:2102.11804•ACS Photonics•Jun 3, 2021•48 citations

Enhanced Emission and Two-Photon Interference of Lead-Vacancy Centers in Diamond Solid Immersion Lenses

Koyo Hirai, Eiki Ota, Yiyang Chen +8 more

A negatively charged lead-vacancy (PbV-) center in diamond is a novel quantum system which can be operated at a high temperature above 4 K owing to its large ground state splitting. To unlock the quantum properties of the PbV- center, the enhancement of the fluorescence intensity is a key issue. Here, we demonstrate enhanced emission from PbV- centers by a factor of approximately 10 using solid immersion lenses (SILs) fabricated on rough diamond surface caused by high-temperature anneal over 2000°C. Resonant excitation reveals the narrow emission close to the transform-limited linewidth. Furthermore, we demonstrate two-photon interference using one single PbV- center in an SIL. This enhanced emission and indistinguishability will lead to further development of the PbV- center towards quantum network node applications.

quant-pharXiv:2609.19220•Sep 17, 2026•0 citations

Laser written nitrogen vacancy centers in diamond integrated with transfer print GaN solid immersion lenses

Xingrui Cheng, Nils Kolja Wessling, Saptarsi Ghosh +9 more

Laser-written Nitrogen Vacancy (NV−) centers are combined with transfer-printed GaN micro-lenses to increase fluorescent light collection by reducing total internal reflection at the planar diamond interface. We find a 2x improvement of fluorescent light collection using a 0.95 NA air objective at room temperature, in agreement with FDTD simulations. The nature of the transfer print micro-lenses leads to better performance with lower Numerical Aperture (NA) collection, as confirmed by results with a 0.5NA air objective which show improvement greater than 5x. The approach is attractive for scalable integrated quantum technologies.

Nanoscale and Quantum Materials: From Synthesis and Laser Processing to Applications•Mar 12, 2024•0 citations

Lead-Vacancy Centers in Diamond Solid Immersion Lens Fabricated on HPHT-Treated Substrates

K. Hirai, Y. Eugene Chen, T. Makino +5 more

Lead-vacancy (PbV) centers in diamond are emerging as a promising quantum emitter for the implementation of large-scale quantum networks. The PbV center is expected to exhibit high robustness against temperature among group-Ⅳ vacancy centers due to the large ground state splitting, and thus to show qubit operation without a dilution refrigerator. However, the fluorescence enhancement using photonic structures remains a challenge for the high-quality PbV centers formed through high-pressure and high-temperature (HPHT) annealing. In this study, we demonstrate the fabrication of the diamond solid immersion lenses (SILs) incorporating PbV centers on rough HPHT-treated diamond substrates and the enhancement of the fluorescence intensity from the PbV centers. We employed focused ion beam to fabricate SILs with a diameter of ~1 um and a height of ~0.5 um. We confirmed the enhancement of the fluorescence intensity from PbV centers under non-resonant excitation. Furthermore, transform-limited linewidths were observed under resonant excitation. Our results will pave the way for further optical and spin measurements of the PbV centers.

•Mar 17, 2026•0 citations
The negatively charged nitrogen-vacancy (NV−\mathrm{NV}^-NV−) defect in diamond can be used for quantum information processing via the readout of the radiative decay of the excited state into the ground state. The large refractive index mismatch of diamond and air causes low photon extraction efficiency due to total internal reflection losses. Here, we investigate the photon extraction numerically and report additive solid immersion lenses (SILs) consisting of the high-k dielectric yttria-stabilized-zirconia (YSZ) for surface modification and enhanced light extraction of shallow implanted nitrogen-vacancy centers. We demonstrate an average increase of 63% in saturation intensity using a scalable bottum up room temperature pulsed laser deposition and photolithography structurization process. The average necessary laser intensity for saturation is reduced by 33% by the SILs.
Shallow NV centers cannot readily use solid immersion lenses (SILs) carved into diamond because they lie only tens of nanometers below the surface. This paper investigates additive yttria-stabilized-zirconia (YSZ) SILs for improving photon extraction without machining the diamond.
Monte Carlo geometric-optics simulations examine refractive-index matching, lateral misalignment and departures from hemispherical geometry. Ideal lenses with refractive index near 2.12.12.1 give approximately sixfold extraction enhancement; larger lenses tolerate greater absolute placement errors. Room-temperature pulsed laser deposition through patterned photoresist, with oblique deposition and sample rotation, produces curved lens arrays. The deposited YSZ has refractive index n=2.17n=2.17n=2.17 at 632 nm and fluorescence comparable to the diamond reference under the tested excitation conditions.
Confocal measurements compare shallow implanted NV centers beneath SILs, beneath planar YSZ and on untreated diamond. Mean background-corrected saturation counts increase from 96 kc/s on bare diamond to 160 kc/s beneath SILs, a 63% enhancement; planar YSZ gives 98 kc/s. Mean saturation power decreases from 3.6 to 2.5 mW, reported as a 33% reduction. Simulations using measured lens topography reproduce the observed offset dependence reasonably for NV centers 1–3 μ\muμm from lens centers.
The measurements pool single NVs and pairs, with and without sulfur co-doping, contributing to variability. Centrally located NVs have limited statistics. Fabrication leaves peripheral “fencing” of uncertain optical effect. The model omits wave optics, NV dipole-emission anisotropy, multiple internal reflections and collection numerical aperture. The mechanism behind reduced saturation power remains unresolved.
The efficiency of photon collection from optically active defect centers in bulk diamond is greatly reduced by refraction at the diamond-air interface. We report on the fabrication and measurement of a geometrical solution to the problem; integrated solid immersion lenses (SILs) etched directly into the surface of diamond. An increase of a factor of 10 was observed in the saturated count-rate from a single negatively charged nitrogen-vacancy (NV−) within a 5 μm diameter SIL compared with NV−’s under a planar surface in the same crystal. Such a system is potentially scalable and easily adaptable to other defect centers in bulk diamond.
The negatively charged nitrogen-vacancy (NV) center in diamond is among the most promising solid-state systems implementations of a quantum bit. However, integration of the NV center into any efficient photonic environment requires microstructuring the diamond at below-micrometer scale. Preserving the low NV zero-phonon line inhomogeneous broadening during this process is a major challenge with standard NV creation methods. This issue severely limits practical applications of NV centers. Initial studies on pulsed-laser assisted creation of NVs yielded promising results by creating NVs with low inhomogeneous broadening at desired spatial locations in diamond [1]. Crucially, the lattice damage resulting from implantation of energetic ions was avoided. However, the method relied on a narrow window of parameters for successful writing. We widen this window by using a solid immersion lens (SIL), which facilitates laser writing over a broad range of pulse energies and allows for vacancy formation close to a diamond surface without inducing surface graphitization. We operate in the previously unexplored regime where lattice vacancies are created following tunneling breakdown rather than multiphoton ionization [2]. We present NV arrays that have been created between 1 and 40 µm from a diamond surface, all presenting optical linewidth distributions with means as low as 61.0±22.8 MHz [2], including spectral diffusion induced by off-resonant repump for charge stabilization. This emphasizes the exceptionally low charge-noise environment of laser-written NVs. Such high-quality NV centers are excellent candidates for practical applications employing two-photon quantum interference with separate NV centers. Finally, we propose a model for disentangling power broadening from inhomogeneous broadening in the NV zero-phonon line optical linewidth [2]. [1] Y.-C. Chen, P. S. Salter, S. Knauer, … and J. M. Smith, Nat. Photonics 11, 77 (2017). [2] V. Yurgens, J.A Zuber, S. Flågan, M. De Luca, B.J. Shields, I. Zardo, P. Maletinsky, R.J. Warburton, and T. Jakubczyk, ACS Photonics 8, 1726–1734 (2021)
High Resolution Image Download MS PowerPoint Slide We report on pulsed-laser-induced generation of nitrogen-vacancy (NV) centers in diamond facilitated by a solid-immersion lens (SIL). The SIL enables laser writing at energies as low as 5.8 nJ per pulse and allows vacancies to be formed close to a diamond surface without inducing surface graphitization. We operate in the previously unexplored regime, where lattice vacancies are created following tunneling breakdown rather than multiphoton ionization. We present three samples in which NV center arrays were laser-written at distances between ∼1 and 40 μm from a diamond surface, all presenting narrow distributions of optical linewidths with means between 62.1 and 74.5 MHz. The linewidths include the effect of long-term spectral diffusion induced by a 532 nm repump laser for charge-state stabilization, thereby emphasizing the particularly low-charge-noise environment of the created color centers. Such high-quality NV centers are excellent candidates for practical applications employing two-photon quantum interference with separate NV centers. Finally, we propose a model for disentangling power broadening from inhomogeneous broadening in the NV center optical linewidth.
A negatively charged lead-vacancy (PbV-) center in diamond is a novel quantum system which can be operated at a high temperature above 4 K owing to its large ground state splitting. To unlock the quantum properties of the PbV- center, the enhancement of the fluorescence intensity is a key issue. Here, we demonstrate enhanced emission from PbV- centers by a factor of approximately 10 using solid immersion lenses (SILs) fabricated on rough diamond surface caused by high-temperature anneal over 2000°C. Resonant excitation reveals the narrow emission close to the transform-limited linewidth. Furthermore, we demonstrate two-photon interference using one single PbV- center in an SIL. This enhanced emission and indistinguishability will lead to further development of the PbV- center towards quantum network node applications.
Laser-written Nitrogen Vacancy (NV−) centers are combined with transfer-printed GaN micro-lenses to increase fluorescent light collection by reducing total internal reflection at the planar diamond interface. We find a 2x improvement of fluorescent light collection using a 0.95 NA air objective at room temperature, in agreement with FDTD simulations. The nature of the transfer print micro-lenses leads to better performance with lower Numerical Aperture (NA) collection, as confirmed by results with a 0.5NA air objective which show improvement greater than 5x. The approach is attractive for scalable integrated quantum technologies.
Lead-vacancy (PbV) centers in diamond are emerging as a promising quantum emitter for the implementation of large-scale quantum networks. The PbV center is expected to exhibit high robustness against temperature among group-Ⅳ vacancy centers due to the large ground state splitting, and thus to show qubit operation without a dilution refrigerator. However, the fluorescence enhancement using photonic structures remains a challenge for the high-quality PbV centers formed through high-pressure and high-temperature (HPHT) annealing. In this study, we demonstrate the fabrication of the diamond solid immersion lenses (SILs) incorporating PbV centers on rough HPHT-treated diamond substrates and the enhancement of the fluorescence intensity from the PbV centers. We employed focused ion beam to fabricate SILs with a diameter of ~1 um and a height of ~0.5 um. We confirmed the enhancement of the fluorescence intensity from PbV centers under non-resonant excitation. Furthermore, transform-limited linewidths were observed under resonant excitation. Our results will pave the way for further optical and spin measurements of the PbV centers.