arXiv:2609.38687
Polarisation-resolved identification of spontaneous four-wave mixing processes in a multimode fused tapered fibre coupler
Jefferson Flórez, Chams Baker, Benjamin J. Sussman, Xiaoyi Bao, Jeff S. Lundeen, Lambert Giner
Abstract
Integrated quantum photonics benefits from photon-pair sources that generate photons directly in waveguides, where they can be efficiently collected, routed, and manipulated. Here, we investigate spontaneous four-wave mixing (SFWM) in a fused tapered-fibre microcoupler formed from two single-mode fibres, and report four contributions. First, we observe SFWM photon pairs in this multimode device: its elliptical central region supports three spatial mode profiles, each with two polarisations, giving six guided modes, and pumping it near 800 nm yields two photon pairs at 648/1048 nm and 660/1021 nm. Second, because several allowed SFWM processes produce similar wavelengths and wavelength alone does not identify their origin, we distinguish the processes by combining phase-matching calculations and selection rules with two independent polarisation measurements: the dependence of the coincidence rate on pump polarisation and polarisation tomography of the generated photons. Third, within the present geometrical model, we find that the 660/1021 nm pair is generated by co-polarised pump photons in a process occurring entirely within a single higher-order mode, whereas the 648/1048 nm pair is generated by orthogonally polarised pump photons in an intermodal process coupling a fundamental and a higher-order mode; the signal photons from the two processes have similar output polarisations, while the idler photons are nearly orthogonal. Fourth, extending the analysis beyond the measured operating point, we theoretically identify pairs of simultaneous SFWM processes driven by a common pump that could generate either polarisation entanglement or composite spatial-polarisation entanglement, depending on the pump wavelength. More generally, this work provides a practical strategy for identifying intermodal SFWM processes in multimode waveguides when spectral information alone is insufficient.
AI Summary
The paper asks how to identify spontaneous four-wave-mixing (SFWM) processes in a multimode waveguide when their emission wavelengths do not uniquely determine the participating modes. It studies a fused tapered-fibre microcoupler modelled as a $1.16\times0.87\,\mu\mathrm{m}$ elliptical silica waist supporting six guided modes. Femtosecond pumping near $800$ nm produces two signal–idler bands, at $648/1048$ nm and $660/1021$ nm. Quadratic power scaling and signal–idler cross-correlation $g^{(2)}(0)\approx4$ support pair generation; without autocorrelation measurements, the latter is not a standalone nonclassicality test. Process identification combines simulated phase matching and symmetry selection rules with pump-polarisation-dependent coincidence rates and single-photon polarisation tomography. The coincidence modulations indicate orthogonally polarised pump photons for $648/1048$ nm and co-polarised pump photons for $660/1021$ nm. Tomography gives trace distances $0.35\pm0.03$ between the signals and $0.84\pm0.05$ between the idlers. Within the geometrical model, the combined evidence favours an intermodal fundamental–higher-order process for the former band and an intramodal higher-order process for the latter. The attribution assumes nearly identical output-fibre polarisation transformations at nearby wavelengths. Predicted wavelengths deviate by up to $4.5\%$, and resolving the final assignment ambiguity requires assumptions about correlated model errors that lack systematic sensitivity analysis. An extension predicts simultaneous processes near a $790.2$ nm pump that could generate polarisation entanglement, not demonstrated experimentally. Idealised nonlinear-amplitude imbalance limits concurrence to $0.60$ and Bell-state fidelity to $0.80$; unresolved hybrid modes and unquantified spectral overlap impose further limitations.
Central claim may not hold: The rejection of assignment B is not shown to survive geometrical and nonlinear modelling uncertainty, because no sensitivity analysis establishes that its two phase-matching curves shift together. The candidate search excludes processes 23 and 49 merely because additional phase-matched peaks were not observed, without establishing their detectability, leaving alternatives to the claimed process attribution insufficiently excluded.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
- Comments
- 19 pages, 8 figures, 4 tables