Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2609.38354

Time-Integrated Leakage as a Dynamical Benchmark for Multi-Mode Superconducting-Qubit Reset

Sushant Sharma, Aswath Babu H

quant-phSubmitted Sep 29, 2026• Announced Oct 1, 2026• 0 citations
arXivHTMLPDF

Abstract

Reset performance in superconducting qubits is often summarized by the population that remains at the end of the pulse. This is an important number, but it does not describe what happens during the reset itself. A protocol may reach a small final residual while keeping the qubit in a leakage state for a comparatively long part of the trajectory. In this work, we therefore use time-integrated leakage, together with the usual endpoint population, to study a multi-mode dissipative reset model under flux-frequency control. We examine finite thermal occupation, parameter sweeps, frequency disorder, an auxiliary-chain ablation, and a literature-based rate benchmark. At the representative ablation point, adding the auxiliary chain reduces Lf from 8.56 to 0.78 ns and shifts the sustained Pf less-than- 10-2 crossing from 39.5 to 9.8 ns. Interestingly, the configuration without the chain still reaches the smaller long-time residual. The two metrics can therefore favor different reset configurations. For the same 300 ns analysis window, an effective rate model built from the f-ket and e-ket decay rates reported by Zhou et al. gives Lf is 108.0 ns, while the complete simulated configuration gives 0.783 ns. We use this only as a kinetic reference and not as a reproduction of the experiment. In the wider set of simulations, thermal occupation is the main source of degradation, while the frequency disorder considered here has a much weaker effect. The results suggest that time-integrated leakage is a useful quantity to report alongside endpoint residuals, especially when reset is part of repeated quantum-error-correction cycles.

AI Summary

The paper asks whether endpoint leakage adequately characterizes superconducting-qubit reset, and studies the complementary metric $\mathcal{L}_f=\int_0^{t_f}P_f(t)\,dt$. It numerically models a three-level transmon coupled to an auxiliary-mode chain and a lossy resonator, with flux-frequency modulation and phenomenological Lindblad dissipation. QuTiP simulations start in $|f\rangle$ and span 300 ns, examining thermal occupation, loss, chain size, frequency disorder, and component ablations. At a representative operating point, enabling the five-mode auxiliary chain reduces $\mathcal{L}_f$ from 8.561 to 0.783 ns and advances the sustained $P_f<10^{-2}$ crossing from 39.53 to 9.76 ns, while increasing the final leakage from $1.52\times10^{-8}$ to $6.55\times10^{-4}$. Thus endpoint and trajectory metrics rank these configurations differently. Varying modulation amplitude from 0 to $1\,\mathrm{ns}^{-1}$ changes integrated leakage by less than 0.6%. Thermal occupation dominates degradation in the sampled parameter space; auxiliary-frequency disorder up to $\pm60$ MHz has comparatively weak effects. A separate exponential-decay benchmark using a published 117 ns leakage-decay timescale gives $\mathcal{L}_f=107.99$ ns over the same window; this is explicitly not a device-level performance comparison. Stated limitations include two-level truncation of auxiliary modes without local-dimension convergence tests, uncalibrated phenomenological dissipation, idealized flux control, absent crosstalk and parasitic modes, and disorder restricted to frequencies. The ablation covers one operating point, and the proposed relevance to QEC is illustrated by a conditional-error-rate model rather than demonstrated in multi-qubit simulations.

Some signs of AI-generated textIncrementalSmall numerics onlyStrong assumptionsUnclear novelty

Error found: The thermal-noise table reports that only 63% of runs reached 1% leakage even though its maximum final leakage is 0.513%, implying that every run reached that threshold. The model specification omits explicit collapse operators and the physical meaning of the ablation's 'high-loss setting 8', so the central numerical comparison cannot be independently reproduced from the supplied text.

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Comments
7 pages, 9 figures

Related papers

Implementing rapid reset of superconducting qubits with on-chip dissipation

Feiyu Li, Yang Liu, Zhen Yang +10 more

Rapid and high-fidelity qubit reset is essential for quantum state initialization and quantum error correction. Conventional reset protocols for superconducting qubits often rely on dissipative elements connected to external circuitry, exposing qubits to thermal noise from higher-temperature environments. Here, we experimentally demonstrate a scalable approach to qubit reset and leakage removal over multiple transmon qubits using dedicated dissipation units comprising resonators coupled to on-chip resistive loads. This architecture provides Purcell protection while isolating the qubits from warmer external circuitry. We achieve a median reset time constant of approximately 48 ns for the $|g\rangle-|e\rangle$ transition, with an effective bath temperature of 30 mK. A 400-ns reset pulse yields residual excited-state populations of $0.29\%$ and $0.67\%$ for qubits initialized in $|g\rangle$ and $|e\rangle$, respectively. We further demonstrate efficient leakage removal from the $|f\rangle$ state, reducing its residual population to $0.51\%$. These results establish a simple, reproducible, and easy-to-integrate approach to dissipation engineering in superconducting quantum processors.

arXiv:2611.14391•Nov 10, 2026•0 citations

Low-leakage superconducting-qubit measurement with sub-100-ns total duration

Peter A. Spring, Adrian L. Hesse, Shiyu Wang +2 more

Fast, accurate, and low-leakage qubit measurement is a key requirement for quantum error correction. Here, we demonstrate measurement of a superconducting transmon qubit with a total duration of 97(1) ns, defined as the time from the start of the measurement pulse until the measurement-induced error on a subsequent $π$-pulse operation falls below $10^{-4}$. By combining a large state-averaged resonator decay rate of $κ_\mathrm{eff}/2π$ = 30.8 MHz with a dispersive shift close to the optimal SNR-per-photon condition, we achieve an assignment error of 0.17(1)% using a 58-ns measurement pulse, with residual readout photons depleting passively in tens of nanoseconds without an active depletion pulse. Using a repeated-measurement sequence together with a leakage-sensitive measurement, we benchmark the measurement-induced state transitions, finding a per-measurement leakage rate of $2.7(2) \times 10^{-5}$, only twice the background rate and two orders of magnitude below the measurement-induced relaxation rate, which dominates the assignment error. Floquet simulations indicate that the multiphoton resonances present at the operating point are weakly coupled and traversed diabatically, without causing leakage. These results demonstrate that a large resonator decay rate, combined with a dispersive shift close to the optimal SNR-per-photon condition, can enable fast, high-fidelity, low-leakage dispersive readout at small qubit-resonator detuning.

quant-pharXiv:2608.25484•Aug 27, 2026•1 citation

Multimode Purcell filter for superconducting-qubit reset and readout with intrinsic Purcell protection

Xu-Yang Gu, Da’er Feng, Zhen-Yu Peng +17 more

Efficient qubit reset and leakage reduction are essential for scalable superconducting quantum computing, particularly in the context of quantum error correction. However, such operations often require additional on-chip components. Here, we propose and experimentally demonstrate a hardware-efficient approach to qubit reset and readout using a multi-mode Purcell filter in a superconducting quantum circuit. We exploit the inherent multi-mode structure of a coplanar waveguide resonator, using its fundamental and second-order modes for qubit reset and readout, respectively, thereby avoiding additional components. Implemented in a flip-chip architecture, our device achieves unconditional reset with residual excitation below 1\% in 220 ns, and a leakage reduction unit that selectively resets the second excited state within 62 ns with a residual $|f\rangle$ population of 6.1\%, accounting for the readout error. Despite the qubits being directly coupled to the filter in our configuration, the measured relaxation times are not degraded owing to intrinsic Purcell protection provided by an auxiliary mode. To our knowledge, this is the first experimental trial that exploits different-order modes of a microwave resonator for distinct qubit operations, representing a new direction toward scalable, hardware-efficient quantum processor design.

arXiv:2507.04676•Physical Review Applied•Mar 3, 2026•3 citations

Fast unconditional reset and leakage reduction of a tunable superconducting qubit via an engineered dissipative bath

Gihwan Kim, Andreas Butler, Vinicius S. Ferreira +4 more

Rapid and accurate initialization of qubits, known as reset, is a crucial building block for various tasks in quantum information processing, such as quantum error correction and estimation of the statistics of noisy quantum devices with many qubits. We demonstrate unconditional reset of a frequency-tunable transmon qubit that simultaneously resets multiple excited states using a metamaterial waveguide engineered to provide a cold bath over a wide spectral range, while providing strong protection against Purcell decay of the qubit. We report a reset error below 0.13% (0.16%) when prepared in the first (second) excited state of the transmon within 88 ns. In addition, through the sharp roll-off in the density of states of the metamaterial waveguide, we implement a leakage-reduction unit that selectively resets the transmon’s second excited state to 0.285(3)% residual population within 44 ns while acting trivially in the computational subspace as an identity operation that preserves encoded information with an infidelity of 0.72(1)%.

arXiv:2411.02950•Physical Review Applied•Jun 5, 2025•10 citations

Fast Reset Protocol for Superconducting Transmon Qubits

Wei-Ping Yuan, Zhicheng He, Sai Li +1 more

For larger-scale quantum information processing, qubit reset plays an important role, as the coherent times for qubits are limited. However, previous schemes require either long reset times or a complex pulse calibration technique, leading to low efficiency in qubit reset. Here, we propose a fast and simple reset protocol for superconducting transmon qubits based on the coupler-coupled qubits architecture. In this setup, a mixing pulse is used to transfer the qubit excitation to the combined excitation of a low-qulity coupler and readout resonator, which will quickly decay to their respectively ground states, leading to efficient qubit reset to the ground state. Our numerical results show that the residual population of the qubit’s excited state can be suppressed to 0.04% within 28 ns; the reset time will be 283 ns if photon depletion of the readout resonator is required. Thus, our protocol provides a promising way for the high-efficiency superconducting qubit reset.

Applied Sciences•Jan 6, 2023•0 citations

Optimizing resetting of superconducting qubits

Ciro Micheletti Diniz, Rogério J. de Assis, N. G. de Almeida +1 more

Many quantum algorithms demand a large number of repetitions to obtain reliable statistical results. Thus, at each repetition it is necessary to reset the qubits efficiently and precisely in the shortest possible time, so that quantum computers actually have advantages over classical ones. In this work, we perform a detailed analysis of three different models for information resetting in superconducting qubits. Our experimental setup consists of a main qubit coupled to different auxiliary dissipative systems, which are employed in order to perform the erasure of the information of the main qubit. Our analysis shows that it is not enough to increase the coupling and the dissipation rate associated with the auxiliary systems to decrease the resetting time of the main qubit, a fact that motivates us to find the optimal set of parameters for each studied approach, allowing a significant decrease in the reset time of the three models analyzed.

arXiv:2304.00684•Physical Review A•Nov 13, 2023•5 citations
Reset performance in superconducting qubits is often summarized by the population that remains at the end of the pulse. This is an important number, but it does not describe what happens during the reset itself. A protocol may reach a small final residual while keeping the qubit in a leakage state for a comparatively long part of the trajectory. In this work, we therefore use time-integrated leakage, together with the usual endpoint population, to study a multi-mode dissipative reset model under flux-frequency control. We examine finite thermal occupation, parameter sweeps, frequency disorder, an auxiliary-chain ablation, and a literature-based rate benchmark. At the representative ablation point, adding the auxiliary chain reduces Lf from 8.56 to 0.78 ns and shifts the sustained Pf less-than- 10-2 crossing from 39.5 to 9.8 ns. Interestingly, the configuration without the chain still reaches the smaller long-time residual. The two metrics can therefore favor different reset configurations. For the same 300 ns analysis window, an effective rate model built from the f-ket and e-ket decay rates reported by Zhou et al. gives Lf is 108.0 ns, while the complete simulated configuration gives 0.783 ns. We use this only as a kinetic reference and not as a reproduction of the experiment. In the wider set of simulations, thermal occupation is the main source of degradation, while the frequency disorder considered here has a much weaker effect. The results suggest that time-integrated leakage is a useful quantity to report alongside endpoint residuals, especially when reset is part of repeated quantum-error-correction cycles.
The paper asks whether endpoint leakage adequately characterizes superconducting-qubit reset, and studies the complementary metric Lf=∫0tfPf(t) dt\mathcal{L}_f=\int_0^{t_f}P_f(t)\,dtLf​=∫0tf​​Pf​(t)dt. It numerically models a three-level transmon coupled to an auxiliary-mode chain and a lossy resonator, with flux-frequency modulation and phenomenological Lindblad dissipation. QuTiP simulations start in ∣f⟩|f\rangle∣f⟩ and span 300 ns, examining thermal occupation, loss, chain size, frequency disorder, and component ablations.
At a representative operating point, enabling the five-mode auxiliary chain reduces Lf\mathcal{L}_fLf​ from 8.561 to 0.783 ns and advances the sustained Pf<10−2P_f<10^{-2}Pf​<10−2 crossing from 39.53 to 9.76 ns, while increasing the final leakage from 1.52×10−81.52\times10^{-8}1.52×10−8 to 6.55×10−46.55\times10^{-4}6.55×10−4. Thus endpoint and trajectory metrics rank these configurations differently. Varying modulation amplitude from 0 to 1 ns−11\,\mathrm{ns}^{-1}1ns−1 changes integrated leakage by less than 0.6%. Thermal occupation dominates degradation in the sampled parameter space; auxiliary-frequency disorder up to ±60\pm60±60 MHz has comparatively weak effects. A separate exponential-decay benchmark using a published 117 ns leakage-decay timescale gives Lf=107.99\mathcal{L}_f=107.99Lf​=107.99 ns over the same window; this is explicitly not a device-level performance comparison.
Stated limitations include two-level truncation of auxiliary modes without local-dimension convergence tests, uncalibrated phenomenological dissipation, idealized flux control, absent crosstalk and parasitic modes, and disorder restricted to frequencies. The ablation covers one operating point, and the proposed relevance to QEC is illustrated by a conditional-error-rate model rather than demonstrated in multi-qubit simulations.
Rapid and high-fidelity qubit reset is essential for quantum state initialization and quantum error correction. Conventional reset protocols for superconducting qubits often rely on dissipative elements connected to external circuitry, exposing qubits to thermal noise from higher-temperature environments. Here, we experimentally demonstrate a scalable approach to qubit reset and leakage removal over multiple transmon qubits using dedicated dissipation units comprising resonators coupled to on-chip resistive loads. This architecture provides Purcell protection while isolating the qubits from warmer external circuitry. We achieve a median reset time constant of approximately 48 ns for the ∣g⟩−∣e⟩|g\rangle-|e\rangle∣g⟩−∣e⟩ transition, with an effective bath temperature of 30 mK. A 400-ns reset pulse yields residual excited-state populations of 0.29%0.29\%0.29% and 0.67%0.67\%0.67% for qubits initialized in ∣g⟩|g\rangle∣g⟩ and ∣e⟩|e\rangle∣e⟩, respectively. We further demonstrate efficient leakage removal from the ∣f⟩|f\rangle∣f⟩ state, reducing its residual population to 0.51%0.51\%0.51%. These results establish a simple, reproducible, and easy-to-integrate approach to dissipation engineering in superconducting quantum processors.
Fast, accurate, and low-leakage qubit measurement is a key requirement for quantum error correction. Here, we demonstrate measurement of a superconducting transmon qubit with a total duration of 97(1) ns, defined as the time from the start of the measurement pulse until the measurement-induced error on a subsequent πππ-pulse operation falls below 10−410^{-4}10−4. By combining a large state-averaged resonator decay rate of κeff/2πκ_\mathrm{eff}/2πκeff​/2π = 30.8 MHz with a dispersive shift close to the optimal SNR-per-photon condition, we achieve an assignment error of 0.17(1)% using a 58-ns measurement pulse, with residual readout photons depleting passively in tens of nanoseconds without an active depletion pulse. Using a repeated-measurement sequence together with a leakage-sensitive measurement, we benchmark the measurement-induced state transitions, finding a per-measurement leakage rate of 2.7(2)×10−52.7(2) \times 10^{-5}2.7(2)×10−5, only twice the background rate and two orders of magnitude below the measurement-induced relaxation rate, which dominates the assignment error. Floquet simulations indicate that the multiphoton resonances present at the operating point are weakly coupled and traversed diabatically, without causing leakage. These results demonstrate that a large resonator decay rate, combined with a dispersive shift close to the optimal SNR-per-photon condition, can enable fast, high-fidelity, low-leakage dispersive readout at small qubit-resonator detuning.
Efficient qubit reset and leakage reduction are essential for scalable superconducting quantum computing, particularly in the context of quantum error correction. However, such operations often require additional on-chip components. Here, we propose and experimentally demonstrate a hardware-efficient approach to qubit reset and readout using a multi-mode Purcell filter in a superconducting quantum circuit. We exploit the inherent multi-mode structure of a coplanar waveguide resonator, using its fundamental and second-order modes for qubit reset and readout, respectively, thereby avoiding additional components. Implemented in a flip-chip architecture, our device achieves unconditional reset with residual excitation below 1\% in 220 ns, and a leakage reduction unit that selectively resets the second excited state within 62 ns with a residual ∣f⟩|f\rangle∣f⟩ population of 6.1\%, accounting for the readout error. Despite the qubits being directly coupled to the filter in our configuration, the measured relaxation times are not degraded owing to intrinsic Purcell protection provided by an auxiliary mode. To our knowledge, this is the first experimental trial that exploits different-order modes of a microwave resonator for distinct qubit operations, representing a new direction toward scalable, hardware-efficient quantum processor design.
Rapid and accurate initialization of qubits, known as reset, is a crucial building block for various tasks in quantum information processing, such as quantum error correction and estimation of the statistics of noisy quantum devices with many qubits. We demonstrate unconditional reset of a frequency-tunable transmon qubit that simultaneously resets multiple excited states using a metamaterial waveguide engineered to provide a cold bath over a wide spectral range, while providing strong protection against Purcell decay of the qubit. We report a reset error below 0.13% (0.16%) when prepared in the first (second) excited state of the transmon within 88 ns. In addition, through the sharp roll-off in the density of states of the metamaterial waveguide, we implement a leakage-reduction unit that selectively resets the transmon’s second excited state to 0.285(3)% residual population within 44 ns while acting trivially in the computational subspace as an identity operation that preserves encoded information with an infidelity of 0.72(1)%.
For larger-scale quantum information processing, qubit reset plays an important role, as the coherent times for qubits are limited. However, previous schemes require either long reset times or a complex pulse calibration technique, leading to low efficiency in qubit reset. Here, we propose a fast and simple reset protocol for superconducting transmon qubits based on the coupler-coupled qubits architecture. In this setup, a mixing pulse is used to transfer the qubit excitation to the combined excitation of a low-qulity coupler and readout resonator, which will quickly decay to their respectively ground states, leading to efficient qubit reset to the ground state. Our numerical results show that the residual population of the qubit’s excited state can be suppressed to 0.04% within 28 ns; the reset time will be 283 ns if photon depletion of the readout resonator is required. Thus, our protocol provides a promising way for the high-efficiency superconducting qubit reset.
Many quantum algorithms demand a large number of repetitions to obtain reliable statistical results. Thus, at each repetition it is necessary to reset the qubits efficiently and precisely in the shortest possible time, so that quantum computers actually have advantages over classical ones. In this work, we perform a detailed analysis of three different models for information resetting in superconducting qubits. Our experimental setup consists of a main qubit coupled to different auxiliary dissipative systems, which are employed in order to perform the erasure of the information of the main qubit. Our analysis shows that it is not enough to increase the coupling and the dissipation rate associated with the auxiliary systems to decrease the resetting time of the main qubit, a fact that motivates us to find the optimal set of parameters for each studied approach, allowing a significant decrease in the reset time of the three models analyzed.