arXiv:2609.38127
Multimode radiation pressure actuation of a mechanical resonator using a spatial mode sorter
Morgan E. Choi, Daniel Allepuz-Requena, Diego Torres-Barajas, Neshat Sadafi, Dalziel J. Wilson
Abstract
Multimode optomechanical scattering is ubiquitous in free-space imaging protocols, but its radiation pressure counterpart is challenging to detect with extended objects. Here we demonstrate radiation pressure actuation of a nanomechanical membrane using dynamically structured light from a spatial mode demultiplexer (SPADE). Using single- and two-mode illumination, we directly image the position-dependent intermodal coupling between Hermite-Gauss (HG) modes as mediated by the membrane's motion. As an application, we use multimode radiation pressure feedback to simultaneously cool two nearly degenerate membrane modes. Our results are applicable to diverse mechanical systems and serve as a stepping stone to SPADE-based quantum optomechanics.
AI Summary
The paper asks whether spatial-mode-dependent optomechanical scattering can be used reciprocally to actuate an extended mechanical object and control nearly degenerate mechanical modes. A multi-plane light converter combines Hermite–Gauss (HG) modes, with phase modulation between inputs generating time-dependent radiation-pressure patterns at fixed total optical power. Experiments use a $2.5\,\mathrm{mm}$ square, $90\,\mathrm{nm}$ thick silicon-nitride membrane with mechanical quality factors $Q\sim10^6$. A $1550\,\mathrm{nm}$ actuation beam, typically $3\,\mathrm{mW}$ with a $60\,\mu\mathrm{m}$ waist, is rastered across the membrane; an independent optical lever measures its driven displacement. Single-mode and two-mode measurements map squared coupling coefficients $|\langle u_{mn}|\phi_{ij}|u_{kl}\rangle|^2$ for four mechanical modes. Combining HG$_{00}$ with HG$_{10}$, HG$_{01}$, or HG$_{11}$ produces maps consistent with squared first or mixed spatial derivatives of the mechanical modeshape, as predicted by overlap-integral calculations in the small-spot limit. Spatially selective actuation is then used for feedback cooling of two membrane modes separated by approximately $30\,\mathrm{Hz}$. Choosing a beam position with low cross-coupling enables selective cooling through either optical-mode pair and simultaneous cooling through both. The reported cooling/damping is limited to approximately $10\,\mathrm{dB}$ by electronic gain. The experiment demonstrates the actuator component rather than quantum-limited multimode control or ground-state cooling. Quantum-control applications require integration with sufficiently efficient multimode readout. Stated scaling challenges include preserving coupling efficiency and suppressing crosstalk as the number of spatial modes increases; resonance-frequency drift also constrains the coupling-map measurements.
Error found: Equation (5)'s η² drive-power dependence is a small-modulation approximation; at the Figure 3 modulation depth η ≈ π/2, the exact fundamental-frequency power is approximately 0.521 times that prediction, without changing the predicted spatial-map shapes. For Figure 3(d), the caption gives an illumination intensity ratio α² ≈ 0.5, while the body gives α ≈ 0.5, corresponding to α² ≈ 0.25.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.