Hole spin qubits based on semiconductor quantum dots are promising for building future large-scale quantum computers owing to their all-electrical manipulation. However, abundant physical mechanisms of valence band holes lead to anisotropic qubit properties. There is an opportunity to prolong the coherence time and achieve high-fidelity qubit manipulations. Here, we report a single-hole spin qubit in a planar germanium quantum dot and investigate its anisotropic susceptibility to charge noise under an in-plane magnetic field. By correlating the longitudinal spin-electric susceptibility with qubit coherence and control performance, we identify an optimal operating point where the sensitivity to charge noise is minimized. We find that optimizing the magnetic-field orientation reduces the spin-electric susceptibility, resulting in a five-fold enhancement of the Hahn-echo coherence time and a nearly tenfold suppression of control infidelity. At the optimal operating point, gate set tomography demonstrates the maximum gate fidelity of 99.82 %. Our finding enhances the prospects of hole spin qubits for scalable quantum information processing.
AI Summary
The paper investigates how in-plane magnetic-field orientation affects charge-noise sensitivity, coherence, and single-qubit control in planar germanium hole-spin qubits. Two single-hole dots are characterized using spin-resonance spectroscopy, gate-voltage-dependent frequency shifts, Ramsey and Hahn-echo measurements, and gate set tomography (GST). The longitudinal spin–electric susceptibility is measured for both plunger gates and compared with coherence and gate errors across field orientations.
The effective in-plane $g$ factors range from 0.19–0.30 for Q1 and 0.19–0.41 for Q2. Orientations with smaller measured spin–electric susceptibility coincide with longer Hahn-echo coherence: $T_2^{\rm Echo}$ increases from approximately 0.5 to 2.2 $\mu$s for Q1 and from 0.4 to 0.8 $\mu$s for Q2. Ramsey dephasing remains approximately orientation-independent, with a representative $T_2^*=170$ ns. GST finds roughly tenfold and fivefold reductions in driven-gate infidelity for Q1 and Q2, respectively, between unfavorable and optimal orientations. The highest reported fidelities are 99.82% for $X/2$ and 99.78% for $Y/2$.
Noise spectroscopy is consistent with an approximately $1/f^{0.92}$ spectrum. A model using uncorrelated voltage noise on the two plunger gates reproduces Ramsey dephasing but not the magnitude or pronounced angular dependence of Hahn-echo coherence. The stated limitation is that barrier-gate susceptibilities could not be measured with the available pulse connections, leaving their noise contributions unmodeled. The demonstrated optimal orientations minimize measured susceptibility rather than establish complete first-order insensitivity to all electrical noise sources.
Some signs of AI-generated textIncrementalOverclaimsUnclear writing
Error found: The susceptibility-based model explicitly fails to reproduce the observed Hahn-echo anisotropy quantitatively, leaving the claimed causal explanation supported by correlations rather than a successful quantitative account.
The paper does not explain how fixed-field susceptibility measurements are matched to coherence and control measurements performed at fixed resonance frequency while rotating the magnetic field.
Appendix B's printed Hahn-echo rate formula is dimensionally inconsistent: the stated noise spectrum requires an f0 exponent of approximately 0.476, not 1/0.907.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
Hole spin qubits based on semiconductor quantum dots are promising for building future large-scale quantum computers owing to their all-electrical manipulation. However, abundant physical mechanisms of valence band holes lead to anisotropic qubit properties. There is an opportunity to prolong the coherence time and achieve high-fidelity qubit manipulations. Here, we report a single-hole spin qubit in a planar germanium quantum dot and investigate its anisotropic susceptibility to charge noise under an in-plane magnetic field. By correlating the longitudinal spin-electric susceptibility with qubit coherence and control performance, we identify an optimal operating point where the sensitivity to charge noise is minimized. We find that optimizing the magnetic-field orientation reduces the spin-electric susceptibility, resulting in a five-fold enhancement of the Hahn-echo coherence time and a nearly tenfold suppression of control infidelity. At the optimal operating point, gate set tomography demonstrates the maximum gate fidelity of 99.82 %. Our finding enhances the prospects of hole spin qubits for scalable quantum information processing.
The paper investigates how in-plane magnetic-field orientation affects charge-noise sensitivity, coherence, and single-qubit control in planar germanium hole-spin qubits. Two single-hole dots are characterized using spin-resonance spectroscopy, gate-voltage-dependent frequency shifts, Ramsey and Hahn-echo measurements, and gate set tomography (GST). The longitudinal spin–electric susceptibility is measured for both plunger gates and compared with coherence and gate errors across field orientations.
The effective in-plane g factors range from 0.19–0.30 for Q1 and 0.19–0.41 for Q2. Orientations with smaller measured spin–electric susceptibility coincide with longer Hahn-echo coherence: T2Echo increases from approximately 0.5 to 2.2 μs for Q1 and from 0.4 to 0.8 μs for Q2. Ramsey dephasing remains approximately orientation-independent, with a representative T2∗=170 ns. GST finds roughly tenfold and fivefold reductions in driven-gate infidelity for Q1 and Q2, respectively, between unfavorable and optimal orientations. The highest reported fidelities are 99.82% for X/2 and 99.78% for Y/2.
Noise spectroscopy is consistent with an approximately 1/f0.92 spectrum. A model using uncorrelated voltage noise on the two plunger gates reproduces Ramsey dephasing but not the magnitude or pronounced angular dependence of Hahn-echo coherence. The stated limitation is that barrier-gate susceptibilities could not be measured with the available pulse connections, leaving their noise contributions unmodeled. The demonstrated optimal orientations minimize measured susceptibility rather than establish complete first-order insensitivity to all electrical noise sources.
Hole spin qubits in semiconductor quantum dots (QDs) enable high-fidelity all-electric control, but conventional electric dipole spin resonance (EDSR) can require substantial rf drive power at the low magnetic fields that are favorable for qubit coherence and readout. In planar Ge hole spin qubits, this can reach -27 dBm at the device, posing challenges for scalable architectures due to heating and crosstalk. Here, we demonstrate a flopping-mode (FM) qubit in Ge, where a single spin is delocalized in a double QD, combining first-order protection against charge noise with exceptionally efficient electric driving. By mapping out coherence sweet-spots as a function of magnetic field orientation we achieve T2∗=1.4μs, T2Hahn=11.5μs, T2φ,CPMG32=130μs, and T1=226μs, and a single-qubit gate fidelity of up to 99.76% for a gate time tXπ=88 ns. Importantly, these results are obtained at a nearly in-plane magnetic field of 5 mT using only -52 dBm drive power at the device. We further find that qubit relaxation in this regime is consistent with a two-photon Orbach process, providing a route for further optimization. Our results demonstrate that FM-EDSR supports ultra-low-power, high-fidelity single-qubit operations, improvements that could benefit scalable hole-spin-based architectures and hybrid spin-photon interfaces.
Achieving high-fidelity and robust qubit manipulations is a crucial requirement for realizing faulttolerant quantum computation. Here, we demonstrate a single-hole spin qubit in a germanium quantum dot and characterize its control fidelity using gate set tomography. The maximum control fidelities reach 97.48%, 99.81%, 99.88% for the I, X/2 and Y /2 gate, respectively. These results reveal that off-resonance noise during consecutive I gates in gate set tomography sequences severely limits qubit performance. Therefore, we introduce geometric quantum computation to realize noiseresilient qubit manipulation. The geometric gate control fidelities remain above 99% across a wide range of Rabi frequencies. The maximum fidelity surpasses 99.9%. Furthermore, the fidelities of geometric X/2 and Y /2 (I) gates exceed 99% even when detuning the microwave frequency by +-2.5 MHz (+-1.2 MHz), highlighting the noise-resilient feature. These results demonstrate that geometric quantum computation is a potential method for achieving high-fidelity qubit manipulation reproducibly in semiconductor quantum computation.
Hole spin qubits are frontrunner platforms for scalable quantum computers because of their large spin-orbit interaction that enables ultrafast all-electric qubit control at low power. The fastest spin qubits to date are defined in long quantum dots with two tight confinement directions, when the driving field is aligned to the smooth direction. However, in these systems the lifetime of the qubit is strongly limited by charge noise, a major issue in hole qubits. We propose here a different, scalable qubit design, compatible with planar CMOS technology, where the hole is confined in a curved germanium quantum well surrounded by silicon. This design takes full advantage of the strong spin-orbit interaction of holes, and at the same time suppresses charge noise in a wide range of configurations, enabling highly coherent, ultrafast qubit gates. While here we focus on a Si/Ge/Si curved quantum well, our design is also applicable to different semiconductors. These devices allow for ultrafast operations even in short quantum dots by a transversal electric field. This additional driving mechanism relaxes the demanding design constraints, and offers a way to reliably interface spin qubits in a single quantum dot to microwave photons. By considering state-of-the-art high-impedance resonators and realistic qubit designs, we estimate interaction strengths of a few hundreds of megahertz, largely exceeding the decay rate of spins and photons. Reaching such a strong coupling regime in hole spin qubits will be a significant step towards high-fidelity entangling operations between distant qubits, as well as fast single-shot readout, and could pave the way towards the implementation of a large-scale semiconducting quantum processor.
Hole spin qubits hosted in Germanium quantum dots are promising candidates for scalable quantum computing. The strong spin-orbit interaction can enable fast and all-electrical quantum control. Furthermore, the platform can implement universal quantum control using only baseband signals, which may mitigate the impact of crosstalk and microwave-induced heating. At the same time, spin-orbit interaction gives rise to an anisotropic exchange interaction, whose potential for implementing two-qubit gates has remained largely unexplored. However, the current performance of operating a hole-based quantum computer is mostly limited by dephasing due to low-frequency charge noise. In this work, we propose a novel two-qubit gate protocol for Germanium hole spin qubits operated in the gapless regime. This gate protocol exploits the anisotropic exchange interaction between neighboring spins and utilizes a composite pulse scheme implemented solely through electrical baseband signals. Using this approach, we predict high-fidelity two-qubit controlled-Z operations that can suppress exchange-energy fluctuations, offering a pathway toward fault-tolerant semiconductor quantum processors.
Spin qubits in semiconductor quantum dots constitute one of the leading platforms for quantum information processing, combining long coherence times, high-fidelity gate operations, and compatibility with semiconductor industry technologies. In particular, holes confined in planar Ge/SiGe heterostructures have recently emerged as promising qubit candidates owing to their low effective mass, high mobility, low percolation density, absence of valley states, and strong spin-orbit interaction, which enables fast all-electrical spin control. At the same time, spin-orbit interaction also gives rise to a highly anisotropic and electrically tunable gyromagnetic response. Understanding and controlling this response is therefore essential for high-fidelity single- and multi-qubit operations. The realization of scalable quantum processors also requires efficient qubit readout and long-range connectivity. Circuit quantum electrodynamics (cQED), based on the coupling between artificial atoms and microwave photons confined in superconducting resonators, provides a natural framework to address these challenges. However, the implementation of hybrid semiconductor-superconductor devices in planar Ge has so far been hindered by large microwave losses originating from the heterostructure. In this thesis, we demonstrate, for the first time in planar Ge, strong coupling between a hole charge qubit in a double quantum dot and a high-impedance microwave resonator, reaching a cooperativity of C â 100. In addition, we leverage the frequency tunability of the resonator to perform detailed spectroscopy of a multi-level energy spectrum of low-lying states arising from strong Coulomb-correlation effects. To further improve the quality of the hole-photon interface, we investigate the source of microwave losses in different Ge/SiGe heterostructures, identifying defects at the lattice-mismatched Si/Ge interface as the dominant source of resonator losses in reverse-graded heterostructures. To mitigate this limitation, a deep tapered-etching approach is introduced, enabling the fabrication of superconducting resonators directly on etched heterostructures. This method yields internal quality factors exceeding Qint > 10 000 for high-impedance Josephson junction array resonators and Qint > 100 000 for 50 â Nb resonators. Finally, this thesis explores the spin properties of multi-hole quantum dots beyond the conventional single-orbital picture. By reconstructing and electrically tuning the g tensors of holes confined in different orbital states, we show that confinement can substantially modify both their magnitude and orientation. These results open new opportunities for engineering qubit properties through orbital occupation. Furthermore, highly coherent singlet-triplet oscillations are demonstrated in the seven-hole regime, yielding a quality factor of approximately 330 at in-plane magnetic fields as low as 2.5 mT. Together, these results establish a foundation for high-fidelity hole-spin-qubit operation based on g-tensor engineering and for the integration of planar Ge quantum dots with superconducting quantum circuits.
Hole spin qubits in planar germanium heterostructures are frontrunners for scalable semiconductor quantum computing. However, their current performance is mostly limited by large dot-to-dot variability that leads to uncontrolled qubit energies and random tilts in the spin quantization axis. Here, we propose a systematic and local method to engineer the spin qubit response by imprinting a controlled anisotropy in the quantum dot confinement, enabling on-demand electric g-tensor control. In particular, we find that both the quantum-dot size and asymmetry allow electrical tuning of the g-tensor and significantly suppress magnitude and angular variability of the spin response for selected magnetic field directions. We confirm this behavior by analyzing single-disorder realizations and statistical ensembles in state-of-the-art strained and unstrained germanium channels, showing that the latter provides an optimal path for g-tensor engineering. Our results provide practical design principles for on-demand control of the spin response and mitigating variability, paving the way towards large-scale germanium-based quantum computers.