arXiv:2609.31865
Systematic errors from scalar slowing-down models in transient SERF magnetometry
Marek Kopciuch, Harini Raghavan, Morgan W. Mitchell
Abstract
Reduced Bloch models of spin-exchange-relaxation-free (SERF) magnetometers commonly describe the coupled electron--nuclear spin dynamics using a single nuclear slowing-down factor. We show that this scalar description becomes inaccurate when the polarization magnitude changes appreciably. We derive an effective Bloch equation with separate longitudinal and transverse slowing-down factors, $q_\parallel(P)$ and $q_\perp(P)$, governing changes in polarization magnitude and direction. For $^{87}\mathrm{Rb}$ under representative SERF conditions and undergoing free-induction decay (FID), comparison with master-equation simulations shows that the dynamic scalar model produces a magnetic-field estimation bias of up to $4.2\%$ at high initial polarization, while fixing the slowing-down factor at a reference value increases the error to $10.1\%$. Lowering the polarization suppresses this bias but also reduces the magnetic-field information contained in the FID signal. We further show that the anisotropic response modifies noncollinear optical pumping and introduces an additional nonlinear contribution to the harmonic response under periodic driving. The resulting model retains the simplicity of a three-component Bloch description while improving the quantitative accuracy of transient and driven SERF magnetometry.
AI Summary
Scalar nuclear slowing-down factors are commonly used in reduced Bloch models of SERF magnetometers. This paper asks how that approximation affects transient magnetic-field inference when the polarization magnitude changes appreciably. Starting from the electron–nuclear master equation and imposing spin-temperature closure, it derives separate longitudinal and transverse factors, $q_\parallel(P)=2\,dF/dP$ and $q_\perp(P)=2F(P)/P$. For $^{87}\mathrm{Rb}$, both equal 6 at zero polarization but approach 2 and 4, respectively, at full polarization. The resulting three-component Bloch equation assigns magnitude relaxation and directional precession different slowing-down rates. Comparisons with master-equation simulations show that incorrect magnitude dynamics alter the polarization-dependent precession rate and accumulated phase. For the simulated pump-free transients at $190\,^\circ\mathrm{C}$ and a transverse field of $5\,\mathrm{nT}$, high-polarization field-estimation errors reach approximately $4.2\%$ with a dynamic scalar factor and $10.1\%$ with a fixed factor of 6. Including anisotropy and the nuclear Zeeman correction reduces the residual to approximately $0.06$–$0.07\%$. Reducing initial polarization to about 0.3 suppresses scalar-model bias but retains only about $20\%$ of the maximum Fisher information under the assumed additive, independent Gaussian polarization-noise model. Closed-form amplitude–phase relations isolate the anisotropic correction; analysis of noncollinear pumping identifies an additional longitudinal harmonic-response channel. The quantitative biases depend on the specified preparation, analysis interval, and measurement model. Validation is numerical rather than experimental. The closure assumes rapid spin exchange, and remaining discrepancies are attributed to finite-rate departures from spin temperature. An overlapping preprint independently derives the two slowing-down factors.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.